Set default calendar in the ical 5.0.1?

How do I set the default calendar for new events in ical 5.0.1 I just upgraded my iMac to Lion and have migrated to icloud. The calendar that ical currently defaults to is an "unclicked" calendar on My Mac rather than any of the "clicked" (active) calendars on icloud. I tried dragging the preferred default calendar to the top of the icloud calnedar list - that didn't work.
I don't want to totally delete the calendar that is being used as the default, but I certainly don't want it as the default calendar. Any suggestions?

No worries, we all forget the obvious at times
Thanks for the star and have a great day.

Similar Messages

How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

https://www.google.com/calendar/iphoneselect

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

Badi for setting default values in the transaction in APO.

BADI NAME: SMOD_APOCF005 which is used for setting default values in the transaction.
I have implemented the BADI using the below code but that BADI is not triggering. Please can you provide any solution for resolving this.
As per my requirement I am trying to set default values for these three fields RRP_TYPE, WHATBOM, CONVH.
DATA: LS_MATLOC LIKE LINE OF IT_MATLOC.
LOOP AT IT_MATLOC INTO LS_MATLOC.
LS_MATLOC-RRP_TYPE = '4'.
LS_MATLOC-WHATBOM = '5'.
LS_MATLOC-CONVH = '999'.
MODIFY TABLE IT_MATLOC FROM LS_MATLOC TRANSPORTING RRP_TYPE WHATBOM CONVH.
ENDLOOP.
DATA: LS_MATLOCX LIKE LINE OF IT_MATLOCX.
LOOP AT IT_MATLOCX INTO LS_MATLOCX.
LS_MATLOCX-RRP_TYPE = 'X'.
LS_MATLOCX-WHATBOM = 'X'.
LS_MATLOCX-CONVH = 'X'.
MODIFY TABLE IT_MATLOCX FROM LS_MATLOCX TRANSPORTING RRP_TYPE WHATBOM CONVH.
ENDLOOP.

The BADI name: SMOD_APOCF005 .
T.code at APO : /sapapo/mat1
Once we enter in that T.Code with some Product and Location data.
There under PP/DS tab.
Under Planning Procedure there is a field PP Plng Procedure which I want to set as 4
And under Order Creation there is Plan Explosion which needs to be set as 5
And Under Horizons there is PP/DS Horizon which needs to be set as 999.
BADi is implemented and active.
And once the data is CIF from ECC to APO
These default values are not set in the T code in APO and the BADi is not triggering.

Setting default calendar to iCal Server

Can anyone help me figure out how to set up our network accounts (actually PHDs) to automatically use the users' calendars on the server instead of the default 'Home' and 'Work' local calendars? I would like to make it easy for our employees to use their server-based calendar by default, so that scheduling will work properly, etc.
I am using an Advanced setup; I seem to remember reading elsewhere that this is easier in other installations, but hopefully it is also possible somehow in Advanced.
Thanks for any advice on this,
Greg

I haven't found a network setting for that yet. However, you can make event invitations default to the network calendars by closing the heading on the local calendars (on the users iCal). Of course, deleting the local calendars works, too.

Setting defaults for reminders in iCal

Is it possible to set a default for reminder in iCal? I would like to set it at e-mail the day before. However, iCal seems to have a reminder default as an alert (which is simply a pop-up), not e-mail. For every event I creat in iCal, I am having to manually put in the e-mail 1 day before. It doesn't remember the number of days either, because when I choose e-mail, it automatically displays 15 days. I know there's got to be some way to fix this. Any help will be appreciated.
Thanks.
Subbu44

thats what we've been doing. Problem is its gets a bit tedious when you have to constantly go through this process (and it involves a few clicks to do so) each time you open a file or place an image. The usual default is for files to be listed by name so we are not sure how or why all of a sudden it now defaults to "last modified" each time one of these menus is opened. And the defaults are fine ie. files are listed by name when opening folders outside of indesign... its only through indesign that they have reveted to "last modified".....

Re-Set Default Calendar Reader?

Hi All, Quick Question: When I Installed Now Up To Date the OS asked a question "Do you Want to make NUTD your Default Calendar Reader?". Well, I said yes at the time but now I want to change it back to iCal. Does anyone know where the switch is in Tiger to tell the OS to make iCal the Default Calendar Reader? Let me know if you know. Thanks! Larry

Larry,
According to Now Software Support Article ID: 001609, that preference is controlled through the com.nowsoftware.nowuptodate.plist file. Deleting the file should restore your iCal preference.
Delete the file as directed, but do not select NUTD as the default when you open NUTD.
;~)

URM How to set default value in the "New Check-in" - "Folder" field

Hello everyone,
I'm trying to find out how to set the default value for the "folder" field in a check-in profile created using the Configuration Manager. If I browse to the folder in the "Browse Content -> Folders" menu and check-in a file inside the folder, it will fill this field automatically. I need to replicate this behavior using the "New Check-in" drop-down menu and selecting a profile, in other words, associate a Folder with a check-in profile.
I know it was possible to do so in previous versions using the folders_g component, but I'm unable to figure out how to accomplish it with the new FrameworkFolders component.
Any help is greatly appreciated.
Thank you.

Hello,
It is working fine try this.
PARAMETERS :
y_p_list TYPE char32 AS LISTBOX VISIBLE LENGTH 22
                              MODIF ID rsg. .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR y_p_list.
MOVE: text-200 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-203 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-210 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-211 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-204 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-205 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-206 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-207 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-208 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'FIELD'
      dynpprog        = sy-repid
      stepl           = 1
      value           = ' '
      value_org       = 'S'
      display         = ' '
    TABLES
      value_tab       = y_i_listbox[]
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
REFRESH y_i_listbox.

