Set Exchange Related Properties task gets rejected
Hi All,
During exchange account creation one of task ‘Set Exchange Related Properties’ is getting rejected with error ‘ incorrect information provided’.
I have tried checking all the attributes in process forms but finding all proper.
Create mailbox task is also getting successful and mailbox for users are getting created properly.
It does not seem to create any problem but just wanted to know how to track down which information is missing.
Any ideas please.
Ritu
Hi, have you enabled logging for the exchange connector?
http://docs.oracle.com/cd/E11223_01/doc.910/e11198/deploy.htm#CHDGFDJI
Similar Messages
-
How can I set the textbox properties to get only integer on netbean?
I use Netbean GUI and I create the swing textbox how can I set it to enter only Integer I don't want the people to enter the string.
Please ask netbeans questions on the netbeans forum.
Sounds like you want a JFormattedTextField or maybe a JSpinner. -
Resource Status shows as provisioned even when task is rejected
Hi,
We have 5 tasks for resource provisioning. The last task gets rejected but still the Resource Status shows as Provisioned instead of Provisioning.
In each and every task, I have mapped the response as below:
C- Provisioned
R-Provisioning
Please let me know if I am missing anything.
Thanks.
Edited by: user11957197 on 24 Oct, 2012 4:22 AM
Edited by: user11957197 on 24 Oct, 2012 4:22 AMHi Kalpna,
Once the the task status in 'Provisioned' status it can't be changed into 'Provisioning' status. It can be either 'Revoked' or Enabled/Disabled.
Above is product limitation.
In your case I guess you have set status on 'Create User' task and this task might successfully completed that's why the resource object status is 'Provisioned'.
Now may you have multiple task after create user. which may fails but as the resource status is in 'Provisioned'. It can't be changed to Provisioning.
This is right as well. Because the account is created at target system no matter some update fails.
However, if you want to set status based on last task satus. you can do as suggested above.But, You can ignore if your case match with my understanding.
--nayan -
Hi Experts,
I am facing one problem, for one user his task getting deleted we recovered from recovery but its getting deleted next day.
The MRM has retention 400 days, task created very old but have a new dew date.
I have created a new task folder and moved the task there, but next day it got deleted.
What could be causing this? how to fix? i have removed the retention policy for this user to check tomorrow also i have collected logs by enabling outlook logging.Hi,
Please check the AutoArchive settings on the Tasks folder: Right click on the Tasks folder,
Properties, AutoArchive. Check if the there's an AutoArchive setting that removed the tasks.
Please also check if there's a 3rd-party add-ins which may influence the Outlook Tasks. By running Outlook in Safe Mode we can test if it's related:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter. If in Safe Mode the tasks don't get deleted, disable the suspicious add-ins to verify that.
I'll provide further assistance if the steps above don't help.
Regards,
Melon Chen
TechNet Community Support -
Exchange server 2013 content filter rejecting all incoming messages as spam.
Hello All,
Today out of the blue our Exchange server 2013 install started rejecting any inbound message as spam. It first started with only one user not being able to receive any mail because of this anomaly and
then after 12 or so hours all users were getting their mail rejected.
I currently had the threshold set to 5 on external messages only. Internal is disabled.
I have tried setting the threshold to 8 and 9, and rebooted the server after restarting
all services just to make sure everything reset. Even dished out a IISRESET just in case. Whatever I tried still does not work.
The install is a stand alone server facing the outside world (no edge server) living
in a 2 domain controller environment with a share point farm thrown in (ESXI5.5 environment)
Everything works just fine and dandy if I disable the content filter all together. Not seeing anything in the application logs out of the ordinary. Everything was working great and the same settings I used on this server worked well for a totally different
server that runs just fine.
Any ideas?
fr0stsp1reRunspaceId : 87157b62-a061-436b-8fb9-dab446be3473
Name : ContentFilterConfig
RejectionResponse : Message rejected as spam by Content Filtering.
