Set exported resolution for each image within InDesign

I'm generating a document in InDesign destined only for the screen (as a PDF) and I'm wondering whether in CS6 the user can set the exported resolution separately for each image. i.e click on a image and set the resolution for that image. Reason: to allow end-viewers to zoom in on certain images and retain quality.
And while I'm on the subject of changing resolution, a few years ago someone wrote a script for me (in response to a post), that when you clicked on an image within InDesign, resampled the original to 300 dpi, saved it, and made the necessary adjustments in InDesign so the image stayed the same size.
Can CS6 do that? Or do I need to dig up the old script?

> ... destined only for the screen (as a PDF) ...
The developers of PDF will thank you for that statement!

Similar Messages

Insert multiple images in one slide and setting dsiplay time for each

Hi,
I am using Adobe Captivate4.
I could not able to insert multiple images in one slide and set display time for each image.
Need help in this regard.

This is not about background image.
I have 3 images and want to insert in one slide only. I could able to insert image1 for first time, but could not able to insert image2 and image3.
I have followed the same steps: Insert Menu>Image.

How to set command action for each item in the popupmenuimage

Hi all,
In my canvas application,i used images for popupmenu.Now i have to set command action for each item in that popupmenuimage.I dont know whether it is possible in canvas or not.Can anyone tell me the solution for this .
Thanks,
sourab

Buttons is typical of a c/s application, or, in case of Web Forms, a Java applet. Instead of buttons, you have to use hyperlinks.
See:
http://otn.oracle.com/products/reports/htdocs/faq/faq_migration.htm#346
The hyperlink wil have to be to a URL that does the insert in the table. This can be a mod_plsql procedure, for instance.

Is the number of histogram pixels the same for each channel within each layer?

Dear Photoshop Scripting Forum:
I have written a script to isolate the number histogram pixels for each channel within each layer of a file.
However, I have found some unexpected results: That, the number of pixels is the same for each channel within each layer.
For example,
Layer 1 has 18,979 pixels by itself, and so does each channel within it (Red, Green, and Blue)
Layer 1, Channel Red, has 18,979 pixels
Layer 1, Channel Green, has 18,979 pixels
Layer 1, Channel Blue, has 18,979 pixels.
This does not seem right to me.
Does someone else have the same experience, or knowledge of something else?
I am wondering if there is a bug in my script.
If need be, I will post the script, but it's kind of long for a forum.
Thank you.

The following is for RGB 8bit images.
The red historgram is an array of red values of the pixels that range from 0 to 255. Each element in the array has the number of pixels that have that red value. So for example if you had a layer that is pure red 255,0,0 all the pixels would be in the 255 element and there would be no pixels in the other elements. The red historgam still has the same number of pixels as the layer. They are just all in one histogram element( they all have the same value ).
But even if you know that all the pixels in a layer are all in the last element(255) of the red histogram you still don't know the color of the pixels. A white pixel has a red value of 255. So does a yellow, magenta, etc pixel. If you only know the red value of a pixel the pixel could be one of over 65000 colors. Most of which would not be considerd 'red'
It is the three channels together that detemine a pixel's color. Unless the layer is one color you can not tell the color of the pixels from looking at the histogram.
Unless you use the color range selection then get the histogram of the selection. Even then you need to decide what color value make up 'red'

Export Tags for Paragraph styles in Indesign CC without classes

With CS6, when you set export tags for para styles, you could export them to epub without classes, for example body text as p, headings as h1 or h2 etc - without need for classes. This made very simple code. With Indesign CC, it seems that classes always get added no matter what. So all your body text is tagged with p with a class of normal or something. Is there a way to go back to setting export tags as straight p of h1, h2 tags??

Nope. It was an intentional change on our part for CC.
I do understand there are a number of folks who would like the option to do this on a per Style basis and I'm very actively considering it for a future CC update.
Douglas Waterfall
Architect, InDesign Engineering

Setting different resolutions for different displays?, setting different resolutions for different displays?

Hi,
I have a 30" dell display that I have used with my MBP. I recently got a MBA and installed mountain lion. One of the things they inexplicably removed was the ability in the menu bar to set different resolutions for different displays. The only way I can get my Dell Monitor to work is to use mirroring. But I don't want mirroring. I want two separate displays. In Snow Leopard, the drop down display menu in the menu bar allowed you to pick different resolutions for different displays. Is there any possible way to do that in Mountain Lion?
Tom

Yes, assuming that the 8" display has a resolution that the Mac can support. When you open the Displays system preference, you'll get a settings window on each display (as long as the option for Mirroring isn't checked).
Regards.

Set height size for each state enabling browser scrollbar if needed..

I'm working on a flex project, completely new to it. I'm trying to resize my application based on the set height size for each state. I'd like the wrapper to resize in the browser so that the browser's scroll bar appears if needed. hope this makes sense....
My enitial opening page I've set the height to 1000. now when I click on a link to another state from this page, we'll call it 'home' which i have set to 2000
The page opens in its 2000 height but no scroll bar appears to scroll down in the browser...
If anyone's done this or knows how to, I'd really appreciate your input.

