Set DISPLAY environment variable -- in DBCA not working at AIX OS
Hi,
I want to create new database in AIX OS and database is oracle 10g:-
When i say DBCA it is giving below error, what should i do?
$ dbca
DISPLAY not set.
Set DISPLAY environment variable, then re-run.
Please help...
Pravin wrote:
How to set the DISPLAY environment variable in AIX?Usual format is:
+<host>:<display-number>+
E.g.
export DISPLAY=192.168.0.235:1
Where the host is the hostname or IP address of the client platform running a X-Server. If the X-Server is running locally, then this entry can be omitted.
The display-number is the display number of the X-Server to use. A single X-Server can have multiple displays. E.g. Unix server running a X-Server can have 10 users connected via X-Terminals and will this have 10 displays.
Judging from X-Windows questions asked on OTN, it seems to be a tad complex to grasp for some - especially those from a MS Windows background as X-Windows is very different and also reverses the client-server concept, requiring the X-Server component to be running on the client platform (where the server platform runs the program that is the X-client).
So it is a lot easier to rather use something like VNC instead - supported on most Unix platforms, Linux, Windows and Apple's OS/X.
Simply run the VNC server on the server platform to create a virtual container for running the X-server display. Connect from a client using a VNC client.
As it uses the RFB (Remote Frame Buffer) protocol, it is a lot faster than running the slower and larger X11 protocol required for X-Windows connectivity over TCP/IP.
Similar Messages
-
Bash: xhost: command not found AND set DISPLAY environment varibale
Hi all, i have this issue, when i try to execute
-> xhost +amjad.iqbal.com
bash: xhost: command not found
-> DISPLAY = amjad.iqbal.com:0.0
-> export DISPLAY
after which if i start installation of oracle database 11g, it says display variable has not been set.
PLEASE HELP!Hi,
when i try to execute "service vncserver status" o/p: unrecognised service
when i execute "ps -ef|grep vnc" o/p: root 1981 1700 1 11:30 tty1 00:00:00 grep vnc
and when i downloaded VNC and tried to install, it says "failed dependencies: libstdc++-libc6.2-2.so.3 is needed by vnc-4.1.3-1.i386"
to install i used command -- "rpm -ivh vnc-4_1_3-x86_linux.rpm"
because of which im not able to complete your steps and im not able to set display environment variable and my installation is not getting started.
Please advice -
BKI0008E: The environment variable BI_CALLER is not set correctely. The cur
Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
Found keyword 'TIMEOUT_FAILURE' with value '1800'.
Finished reading of the Backint for MaxDB configuration file.
Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
Using '1800' seconds as timeout for Backint for MaxDB in the case of success
Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
Setting environment variable 'BI_REQUEST' to value 'NEW'.
Setting environment variable 'BI_BACKUP' to value 'FULL'.
Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
Asking for state of database.
2009-10-22 02:06:09 Database is still preparing the backup.
Waiting 1 second ... Done.
Asking for state of database.
2009-10-22 02:06:10 Database is still preparing the backup.
Waiting 2 seconds ... Done.
Asking for state of database.
2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
2009-10-22 02:06:12 The backup tool is running.
2009-10-22 02:06:12 The database is working on the request.
2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
2009-10-22 02:06:17 The database is working on the request.
2009-10-22 02:06:27 The database is working on the request.
2009-10-22 02:06:42 The database is working on the request.
2009-10-22 02:07:02 The database is working on the request.
2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
2009-10-22 02:07:17 The database has finished work on the request.
Receiving a reply from the database kernel.
Got the following reply from db-kernel:
SQL-Code :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
Have encountered error -24920:
The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Constructed the following reply:
ERR
-24920,ERR_BACKUPOP: backup operation was unsuccessful
The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
Removing data transfer pipes.
Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
Removed data transfer pipes successfully.
Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
Data Protection for mySAP(R)
Interface between BR*Tools and Tivoli Storage Manager
- Version 5, Release 4, Modification 0.0 for Linux x86_64
Build: 303 compiled on Nov 16 2006
(c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
usage:
backint -p <par_file> [-u <user_id>] [-f <function>]
[-t <type>] [-i <in_file>] [-o <out_file>] [-c]
where:
<user_id> backint utility user
<function> backup | restore | inquire | password | delete
<type> file | file_online
<par_file> parameter file for backup utility
<in_file> name of a text file that defines the objects
default: STDIN
<out_file> Pool for processing messages and the results
of the executed function.
default: STOUT
BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
BKI0021I: Elapsed time: 01 sec .
BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.Also, is there any specification about the user permissions and about how the backup should be run?
-
DISPLAY ENVIRONMENT VARIABLE SETTING
Hi All,
After setting the Display Environment variable and running netca
I am getting below error:
Oracle Net Services Configuration:
java.lang.NullPointerException
at oracle.ewt.lwAWT.BufferedApplet.<init>(Unknown Source)
at oracle.net.ca.NetCA.<init>(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
Can anyone tell me what i will doAnd TEST-SERVER is the name of your local PC?
the DISPLAY variable needs to be set to the IP of a X-Windows server, the database server will be client to this server!
I know many people here don't know anything about Oracle nor Unix, and also don't want to learn it, and at the same time are SHOUTING all the time.
This is getting terribly annoying.
Sybrand Bakker
Senior Oracle DBA -
Why do we actuallya need the setting of environment variables?
Hello guys,
I read that, in order to connect to the database via SQL*Plus, we need to have the environment variables set. So, SQL*Plus is a command tool, which doesnt know over which path to connect to db, if the environment variables are not set?
How about the needs of setting environment variables at point of view of MS-DOS? I know that over MS-DOS we can check if the environment variables are already set or not. Or we can actively set the environment variables.
When should we actually set the environment variables? Before we run the GUI or after? I read, that if we set it before we run the GUI, then the setting will be taken over when it comes to that step by running GUI. I am curious, since this would be interesting to know, if we use other version than XE.
Thanks..Oracle's flexibility ... many different versions working the same on many different versions of many different operating systems ... means that a single consistent installation and configuration methodology must work everywhere so as not to have the limitations of other competing products that work on only a single operating system or require that one learn a different syntax and methods for different versions.
Be grateful Oracle is as it is. Your competence in one version and operating system translates into competence in others. -
Setting DISPLAY enviroment variable
Hi,
I want to run oracle wallet manager from my windows client. My application server is installed on the SUSE Linux Enterprise Server 9. I have given the following command to set the DISPLAY variable.
export DISPLAY=192.168.100.159:0.
Here is the output of the same. It gives some java exception error.
Can anyone help me in setting the variable so that I can open wallet manager.
Regards
Trusha
oracle@orclasg:~/OraBi/bin> export ORACLE_HOME=/opt/oracle/OraBi/
oracle@orclasg:~/OraBi/bin> ./owm
****DISPLAY environment variable not set!
Oracel Wallet Manager is a GUI tool which
requires that DISPLAY specify a location
where GUI tools can display.
Set and export DISPLAY, then re-run.
oracle@orclasg:~/OraBi/bin> export DISPLAY=192.168.100.159:0
oracle@orclasg:~/OraBi/bin> ./owm
Exiting
java.lang.NullPointerException
at oracle.ewt.lwAWT.BufferedApplet.<init>(Unknown Source)
at oracle.sysman.emSDK.client.appContainer.WebApplication.<init>(Unknown
Source)
at oracle.security.admin.wltmgr.owma.OwmaApp.<init>(OwmaApp.java:109)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at oracle.sysman.emSDK.client.appContainer.WebApplication.main(Unknown S
ource)
Done.
oracle@orclasg:~/OraBi/bin> export DISPLAY=192.168.100.159:0
oracle@orclasg:~/OraBi/bin> ./owm
Exiting
java.lang.NullPointerException
at oracle.ewt.lwAWT.BufferedApplet.<init>(Unknown Source)
at oracle.sysman.emSDK.client.appContainer.WebApplication.<init>(Unknown
Source)
at oracle.security.admin.wltmgr.owma.OwmaApp.<init>(OwmaApp.java:109)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at oracle.sysman.emSDK.client.appContainer.WebApplication.main(Unknown S
ource)
Done.And what did you configure at the side of 192.168.100.159 which is supposed to be your client?
