Set filter in R3AC1 for material master
dear all,
we are using SRM 5.0 (Extended Classic Scenario)
we have done the base line configuration. now we are trying to replicate the data from backend (R/3)
I have tried to set a filter in R3AC1 transaction. It is working fine for all except material master.
It pops me an erro msg "Filter option '' is not possible for Object MATERIAL".
There is a SAP note on this error msg (762529).
According to this note, i need to upload a correction in funtion module which belongs to the software component
BBPCRM release 4.0.
I dont see this component in my system.
My qwery is weather we need this component for SRM 5.0?
if no, then how do we overcome the error msg?
Thanx n Regards
Abhishek Ganguly.
Dear Friends,
I am also faced this type of error in CRM 2007 SP5. I tried below steps and it is working.
1. Type your inputs in R3AC1
2. Press enter. System will thorugh error message as " Filter option '' is not possible for Object MATERIAL".
3. Then, press ok.
4. Go to debug mode. ie. enter /H in command field then press enter. Now, come to filler tab and press enter.
6. Now, debug mode is switched on
7. Set Break point at CALL FUNCTION 'SMOFFILTAB_CHECK' (ie. Main Program:SAPLSMOF_CUSTFB1 & source code of: SMOF_CUSTFB_FORM)
8. Get into the function module.
9. System checks the table "smoffiltab". If table is empty, system will through fillter option not possible error. If you are not maintained any fillter in MATERAL object, the table will be empty. so, now set value as "S" in lv_smoffiltab-filtersys variable.
10. Now, system will accept your entry.
I dont know, this method is right or wrong. But, it is working in CRM 2007. In SRM you may also check it.
Thanks & Regards,
Rajagopal
Chennai - INDIA.
Similar Messages
-
Approval for Material Master Creation !
Dear All ,
My requirement is to have approval process for Material master. is it possible.?
My Client is expecting approval process same like PO ( release strategy )
Is there any standard approval process for every masters which are created as part of MM transactions.
Can it be achieved by means of any workflow.?
Thanks
JinoyHi,
Yes it can be achieved by Work flow & also through the Enterprise Portal development.
If you have Workflow consultant you can take a help in setting up the approval for Material master creation.
If you want high fund & centralization of Material master you can go for EP development but Cost & effort will be on higher side.
Discuss with your Workflow consultant he will help you.
rgds
gsc -
SRM and MDM for material master in SRM contracts for multiple R/3
Dear all,
my question is:
We are implementing SRM 4.0 in classic scenario with multiple R/3 back-end and we want to set-up Global Outline Agreements in SRM in a multi-backend environment where the Material Master are not harmonized.
We heard that MDM and COntent Integraton can be a solution.
Then detailled question is:
Can we have 2 material numbers (e.g. ABC and XYZ) in 2 different R/3 systems refering the same product.
Have the mapping done in MDM (Content Integrator?) to a third material number:123
Replicating the material master 123 to SRM from MDM(?)
Create global Outline Agreements in SRM for Material Master 123.
Distribute the GOA as Outline Agreement to R/3 system 1 with the translation to ABC and to R/3 system 2 with the translation XYZ, all of that during the distribution step (or another).
Have the call-offs quantities correct on 123 in SRM and BW?
IF yes, how is it working, do you have some documentation discribing the scenario and the config steps to do?
Thanks in avanceHello RD,
That's a good question.
You are on the right way. MDM is the tool for you.
But..
Content Integrator (CI) was first developped for Shell, to address the need of cross-referencing of material/supplier/category IDs, for:
- reporting purpose (actual Spend Analysis)
- mapping purpose (send of XML PO)
CI was later "fusionned" into the new MDM (1.0) solution.
So now, you can not order CI without MDM (even if some SRM slides still present CI).
But mapping API where developped for all inboud/outbound interfaces in SRM, for materials only (good luck for you).
