Set Default QT Export?

I'm selecting various clips throughout my timeline to send to disk, is there a way to set the "File > Export > QuickTime Movie... > Setting" to something other than "Current Settings?"
For instance, at the moment I'd like it to default to "ProRes 1920x1080 24p"

@ Rienk - That isn't my issue, what I was looking for was to have the last setting I selected (either in Batch Export or in QT Movie Export) "Stick" so when I go to do the next set I don't have to re-select all of my settings.
@ Nick - Not a good thing in this case. I need to send out QTs that have the speed change "baked-in" and convert the format(to ProRes, so the Color Grading session using "Color" doesn't choke. I changed my Sequence: "Settings > QuickTime Video Settings > Compressor" to ProRes, but the "Current Setting" seems to stick to the original clip's capture format (XDCAM EX).

Similar Messages

Set default File Export Form for Communication Medium?

Hi,
Does anyone know whether it's possible to set a default File Export Form for Communication Medium.
For example, I created communication medium 'Direct Mailing'. Everytime when a user selects this communication medium in a Marketing Campaign, I would like the File Export Form 'Z_DIRECT_MAILING' to be selected automatically. Is this possible?
Regards,
Jeroen

@ Rienk - That isn't my issue, what I was looking for was to have the last setting I selected (either in Batch Export or in QT Movie Export) "Stick" so when I go to do the next set I don't have to re-select all of my settings.
@ Nick - Not a good thing in this case. I need to send out QTs that have the speed change "baked-in" and convert the format(to ProRes, so the Color Grading session using "Color" doesn't choke. I changed my Sequence: "Settings > QuickTime Video Settings > Compressor" to ProRes, but the "Current Setting" seems to stick to the original clip's capture format (XDCAM EX).

Setting Default for Export Original?

~
This may sound like a nit-picky problem, but it has bugged me for years nonetheless.
I Export Originals to my desktop to work on them in Photoshop, later placing the final product into Aperture. (3.5.1) Whenever I choose Export Original, the dialogue box comes up with certain settings for a Custom Name export (screen capture below.)
What I'd like to do is to have this dialogue pop up with settings to keep the original filenames, as in:
My issue is that every time I open Aperture anew, this dialogue reverts to the "Custom Name" settings, and I have not been able to find a way to get the "Original File Name" settings to stick.
Is there some way to set this dialogue to always pop up with the Original File Name settings, so that I don't have to always change them every time I use the dialogue?
Thanks!
Rob

OT:
léonie wrote:
much more irritating, the size of the application window. No trashing of prefs makes my Aperture main window stay as small as I want it. It will always cover the whole screen, when Aperture launches, and only leave a small gap for the Dock to show
I got nothing . I run apps in windows as big as possible almost all the time. I use Many Tricks' Moom for window control -- worth a look (free trial), though I dont think it has a size-on-launch over-ride. Fwiw, the only advantage to me of the now-finished trend towards 16:9 screens is that it gave me room to put and hide my Dock on the left side, freeing up valuable top-to-bottom screen pixels.
(Added:) Just made the Aperture window as small as it would let me, closed Aperture, logged out, logged back in, opened Aperture: window opened in exact same position at the same size it was when I closed it. .
Message was edited by: Kirby Krieger

Set default for iPhoto export

How can I set the default for exporting photos from iPhoto to Desktop instead of the Pictures folder?