OutlookEmailPostmarkValidationEnabled : True
BypassedRecipients : {}
QuarantineMailbox :
SCLRejectThreshold : 6
SCLRejectEnabled : False
SCLDeleteThreshold : 9
SCLDeleteEnabled : False
SCLQuarantineThreshold : 9
SCLQuarantineEnabled : False
BypassedSenders : {}
BypassedSenderDomains : {}
Enabled : False
ExternalMailEnabled : True
InternalMailEnabled : False
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
DistinguishedName : CN=ContentFilterConfig,CN=Message Hygiene,CN=Transport Settings,CN=Smith And
Smith,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=XXXXXXXXXXX,DC=com
Identity : ContentFilterConfig
Guid : 8f86e0b6-da37-42d3-b7cd-b9635b7db271
ObjectCategory : XXXXXXXXXXXXXXXXXXX/Configuration/Schema/ms-Exch-Message-Hygiene-Conten
t-Filter-Config
ObjectClass : {top, msExchAgent, msExchMessageHygieneContentFilterConfig}
WhenChanged : 5/28/2014 12:15:21 PM
WhenCreated : 5/1/2014 4:17:55 PM
WhenChangedUTC : 5/28/2014 7:15:21 PM
WhenCreatedUTC : 5/1/2014 11:17:55 PM
OrganizationId :
OriginatingServer : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
IsValid : True
ObjectState : Unchanged
This is what it is set at now. Completely disabled. It worked fine for quite some time filtering out spam pretty nicely then one day everyone's mail was being rejected as spam by the content filtering agent. I know of someone else who also had this
issue except their box was running 2008R2 with EX2007. They too disabled the content filter as it was giving them too many problems with mail being rejected.
fr0stsp1re -
Need help to check multiple conditions and set AD user properties
hello All,
I have a data csv sheet where information as follows, using below information I need to update AD account attributes based on below conditions . I have full right and I can set any user properties. So this is not access right issue.
samaccountname,Othertelephone,language,employeeId
abcd XXXXXXXXX EN SMS
Now I need to check following conditions:
Othertelephone = if this should not be blank ,if so display message " filed is blank " and no changes should allowed in further attributes and it should abort
language= this field should only contain EN or FR value if No display msg " error in language field " and no further changes to the user attributes and it should abort
employeeID= this field should only contain OTP or SMS value if Not filled display msg " error in Employee ID field " No further changes to the user attributes and it should abort
changes to user will permit when all attributes is filled. I do the testing taking samaccountname , othertelephone and employeeId into consideration but it did not helped. Getting error
THIS is complete Code Of my Task where you need my focus on conditions
group=Get-QAdGroup -SearchRoot "domain/vpn group"
Import-Csv D:\VPN.csv |
ForEach-Object{
if ($_.samaccountname -eq "")
Write-Host "SAMACCOUNTNAME is blank" -fore red
else
$user=Get-QAduser $_.samaccountname
if ($user.memberof -contains $group.DN)
Write-Host "$($_.Samaccountname) user is allready a member" -fore red
else
Add-QADGroupMember $group $_.Samaccountname
If ($_.othertelephone -eq "")
Write-Output "$($_.samaccountname) telephone Number is blank"
else
if ($_.EmployeeID -notmatch 'OTP' -and 'SMS')
Write-Output "$($_.samaccountname) EmployeeID field is not correctly field")
Else
Set-QADUser $_.SamAccountName -ObjectAttributes @{telephonenumber=$_.othertelephone;EmployeeID=$_.EmployeeID}
error
Set-QADUser : Access is denied.
At C:\Users\g512263\AppData\Local\Temp\5f8facb6-f942-4c3d-b924-8953d9a706da.ps1:37 char:8
+ Set-QADUser $_.SamAccountName -ObjectAttributes @{telephonenumber=$_.othe ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-QADUser], UnauthorizedAccessException
+ FullyQualifiedErrorId : System.UnauthorizedAccessException,Quest.ActiveRoles.ArsPowerShellSnapIn.Powershell.Cmdlets.SetUserCm
dlet<title>Untitled - PowerGUI Script Editor</title>
Hello JRV,Thank you for your time, There is no comma in my csv file , I double check. below I wrote a simple code.I removed all the conditions and just try to set the EmployeeID and it is working fine with same file.But as soon as I add conditions it gives access denied. as well as if I remove employee Id from your previous code and only try to set telephone No. still it gives access denied.I am just trying to figure out what is causing this.
