Set Email as Mandatory field in User Master

Hi There,
Could anyone please tell me what are all the possible options to set Email as mandatory field in user master?
Thanks in advance.
Rajesh.

Hi,
could maybe a transaction variant (create via SHD0) be helpful? You have then however to also create a "variant transaction" (e.g. ZSU01) pointing to it and remove SU01 from your admins to enforce it.
Advantage is, that this is SAP standard and compatible to any future SP implementations.
Regards,
Markus

Similar Messages

No provisioning of User Group for authorization field in user master

We are implementing CUP 5.3 workflows. Both in manual proviosing and automated provisioning based on User Defaults the user group gets only provisioned to the Groups tab in SU01. The field User Group for authorization on the Logon data tab remains empty (field CLASS from system table USLOGOND, filling CLASS field in table USR02).
In User defaults both under user default as on the user group tab the user groups have been defined. In manual provisioning the correct list of user groups get displayed for selection.
Under field mapping in the Application field I only find User Group in user master maintenance, but not User group for authorization. However I would assume I do not need to use field mapping, as I want to automate this provisioning based on user defaults.
Am I missing a configuration setting here? If so, where can I set it?
I would assume the provisioning of this field is possible. RAR reports the user group also based on the User group for auhtorization and not from the Groups tab.

S.Pados,
I can assure you that what I said in my last response does provision the User Group For Authorization Check on the Logon Data tab; in fact, I was having the opposite issue where the Group tab was not being provisioned; however, I am ruunning AE 5.2 and you said you are running 5.3; maybe something did change or got lost in the releases; it probably is good to see what SAP has to say about this; I would hate to lose this capapbility when I upgrade to AE 5.3
As far as using the custom field for multiple applications, would that field not be usable for any of the applications you would select in the request form?; if you are using the same table names in the different SAP systems (selectable by the application field on the request) would the drop down selections be whatever the table has defined for that system? I may not be understanding something here so I am just asking;
It would be great to have a Group field automatically filled in by another selection to avoid the user involvement; I agree with you there; because of our concerns on users entering the AE request, our shop has decided to continue with the users submitting the request through normal email and the security administrators perform the AE entering; this way we have a better idea on something like the GROUP field; we have an option to include the original email as an attachment for justification of the request
Sorry I could not be of more help
Jerry
Ryerson,Inc.

Mandatory fields for vendor master load

Hi Experts,
what are the mandatory fields for the vendor master upload? how can I find that?
Thanks for the help.

In addition, you can also refer the links:
http://www.auditnet.org/docs/SAPR3AccountsPayable.txt
http://users.ev1.net/~gmorris/securitydocs/SAPR3AccountsPayableMatrix.doc
Hope thisll give you idea!!
P.S award the points.!!! !!!
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

MM Manage mandatory field in material master data

Hi,
i need to manage some fields in MM01 and MM02 in order to have these fields mandatory if other fields have particular value. For example, if material type is ZFER and Prod.hierarc (in Basic Data 1) is AL001, only in this case i want that field Comm./imp. code ,in view Foreign Trade import, is mandatory.
I'm looking for an user-exit. I find EXIT_SAPLMGMU_001 but with this solution i have a problem. The mandatory of field is active only during saving, on the contrary i would like that this mandatory will be similar to the standard.
Thanks for help,
Michele Garofalo

Hi,
I would like to make a field mandatory in Master Data.....how can i make a field mandatory field?
please provide me solution for this one
Cheers...

Useful life is asking mandatory field in asset master data

while asset master creation useful life is asking mandatory field in dep.key : ZSLU. actually i have to give "ZERO" in useful life field. i have set screen layout in AO21 also.again asking mandatory field. I got the one point, I think this is the problem,
Note: Base method 0011 (Ordinary: percentage from useful life) already assigned in dep. Key ZSLU. If we assigned in dep. key ZSLU, we should give positive values for useful life in asset master data.
I changed base method 0002 instead of 0011, it was accepted, If i change base method(0011),
i want base method instead of 0011?
which base method i have to give? please give suggestion?
Thanks
indu

Hi ,
i have changed optional field also. it's asking mandatory, i have tested base method 0002 instead of 0011. if i give 0002 or other base method, it is accepting.
Note: if we mention base method 0011, we must give passitive values in useful life.
what i have to do? please tell me?