Not with iPhoto 11 and 10.7
For years I have used this system enhancement for these sorts of issues in every app:
http://www.stclairsoft.com/DefaultFolderX/
No connection with the makers, just a happy customer...
Regards
TD

Set Default Printer based on user setting using Powershell script

Hi
I would like to create a script that runs on user log off and captures the default printer (set manually by the user) and then another script to reapply the settings (saved upon log off) when the user logs back in.
This is because local printers are set as default printer (PDF Creator Programs) when we all use Network Printers so this means a user has to set default printer to the network printer all the time.
I have found this script to start with:
$Printer = Get-WmiObject -namespace root\cimv2 -Query “select * from Win32_Printer Where Default = TRUE” -Impersonation 3 | select name | out-file C:\temp\Printer.txt
But the out file looks like this:
name
\\PrinterserverName\Accounts01
Which I dont see how it can be used on another script plus there are spaces after\Account01
Any Ideas please?
M
Maelito

Hi Maelito,
According to your description, you want to export the default printer name to text file, then read this printer name from text file and set the default printer via Powershell:
#save printer name to text file
Get-WmiObject -namespace root\cimv2 -Query “select * from Win32_Printer Where Default = TRUE” -Impersonation 3 | select -ExpandProperty name | out-file C:\temp\Printer.txt
# read printer name from text file and set default printer
$name=get-content C:\temp\Printer.txt
(Get-WmiObject -Class Win32_Printer -Filter "Name='$name'").SetDefaultPrinter()
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do you set default programs for all users when deploying Windows 8.1?

I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
to be the default for opening pictures, videos, etc. Can that be done?

Great question, this has been bugging me too!
So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
After filtering out the junk, I could see some *interesting* writes to the registry:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
"Hash"="57y87/ogggU="
"ProgId"="PhotoViewer.FileAssoc.Jpeg"
But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers. This is both good news and bad.
Background:
One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
Solution:
This blog appears to have the answer:
http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
From:
<Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
To:
<Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
perhaps seperate GPO's for Desktops/Laptops vs Tablets?
-k
Keith Garner - keithga.wordpress.com

Set Default Values in Listbox with Dialog Programming

Hi all,
I am stuck with a problem i.e I am working with Dialog Programming Screen
where i have to set default values in some n numbers of Listbox which i have created on Screen.
This default value is needed to be fetched from database table.
I am using single table. Hence no confusion that i have to first fetch data from 1st listbox then corresponding data is fetched into second & so on ..NO NO This is not required.
Simple one screen which will update a table in database, where some fields on the screen needs to be default set as per tables domain default values set while table creation.
Please help me out in this.
Thanks & Regards,
Sandhya.

Please search SDN, before you post a new forum from next time... any ways just follow the below code..
u need to use the FM 'VRM_SET_VALUES' to implement list box in module pool. Check the below code. u have to write this code in PBO..
if c = 0.
select land1 landx from t005t into table wi_country.
sort wi_country by land1.
delete adjacent duplicates from wi_country comparing all fields.
loop at wi_country.
wa_ctry-key = wi_country-land1.
wa_ctry-text = wi_country-landx .
append wa_ctry to wi_ctry.
endloop.
call function 'VRM_SET_VALUES'
exporting
id = 'ZCUST_MASTER1-COUNTRY'
values = wi_ctry
exceptions
id_illegal_name = 1
others = 2
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
c = 1.
endif.
Hope this helps u,
Regards,
Rajesh

Set default filter

Hello,
could you please help me find the way to set default filter over a specifed colum in CRM 7.0 on a table view? It should work just like a manual created filter, but it should exists already by first call of a view with table.
I tried following but without success:
iterator->filter_by_property( iv_attr_name = 'XXX'
                               iv_value = 'XXX' ).
and implement it following menthods for context for view with should have mentioned filter:
getter for field
do_prepare_output
do_init_context
but it didn't work... Method is executed and it look like everything works fine, but as result the filter is not created....
thanks

Hi Juzio,
You can as well try using the following code in DO_PREPARE_OUTPUT method.
Filter the table with BTPARTNER according to filter values
IF lv_default_filter EQ abap_true.
                 me->typed_context->BTPARTNER->set_filter( EXPORTING iv_attr_name = 'PARTNER_NO' iv_value =
              lv_filter_member )."#EC NOTEXT
         ELSE
            me->typed_context->BTPARTNER->delete_filter( ).
          ENDIF.
You can reset the flag lv_default_filter in the DO_HANDLE_EVENT method of the view controller when the event 'filter'
is triggered from the table filter by the user.
Regards,
Leon

