Set default value to currency in oppt header!!
hello friends
On the opportunity header data under frame forecast field total contracted value for the field currency we would like to have EUR as a default value, How is it possible??
Please provide your helpful suggestions.
Many thanks
pankaj arora
Hi,
If you would like to default the currency, you could do this by assigning
the currency to the Business partner and use the same business partner
in the transaction?
You would have to maintain the appropriate business partner
master data to use this.
The user would create a new opportunity, enter the sales prospect,
organizational data determination would take place and the currency
would be populated with the currency in the sales area dependent data
from the business partner master data.
Alternatively you can use the BADi CRM_OPPORT_H_BADI.
In order to implement this functionality, you should fill the currency
in the OPPORT_H segment. A BAdI implementation can be used for the
OPPORT_H merge i.e. BAdI CRM_OPPORT_H_BADI interface CRM_OPPORT_H_MERGE.
At this point fill currency in the pricing segment and appropriately
fill and call the PRICING_MAINTAIN_OW.
Regards, Gerhard
Similar Messages
-
Pass variable and set default value based on user's group
Hello
I'm using SharePoint 2010 and SQL 2012. I need to send a variable to the page and based on its value, set default value for a drop down list and send it to other web part to filter the data. Is it possible for certain users to send that value as a default
and limit user to see only this value in the text field or drop down list; for others - to allow to see the drop down list, but also set the default value for that list?
The main page was designed in SharePoint designer, using web parts (aspx page). I had setup a connection to Active Directory and already have the code to get user's groups and based on their group, I have that variable pulled into the web page for further
use. But I don't know how to pass that value as a default value to the web part (currently using SharePoint Filter web part). When I tried to set a default value for the web part - it automatically puts the quotation marks around the name of the variable
and shows it as a text instead of showing the value of the field.
Thank you!
P.s. I have limited knowledge of SharePoint and need guidance (links, examples, recommendations)!
Alla SandersThank you for your response. I'll try to give you more details. On PageA I check user's groups and based on the group, assign the value and pass it to the next page (no input from the user, all done behind the scene and user is redirected to PageB).
On the next page I read that value and would like to send it to the SharePoint List Filter Web as a default value, as well as send it to another web part that displays the list from SQL, filtered using that default value. Ideally, if the user is from Group
A, I'd like for them to have only one value in that drop down list; if user is from Group B - give him drop down list with 40 items to choose from. Below there is a part of the code and variable fnum has the value from PageA (if I print the value on the screen
- I do see that it has correct value, so the code that gets groups from Active directory works correctly). If I assign fnum as a default value of the list, it shows "fnum" instead of the value of variable fnum. I connect to SQL database, using external
content - so the other list that I'm filtering based on the value in that drop down list - is XSLT Data View Web part. I also have 2 more filters on that page, that user will have full access to and based on their input, it is also sent to the XSLT web part
to filter out more data. Since one of the filters is the date and I am filtering data starting from the date that user chooses - XSLT is the only web part that I was able to make it work with.
I looked at the link you provided (thank you). It is using Content Query Web part. Will it work with external content, as well as accepting multiple filtering, including custom starting date? I appreciate your help!
<%
string fnum = Request.QueryString["field1"];
%><table cellpadding="4" cellspacing="0" border="0" style="height: 1000px">
<tr>
<td id="_invisibleIfEmpty" name="_invisibleIfEmpty" colspan="2" valign="top" style="height: 101px">
<WebPartPages:WebPartZone runat="server" Title="loc:Header" ID="Header" FrameType="TitleBarOnly"><ZoneTemplate>
<WpNs0:SpListFilterWebPart runat="server" FilterMainControlWidthPixels="0" RequireSelection="False" ExportMode="All" PartImageLarge="/_layouts/images/wp_Filter.gif" AllowHide="False" ShowEmptyValue="True" MissingAssembly="Cannot import this Web Part." AllowClose="False" ID="g_1ccc4bca_3ba1_480b_b726_adfdb1e9e02d" IsIncludedFilter="" DetailLink="" AllowRemove="False" HelpMode="Modeless" AllowEdit="True" ValueFieldGuid="fa564e0f-0c70-4ab9-b863-0177e6ddd247" IsIncluded="True" Description="Filter the contents of web parts by using a list of values from a Office SharePoint Server list." FrameState="Normal" Dir="Default" AllowZoneChange="True" AllowMinimize="False" DefaultValue="fnum" Title="Facilities List Filter" PartOrder="2" ViewGuid="2da5d8db-6b55-4403-80a8-111e42049f8b" FrameType="None" CatalogIconImageUrl="/_layouts/images/wp_Filter.gif" FilterName="Facilities List Filter" HelpLink="" PartImageSmall="/_layouts/images/wp_Filter.gif" AllowConnect="True" DescriptionFieldGuid="2d97730a-cd0d-4cb9-8b55-424951201081" ConnectionID="00000000-0000-0000-0000-000000000000" ExportControlledProperties="True" TitleIconImageUrl="/_layouts/images/wp_Filter.gif" ChromeType="None" SuppressWebPartChrome="False" IsVisible="True" ListUrl="/Lists/FacilitiesList" AllowMultipleSelections="False" ZoneID="Header" __MarkupType="vsattributemarkup" __WebPartId="{768E2035-0461-4A09-8DDD-CA7020C2B23D}" WebPart="true" Height="" Width="615px"></WpNs0:SpListFilterWebPart>
Alla Sanders -
Addition of field in personal setting-default value-po item
Hi,
can any one tell me how to incorporate following senario while executing me21n tcode
I want to add a new field Shipping Instructions EKPO-EVERS in the personal setting Default Value PO Item.