You will find everywhere this piece of code:
Call ECI
CALL FUNCTION 'BBP_PRODUCT_MAP'
TABLES
it_input = lt_mapping_in
et_output = lt_mapping_out
EXCEPTIONS
logsys_not_found = 1
driver_not_found = 2
product_not_found = 3
internal_error = 4
OTHERS = 5.
So it is ok, you have the mapping call, but I don't know if all the rest of the process was really "finalized" (call of API mapping in CI, via XI). I personnaly never used it, but I assume it should work.
I my opinion your process is supported by SAP:
- Extract materials from both R/3 and consolidate them as a single product in MDM.
- Distribute this product into SRM.
- Maintain contracts on those products.
- Distribute them to R/3 (The ECI call is also used during contract distribution).
- Call offs corrects in SRM and BW
For MDM documentation, look at netweaver area of service.sap.com.
For MDM/SRM integration, look at SRM 4.0 spend analysis:
https://websmp206.sap-ag.de/~sapdownload/011000358700004424262004E/GlobalSpendOverview.ppt
For SRM contract distribution, call-offs, BW, look at SRM in details in service.sap.com/srm/SRM4.0:
https://websmp206.sap-ag.de/~sapdownload/011000358700001966382004E/contracten.ppt
For SRM5.0, see online help on help.sap.com.
Rgds
Christophe -
User exits for Material Master in ECC 6.0
Hello,
We would like to have a function for checking descriptions when we are saving a material in the material master. We are today running R/3 on release 4.6C and as I understad there are no user exits at that point for this release. We are going to do an upgrade to ECC 6. Do you know if there are more user exits for the material master for this release?
Regards
Ann-SofieFollowing are the user exists available for Material master :-
-> MGA00001
Enhancement and addition of checks and (limited) changes to data
-> MGA00002
Control for the material number assignment
-> MGA00003
Control for the material number display
-> MGV00001
Distribution via ALE
-> MGV00002
Read customer-specific filter objects for a material -
Message Type for Material Master Data Changes
Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa -
Need to create a Store Business document type for material master and store a sharepoint link
Hello,
I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a store business document that it will automatically saves to sharepoint?)
Thanks,
Ran.>
dhayes12 wrote:
> A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
>
> B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
>
> Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
Thanks!!! -
Step by step instruction for Using LSMW Recoding method for Material Master
Guys,
Can some one explain step by step procedure for uploading the materials master data to R/3 by using LSMW Recoding method. By the time you reply I will go through the rule of uploading the data..
Thanks guys,
Dhanu.Hi,
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
The LSM Workbench covers the following steps:
(1)Read the legacy data from one or several files (e.g. spreadsheet tables, sequential files)
(2)Convert the data from source format to target format
(3)Import the data using standard interfaces (Batch Input, Direct Input, BAPI, IDoc).
The Steps for LSME are:
Example: Customer Master upload:
LSMW to Update Customer Master Records with Transaction Recording
Call Legacy System Migration Workbench by entering transaction code LSMW. Every conversion task is grouped together as Project / Subproject / Object structure. Create a Project called LSMW_DEMO and a Subproject as CUSTOMERS and Object as CUST_REC
Step 1: Maintain Object attributes
In this example, you will be updating the customer master records with the help of recording a transaction (XD02). Choose radio button Batch Input Recording and click on the recording overview icon to record the R/3 transaction. Enter the Recording name as XD02_REC, the description as Customer Master Updates Recording, and the transaction code as XD02.
Step 2. Maintain Source Structures
Give a name and a description to the source structure
Step 3. Maintain Source Fields
In this step, you need to list what fields are present in the source structure. The easiest way is to click on u2018Table Maintenanceu2019 icon to enter Fieldname, Type and Length for each field
Step 4: Maintain Structure Relations
Execute a step to u2018Maintain Structure Relationsu2019. Since, there is only one Source and Target Structure, the relationship is defaulted automatically.