$group=Get-QAdGroup -SearchRoot "com/Group"
Import-Csv D:\VPN.csv |
ForEach-Object{
if ($_.samaccountname -eq ""){
Write-Host "SAMACCOUNTNAME is blank" -fore red
}else{
$user=Get-QAduser $_.samaccountname
if ($user.memberof -contains $group.DN){
Write-Host "$($_.Samaccountname) user is allready a member" -fore red
}else
Add-QADGroupMember $group $_.Samaccountname
If ($_.othertelephone -ne "")
Set-QADUser $user.SamAccountName -ObjectAtt Aributes @{telephonenumber=$_.othertelephone}
} else
Write-Output "$($_.samaccountname) phonenumber is blank"
If ($_.EmployeeID -ne "")
Set-QADUser $_.SamAccountName -ObjectAttributes @{EmployeeID=$_.EmployeeID}
}else
Write-Output "$($_.samaccountname) EmployeeID field is blank"
If ($_.Preferredlanguage -ne "")
Set-QADUser $_.SamAccountName -ObjectAttributes @{Preferredlanguage=$_.preferredlanguage}
} else
Write-Output "$($_.samaccountname) PreferredLanguage field is blank" -
We have installed HCM and CRM modules on Fusion Application 11.1.7 version.
This is 2 node architecture ie IDM components installed in one node and Fusion components installed in another node.
We are able to start the IDM components and Fusion components successfully, but when users are trying to access any task from Fusion application home page, they are getting the below error
A portlet consumer error was received for the task Manage Worker Goal Setting Lookups. Report the error details to the following owning product Goal Management.
An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/fnd/applcore/lookups/publicUi/flow/ManageCommonLookupsTF.xml#ManageCommonLookupsTF of module code fndSetup. Review the consumer and producer logs for more details on this error.This may be related to the other issue regarding "FUSION_APPS_WSM_APPID-KEY" as the logs contains exceptions like:
oracle.wsm.policymanager.PolicyManagerException: WSM-02081 : Failed to login to perform requested action.
Please refer to document Fusion Application Service Account Password Expiration Causes Portlet Producer Errors (1486388.1) for steps on how to verify and set the password. There is also exception:
javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User FUSION_APPS_PROV_PATCH_APPID denied
This is also likely caused by an expired password, please see Fusion Apps Servers Are Not Starting Up - Password Policy Error :9000: GSL_PWDEXPIRED_EXCP :Your Password has expired (1629927.1).
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/ -
Line Items are getting rejected in Sales Orders
Hi,
I am creating sales orders using ORDERS Message type and for this I am using the Standard SAP Inbound Function Module to create sales orders.
Idocs are getting processed successfully and sales orders are getting created, but line items in the sales order are getting rejected and hey are getting rejected with reason for rejection to be <b> No Availability Lost</b>.
So, I would like to know if this is a problem with the data furnished in the Idoc or else any custom setting have to be maintained or not?
RaghuramThe reason why they are failing is because in the user exit as per the logic present here whenever a EDI Order with customer Purchaser Order Type DFUE is to be processed ABGRU (Reason for Rejection) has been flagged equal to 01 and hence order item lines are having rejection reason.
-
How can I query all the members of a group using querbuilder? I cannot find any related properties
How can I query all the members of a group using querbuilder? I cannot find any related properties describing members under /home/groups/s/sample_group in jcr repository.
Hi,
FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
FieldPoint systems are now setup in Measurement and Automation Explorer (MAX). Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX. The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
Regards,
Hal L. -
How to set up display properties for a crosstab is CSS?
I am woundring how to setup css class and code like in this tutorial.
myalerting.css ?
Set up display properties for a crosstab: Design Studio 1.2 - YouTube.
Design Studio 1.2: Set up display properties for a crosstab
if you have sample file please share I am sure other can be befits from as well.
I would like to use color display on numbers or icons in seperate column if the value in certain range or a value is below or avove business needs.
Thanks.Kevin,
I could not get this to work on my installation; perhaps you can review and "run with it" or someone better with CSS can assist.