Character set in MDL export/import

Hi,
we are running OWB 10.1.0.2. In order to get version control, we perform MDL exports of collections from our development environment and then import them into our test and production environments. Each environment uses its own design repository, but all repositories are in the same database.
When doing an export of a collection, we always specify the character set AL32UTF8 because that is what we are running in the repository database. When later doing an import using the graphical user interface, it is not possible to specify the character set (but this can be done when using the import utility). According to the documentation, the GUI import will then assume that the character set in the collection is the character set of the client, which usually is WE8MSWIN1252. (The documentation also says that it IS possible to specify the character set during GUI import, this is obviously a documentation error).
My questions are: What is the point of specifying character set when doing exports and imports? Could an AL32UTF8 export followed by an WE8MSWIN1252 import cause problems? I assume that the character set used by export is specified in the collection file, so does the import then convert it to WE8MSWIN1252 (or the character set specified in the import utility)?
Or, to be more general: What is actually happening with the character sets during MDL export/import?
/Kjell Gullberg

Dear ski123,
I think you are not going to loose any data of yours when you migrate the database. You may proceed to the import.
Please find below documentations;
http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/install003.htm#sthref81
For Database Character Set, select from one of the following options:
    *Use the Default—Select this option if you need to support only the language currently used by the operating system for all your database users and your database applications.
    *Use Unicode (AL32UTF8)—Select this option if you need to support multiple languages for your database users and your database applications.
    *Choose from the list of character sets—Select this option if you want the Oracle Database to use a character set other than the default character set used by the operating system.Choosing a Character Set;
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch2charset.htm#NLSPG002
AL32UTF8;
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/glossary.htm#sthref2039
Hope That Helps.
Ogan

How to set default file type for Open dialog

Dear my friends,
I am using "At selection-screen ON VALUE-REQUEST FOR filepath" to display open dialog and i want to set default file type for open dialog = *.txt.
Thank your times !

Hello,
U can make use of this code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SP_FILE.
PERFORM SAVE_DIALOG CHANGING SP_FILE G_F_RC.
FORM SAVE_DIALOG CHANGING PO_FILE PO_RC.
DATA: L_VA_BOXTITLE     TYPE STRING,
        L_VA_DEFAULTFILE TYPE STRING,
        L_VA_DEFAULTNAME TYPE STRING,
        L_VA_DEFAULTPATH TYPE STRING,
        L_VA_DEFAULTFULL TYPE STRING,
        L_VA_FILTERTEXT   TYPE STRING,
        L_VA_CODE         TYPE I.
CLEAR: PO_RC, G_F_CONF.
L_VA_BOXTITLE   = TEXT-B01.
L_VA_FILTERTEXT = TEXT-B02.
IF PO_FILE IS INITIAL.
    CLEAR L_VA_DEFAULTFILE.
ELSE.
    L_VA_DEFAULTFILE = PO_FILE.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
    EXPORTING
      WINDOW_TITLE            = L_VA_BOXTITLE
      DEFAULT_EXTENSION       = 'TXT'
      DEFAULT_FILE_NAME       = L_VA_DEFAULTFILE
      FILE_FILTER             = L_VA_FILTERTEXT
      INITIAL_DIRECTORY       = 'C:SAPWorkdir'
    CHANGING
      FILENAME                = L_VA_DEFAULTNAME
      PATH                    = L_VA_DEFAULTPATH
      FULLPATH                = L_VA_DEFAULTFULL
      USER_ACTION             = L_VA_CODE
    EXCEPTIONS
      CNTL_ERROR              = 1
      ERROR_NO_GUI            = 2
      OTHERS                  = 3.
IF SY-SUBRC <> 0.
    PERFORM CHECK_ERRORTYPE(Z48M_MATDATA_UP) CHANGING SY-MSGTY.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    CLEAR PO_FILE.
    EXIT.
ENDIF.
IF L_VA_CODE NE 0.
    MESSAGE S818(3F) WITH TEXT-011.
    CLEAR: PO_FILE, PO_RC.
    EXIT.
ELSE.
    WRITE L_VA_DEFAULTFULL TO PO_FILE.
    G_F_CONF = G_C_XFELD.
ENDIF.
ENDFORM.                    " save_dialog
If useful reward.
Vasanth