please tell me the steps to do so
thanksHi
please refer to this
<b>New tabs in the header tab-sheet of ME21N/ME22N/ME23N -
Set Default Value of Multi-select list item
I have a multi-select list item I want to default the value of to '%' (which is really '%null%') and have it selected. I tried setting default value of item, but it doesn't take '%null%'. I also tried a computation with a static of
:P507_ITEM := '%null%'; How do you get the default value set and selected?Hi
Shijesh is right, you need to change your null return value and use that return value as your default. Try and use something of the same datatype as your real return values if you plan to use '%' to display all as it will make your queries simpler. eg.
Company A returns 1
Company B return 2
% returns 0
Then your query would be...
SELECT ...
FROM ...
WHERE company_id = DECODE(:P_COMPANY,1,1,2,2,0,company_id)
Hope this makes sense.
Cheers
Ben -
How to Set default value for taxonomywebtagging control with terms and nested terms
Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support -
How to set default values for boolean columns
I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
SergioIn the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null? -
How to set default value to input field
Hi Experts,
I need to set default value to one input field for the transaction crmd_order as a screen variant. Guide me in doing that.
Regards,
HarishUsing the transaction SHD0, you can define the screen variant. While defining the sceen variant, you are allowed to define the default values.
Using screen variant, for the main transactoin, you can also define the transaction variant and you can use this as an independent transaction. -
Any opinions on setting default values on Business Partner level?
Hi All,
I do not have a question, but would like to have a good discussion on how you should preferably be setting default values on a business partner and it's assignment blocks.
In my opinion you have two main alternatives:
1. The "old fashioned" way by using the get_<attribute_name> method and doing some checks for the perticular attribute in the context node.
2. Using the Badi BADI_CRM_BP_UIU_DEFAULTS to fill fields with a default value. With some enhancements on the assignment blocks (making typed_context attribute public and, when not called yet, calling the badi) you can use the badi for all assignment blocks.
Because I discovered via debugging that in the, by many forums suggested, badi code a programm error/exception is used so that the default values are only set during creation mode, I started doubting to use the badi. Because once I had set my data declarations to the right references and the exception did not occur anymore, suddenly it always fills the values even when there are already values filled. So additional checks are needed to assure that I am in creation mode.
Although I like the use of the badi, because all my default values on the whole business partner object can be found in the same place, it is getting a bit strange to: first still enhance the view and context node class, adjust the visibility of the typed_context, call the badi and do all kind of checks to assure that you are in the right view/context node, where this all is faster and more lean and mean when done directly in the get_<attribute_name> method on a context node.
Anyone who wants to give there opinion on this?
Regards,
Martijn.Cameron,
Unfortunately you cannot pass the Account and Contact name before saving the record. Post default tries to capture the name just before the record gets saved, but as the record is yet to be created, the relationship wont exist and only the respective id fields will have values. If you try using account id/ contact id it will work else just pass the time stamp in the name field which will make sure there is some value when the record is saved. later in the back end you might need WS to update the field values. -
Setting Default values in portal form
I have a portal Master/Detail Form. I want to set some of the detail block columns value to the value of a field in the master block.
In the formattng option of the detail column, I tried setting default value to:
p_session.get_value_as_varchar2(p_block_name=>'MASTER_BLOCK', p_attribute_name=>'A_CLASS_CD');
and default value type to: function (I also tried expression). It compiles, but gives me an error when I ry running form. How can you set the default value (from the value of a differnt field)?HI,
You can set the default value to value of a different field. The only way is to use javascript like onFocus.