The gist of it is there is a class .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background to define the status symbol for the alerts
Based on your Exceptions in the BEx query, Good 1 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
Good 2 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
etc... Bad 3 (red symbol) is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9Background
I tried the following custom CSS on the crosstab, note using IE (which now we can no longer use until Microsoft patches)
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlternating{
background-color:#F9F9F9 !important;
myAlerting.sapzencrosstab-DataCellDefault{
background-color:#FFFFFF !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_1.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert2Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_2.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
color:rgba(0,0,0,0.0);
background-image:url('green.png');
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9StatusSymbol
color:rgba(0,0,0,0.0);
background-image: url('aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_9.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
I didn't want to hold you up and for sure I hope there is someone in the community who could help. I'll try again when we can use IE -
Relation Properties - Cardinality - "Identifying" vs. "Target Optional"
Version 3.0.0 build 653
Using the logical design, within the "Relation Properties" > "Cardinality" dialog,
the "Identifying" and "Target Optional" checkboxes are mutually exclusive.
Can somebody explain that to me?
The help defines "Identifying" as:
"Controls whether this is an identifying relationship. When there is an identifying relationship between a parent entity and a child entity, when the relational model is generated, the following occurs in the child table: *the foreign key to the parent becomes part of the primary key of the child.* (In non-identifying relationships, the foreign key to the parent table is just another column in the child table and is not part of the primary key.)"
and "Target Optional" as:
"Controls whether the *target entity in the relation must contain one or more instances*. If this option is enabled, there can be zero target instances; if this option is disabled, one or more target instances are required."
Just because a target entity's PK includes the source entity's PK,
why would that require an instance of the target entity to exist?
I'm trying to model a parent/child relationship where an instance of the child entity can't exist without the parent instance (no orphans) but that shouldn't make an instance of the child entity required.
I'm far from a data modeling guru so thanks in advance to whomever can explain what I'm missing.Hi Jeff,
relationship has two ends - if one end is optional that means it can exists on its own (related foreign key columns will allow nulls); if it's mandatory then it can exist only in the context of other end (entity) of relationship.
"Identifying" goes little bit further - FK columns become part of primary key which implies not null columns.
Just because a target entity's PK includes the source entity's PK,
why would that require an instance of the target entity to exist?it doesn't require instance of source entity to exists, however foreign key constraint is created and it requires existence of related instance of source entity.
I'm trying to model a parent/child relationship where an instance of the child entity can't exist without the parent instance (no orphans) you just need to set related child entity as mandatory, no need to use identifying for that. Foreign key will be created for defined relationship when you engineer to relational model and delete rule will be set:
- "no action/restrict" if parent entity is optional;
- "cascade" if parent entity is mandatory;
Philip -
Cannot set Flash button properties from sprite behaviour
I'm puzzled...
I'd like to set Flash button properties from behaviors on the
sprite
itself (unselect all buttons with a sendAllSprites, for
example) but
only this sample script works :
on mouseEnter me
sprite(spriteNum).selected = true
end
those ones won't:
on mouseEnter me
me.selected = true
end
on mouseEnter me
selected = true
end
It must but obvious but I can't get it to work...
Thanks.
PJThe selected property is a property of the sprite. You need
to
reference the sprite specifically when you access it.
When you are using
me.selected=true
the 'me' is referring to the current instance of the
behaviour that is
running. It is not referring to the sprite itself. Therefore,
you need
to use
sprite(me.spriteNum).selected=true
so that you correctly reference the sprite.
You can use the syntax
me.property=true
only if the property in question is a property in that
*script*. -
How to set the show properties as a default in KM
Hello All,
I am trying to upload the documents in KM repository using File-> Upload. If I click this Upload button, it will open a new window, it will show (show properties) this properties. But I want this one as default. Can any one help to set the (show properties) as a default?
Thanks in Advance.Hi Gowsika,
I'm sorry, but you seem not to get my explanation.
First, there is no such "switch" for "Show Properties" or "Hide Properties", and there is also not Resource Type "Show Properties". It is hardcoded in the UICommand "upload" (so in the Screenflow implemented by com.sapportals.wcm.rendering.uicommand.cm.UIUploadCommand), that if the ResourceType "normalrt" (http://sap.com/xmlns/cm/framework/normal-resource-type) displayed "Normal Document" is selected, you will see the "Show Properties" link. Only by changing the implementation of this UICommand you could change this behavior, but it's not recommended because you have to make sure on upgrades that you don't overwrite it again.
