Set default contect details for call, SMS, e-mail ...

You can set the default detail to use for calls, SMS, e-mail etc.
If you do not do this phone will ask when selecting a contact to write a message.
But to set this you have to edit EVERY contact!
And the list pops up to the first contact each time (so you have to scroll down).
Is there an easier way to do this (can't be set i OVI Suite either).
Also when I transferred my contact from one phone to the new one, these settings were lost :-(
So now I have to set all the default details over again. Annoying :-(
Lars-Erik Østerud - http://www.osterud.name/nokia.html

None that I know of, since it was not added after year on the old iphone I wouldn't count on it. You should get used to just checking the iphone once in awhile for new messages, they will show up the home screen (sms and calls will). Since I use my cell phones as my watch that is what I do, but a simple beep or something indicating a new unread message would be nice when I am at home and don't check it as often while its sitting around some where.

Similar Messages

How to set default file type for Open dialog

Dear my friends,
I am using "At selection-screen ON VALUE-REQUEST FOR filepath" to display open dialog and i want to set default file type for open dialog = *.txt.
Thank your times !

Hello,
U can make use of this code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SP_FILE.
PERFORM SAVE_DIALOG CHANGING SP_FILE G_F_RC.
FORM SAVE_DIALOG CHANGING PO_FILE PO_RC.
DATA: L_VA_BOXTITLE     TYPE STRING,
        L_VA_DEFAULTFILE TYPE STRING,
        L_VA_DEFAULTNAME TYPE STRING,
        L_VA_DEFAULTPATH TYPE STRING,
        L_VA_DEFAULTFULL TYPE STRING,
        L_VA_FILTERTEXT   TYPE STRING,
        L_VA_CODE         TYPE I.
CLEAR: PO_RC, G_F_CONF.
L_VA_BOXTITLE   = TEXT-B01.
L_VA_FILTERTEXT = TEXT-B02.
IF PO_FILE IS INITIAL.
    CLEAR L_VA_DEFAULTFILE.
ELSE.
    L_VA_DEFAULTFILE = PO_FILE.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
    EXPORTING
      WINDOW_TITLE            = L_VA_BOXTITLE
      DEFAULT_EXTENSION       = 'TXT'
      DEFAULT_FILE_NAME       = L_VA_DEFAULTFILE
      FILE_FILTER             = L_VA_FILTERTEXT
      INITIAL_DIRECTORY       = 'C:SAPWorkdir'
    CHANGING
      FILENAME                = L_VA_DEFAULTNAME
      PATH                    = L_VA_DEFAULTPATH
      FULLPATH                = L_VA_DEFAULTFULL
      USER_ACTION             = L_VA_CODE
    EXCEPTIONS
      CNTL_ERROR              = 1
      ERROR_NO_GUI            = 2
      OTHERS                  = 3.
IF SY-SUBRC <> 0.
    PERFORM CHECK_ERRORTYPE(Z48M_MATDATA_UP) CHANGING SY-MSGTY.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    CLEAR PO_FILE.
    EXIT.
ENDIF.
IF L_VA_CODE NE 0.
    MESSAGE S818(3F) WITH TEXT-011.
    CLEAR: PO_FILE, PO_RC.
    EXIT.
ELSE.
    WRITE L_VA_DEFAULTFULL TO PO_FILE.
    G_F_CONF = G_C_XFELD.
ENDIF.
ENDFORM.                    " save_dialog
If useful reward.
Vasanth

Set default grid artwork for composer grid view

As the title I wanted to know if there is a way to set default grid artwork for composer grid view.
Thanks.