How to make Location as mandatory field in Asset Master

Hi All,
My client wants Location field to be mandatory in the Asset master. I ddefined it in
Enterprise Structure>Definition>Logistic-general > Define Location.
Also i made this field mandatory in 'Define Screen Layout for Asset Master Data'>Time-dependent data...in configuration.
But when i go to create New Asset and when i select Location which i defined earlier , i am getting this error " Entry -
does not exist in T499S (check entry)
Though i have defined this location in Ent. Struct.
Need your help
Regards,
PM

Hi Pyare
I think note 109602 could be relevant to this problem.
Perhaps you attempt to enter a location without first entering a a
plant. (A location will not be accepted unless you have first
specified the plant.)
Regards
Javier

System demands Weight unit as a mandatory field in material master

Hello friends,
When I create a material with only basic data view, the system doesnot require the weight unit field(in basicdata1 view) as a mandatory field, but when I try to create a material with salesorg1 view , it makes the weight unit filed as a mandatory field and also populates the weight unit field with the value as "KG" by default. Could any one please help me to find out where I can see the configuration and the default values.
Thanks,
Ramineni.

Hi Ramineni,
Plaese go through the menupath to conttol the field selection in the Material Master just like the fields controlled in customer master. Here you can select the required fields as mandatory, suppress or Required. I believe you need to take consideration of Material Type while doing this.
Spro->Logistics General->Material Master->Field Selection.
Consider the transactions : OMSR & OMS9.
Please let me know your thoughts.
Thanks and Regards,
Satheesh Durgi

How to set Batch as mandatory field in Subcontracting PR component input

Hello,SDN members
Happy New Year!
My scenario is about subcontracting purchasing:
1. Move stock to vendor through movement 541
2. Create a purchase requisition includes items with item category "L",
and then input component,that is a quantity of material moved to vendor above
3. Convert PR to PO
4. Process GR according to PO
Beause the batch field is optional in component input screen above step2,the user always forget to input it.
So I want to set Batch field as mandatory in component input screen.
I have not idea about it,Could anyone give suggestion?

this batch number field for the component in the PO is optional for various reasons. the batch that you send to your subcontractor may not even be produced at the time when you create the PO. In this case the user could not enter anything.
The PO is created by buyers, but the component is send to the vendor by the shipping department, the buyer usually does not care about the batch.
The batch field becomes mandatory when you ship the material to the vendor using ME2O, or even in the transaction MB1B
and the batch field is again mandatory when you receive the finished good and have to issue the component.
The batch field in the PO component can only be made mandatory from a good developer in a user exit

Conditional Mandatory Field in Material Master (Sugg. Needed

Hi ,
I am having a requirement where i need to make a particular field to be mandatory for a certain condition in Material Master.
Say for a Product Hierarchy i want to make Volume Rebate Group mandatory ( Sales Org 2 View).
Please suggest the possible solutions for the same.
Thanks,
Rachita.

Hi,
It is possible to get access to all other fields from within a field exit by using the below code. This is a field exit on GMG_HEADER_FIELDS-grant_type within program SAPLBDT_GMGR but by using the code below you can get data stored in any field within the program. i.e. GMG_HEADER_FIELDS-GRANT_NBR
Field-symbols: <status>.
assign ('(SAPLBDT_GMGR)GMG_HEADER_FIELDS-GRANT_NBR') to <status>.
if SY-SUBRC = 0.
message e003(zr) with <status> .
******other code*****************
endif.
Reward points if found helpful....
Cheers,
Rakesh.

Plant field validation and mandatory field in CC master

Can we have a validation of a field e.g. Plant in WBS level and substitution at the same time.
In projects Plant gets substituted during saving project from Cost center master data. At the same time can I maintain a validation that if this field is not updated it would would not allow save project.
Which one Validation or Substition is prioritized first during project saving?

Hi,
I think it is possible to have substitution and validation at the same time. SAP document says " If you have defined a substitution that contradicts a validation condition, the system informs you of this by displaying a message. We can therefore say that validation has priority, or is u201Cstrongeru201D than substitution."
Warm regards,
Srinivas Potluri
Edited by: Potluri Srinivas on Aug 2, 2011 7:07 PM

Check for mandatory fields while creating EP users using code .. :|

Hello All,
I have a code using which I can create user accounts/EP users on Portal, am working on EP6 SP9 & SP12.
My query:
1. From Portal's perspective -> While creating EP users, there are few mandatory fields like user-id, FirstName, LastName, Email-id and Password. If any of the above fields is null/empty, Portal would give us an error message.
2. From coding perspective -> Here, only the user-id is required. Even if I do not enter/fill any of the above mentioned mandatory fields (except user-id), user account is created.
In case wherein FirstName/LastName is not mentioned, Portal shows the userid in the Welcome Frame, i.e. Welcome <user-id>. Tried this by commenting the statements contains the methods related to setting/accepting FirstNme and LastName of user.
I want to know if this is all rite?
If no, then please guide me as to how can I set mandatory fields in my code.
Awaiting Reply.
Thanks and Warm Regards,
Ritu R Hunjan