I suggest you run VNC server on the server side ('vncserver') and set $DISPLAY to that. Next, use VNC viewer on your client machine to connect to the VNC server.
Unless you have an X server running on your client machine of course. -
Setting new environment variable on Linux
{noformat}I need to set new environment variable on my linux machine from inside my code. I am using csh and the command works fine from command line:
setenv IFConfigLocation4 /home/username/myfile.xml
But when i try the same thing from Java code it does not seem to have any effect. here is my code:
import java.util.*;
import java.io.*;
public class CDE_parser_methods{
public static String fileParse(String inFile, String parserName, String outFile, String CMConfig_locale)
String parsed = "SUCCESSFUL";
System.out.println("Parsing file..." + "\nParser name: " + parserName +"\nInput file name: " + inFile + "\nOutput file name: " + outFile + "\nCMConfig file is: " + CMConfig_locale);
System.out.println("Current Java version: " + System.getProperty("java.version"));
try
String cmd[]={"/bin/csh", "-c", "setenv IFConfigLocation4 " + CMConfig_locale};
Process proc = Runtime.getRuntime().exec(cmd);
int exitVal= proc.waitFor();
System.out.println("Value of setenv command is: " + exitVal);
String cmd2[]={"/bin/csh", "-c", "env"};
Process proc2 = Runtime.getRuntime().exec(cmd2);
InputStream instr = proc2.getInputStream();
InputStreamReader inread = new InputStreamReader(instr);
BufferedReader buf = new BufferedReader(inread);
String line=null;
while((line=buf.readLine()) != null)
System.out.println(line);
int exitVal2= proc2.waitFor();
}catch(CMException cme){
System.out.println("Issue when trying to executing parse command, details: " + cme.getMessage());
System.out.println("Description of the issue is: " + cme.getDescription());
parsed = "FAILURE: " + cme.getDescription();
}catch(Exception e){
System.out.println("Uncought exception, details: " + e.getMessage());
parsed = "FAILURE: " + e.getMessage();
return parsed;
public static void main(String[] args) {
String results=CDE_parser_methods.fileParse("/opt/itemfield/ServiceDB/Project2/Mapping_for_Account_Number_Structure_ITS_Input_File.xls","MappingforAccountNumberStructure","/opt/itemfield/ServiceDB/Project2/test_ws_44.xml","/home/rvenishe/CMConfig.xml");
System.out.println("Result of fileParse call is: " + results);
}The out put of my env command does NOT contain system variable "IFConfigLocation4". Any ideas? {noformat}Environment variables and their values set from within a user process has their scope and lifetime limited to the process and its subprocesses. See java.lang.ProcessBuilder class and its API documentation for setting env for a subprocess that will be started by a ProcessBuilder instance. Even in the C programming we have the same limitation for the environment.
Since they are not globally set, system command like env or Java method like System.getenv() can't see them. -
Hi,
I am getting following error message when trying to invoke owm(Oracle Wallet Manager from $ORACLE_HOME/bin)
****DISPLAY environment variable not set!
Oracel Wallet Manager is a GUI tool which
requires that DISPLAY specify a location
where GUI tools can display.
Set and export DISPLAY, then re-run.
I executed ./owm from my local machine by taking console of server.
please guide me.