Nope. It is the first image from the first track of the first album that has artwork. As you move your pointer over the icon you will get any other images assoicated with that composer.
tt2

Set default directory/path for SaveAs Dialog using WPG_DOCLOAD

Hi, im trying to set the default directory/path for the SaveAs Dialog called by wpg_docload.download_file.
I'm not able to find where I can specify the default path.
Is it something like "htp.p('Content-Disposition: attachment; path=:PX_OUTPUT_DIR" ?
Thx for your help !
Here's a part of my code
owa_util.mime_header( NVL(mime,'application/octet'), FALSE );
htp.p('Content-length: ' || length);
htp.p('Content-Disposition: attachment; filename="'||substr(fileName,INSTR(fileName,'/')+1)|| '"');
owa_util.http_header_close;
wpg_docload.download_file( lobLoc );
/*********************/

I don't believe you're allowed to set the directory path in the Content-Disposition (or any other) header. More accurately, you can set path in the filename, but browsers don't pay any attention to that, they only look at only the terminal filename.
<p>According to RFC 2183, browsers are supposed to ignore any path information sent with the filename. Even though it's dated 1997, I believe this RFC is still in effect.
<p>This was done as a security precaution against malicious web apps that might try to download into a system directory or other dangerous place. Also, browsers (usually) allow users to specify their own default download directories. Further, even if you could specify the path, you'd have to do it for any and all filesystems (Linux, Mac HFS, Mac OSX, Windows, etc etc).

Set default payment terms for BP

Hi,
How do we set a default payment term for all new business partners?

Hi Ricky........
you can set these settings in admin module.
Go to Administration> System Initialisation> General Settings> BP Tab> Payment Terms.....
Regards,
Rahul

Setting default printing presets for all users, esp. guest user

i want to set black/white, two sided printing as the default for all users (9 macs, 30 users on each).
i set up and save this preset as admin, and copy the files
com.apple.print.custompresets.plist
com.apple.print.custompresets.forprinter.nameofprinter.plist
from admin home/library/preferences to the other users preferences-folders.
but logging on to any of the other users, i still dont even get the new preset listed.
i tried entering cups, but there, only the printer setup is editable.
especially i would like to set the custom preset as default for the guest account, without being wiped every log off.
is there any alternative way to do this? i dont want to manually log in to the 300 accounts to change this.

You can do that for new users via a file user.js in the default template folder for new profiles.
C:\Program Files\Mozilla Firefox\defaults\profile\
*http://kb.mozillazine.org/user.js_file

Setting Default Global Settings for Bex Analyzer 7 for all users

We need to set default settings for Bex Analyzer Global Settings when we install SAP-GUI 7.2 in our user's workstations. The current default settings are that all of them are turned off. We would rather not have to run around and change each of our 1,000 user's settings.
Ed:. Apparently [OSS Note 1254112|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1254112] discussed how to adjust Windows Registry settings to resolve this.
Edited by: Charles Belt on Apr 28, 2011 10:01 AM

Just so any one is looking for the correct solution and it worked for me.
Small correction to the information in the OSS note 1254112.
for setting the legacy version setting use the below string in the registry
"LAUNCH_VERSION" = "LEGACY" insted of "LaunchLegacyVersion"
Kiran

Set Default Price List for a BP

How can we set a default price list for business partners of type customer?

RIcky, Whatever you set in the PaymentTerms->list is the default list for that customer.
If you want default for all customers perhaps to make it easier while you create a new customer, I would just pull up a customer right click and duplicate. Hopefully you have original customer's price list there.
Admin->SystemInit->Document Setting has default Base price used for profit calculations.
It is little dangerous to assign default price list to all customers, as by mistake, they may end up getting discounts they are not supposed to get!

Setting default export quality for PDFs in Pages 5.0

Hi,
Anyone know if it is possible to set a default export quality for PDFs in Pages 5.0. Even if it remembered the last used setting that would be helpful.
Thanks,
Nick

OK, I have managed to get higher quality images from the PDF renderer. Here is what I have found:
1) The PDF renderer in Reporting Services 2005 will size all images that it is given at 96 DPI no matter what DPI the image is when you pass it to the renderer. That means that a 300 DPI image or even a 600 DPI image will be sized in the PDF as if it is only 96 DPI. That means your high DPI image will render much larger than you expect.
So you might expect a 300 DPI image that is 6.5 inches wide to render properly at 1950 pixels. Yet, the PDF renderer will size it as it were 96 DPI which would make the image 20.3 inches long!
2) There is good news though. Despite sizing the images as if they were 96 DPI, the PDF renderer appears to render higher DPI images at a higher quality than 96 DPI. So despite the sizing being wrong, the image actually is rendering at a higher quality.
This means that you should size the image to the proper number of inches based on 96 DPI calculations. Then you can use Bitmap.SetResolution to set your images to at least 300 DPI. That should give you a higher quality image that is the proper number of pixels to fit properly in your report.
I am able to do all of this sizing dynamically because I am using objects as my data sources, but I am sure there are VB functions you could use in the report itself to accomplish the same task.
It is late, and I've been at this project all day long, so forgive me if I have explained anything poorly or gotten any concepts long. Yet, at this late hour, I believe this is what the renderer is doing.
I hope this helps someone else in the future, or at least points them in the right direction.