Thanks,
Sharmila -
Setting default values for field on screen.
Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*& Module STATUS_5000 OUTPUT
text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE. " STATUS_5000 OUTPUT
*& Module PBO_OUT OUTPUT
text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE. " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.Works Now...
-
How to hide PNP selection windows and set default values for PNP.
Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram -
How to set default value and bg color of cross tab cell?
Hi all
Which way can I set default value and background color for a crosstab cell where there are no any data?
I try to pass it in following way
if isnull(CurrentFieldValue) then
But is has no effect.Hi,
If your field is numeric
if currentfieldvalue =0 then cryellow else crnocolor
if the field is numeric but you don't see the 0 check check if : Suppress if zero is ticked in the Number format tab.
Regards -
Extending flash: how do I set default values for filenames
Hi,
I am trying to set default values for filenames
<choosefile> and <popupslider>s that will show up when
my XMLpanel first loads in my jsfl extension file. It seems that I
can only set default values for textbox items.
How do I do this for filenames and popups?
As a workaround, I also tried using a flash object dialog box
to look like a <choosefile>, or any jsfl command, but then
how do I return those values back to the XMLpanel that calls them.
and pass the data back to my jsfl script.
lemme know if you know a way,Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha -
How to set default value in ME21N
Hi all,
I want to set default value of PO item's price unit to 1000 and make it unchangeable, is it possible? If so, could you please tell me how to do that.
Thanks in advance!
WoodyDear Woody,
1) if u want to make any field un-editable then make it Via SHD0
2) Plz find the below link for Demo SHD0, here we need to make the field as out put only
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
Plz Provide the link to ur Abaper
Regards
kumar -
How to set default values in matrix combo
hai everybody.
i want to set default values in a matrix combo box. how to do that
pls.......Hi Priya,
Public Sub comboload1()
Try
ds = oform.DataSources.DBDataSources.Add("OUSR")
oitem = oform.Items.Item("pm7")
omatrix = oitem.Specific
ocolumns = omatrix.Columns
ocolumn = ocolumns.Item("V_2")
ocombo = ocolumn.Cells.Item(r).Specific (r = row number)
LoadEroToCombo1(ocombo)
Catch ex As Exception
oapp.MessageBox(ex.Message)
End Try
End Sub
load to combo function is below
Public Sub LoadEroToCombo1(ByRef ocombo As SAPbouiCOM.ComboBox)
Dim rset As SAPbobsCOM.Recordset
Dim querystring As String
Dim rcount As Long
Dim rindex As Long
Try
rset = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
querystring = "SELECT T0.U_NAME FROM OUSR T0"
rset.DoQuery(querystring)
rcount = rset.RecordCount
rset.MoveFirst()
ocombo.ValidValues.Add("0", "Select")
For rindex = 0 To rcount - 1
ocombo.ValidValues.Add(rset.Fields.Item(0).Value, rindex)
rset.MoveNext()
Next rindex
ocombo.Select("0")
rset = Nothing
System.GC.Collect()
Catch ex As Exception
oapp.MessageBox(ex.Message)
End Try
End Sub
try this code if it helps please reward points
Regards
Cool Ice
Edited by: Cool Ice on Jul 28, 2008 1:43 PM
Maybe you are looking for
-
HT1451 How do I consolidate multiple episodes into a single folder?
I have several episodes of a TV show that I've ripped and imported into iTunes. Unfortunately they all show up as an individual "movie" title. Is there a way to arrange or reorganize the iTunes folders so that they can be easier to view when I sync t
-
Searching multipul fields in a database
hi there, im working on a scouting website, and i have a database that has details of camps all over the northeast. all this data is housed on one table. each row houses the info for one camp, and each column represents an attribute. there are about
-
Corrupt Wedding Footage- Any Chance of Salvation?
I know this sounds horrible, but recently I accidentally deleted a wedding video I shot for a couple from my trashcan. I managed to recover the footage however it's pretty much all static and weird colors, like something out of a horror movie. It's c
-
Backend invoice replicated to SRM for approval
Hello all, classic scenario, R/3 4.7, SRM 4.0 would like to check if it is possible to enter invoice in the backend, replicate it to SRM where should be checked and approved and than sent to payment via backend? Main problem is that all company invoi
-
Want to sell my Mac ...
I want to sell my Mac air 2012 to a friend, but want to erase my credentials..I have no important files on this Mac but would like to give him with a clean install. I re installed mountain lion like someone suggested however it's still asking for my