Thank you
Edited by: user10923114 on Mar 15, 2011 12:29 AMHi;
What is your OS version? There could be many reason to you hit
Starting VNC server: no displays configured [ OK ]Please see: http://www.google.com.tr/#hl=tr&source=hp&biw=1276&bih=793&q=VNC+server:+no+displays+configured+&aq=f&aqi=&aql=&oq=&fp=dfbbacf76c02529a
Regard
Helios -
I want to set Jdeveloper environment variables
First,thanks for your answer.But I mean to set Jdevelop
environment variables.If I can't set right Jdeveloper
enironment,program can't pass the compile.Because "import
oracle.html.*" can't be found by Jdeveloper.
nullHi
You would need to include jweb.jar file as a library in your
project properties.
jweb.jar comes with Oracle Application Server. Copy the jar file
to lib directory in JDeveloper and add it as a library to the
project.
This would make import oracle.html.* work.
regards
raghu
Micheal Chang (guest) wrote:
: First,thanks for your answer.But I mean to set Jdevelop
: environment variables.If I can't set right Jdeveloper
: enironment,program can't pass the compile.Because "import
: oracle.html.*" can't be found by Jdeveloper.
null -
How to set the Environment Variable
I'm going through a tutorial on how to create an application and run from the command prompt. I have finished installing my jdk 6 Upadate 5 but i don't know how to set the Environment Variable for the javac compiler and the java interpreter to find my program.
I have created an application called "ExampleProgram" and have saved it on drive C:. How do i set the Environment Variable so that the "javac" compiler and the "java" interpreter can find itgyesa_say wrote:
I'm using Windows XP Service Pack 2.A very bad choice to go with Windows. Personally I prefer Linux.
I Google and had several information on how set it, but i tried all of them and none seem to work.I typed "how to set environmental variable in winxp" in Google and the very first link provided all the information I needed (you need). These things will make much more sense if you go through it yourself rather than having someone else spoon-fed you the answer. -
Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
im not sure what to do next - can anyone help?
im running OSX 10.7.4Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks. -
Touch Panel Shared variable binding does not work.
Hi,
Is there any reason why shared variable binding is not working under Touch Panel Target?
Is there any plan for implementing or there is some trick I should know?
AndrasRebeccaFo wrote:
Hello Andras,
which version of LabVIEW are you using? As yu can see in:
http://digital.ni.com/public.nsf/websearch/04AAA6903A9456F08625715A0026BC57?OpenDocument
it should work. So what for problems do you have?
Thanks,
Just FYI, the KnowledgeBase article linked above has been revised and moved to a new location. See the new KnowledgeBase 58JFBGD2: Are Shared Variables Available For LabVIEW Mobile Module (Formerly PDA Modul... -
Bind variable peeking does not work
Oracle 9.2.0.8
create table my_table (c number);
create index i on my_table(c);
declare
par varchar2(10);
begin
par:='qqq';
for rec in (select * from my_table t where c = par or par is null )loop null; end loop;
--USES FULL TABLE SCAN, works SLOW!!!
--but the same query with constat insted of bind variable :
for rec in (select * from my_table t where c = par or 'qqq' is null )loop null; end loop;
--USES INDEX i ON column c , works FAST!!!
--WHY bind variable peeking does not work ???
