Set document to be seen one page at a time but print four to a page?

I would like to create a pdf (from a PowerPoint presentation) so that when it is viewed on the web it is seen one page at a time but when it is printed it prints four to a page. It is possible to put that in pdf document settings or do I have to rely on users to make the four to a page choice themselves when they print?

File > Properties > Initial View
You can set the initial view
From the Advanced tab in the Properties you can set some Printing Defaults, but in AA9 Pro, I do not see Tiling as an option. (I believe the powers that be at Adobe thought it best to re-name this feature Banner in AA10. Perhaps it's Poster, I've only seen screen shots of AA10 Print dialog. They've sucessfully dumbed it all down in keeping with Microsoft's current philosophies. Increase font size should soon enough be replaced with "Grow Font")

Similar Messages

  • My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

    my hp 100 mobile printer will only print one page then quits. will not print all of the pages.  i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

    Hello colt1,
    Are you using Bluetooth or USB cable to connect to the printer?  Did you install from the disc, or from the online program?  When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.? 
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • The computer that I had my iphone apps synced to has died and I don't know how to get access to my apps on the new computer. I'm using a Windows pc. I understand that I can only have my apps synced to one computer at a time, but the former pc is dead.

    My HP Touchsmart died the other day. My husband works on computers as a hobby and was able to get me up and running on a Dell laptop in no time. I have an iPhone 4s and had all my apps on itunes on my HP. I understand that you can only have your iPhone apps synced to one computer at a time, but what do you do when the computer containing all your info is in unusable condition? I have tried deauthorizing all the computers associated with my account, that did not work. I had this problem once before and finally ( after much blood sweat and tears ) was able to deauthorize the old computer, but it was in working order. Two of the computers that are listed under the iTunes Wi-Fi Sync setting are no longer in use, the HP had my apps synced to it and the other had everything else except my photos, which are on a third computer that is still in use. Please forgive for information overload but am trying to give all the info that I think could be relevant. Your help would be appreciated so much!
    Sincerely,
    PiPI

    Re: That garbage is unreadable.
    If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
    Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
    I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

  • Dear sir/madame,I have tried to use the inbrowser editing capability for Adobe Muse to login to my CMS. To login I have use the exact same FTP details I have used to upload my website, I even checked the page url multiple times but I keep getting the same

    Dear sir/madame,I have tried to use the inbrowser editing capability for Adobe Muse to login to my CMS. To login I have use the exact same FTP details I have used to upload my website, I even checked the page url multiple times but I keep getting the same error (the username and password are invalid for your FTP server. Please check them and try again). The hosting website (Yourhosting.nl) only has this one FTP user, which I cannot expand to more users. Can you please tell me if I am doing something wrong? The url to this page is http://e-divecollege.be/index.html or www.e-divecollege.be

    Dear sir/madame,I have tried to use the inbrowser editing capability for Adobe Muse to login to my CMS. To login I have use the exact same FTP details I have used to upload my website, I even checked the page url multiple times but I keep getting the same error (the username and password are invalid for your FTP server. Please check them and try again). The hosting website (Yourhosting.nl) only has this one FTP user, which I cannot expand to more users. Can you please tell me if I am doing something wrong? The url to this page is http://e-divecollege.be/index.html or www.e-divecollege.be

  • My ipod nano was synced by itunes and removed all of my music and game files. I am in the process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

    My ipod nano was synced by itunes and removed all of my music and game files, and replaced my music with my kids music that they have put into the current itunes library. My music is nowhere to be found on my computer, so now  I am in the long, forever process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

    Contact iTunes support and explain your situation to them.  They may let you redownload it at no cost.
    http://www.apple.com/support/itunes/contact.html
    If they don't, I'm afraid you'll have to purchase it again.  Sorry.
    B-rock

  • New owner here.  How can I select specific pages of a document found on line and print just those pages.  What I see is the ability to select only 1 page at a time and print that one selected page only.   Thanks much.

    New owner here.  I see that in printing I can select one page and print same.  How do I select numerous pages from a document and print only those selected pages? I would not think that I can only select one page at a time.  Thanks much

    Just change the range as illustrated below.  If you don't see that, click the Show Details button.