Hi Ritu,
>>please guide me as to how can I set mandatory fields in my code??
In ur jsp file or in the controls code add the following attribute
<hbj:label id="userIdLabel"
 text="User ID"
 labelFor="userIdInput"
 design="HEADER3"
 required="true"/>
and to check the mandatory entry for that field do this in the submit button
<hbj:button id="insert"
 text="Submit"
 design="emphasized"
 onClick="save"
 onClientClick="if(!isMandatory()) htmlbevent.cancelSubmit=true;;"/>
and in the javascript write the client validation code.
Hope this helps.
Regards,
Joshua Kiran

End User Personalization - Mandatory field does not make it mandatory

I am on GRC 5.3 SP8 and when I set "Company" as "Mandatory" under "End User Personalization", it does not put an "*" next to Company or force the user to fill in the Company field.
How can I make sure that the user enters "Company" when doing a "Create Request form"? I want to make sure a red "*" is next to the field so that they update it. Right now I have a default value in there but I want to make sure they think about what goes in this field.
When I create a custom field and use "end user personalization", the red "*" shows up and an error occurs if they don't fill in the field, but the predefined fields don't work the same way.
Thanks,
Peggy

GRC Experts, please correct me if I'm wrong but from my understanding, the Request Screen in the MyWork tab is for Approvers/Admins/Security i.e. those with UME permissions of some kind. This is not the Request Screen for end users. We actually customize our UME roles to elimate the ability to use this Request Screen. We want all of our security requests to be done in the End User Request Screen.
Unlike the MyWork Request Screen, the End User Request Screen is customizable under configuration-->End User Personalization. As you've noticed, here you can customize what fields you see on the End User Request Screen, what fields are defaulted, etc. For example, for our company, we do not want end users picking and choosing roles. Our end users are not knowledgable on our roles so we save that step for a stage in which Security Admins choose roles for users based on what they asked for in the Request Reason.
Another advantage of using the End User Request Screen is that end users can create requests without having UME permissions; they need only to be authenticated against whatever system you have chosen to authenticate them against (for example, SAP) Configuration-->Authentication. As long as they exist in that system, they can create a request.
Every company is different. For us, we don't like that the MyWork Request Screen is not customizable and requires UME permissions to even access it. So we have essentially taken it away through security (based on the Security Guide provided by SAP).

Determine material master mandatory fields

Hello,
I've developed an workflow based program to create material master.
I want to set all fields in my proram as required
which are defined mandatory in Customizing of material master.
Can anybody give me a hint how to determine the mandatory fields for
material master creation.
What i tried up to now:
I have tried MATERIAL_UPDATE_ALL ( used in MATERIAL_MAINTAIN_DARK )
and then analysed the retrun table. This is working fine when calling from SE37 but
fails when integrated in my own program.
The Problem is:
In SE37 following statement is true altough the fieldsymbol is empty (it's assigned and
really empty, so it should not work).
IF NOT <f3> IS INITIAL.
In my program it fails, which is IMHO correct.
Perheps someone can tell me why?
If you have any other suggestions how to solve my problems let me know.
Thanks for your time and efforts.
Andy Iskalla

Hi,
In MAterial MAster, you can make any field mandatory or optional . It all depends on the business process.\
Read the document from belwo link.
http://help.sap.com/printdocu/core/print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
Any queries, le tme know.
Regards,
Smitha

How to set an mandatory field to non-mandatory.

Hi,
In my form, I will need to set a field to mandatory in certian condition and then set it to not mandatory under different condition.
I know how to set it to mandatory: field.mandatory = "error"
Can someone let me know how to reset the field to not mandatory.
Thanks,
Laura

You can try:
field.mandatory = "disabled";
Thanks
Srini

USER MASTER GETDETAIL

I want to wright interface acc. to BAPI_USER_GET_DETAIL for that i want to create a structure with fields " PSAID,JOBCODE,STATUS,DIVISIONID,DIVISONNAME " can u plz tell me where can i get i mean in which tables or structures the above fields for USER MASTER.

Look in the following table for User Master details:
USR02
Logon data
USR04
User master authorization (one row per user)
UST04
User profiles (multiple rows per user)
USR10
Authorisation profiles (i.e. &_SAP_ALL)
UST10C
Composit profiles (i.e. profile has sub profile)
USR11
Text for authorisation profiles
USR12
Authorisation values
USR13
Short text for authorisation
USR40
Table for illegal passwords
OBJT
Authorisation objetc table
Reward points if useful.

Set Email as Mandatory field in User Master

Similar Messages

Maybe you are looking for