REG: Set default width of the ALV header Text

Hi,
The issue which is reported is .
We have a Custom Z program which needs to display the ALV Output. And also there is a scope to change the Layout,
Now in one of the fields, there is
LOAD_NUMBER.
The length of this header is set to 11 in the Change Layout screen,
Now the issue is, If i want to change the layout and set the default width to 15 char and then save it
1)The ALV layout is saving with the Width as 15 and now i can see
*|LOAD_NUMBER<space><space><space><space>|*
|_________________________________________|
|_________________________________________|
|_________________________________________|
But when i re execute the Z Program, the first time when i go to the Change ALV Output screen, then i still see 11 as the default width,
*EITHER *
I want to get the default width what i have saved previously
OR
I want to set the default width to 15
Please give me suggestions or clues to handle such situations.
NOTE The ALV used is Blocked ALV.
Thanks
Sri

Hi SRIKANTH,
ALV has a very weird feature: The layout is stored in some buffering tables that can not be accessed directly by the user. The buffer is re-generated only once a day when the layout changes.
Just run report BALVBUFDEL once, this may change it.
With ALV, I use the column width optimization feature avoiding trouble like this.
FORM alv_layout CHANGING ps_layout TYPE lvc_s_layo.
ps_layout-sel_mode          = 'A'.
ps_layout-cwidth_opt        =
ps_layout-zebra             = abap_true.
ENDFORM.                    " ALV_LAYOUT
Regards,
Clemens

Setting default size for the information area in the main window

Hi, I wonder if there is any way to change the default size of the information area in the main window (lower left corner). I want it a little bigger because I had some useful information set there and I had to change the size every time I log in.
Thanks in advance.

That part of the interface doesn't have an exposed preference to control.
One thing you could do is reorder your metadata fields within the info pane so the most important are listed first and always visible.

Setting default values at the start of a process

Hello
I need to set some constant values to the attributes in data object as soon as start event of a process is triggered.
How can I do that?
Regards
Vidyadhar

Vidyadhar,
Follow the below procedure to set Default Values
1.Right Click on Start Event select Properties
->Goto Output Mapping Tab
->Double Click on Element on which you want to give Static Value
and enter the value with double codes for eg: "Name"
Make sure that this element value should be has a Input to the next level.
Thanks
Srikanth

Setting default opening date for iCal calendar to be some future date?

Is it possible to set the default date at which an iCal calendar opens to be some specified future date?
I want to enter multiple events for a week-long program that begins on November 1, 2008, into a special iCal calendar for that program, as the dates and times for those events become known between now and then. So, each time I click on that calendar's icon, I'd like to have it open at 1 Nov 08, instead of having to step forward to that date each time I re-open the calendar.
Any way to do this?

christ. no answer to this?
i just did this on a trip to boston and i /thought/ i had it fixed when i went to paris recently.
perhaps getting a new motherboard on my MBP means i have to set my settings again to get this to work? does anyone know if this only works by setting a /combination/ of settings on iCloud and in iCal preferences...?

Setting Default Value to the Quantity Field in ML81n

Hi Gurus,
I have an assignment to set a default value of 1 to the quantity value when creating entry sheet. This is the process we go through before the point of setting the 1:
1. Go ML81n and click on "Other Purchase Order" input some PO number and click enter.
2. On the Menu --> Entry Sheet --> Create --> Empty Page
3. At the bottom of the screen Click on "Service Sel", and click enter if a pop-up shows
4. Now on the line item, select any row (1 or 2 or many). and Click on Services on top.
So at this point when the new screen shows with the new Entry Sheet number, the line Items that comes up should all have a quantity of 1, and should be editable by the user before saving.
How can i go about this. Which UserExit will do this or Enhancement Point. The screen field for this quantity is ESLL-MENGE.
Thanks guys.
Rewards, will be greatly reward.
Edited by: Basil Balogun on Jul 7, 2008 11:03 PM

Hi,
Pls check out this Exit-
package name ML-
SRVESSR->EXIT_SAPLMLSR_010->Set Entry Sheet Header Data.
For this in importing paramertes
I _EKPO type EKPO in this we have MENGE field try to asign value 1 to this.
First check the screen number of the popup screen for which you need to enter the MENGE valuein GUI status. Chck if this screen exit can be used by puting a break-point.
And also try this screen exit for SRVEUSCR-
EXIT_SAPLMLSR_020-Transfer of Data to Entry Sheet User Screen
EXIT_SAPLMLSR_021-Adoption of Data from Entry Sheet User Screen
SAPLMLSR-Screen exit at 0400 subscreen.
Reward if helpful.
Best Wishes,
Chandralekha
Edited by: Chandralekha on Jul 8, 2008 6:41 AM
Edited by: Chandralekha on Jul 8, 2008 6:43 AM

How to set default values in the PO feilds

Hello,
Can please somone let me know how can I default a particular tax code "X" on a Purchase Order at the item level in the invoice tab..
Any help would be greatly appreciated....
Thanks

Dear ,
You can set it in the info record > Purchasing Organization data 1. In standard customizing,the default value for tax exist for LIV module in SPRO-Materials ManagementLogistics Invoice VerificationIncoming InvoiceMaintain Default Values for Tax Codes
Regards,
w1n

Set default calendar in the ical 5.0.1?

Similar Messages

Maybe you are looking for