  • Setting Equalizer for more than one song at a time

    Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
    Thanks,
    Joe The Author

    highlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.

  • When printing anything off the internet it shrinks the full page into one forth of the full page. How can i print using the enitre page?

    Every time I use firefox I can't print full pages off the internet. I will find the page I want, for example, map quest. I push the print button and my printer prints the entire page in one forth of the space. The entire page I printed can be found in the upper left hand corner of the full page, just shrunk down to a fourth of its size. How can i get a full page printed from the internet?
    == This happened ==
    Every time Firefox opened

    See this:
    [http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

  • The Back button only allows me to go back one page at a time instead of selecting a previous page from a drop-down list. This is a real problem: anyone have any ideas?

    In the previous version of Firefox, I could go back to a previous webpage by clicking on a part of the Back button which brought up a list of recently visited sites, and by clicking one of these, could jump straight back to that page. This facility does not seem to be available in the latest Firefox, and the Back button only goes back one page at a time. This is really inconvenient, as,
    it now takes longer to get to an earlier page
    there is no visibility of previous pages visited
    any actions carried out on webpages are undone when going back through them - this does not happen when jumping back several pages in one go.
    This is a real problem as I used to the old system constantly, and cannot continue to use Firefox 4.0 unless there is a way around it.

    For me, I have the same question, this is a poorly done upgrade and I want to go back to 3.6

  • Photosmart C4680 has ink but prints only a blank page

    I have just installed this printer on my Mac PPC computer, using OS X 10.4.11. I downlaoded and installed the proper driver and software for it from HP. All is running, and appears as it should -- except nothing prints out, no ink being put on the page, but a blank page.
    The utility says there is ink in the cartridges, although low, in both in color and in black cartridges.
    I get no print even when not hooked to my computer, simply using the Copy function. I get no print when printing from a file. All I get is a blank page. 
    If I scan, it does scan the page fine, and opens it on my monitor -- but if I send that to printer, it prints a blank.
    I have run the cartridge cleaning operation three times now. No difference. I tried the alignment, but find that to do it, it first has to be able to print something! 
    I am using the right driver. All seems to function fine -- except all prints are just a blank. Again, the utility says I do have ink in both cartridges. Yes, it is set up properly in my System Preferences -- all the setup is fine. It seems to be fully accessible and fully functions -- except It just isn't putting out any ink. 
    So, what is wrong here, what do I need  to do?

    Since I posted nearly a year ago, I learned about HP. It seems HP is the worst for rejecting generic ink  cartridges. From what I learned, HP does something in its chip that prevents it from being reset, as chips for other brands can be. As such, generic cartridges have to have the original chip replaced. Because of patent issues, they can't make the chip exactly as HP does. Thus, problems, as planned by HP to force you to buy their exhorbitantly high priced ink cartridges and exercise a monopoly.
    I ended up getting rid of that machine -- and getting an Epson. Epson chips are easily reset, so the orignial chip can be used, and there is no problem with generic cartridges.
    If you want to spluge the price of a HP brank cartridge, your machine should work. After going throhgh several generic cartridges, I found they worked at differing amounts, including not at all, but none printed for more than about a quarter of the cartridge. That is, even if you get a generic that works, it won't work for long.

  • When I'm typing and have to hit the back button to correct the preceding letter, my correction becomes a correction of the whole message. It begins erasing very quickly, one letter at a time but doesn't stop. Help!

    I need help with my back button. It goes crazy and instead of erasing one letter, it very quickly starts erasing the whole message...one letter at a time. But very quickly!

    Try resetting your phone: hold the on/off and home buttons simultaneously until you see the Apple logo (ignoring the off slider that appears first), then release.  If the problem persists, try restoring your phone.

  • 2nd email set up says server unable to verify at this time but 1st email sets up fine??

    Recently changed all email passwords on my pc. Then tried to get mail on my ipad and was asked to type in password. Worked fine on one of my email accounts but 2nd email account will not work. Te process stops when it has to verify the info. Says server unavailable but just worked on 1st account.

    Go into Settings > Mail, Contacts, Calendars on your iPad and select your email accounts. Change the passwords to the new ones. This should solve the problem.
    If it doesn't solve your issue I suggest deleting the email accounts on your iPad and recreating them. Be su you have all the necessary info before deleting an account.