I've done something similar with a few of my apps, you have to use a little javascript on the html page and the ExternalInterface class in your app. Basically, you need to resize the "browser's" height based on your flash file. So here's quick example:
In your html template page (which you can edit in your flashbuilder project panel ->html-template->indext.template.html)
in your html add the jscript function:
<script type="text/javascript">
function setWindowHeight(heightVal){
document.getElementById('theWindow').style.height=heightVal; // make sure to give the body tag an id of 'theWindow' or whatever
</script>
In your flashbuilder app you need to call the javascript fx, you can use the ExternalInterface class for this:
ExternalInterface.call('setWindowHeight',val+'px');
you need to send the jscript fx the height of your container or whatever you want it resized to....

Set a FocusTraversalPolicy for each of the JPanels

I have a JInternalFrame that contains a JTabbedPanel that contains 1...n JPanels
I want to set a FocusTraversalPolicy for each of the JPanels
independently.
Each JTabbedPanel has many JComponents.
Please help ME

I don't know much about JTabbedPanel but I imagine you can get each of the JPanels contained in it. So couldn't you just set FocusTraversalPolicy for each of them? I guess I really don't understand what the problem here is.

Unable to set GL Account for each ItemGroup in Inventory

Hi,
I am Using SAP b1 2005b Patch level 27.
I created one database with "Chart of Accounts INDIA." then I got Default Chart of Accounts.
I want to set GL Account for each ItemGroup in Inventory.
How to assign the Perticular GL Account for Particular Item Group? where can i find this provision in SAP b1?
I am trying from past 2 days, I did not get the way to assign the GL Account for each Item Group.
Plz help me asap.
Regards,
Nagababu.

Hello,
you can set it in the module administration --> setup --> inventory --> item group --> tab accounting. But first you must define the name of item group. it is still in the same form.
let me know if problem still persists. G'luck.
Rgds,

Set spawn points for each sprite?

heres my dilema
i currently have 5 sprites and 5 different set co ordinates for each one to spawn into with individual behaviour scripts, however i want each sprite to spawn into one of the set co ordinate without more than one of them spawning into the same point.
so eventually each sprite will spawn into a random set co ordinate
so something like
pRandomStartingLoc = (200,100) (300,100) (400,100) so each sprite spawns into only one set of cordinates without more than one spawning into the same one

Okay fourth time may be the charm.
This behavior contains a Single Locations list that is global to all sprites with this behavior attached. Each sprite picks a random loc from the list and then deletes that value from the list so that no other sprite can use it.
Note: This uses some advanced Lingo, but you should only need to replace the point values in the list of point values.
-- Random Set behavior
property pSp   -- this sprite
property pStartLoc -- this sprites location at beginsprite
-- global/static behavior property
property curLocs -- list of sprite locations used by ALL sprites with this behavior attached
on beginSprite me
-- define our quasi global locations list if it is not defined or is empty
if me.script.curLocs.voidP OR me.script.curLocs = [] then
    me.script.curLocs = [point(200,100), point(300,100), point(400,100), point(500,100), point(600,100)] -- Define Sprite Locs Here
end if
Locs = me.script.curLocs
pSp = Sprite(me.spriteNum)
pSp.loc = Locs[random(Locs.count)]   -- set my location to random point from list
Locs.deleteOne(pSp.loc) -- remove this Loc from list so that no other sprite can use it.
pStartLoc = pSp.loc -- store current location in case you want to return to it
-- debug code. Check message window
put "Sprite " & me.spriteNum & " is at location " & pSp.loc
end beginSprite
on goToStartLoc me
pSp.loc = pStartLoc
end
on endSprite me
me.script.curLocs = void
end
on reset me
me.endSprite()
me.beginSprite()
end

Is there a way to create separate PDFs for each layer in Indesign?

I have a multi-layered InDesign file, and I would like to generate a PDF for each of the layers. I was able to create a LAYERED PDF file (one PDF page with layers), which is great, but I also need a multi-page PDF...one PDF page per layer.
Is there a way to do this? Do I need a script? Or is there a way to extract the separate layers from the layered PDF?
Any help would be much appreciated. Thank you.

Check this script:
http://indesignsecrets.com/page-exporter-utility-peu-5-script-updated-for-cs3.php
Hope that helps.
Marijan (tomaxxi)
http://tomaxxi.com

Processing several images in a batch action to apply their individual auto camera raw auto setings individualy for each image selected.