So again my suggestion:
1. Go to KM->CM->Configuration->CM->Global Services->Resource Types
2. Duplicate the Resouce Type "normalrt" changing:
Name: my_normalrt
Resource Type ID: http://sap.com/xmlns/cm/framework/my-normal-resource-type
3. Go to KM->CM->Configuration->CM->Global Services->Property Structures->Property Structures
4. Duplicate "DefaultPropertiesStructure" changing:
Name: My_DefaultPropertiesStructure
Resource Types: http://sap.com/xmlns/cm/framework/my-normal-resource-type
Structure Items: "Input_here_your_properties_and_property_groups"
BTW: If you want to have the same properties as in DefaultPropertiesStructure you might be obligated to remove some of them from the original Property Structure.
5. Go to KM->CM->Configuration->CM->User Interface->Commands->UI Commands
6. Duplicate "new_file" changing:
Alias: my_upload
Parameters: ResourceType=http://sap.com/xmlns/cm/framework/my-normal-resource-type,standalone=true
7. Go to KM->CM->Configuration->CM->User Interface->Commands->UI Command Groups
8. Edit AdminNewResourceGroup by renaming upload to my_upload in the "Commmand List" parameter.
BTW: It's advisable to duplicate the whole Command Group and use it in your Layout Set and not to change the standard configuration, but I will not describe the whole process here
9. Now go to KM Content and use the menu Folder->New...->Upload
Hope this helps,
Robert -
[solved] Iptables - open port still gets rejected
I am trying to open 2 ports in my firewall,5582 udp and 61185 udp and tcp. However after reading up on iptables and following this guide (https://wiki.archlinux.org/index.php/Si … l_firewall) these ports are still being blocked. I am new to iptables, and I've gone over the rules but still not seeing what is rejecting it. Note that 61185 gets rejected not dropped at lest the tcp. All other tested tcp ports are dropping. I have not yet been able to test udp but i assume that its not working ether. Here's my iptables rules.
# Generated by iptables-save v1.4.10 on Tue Jan 18 15:37:23 2011
*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [2235:279476]
:TCP - [0:0]
:UDP - [0:0]
-A INPUT -s 127.0.0.0/8 -i wlan0 -j DROP
-A INPUT -i lo -j ACCEPT
-A INPUT -m state --state INVALID -j DROP
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A UDP -p udp -m udp --dport 5582 -j ACCEPT
-A UDP -p udp -m udp --dport 61185 -j ACCEPT
-A TCP -p tcp -m tcp --dport 61185 -j ACCEPT
-A INPUT -p udp -m state --state NEW -j UDP
-A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j TCP
-A INPUT -j REJECT --reject-with icmp-proto-unreachable
COMMIT
# Completed on Tue Jan 18 15:37:23 2011
# Generated by iptables-save v1.4.10 on Tue Jan 18 15:37:23 2011
*nat
:PREROUTING ACCEPT [1765:224576]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [2859:262280]
:POSTROUTING ACCEPT [2860:262320]
COMMIT
# Completed on Tue Jan 18 15:37:23 2011
Last edited by tsr-nc (2011-01-22 01:06:44)yes iptables is part of my DAEMONS array.I have reset my /etc/sysctl.conf.
sorry my previous post i ran those commands with iptables disabled and my receiving program off.
Your original post said you are trying to open UDP 5582 and TCP+UDP 61185, however there is nothing on your computer listening for these ports, so you are getting the connection rejected messages because iptables is allowing the packet, but the kernel has nowhere to send the packet (ie, a listening application process) so the kernel closes the connection attempt.