  • How can I set Mail to show only one email at a time

    Mail will group emails based on subject or sender and then I keep losing or missing emails because they get buried in a thread. Sometimes under another persons name!
    I'm old and easily confused.
    I just want one email per line. No grouping. Can't seem to figure out how.
    Thanks!

    Hi Keefer-in-space!
    You may need to try turning off the “Include related messages” setting in the preferences of your Mail program:
    Lion Mail: View conversations
    http://support.apple.com/kb/PH4825
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • My HP1610 all in one prints top of page, unable to read faint printing on majority of page.New cartr

    I have installed a new black cartridge in my 1610 All in One, Previous cartridge was low on ink when it stopped printing the majority of the page. Print test on new cartridge is fine. Top of page and all of line border is fine. From 1 1/2 inch from top printing is too faint to read. Line border prints completely. Bottom of page prints faintly but enough to read. What now?

    Welcome to the HP Community , I read through your post about the printing issues you have been having, and I hope to help you! Seeing how the printer will make copies and test print tells us that the printer itself is fine and there is no hardware issues. However, seeing how printing from two different computers will not work, flags a software problem on the computers. Please try out the steps below and get back to me with the results and we will go from there. If you did not install the Full Driver, run the HP Printer Install Wizard for Windows to search and install the complete driver and software. This will need to run on both computers individually. Manually restart the print spoolers on the computers:1. Click Start
    2. Type "Services" in the search field.
    3. Open SERVICES
    4. At the bottom, click "Extended View"
    5. Search for Print Spooler
    6. Right-click it and choose Properties
    7. Select as Automatic in the drop down box, close the Window
    8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
    9. Close out of Services and try printing from Notepad.10. Try printing from a web browser now, if there is a problem with the print, try a different web browser.  Show thanks for my reply to help you today by hitting the "thumbs up" icon below!I hope to hear from you, good luck! 

  • Printer printing single page as multiple pages and on sometimes only print part of the page

    The problem may not be with the printer it could be with the computer instead and I would think that maybe that is the problem.  The computer is an HP 255 as well, and both units belong to my school so I don't have administrative functions. The computer runs Mircosoft windows 7-professional version 32 bit.  I used to be able to print normally with no problems.  However, recently I tried to print my paystub and it blew it up so wide and long that it only printed a third of the page down and half the page across.  Today I tried to print out some other paperwork and for a single page it was printing as three pages but some pages it printed in their entirety with no problems.  I've tried to run the diagnostic check and it downloads but refuses to let me open it no matter what program I try to use.  I've tried to check the printing perameters but it tells me that it's set at 10 by 11 with no margins and is set to portrait.  If I try it on my Asus desktop, it seems to print things just fine so I'm inclined to believe it is the computer but I have no idea what's wrong or how to fix it.  Thanks.

    BMack,
    Have you thought about having a 2-page document where the second page is a duplicate of the first page?
    Jerry

Maybe you are looking for

  • USB Drives auto-mounting at startup?

    I am new to the Mac, on little issue i have with my wonderful MAC is when i restart\start up the Mac, the USB Drives \ USB jump drives are not automatically mounted like they do in windows. In order for it to be found, i have to unplug and reconnect

  • "Compacting" a FCP project for archival

    I know that there's a function in FCP, where you can re-render media (and add handles, if you like) and thus save disk space, but still being able to edit the project (but only with the re-rendered assets). But I've forgotten what settings to use, to

  • Sing&Certify in Reader 9??

    Hello. Is it possible to sign & certify a form in Reader 9? Because i can't do it.. (i can in Acrobat). I extended features in Reader. Please help. thnx.

  • Variable height for iframe on different domain

    Our company is developing an internal website. we are using extensis portoflio to manage a showcase area and moveable type for a blog area. On the pages where the portfolio content will be pulled in we are using an iframe (this content lives on the s

  • Error deploying process after database migration in SOA11g

    Hi all, I am working on SOA11g and weblogic 10.3 we recently shifted my database server to another ip and reconfigured the ip settings in each of the soa datasource through weblogic console.Initially on starting the server it gave B2b init error but