Feature Request: Make a Setting Option for Export - Media - What to Render

As I just changed after many years with Premiere Elements to Pro, I certainly find many things just anconversant.
But there's one thing I really can't take: When I'm trying to render a project, there's a small selection list near the bottom of the "Export Media" window saying "export area". Here I can choose between "complete sequence", "work area", "sequence in/out" and "defined by user". This option jumps always back to "work area"!
That's at least for me very unconveniant, because in 99+ % of my renderings, I need "complete sequence". Normally the software remembers the last used setting, but not in this case. I can imagine that one can fight about what's the best default setting: I Guess everyone is using Premiere differently. So in my opinion a predefined setting option would solve best for all: Just add one mor setting in the Presets section, maybe in "General" or make a new rubric "Export" or something. Just a place where everyone can predefine which setting for the export media area option he likes.
No big deal, just one more presettings option!
I hope I could make myself clear what I'm meaning
Thanks in advance!

Hi Lutzz,
When I'm trying to render a project, there's a small selection list near the bottom of the "Export Media" window saying "export area". Here I can choose between "complete sequence", "work area", "sequence in/out" and "defined by user". This option jumps always back to "work area"!
That's at least for me very unconveniant, because in 99+ % of my renderings, I need "complete sequence".
You can create a feature request here: http://adobe.ly/feature_request
Thanks,
Kevin

Set Default Value In list box

Dear All,
               I am using the F4IF_INT_TABLE_VALUE_REQUEST this FM for filling the list box .Now i want to set default value in the list box
Example-
Supose i have 2 List box A & B and in list box i have to set default value in A list box X value and in B list box Y value .
X and Y value is coming in the list box from the master table .
Thanks & Regards

Code Snippet for your referance:
*F4 Help for Output Type
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_KSCHL
DATA: l_repid TYPE syrepid,
        l_dynnr TYPE sydynnr.
MOVE: sy-repid TO l_repid,
        sy-dynnr TO l_dynnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'KSCHL'
      dynpprog        = l_repid
      dynpnr          = l_dynnr
      dynprofield     = 'P_KSCHL'
      window_title    = text-001
      value_org       = 'S'
    TABLES
      value_tab       = it_value_tab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3

Bugreport: Build Option Flag "Default on Export" not copied to Translation

In a multilingual environment the Build-Option Flag "Default on Export" seems to be nulled when publishing the translations.
The main application has the correct Default on Export-Flag, but the translations don't.
This leads to the result that after publishing and exporting the build option is excluded in the main application but included in the translations.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at

Joel,
thanks for confirming.
For now i'm using another one of my "dirty" workarounds: after publishing the translations i do an Update on APEX_040000.WWV_FLOW_PATCHES and set the DEFAULT_ON_EXPORT to the value it should have.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at

Set Default Value of Multi-select list item

I have a multi-select list item I want to default the value of to '%' (which is really '%null%') and have it selected. I tried setting default value of item, but it doesn't take '%null%'. I also tried a computation with a static of
:P507_ITEM := '%null%'; How do you get the default value set and selected?

Hi
Shijesh is right, you need to change your null return value and use that return value as your default. Try and use something of the same datatype as your real return values if you plan to use '%' to display all as it will make your queries simpler. eg.
Company A returns 1
Company B return 2
% returns 0
Then your query would be...
SELECT ...
FROM ...
WHERE company_id = DECODE(:P_COMPANY,1,1,2,2,0,company_id)
Hope this makes sense.
Cheers
Ben

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Set Default QT Export?

Similar Messages

Maybe you are looking for