Set different volumes?

I want to set different volumes for ringer, media, message , alarms etc as I did with my HTC Desire. How can I do it on the Iphone 5?
I have my ringer set to max, but at 2am when I get an email, I get blown out of bed with the notification. Surely Apple does't have a one volume fits all policy, I must be missing a setting somewhere. Please help

Tom - thank you. So to make sure I am clear though, (my audio was always dual mono, and in the inspector they are represented as two seperate tracks where I have the option to check or uncheck each one), but the timeline, they appear as a single track and in your solution (which worked) you are saying to break apart (as in make them seperate from each other and able to fall out of sync? that kind of break apart?) it still worked I was able to see two tracks, similar to FCP7 - and I can adjust volume seperately on each channel, but are they no longer linked in terms of sync? If I am understanding correctly, then is that to say there is no way to keep their connection to the video they belong to and also still see each channel and adjust each channel independently of the other?

Similar Messages

Is there a way to set different volumes for Alerts, phone ringing

I would like to be able to set different volumes for Alerts, Phone ringing, and incomming mail. Is this possible?

No, not at this time. The alerts and phone ringing are all the same. You can provide feedback to Apple if you would like to let them know you would like to see this feature implemented by going to http://www.apple.com/feedback/iphone.html

How do you set different volumes on dual mono?

I'm missing something, I'm sure, right? I normally record a mic to a channel and NAT sound to another channel - so say for example, I might mic up a presenter on stage, and take that feed into Channel 1 (external source) and leave my on-cam mic set to internal for Channel 2 - so I can bring that up in the edit for either Q&A from the audience or just to swell applause. In FCP7 audio tracks showed dual mono as two tracks with individual overlays so you could adjust each channel as needed. In X I only see a single track of dual audio, and in the information box, I can check or uncheck the channel I want - and a lot of times, that's good enough, but how do you keep both channels and adjust the volume of each one seperately?

Tom - thank you. So to make sure I am clear though, (my audio was always dual mono, and in the inspector they are represented as two seperate tracks where I have the option to check or uncheck each one), but the timeline, they appear as a single track and in your solution (which worked) you are saying to break apart (as in make them seperate from each other and able to fall out of sync? that kind of break apart?) it still worked I was able to see two tracks, similar to FCP7 - and I can adjust volume seperately on each channel, but are they no longer linked in terms of sync? If I am understanding correctly, then is that to say there is no way to keep their connection to the video they belong to and also still see each channel and adjust each channel independently of the other?

For the ipod on my phone, each song has a different volume. How do you set it so all the songs have the same volume?

For the ipod on my phone, each song has a different volume. How do you set it so all the songs have the same volume?

Copy everything from your old computer, or your backup copy of your old computer, to your new one.

ServiceData directory on a different volume

Hi,
From what I understand, MacOS 10.6 server can store data from services such as mail and web pages on a different volume by default. I recently bought a MacMini Server and my friend said that the server setup assistant should have prompted me to chose a location for the data files but I didn't configure any services to start up.
Now, I'd like to point the services I want to configure to this "ServiceData" directory on the 2nd hard drive in the Macmini. How do you do that? I Googled around a bit and didn't come up with much and I don't see anything obvious in the Server Admin tools.
Thanks,
Andy

In Server Admin you can specify where the directories of various items are located.
Note: you will need to create the directories and set the correct owner, group and permissions prior to pointing the service at the directory.
If you do not, you may get errors in the logs and the service may not start.
Also, some items are best left where the OS puts them by default such as the open directory database.

Setting audio volume

Hi,
I can't figure out how to set the volume level of the audio I have dragged into the opening screens. The volume is always way too loud when I put the DVD in. I want to be able to match the volume of the content to what is in the main pages and chapter screens.
Thanks,
Lori

You will need to change volumes in Soundtrack or other editor, DVD SP does not handle those changes...also if you encoded differently there can be volume shifts but it sounds like more than that...

Is it too much to ask from apple, an option for different volumes levels from different apps, including alarm, text, email, basically from every posible app?

Is it too much to ask from apple, an option for different volumes levels from different apps, including alarm, text, email, basically from every posible app?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Setting/Controlling volume levels

I'd like to know what you guys do for volume levels.
I have the system volume, iTunes volume, and my Bose volume knob.
Basically, rather than worry about three volumes, I set my system volume and my iTunes volume to max, then just controll the overall volume with my Bose volume pod. This seems to work great.
I don't want to spend my day worrying about 3 different volume levels:)
Bryan

That sounds like a good idea. No pun intended. I don't like to set my sound set up to max, because I think it does not give you the best sound. Whenever I use source sound without amp to max (like a walkman), I notice that receiver or a sound device has noise or static to it. I like to set the source to medium and play with receiver or speakers for adjusting volume.

Final Cut x exporting different volumes

I have multiple nested clips in a single project. For some reason, when I export them individually through compressor (I'm using the same setting for each) They export at different volume levels. They sound and look the same in Final Cut so I have to check every single one once they've been exported and it's a nightmare. Anyone have any ideas? I'm using FCPX 10.1.1 and the latest version of compressor on Mavericks.

No ideas, but export one of the problem clips as a master file. Bring it into Compresssor and after processing, check the audio. Is it also a problem with that workflow?
Russ

Songs play back in different volume levels

Some of my songs play back in different volume levels. How does one make the songs play back in the same volume. I know there's some setting you enable in itunes, but it's always enabled on my system. So why doesn't it work?

I know there's some setting you enable in itunes,
Do you know what this "some setting" is?
In iTunes, go to menu Edit -> Prefs - Playback.
Tick Soundcheck.
On the iPod, go to Setting Soundcheck and set to On.
Resync the iPod.
Note that Soundcheck is not foolproof and there may be some variances on the levels between songs.
You can use this application -> MP3Gain
to better analyze and adjust the levels of your songs.

Setting different pages widths in different sections - Pages 5.2

In Pages 5.2, how does one set different page widths (margins) in different sections?

You can't. Margins apply to the entire document.
What you can do is set the margins to their max width and then use left and right indents for the sections you want narrower.
Peter

I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported. Please choose a different volume for installation." I am f

I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported. Please choose a different volume for installation." I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
What I don't understand is this: I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine. Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop. 1) Why did it work before and it's not working now? 2) Is there anything I can do that does not involve reformatting the hard drive?

It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium

Iphone 3gs- wont allow me to set a volume limit

my iphone laggs when i want to set a volume limit, consequently it doesnt set it
Message was edited by: Halo Beas7

Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha

Set different volumes?

Similar Messages

Maybe you are looking for