Setting Default GUI Properties for Opened Files?

OK, so you can set up a template for AIs you create yourself, to include things like Layer Panel thumbnail size etc, but can this be done for opened files?
I work on a very large screen and always want to increase the layers panel thumbnail size, but it's a few clicks to do it, and I'd like to be able to set this value for all opened files, if this is possible. The default thumb. size is way to small and always needs bumped up.
Are these values stored in the AI (since templates are simply AI files) or can a default value be set? if so, how can I do this?
Thanks
Richard

You cannot change this for all opened files, as this is a per document setting unfortunately.
To make a new document profile as per Monika open one fo the profiles here:
Users/ Username/ Library/Application Support/Adobe/Adobe Illustrator CS4/en_US/New Document Profiles
Change your thumbnail size to larger, then save over that profile
When you make a new document choose that profile.

Setting default volume level for Java Desktop

Hello,
I am running Sol 10 11/06 for sparc. How do I permanently set the default volume level for the Java desktop? If I change the volume manually and "save settings" on logoff, the saved setting is not saved after a reboot, after which I have to set it again.
Thank you......

Annoying, isn't it?
Unfortunately the only thing you can do is lower your system volume before opening those pages. The volume could be controlled by the Web page author but most are clueless.

How to set default email address for contact with multiple addresses.

Apologies if this has been asked before, it seems a very basic question but I'm unable to find an answer.
Can a default address be set in Address Book for a contact with multiple addresses? Or if not, which address does it send to "automatically" when this condition exists? I know you can manually select the address you want to use, but what if the contact is added to a group?
Thanks
Denis

Thanks for the reply, buy I have no idea what this means.
I have the same question. I have a contact that has five email addresses. When I add the person to a group, Mail automatically selects one of the addresses, but not the one I want. I need to go back and manually select the correct address. Can't I select one of these addresses as the default to be used all the time?
Apologies for not quite understanding the first reply.

Set default mouse speed for guest user?

Anyone know how, where to set a default mouse speed for all users. I have an iMac running Maverick. I set my personal mouse speed near the highest. The default speed is the same slow pace for the guest profile and I would like to change and KEEP it a little faster. Currently when I log out of guest account, all settings, files, etc are deleted. I am admin so ... anyone? Help? Something akin to the windows registry? I'm a newbie to Mac OS X, but learn quick.

Hi,
Try with SHD0 (Transaction and Screen Variants) .
Regards,
Venkat.

How to set default file permissions for applicatio...

I have the nokia n86 and was wondering if there was any way of setting the file permissions of a program via the phone. To put it in context, i downloaded a program that edits photos but everytime i try to load a picture from my phone it asks me (for every single folder in my phone, not just the photo ones) if the program can open it. I can be there clicking yes all day as i there is a lot of folders and subfolders on the phone. I know sony ericssons had an option where you could select the programs permissions to always ask or never ask but i cant seem to find a similar option on the nokia.
Does anyone have any ideas?

Same issue here. Everything I put on the drive is set to Read-only for the group.

Set Default Opening Application for a certain type of file?

I need some help saving time! I have lots of .groovy files that my apple doesn't know how to open and i have to select a default opening application for every single file! Is there a way to do this for multiple files or for a certain file type? thanks!
amber

Sure. Click on a file, and then go to File-Get Info (or CMD-I) In the box that pops open, choose the app you want the .groovy files to open with, and click change all. That should do it.

Set default contect details for call, SMS, e-mail ...

Similar Messages

Maybe you are looking for