end;
Thank you for replysqlplus:
drop table my_table;
create table my_table as select object_name as c from all_objects where rownum<=1000;
insert into my_table select * from my_table;
insert into my_table select * from my_table;
insert into my_table select * from my_table;
insert into my_table select * from my_table;
insert into my_table select * from my_table;
insert into my_table select * from my_table;
commit;
select count(1) from my_table;
COUNT(1)
64000
create index my_table_idx on my_table(c);
exec dbms_stats.gather_table_stats('bogdanov','my_table',cascade=>true)
variable par varchar2(10)
exec :par := 'www'
--FIRST CASE
explain plan for select * from my_table where c=:par or 'www'='qqq';
@?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 64 | 1792 | 3 |
|* 1 | INDEX RANGE SCAN | MY_TABLE_IDX | 64 | 1792 | 3 |
Predicate Information (identified by operation id):
1 access("MY_TABLE"."C"=:Z)
--SECOND CASE
explain plan for select * from my_table where c=:par or :par='qqq';
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 703 | 19684 | 95 |
|* 1 | TABLE ACCESS FULL | MY_TABLE | 703 | 19684 | 95 |
Predicate Information (identified by operation id):
1 filter("MY_TABLE"."C"=:Z OR :Z='qqq')
--THIRD CASE very strange.... COMPARE IT WITH FIRST CASE: 123456789 vs. 'qqq'
explain plan for select * from my_table where c=:par or 'www'=123456789;
@?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 703 | 19684 | 95 |
|* 1 | TABLE ACCESS FULL | MY_TABLE | 703 | 19684 | 95 |
Predicate Information (identified by operation id):
1 filter("MY_TABLE"."C"=:Z OR TO_NUMBER(:Z)=123456789)
Edited by: user450084 on Dec 9, 2008 5:17 AM
Edited by: user450084 on Dec 9, 2008 5:27 AM -
Setting Oracle environment variable using batch (.bat) file in windows
Hi,
Oracle 9i db
Windows OS
I am in process to create the database (Considered that Oracle9i software is already installed) by running one batch file which consist of all the scripts for the database creation.
But i also want to set the environment variables at MyComputer(right click)>properties>advance>environment, permenently by running the batch (.bat) file
ORACLE_HOME
ORACLE_BASE
ORACLE_SID
So, how can it be done ?
With RegardsHi,
*@echo off*
set ORACLE_SID=iprsdb
set ORACLE_BASE=C:\oracle
set ORACLE_HOME=C:\oracle\ora92
call C:\install_bkp\test_env_var.bat
echo Test Successfull.
Above mentioned is the code written in the batch (.bat) file
In that i have also called another .bat file which test the env. variable values which is as below:
c:\>test_env.bat
===================
Testing oracle sid
===================
iprsdb
=====================
Testing oracle base
===================
C:\oracle
=====================
Testing oracle home
=====================
C:\oracle\ora92
Test Successfull.
But when i checked at MyComputer(right click)>properties>advance>environment variables
there, I saw none of the entries from the above, why so ?
how to set env. variables permanently using the DOS commands. ?
With Regards -
when i am going to Install 11gR2 then thsi error shows how to solve it plz give me guidance
This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Expected Value: 1023
Actual Value: 0HELLO iSHAN SHAH
JUST EXPLAIN US YOUR PROBLEM IN DEPTH.
TELL US YOUR HARDWARE AND SOFTWARE CONFIGURATION.
ALSO TELL US IN WHICH STEP OF INSTALLATION , THIS ERROR RAISED.
THANKS
HARSH SHAH
Maybe you are looking for
-
This is the last error summary I received: Process: com.apple.WebKit.WebContent [965] Path: /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com. apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit
-
IDoc to Create Shipment Document in SAP
Hi, I want to create the shipment document in SAP via EDI message from freight forwarder and subsequently update the shipment document(VT02N) statuses via EDI like planned/loaded/shipment end etc.... I am reasearching on the Idoc type for that...I f
-
Hi I have a problem with my database startup, I want to recreate a database on a IBM J50 server with OS AIX 4, and this is my problem: SVRMGRL> connect internal Connected to an idle instance. SVRMGRL> startup nomount LCC-00211: unexpected delimiter [
-
Had kernel panic and started in safe mode. Checked memory- showing17.8 GB. Now can't log on even in safe mode. Screen goes pink and blue and distorts
-
Ipod Mini that shut down Windows XP Home
Let me describe what I just went through. My daughter's 4 GB mini was wiped I think anyway she has asked me to set it up on the "family" computer. I updated iTunes and then proceeded to update the software on her mini. When it asked to restart my com