Set Default Tab For A Step

We have a system that has been installed at a couple of affiliate sites in Japan and Romania (we've been developing in Australia). It runs on TestStand 4.2 with supporting code written in LabVIEW 8.6 (although the Romanian site uses TS4.2.1 and LV2010). We have numerous custom steps in a types palette file.
One of the sites has complained that when they add some specific steps (custom Numeric Limit Tests, in particular) to a sequence, the tab shown in the Step Settings pane is the "Limits" tab. It would be more convenient and more useful to show the Edit tab (the one that shows the buttons for the Edit sub-steps).
I realise it's just a matter of clicking on the relevant tab. I also realise that once a file is saved, the last-selected tab is shown for each step when it's re-opened. However, the customer is always right, so I need to see if it can be "fixed".
Is there a way of setting the default tab for a custom Numeric Limit Test step to something other than the "Limits" tab?
Help files, Google and the NI pages don't seem to be forthcoming on this issue.
Thanks,
Geoff
Geoff Field, BE, CLAD, MIEAust
Professional geek, amateur stage-levelling gauge
Solved!
Go to Solution.

Thanks Rohama,
I will mark the issue as "not fixable" and be done with it.
Regards,
Geoff
Geoff Field, BE, CLAD, MIEAust
Professional geek, amateur stage-levelling gauge

Similar Messages

Set default tab for Document Properties windows

Greetings!
Once I open a PDF document and go to File > Properties I always get the Security tab open by default:
Can you suggest me a way to change tab displayed by default to the other one, for example Description please?
Thank you!

Oh. This is a logic.
I used to click to closing X at the top right.

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

[svn:fx-trunk] 12909: Pre-FP10.1, set default tab stops in TLF.

Revision: 12909
Revision: 12909
Author:   [email protected]
Date:     2009-12-14 10:33:13 -0800 (Mon, 14 Dec 2009)
Log Message:
Pre-FP10.1, set default tab stops in TLF. Without this, if there is a tab and TLF is measuring width, the tab will measure as the rest of the remaining width up to 10000.
QE notes:
Doc notes:
Bugs: SDK-24589
Reviewer:
Tests run: checkintests
Is noteworthy for integration: yes
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24589
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as

SpryAccordion.css
You have an error that is killing the rest of your code shown below in red. Remove it.
.AccordionPanelContent {
    margin: 0px;
    padding: 2px; /**suggest using 12px or more**/
    background-image: url(../infobkgd.png);
    background-attachment: fixed;
    background-repeat: repeat;
    font-family: Verdana, Geneva, sans-serif;
    font-size: 12px; /**suggest using 16px or more**/
    color: #FFF;
    overflow: hidden;
    height: 40
[x;
    height: 100%;
Nancy O.

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Extending flash: how do I set default values for filenames

Hi,
I am trying to set default values for filenames
<choosefile> and <popupslider>s that will show up when
my XMLpanel first loads in my jsfl extension file. It seems that I
can only set default values for textbox items.
How do I do this for filenames and popups?
As a workaround, I also tried using a flash object dialog box
to look like a <choosefile>, or any jsfl command, but then
how do I return those values back to the XMLpanel that calls them.
and pass the data back to my jsfl script.
lemme know if you know a way,

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

Set default value for parameter fields

Good day!
Situation:
1. I have 2 parameter fields in reports (dateFrom and dateTo)
2. Before running report in ASP.NET I change value this fields (dateTo = today, dateFrom = today - 3 days)
3.I use for this source:
foreach (ParameterField crParam in CrystalReportSource1.ReportDocument.ParameterFields)
                        CrystalDecisions.Web.Parameter crParametr = new CrystalDecisions.Web.Parameter();
                        string ParametrName = crParam.Name;
                        crParametr.Name = ParametrName;
                          crParametr.DefaultValue = ActionReportParameter.GetParametrValue(ReportName, ParametrName);
                         CrystalReportSource1.Report.Parameters.Add(crParametr);
4. And repurt run without request value parameter fields.
5. BUT!!! now I need request value parameter fields before report start running - I want set default values for filelds and offer user change its before report start run.
How do this?
Thanks

I believe you need to create your own parameter promt screen. Capture what the user entered and pass that to the report(?).
slv

Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

The javescript in below link works for me.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
However, I'd like to set default user for people picker only when user checks a checkbox.
I am new to development. Could you please help me on this requirement ?
Thank you very much.

Hello,
Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How can I set default values for Allocate Mode in AO config?

Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
Solved!
Go to Solution.
Attachments:
generateWaveformFIFO.vi ‏15 KB

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

Setting Default Preferences for All Users in Crystal Reports Server 2008 v1

We are currently looking to set the default preferences in the CMC for all of our users.
I did locate this page Link: [How to set default preferences for all users in Infoview 3.1/CRS 2008]
The first part of the thread did seem promising but I am unable to find the sample .jsp code that people recommended.
I would assume that this scenario is common enough that someone knows a way to set universal preference defaults.
Thank you

I thought I could just run it too but when I attempt to I get a Windows Script Host error:
Script: C:\User Prefs.vbs
Line: 1
Char: 1
Error: Expected statement
Code: 800A0400
Source: Microsoft VBScript compilation error.
I noticed the first most line seems to be markup for a web interface though I am not familiar with vbs so I may be wrong. I used the publishing wizard to put the script on the CMC to attempt to run it through the CMC but it still does not work.

Is there any way we can set default value for a Date Attribute to current date in Master Data Services

Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.

Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible .

Setting default values for item in opportunity mgmt(crmd_bus2000111)

Hi All,
I need to set default values for the field Fiscal Quarter in item level using BADI CRM_CUSTOMER_I_BADI .This Field is created using EEW. The default value is like if the date is nov-2007 the value for this fiscal period is FQ4-2007 .
Any clue would be great help..

Why don't you try setting the default value in the List next to the Matrix - item 107
Item 107 is a matrix (a transposed one), I have no idea what list you mean... I am using item 107, not 112. Item 112 is used only to detect a click on the "Add Record" button, which is the last row of the matrix 112.
I don't see the gender column in the grid and I'm also unsure of the id you have for it "12" - are you sure it's correct ( i usually use Item("columnName") )?
Sorry for the confusion. "12" is the name of the standard column "Password" which we have renamed to store the gender.
Anton

Set Default Tab For A Step

Similar Messages

Maybe you are looking for