Set default value for parameter fields

Good day!
Situation:
1. I have 2 parameter fields in reports (dateFrom and dateTo)
2. Before running report in ASP.NET I change value this fields (dateTo = today, dateFrom = today - 3 days)
3.I use for this source:
foreach (ParameterField crParam in CrystalReportSource1.ReportDocument.ParameterFields)
                        CrystalDecisions.Web.Parameter crParametr = new CrystalDecisions.Web.Parameter();
                        string ParametrName = crParam.Name;
                        crParametr.Name = ParametrName;
                          crParametr.DefaultValue = ActionReportParameter.GetParametrValue(ReportName, ParametrName);
                         CrystalReportSource1.Report.Parameters.Add(crParametr);
4. And repurt run without request value parameter fields.
5. BUT!!! now I need request value parameter fields before report start running - I want set default values for filelds and offer user change its before report start run.
How do this?
Thanks

I believe you need to create your own parameter promt screen. Capture what the user entered and pass that to the report(?).
slv

Similar Messages

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

Setting default value for form field assoc with a table column

On a "Create Record" situation I was trying to set the default values of some form fields using a page level "Process". These form fields have Source Type = Database Column. It wasn't working, I could only set non-db assoc form field values no matter when the "Process" was set to exec. From some other posts it seems that this is by design, ie. not being able to programatically set the initial values of form fields that are sourced to db columns. I was hoping to have just one "Process" that would exec to set these initial values in one place rather than scattered about for each field that needed a default value. These particular default values come from ref tables and may be different for each user.
So, it looks like I have to use a "Default Value" plsql chunk for each field on the form itself or else set their value on the calling form's Redirect in the "Set these Items" area.
Is this correct?

You could define a database function which accepts the name of the item and the user ID of the user running the application. Based on the item name and the user ID have the function return the appropriate initial value. Invoke this function in a "Default Value" PL/SQL block.
Does that help in centralizing your initial values? You could have one function per page or one function per application. I would do one function per application.

Setting default values for item in opportunity mgmt(crmd_bus2000111)

Hi All,
I need to set default values for the field Fiscal Quarter in item level using BADI CRM_CUSTOMER_I_BADI .This Field is created using EEW. The default value is like if the date is nov-2007 the value for this fiscal period is FQ4-2007 .
Any clue would be great help..

Why don't you try setting the default value in the List next to the Matrix - item 107
Item 107 is a matrix (a transposed one), I have no idea what list you mean... I am using item 107, not 112. Item 112 is used only to detect a click on the "Add Record" button, which is the last row of the matrix 112.
I don't see the gender column in the grid and I'm also unsure of the id you have for it "12" - are you sure it's correct ( i usually use Item("columnName") )?
Sorry for the confusion. "12" is the name of the standard column "Password" which we have renamed to store the gender.
Anton

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Extending flash: how do I set default values for filenames

Hi,
I am trying to set default values for filenames
<choosefile> and <popupslider>s that will show up when
my XMLpanel first loads in my jsfl extension file. It seems that I
can only set default values for textbox items.
How do I do this for filenames and popups?
As a workaround, I also tried using a flash object dialog box
to look like a <choosefile>, or any jsfl command, but then
how do I return those values back to the XMLpanel that calls them.
and pass the data back to my jsfl script.
lemme know if you know a way,

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

The javescript in below link works for me.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
However, I'd like to set default user for people picker only when user checks a checkbox.
I am new to development. Could you please help me on this requirement ?
Thank you very much.

Hello,
Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How can I set default values for Allocate Mode in AO config?

Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
Solved!
Go to Solution.
Attachments:
generateWaveformFIFO.vi ‏15 KB

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

Is there any way we can set default value for a Date Attribute to current date in Master Data Services

Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.

Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible .

How to set default value for vc2_255_arr in plsql parameter directive?

Hi,
I would like to set a default values for a plsql parameter which is of vc2_255_arr type. How to do that?
Below is the example from PL/SQL Server Page.
+" To set a default value, so that the parameter becomes optional, include a default="expression" attribute in the directive. The values for this attribute are substituted directly into a PL/SQL statement, so any strings must be single-quoted, and you can use special values such as null, as in the following example:+
+<%@ plsql parameter="p_last_name" default="null" %> "+
My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"
*<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" %>*
Thanks in advance!
kwong

My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
   type vc2_255_arr is table of varchar2 (255)
                          index by binary_integer;
   vc2_255_arr_default   vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
   vc2_255_arr_default (1) := 'abc';
   vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
   arr   pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
   for i in 1 .. arr.count
   loop
      dbms_output.put_line (arr (i));
   end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %>

Can you set default values for person/group picker fields? To current user?

Two-part question/issue . . .
Part 1:
In InfoPath 2013 in use with SharePoint 2013, how do you set a Default Value for Person/Group Picker fields? Other field types like Text Boxes have a Default Value section in the Data tab of Properties. There doesn't appear to be any equivalent for
the Person/Group Picker field type in Properties. I'd like to set a default person for a few fields in a form I've created. Is this possible?
Part 2:
The default user I want to set for one of those Person/Group fields is the "current user." I want a user to log into our SharePoint 2013 intranet, load a new form for edit/creation, and have one of the Person/Group fields in that form to
automatically populate this particular user. Is this possible?

Hi Stephen,
You can auto populate your InfoPath farm with current user Name and all other property that you have in your User profile, you have couple of options.
First you can make a secondary connection in your InfoPath form with user profile and can use the UserProfileService.asmx and call the GetUserProfileByName method. Here is the steps you can follow.
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
Secondly you can use JQuery and SPServices ,
$().SPServices.SPGetCurrentUser function to populate the values with script to achieve the same in this case you no need to use InfoPath form just create simple text type column in SharePoint
list and auto populate it with getting the current user Name from User Profile here is the scripts
<script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery-1.4.2.min.js"></script>
<script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery.SPServices-0.5.4.min.js"></script>
<script language="javascript" type="text/javascript">
$(document).ready(function() {
var userCurrentName = $().SPServices.SPGetCurrentUser({
fieldName: "CurrentUser"
$("input[Title='CurrentUser']").val(userCurrentName);
var userPhone = $().SPServices.SPGetCurrentUser({
fieldName: "WorkPhone"
$("input[Title='Phone']").val(userPhone);
</script>
Krishana Kumar http://www.mosstechnet-kk.com

Set default value for parameter fields

Similar Messages

Maybe you are looking for