Hi,
I have a folder with several images that I want to apply Camera Raw auto settings to all of then according to their individual parameters.
When you open a single file in Camera Raw you can click on the "auto" option to make an start point correction for that image.
I want to select all images in a folder and apply this procedure to every selected file without having to open every file individually and clicking in the auto option.
Can this be done from Bridge CC 6.1.0.116?
Appreciate comments on the viability of this task

kbarre wrote:
Auto Sync is functioning as expected, unless I choose Auto Tone first.
If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not.
Lightroom's handling of auto-tone leaves something to be desired - I have a lot of experience with it, trying to make reliable develop-setting plugins which include auto-toning. Those plugins have a bewildering amount of logic - something like this: initiate auto-toning, check back to see if it has properly settled, issue the auto-toning again if it never seems to be properly settling... - usually it works out after a while, but even sometimes it never does, and generates an error: can't get auto-toning to settle across all photos.
The point of all this is that there are bugs in Lr's handling of auto-toning, as you are growing aware.
Try this:
* do the auto-toning, then let it percolate for a while.
* then visit each photo at 1:1 (to force Lr to finalize settings...), and confirm auto-toning has settled...
Then try auto-syncing that preset (make sure process versions are all the same, and preset does NOT include auto-toning - I would leave process version OUT of your presets).
Better?
I don't expect this is a workflow you'll want to do all the time, but as a test it might help shed some light on the problem.
Rob

Setting the resolution for external monitor

Hello all,
I just purchased a ViewSonic vx2025wm 20.1" external monitor for my PowerBook G4 1.5Ghz 12". I've scoured the discussions regarding my question, but couldn't seem to find it. So I'll post it here...
I've successly connected the ViewSonic to my PB and the image seems to display fine in "spanning" mode (ie images span over two screens). However, when I try to "mirror" (ie have the same view show on both screens) the external monitor displays a 1024x768 resolution (the PB displays this as well, but that is the optimal resolution for the 12"). My question is this: how can I mirror while having each screen display its optimal resolution (the optimal resolutions would be 1680x1050 for the External monitor, and 1024x768 for the PB).
Thanks in advance for any wisdom on this!
PowerBook G4 1.5 Ghz 12 inch Mac OS X (10.4.6) 1.25 Gig RAM

Thanks for the quick response -- and one follow-up question. Will turning mirror off (which, if I understand correctly, will place the displays in spanning mode) cause a strain on my PB? Since the PB will be supporting the displays of both the external monitor plus its own display. Does that make sense? I actually read something related to this in these discussions which is why I brought it up. I will try to locate that discussion and place a link in this thread so I can better explain.

GarageBand - How to set different BPM for each track?

Hi, for the last couple of years, I've been using Sony Acid on my PC to mix multiple tracks to make blends and remixes of songs. I've just switched of the a MacBook, and am trying to get Garage Band to do the same. I'm curious whether or not I can set the BPM of each track individually so they will all play at the same BPM when mixed. I'm only able to find the master BPM that changes the entire BPM. Any help would be great. Thanks in advance.

Well, as far as I can see you don't really want different BPMs on each track, but you want all tracks to have the same tempo - only you want to make the tracks fit that tempo.
You could do that in GB by first bringing each of the tracks to the desired tempo, then export it and re-import it. (There's some other ways to do it, but they all involve some fiddling around and maybe some math.*)
Logic offers a nice feature where you can shorten and lengthen a region just by dragging it out. That could be used for the purpose you're trying to achieve.
*For example: Determine the BPM of each of the tracks. Set the project's tempo to the BPM of track A. Import track A, turn it purple so it follows the tempo. Then set the project to project B's tempo, import it, etc. You will end up with all tracks in the same tempo, and you can still make the whole project go faster or slower.

How to remember checkbox values for each image

The situation is this: i have a horizontal list which i
populate with images loaded from xml. After i click on any of the
images, popup windows is displayed with checkbox. The same popup is
displayed for all of the images after i click on them. I need to
remember checkbox values (on/off) for each one of the images in
horizontal list but i don't know how to do that? How can i know
which one of the images (they are different) inside horizontal list
i clicked on in the first place?
thank you

I am sorry but i don't quite follow you, i am not sure what
you are saying so i would really appreciate it if you could explain
it to me a little bit further. I have the following mxml code where
i define my HorizontalList:
<mx:HorizontalList height="326" width="935" id="imageList"
itemRenderer="mx.controls.Image" columnWidth="427" rowHeight="320"
itemClick="popUpWindow()" backgroundColor="#4A4A4A"
borderColor="#444242" themeColor="#000000" verticalCenter="166"
horizontalCenter="0">
</mx:HorizontalList>
and following "popUpWindow()" function which i call when
image in HorizontalList is clicked:
//previously i populate horizontal list with images from an
array "slidePathAC"
imageList.dataProvider = slidePathAC;
public function popUpWindow():void{
trace ("\npopUpWindow function")
var tw:TitleWindow = new TitleWindow();
tw.showCloseButton = true;
tw.setStyle("borderAlpha",0.9);
mx.managers.PopUpManager.addPopUp(tw, MainPanel, true);
tw.width = 500;
tw.height = 500;
mx.managers.PopUpManager.centerPopUp(tw);
tw.addEventListener("close",removePopUp);
Thank you very much for your help

Set exported resolution for each image within InDesign

Similar Messages

Maybe you are looking for