Thank you i didn't understand that before
updated
iptables -nvL
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 DROP all -- wlan0 * 127.0.0.0/8 0.0.0.0/0
5449 1026K ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0
1 40 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID
953 400K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
60 8029 UDP udp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW
21 924 TCP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 state NEW
80 8909 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-proto-unreachable
Chain FORWARD (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 6682 packets, 1176K bytes)
pkts bytes target prot opt in out source destination
Chain TCP (1 references)
pkts bytes target prot opt in out source destination
1 44 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:61185
Chain UDP (1 references)
pkts bytes target prot opt in out source destination
0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:5582
0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:61185
netstat -tunlp
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 127.0.0.1:8118 0.0.0.0:* LISTEN 4042/privoxy
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 4073/cupsd
tcp 0 0 0.0.0.0:3128 0.0.0.0:* LISTEN 25380/(squid)
tcp 0 0 127.0.0.1:9050 0.0.0.0:* LISTEN 4071/tor
tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 4071/tor
tcp 0 0 127.0.0.1:58846 0.0.0.0:* LISTEN 5472/python2
tcp 0 0 127.0.0.1:32000 0.0.0.0:* LISTEN 30205/java
tcp 0 0 0.0.0.0:9030 0.0.0.0:* LISTEN 4071/tor
tcp 0 0 ::1:631 :::* LISTEN 4073/cupsd
tcp 0 0 ::1:8888 :::* LISTEN 30205/java
tcp 0 0 ::ffff:127.0.0.1:8888 :::* LISTEN 30205/java
tcp 0 0 ::ffff:192.168.1.1:8058 :::* LISTEN 30205/java
tcp 0 0 fe80::215:afff:fe0:8058 :::* LISTEN 30205/java
tcp 0 0 :::6600 :::* LISTEN 4022/mpd
tcp 0 0 ::1:9481 :::* LISTEN 30205/java
tcp 0 0 ::ffff:127.0.0.1:9481 :::* LISTEN 30205/java
udp 0 0 0.0.0.0:51774 0.0.0.0:* 5472/python2
udp 0 0 0.0.0.0:631 0.0.0.0:* 4073/cupsd
udp 0 0 0.0.0.0:4827 0.0.0.0:* 25380/(squid)
udp 0 0 0.0.0.0:43802 0.0.0.0:* 25380/(squid)
udp 0 0 0.0.0.0:3130 0.0.0.0:* 25380/(squid)
udp 0 0 0.0.0.0:3401 0.0.0.0:* 25380/(squid)
udp 0 0 0.0.0.0:44777 0.0.0.0:* 5472/python2
udp 0 0 :::56760 :::* 30205/java
udp 0 0 :::5582 :::* 30205/java
udp 0 0 :::8008 :::* 30205/java
udp 0 0 :::8008 :::* 30205/java
udp 0 0 :::1900 :::* 30205/java
udp 0 0 :::1900 :::* 30205/java -
Setting values to properties on load
Hi,
I have a big Trouble on Data Populating to the components on page loading like,
Have page1 and page2.Based on ID passed from page1,query should execute and results should set to the form on page2 through Backing Bean.
What doing is..
using setActionListener passing ID from page1 and setting to method in page2 as argument which gets results based on ID and sets to component properties, here the problem is..
Before page2 loads method called first from setActionListener where we cannot set the values to properties before loading.
How can we set values to components in backing bean only on load based on ID from other page.
And one more issue is, if we make any code in setter property it get executes every time,
what is the correct procedure to execute the method only on loading.
Does there any procedure to make method to excecute only on load.
Please suggest me, how can i overcome this issues,these were become major issue for the Development.
Thanks,
Bandaru.hi,
we tried to achieve the same thing.. But its not possible to set the values to individual segments of a KFF..
Thanks,
raghav.
Maybe you are looking for
-
we purchased photoshop elements thru amazon.ca.when we try to install it wants a 24 digit serial # and none of the #s we have matches what is asked for can anyone help?
-
Upgrading fra InDesign CS5 to CS6
When upgrading from version CS5 to Version CS6 i get an error message when asked to enter CS5 Serial number. The Serial Number You entered is invalid. Please try again. I don't know what to do next. Please advice. Best Regards Andreas Vilner
-
Does anyone snows how I can see my websites history and emails history help ASAP
Help details
-
Most of the applications won't run..
after i had updated My phone from symbian Anna to symbian belle,it works fine at first...but after sometimes,most of the applications wont run.(i hope i did nothing) let me label the applications.(these applications are packed with symbian belle upda
-
Will daylight savings changes break OD if not done?
I've got a client a few hundered miles away with a 10.3.9 open directory server. I'm not sure I can get over there to apply the DST patches before the time comes. Can this break OD authentication in some fashion if not done? Since the actual authenti