Step 5: Maintain field mapping and conversion rules
Field RF02D-D0310 represents that you chose u2018Sales viewu2019 for the customer Master screen accordingly its value should be set to X. Keep your cursor on field RF02D-D0310 and click on Constant rule icon to choose the constant value of u2018Xu2019.
If your source file already has the field value, you choose rule u2018Source Fieldu2019.
Keep cursor on field u2018KUNNRu2019 and click on u2018Assign Source fieldu2019 icon to choose source field CUSTOMER from structure XD02S
Step 6: Maintain fixed values, translations, user-defined routines
You can also maintain re-usable translations and user-defined routines, which can be used across conversion tasks. In this case, that step is not required.
Step 7: Specify files
In this step, we define how the layout of the input file is. The input file is a [Tab] delimited with the first row as field names. It is present on my PC (local drive) as C:\XD02.txt.
Step 8: Assign files
Execute step u2018Assign Filesu2019 and the system automatically defaults the filename to the source structure.
Step 9: Read data
In this step, LSMW reads the data from the source file (from your PCu2019s local drive). You have the option to read only selected rows and convert data values to Internal format.
Step 10: Display read data
This step is optional. If required, you can review the field contents for the rows of data read.
Step 11: Convert data
This is the step that actually converts the source data (in source format) to a target format. Based on the conversion rules defined, source fields are mapped to target fields.
Step 12: Display Converted data
Again this is an optional step to view how the source data is converted to internal SAP format
Step 13: Create batch input session
Once the source data is converted in an internal format, you can create a batch session to process updates.
Step 14: Run Batch Input Session
You can execute the BDC session by Run Batch input session. Executing a batch input session is a standard SM35 transaction for managing BDC sessions. Once you have successfully executed the batch input session, the customer master records are updated in the system. You can confirm this by viewing the customer master records (XD03).
Follow the link for material master
http://www.sap123.com/showthread.php?t=98
Regards,
Biju K -
Creation of New T Code for Material Master
HI,
I have to create a new T Code for Material Master Change i.e. for MM02, with writing restrictions to few fields. How to achieve this?
Thanks and Regards,
Hari Prasad.Hi Hariprasad,
If restricting certain fields using field selection option is not suitable for you, you can go ahead with the option Screen Variend
Also refer the link
[https://wiki.sdn.sap.com/wiki/display/Snippets/Transaction%20Variant%20-%20A%20Step%20by%20Step%20Guide%20for%20Creation] -
Issue in LSMW for material master using standard input program RMDATIND!!
Hello guys,
I have a issue in LSMW for material master.
I have a custom field in MARA table. which I want to add in my LSMW.
I added the field in BMMH1 structure. I'm passing the value to this field, But it is not populated in the table when I run it.
Is there anything else I need to do apart from addition of field in the structure BMMH1.
Thanks in advance for your help.
Regards,
Sumeet....see oss note 44410, it gives you a step by step overview.
https://service.sap.com/sap/support/notes/44410 -
BAPI for Material master update
Hello,
I need to upload and change data to the classification screen of Material master (MM01/02). I am thinking of using BAPI_CHARACT_CREATE and BAPI_CHARACT_CHANGE. Can we use BAPI_MATERIAL_SAVEDATA to upload and change characteristic data for material master(MM01/02)?
Can anybody provide me some sample code for mass upload and mass change of characteristic data to material master?
Thanks in advance
Rajesh.Hi Rajesh,
You can use standard SAP program <b>RCCLBI03</b> to do mass upload.
Please check the program documentation for more information.
Also you can take a look this BAPI/FM.
<b>BAPI_OBJCL_CREATE
BAPI_OBJCL_CHANGE
CLVF_INSERT_AUSP
CLVF_UPDATE_AUSP
CLVF_VB_INSERT_CLASSIFICATION</b>
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Uploading sales text and Purchase order text for material master
Hi,
I have created, material master with LSMW byt not updated SALES TEXT and Purchase order text with LSMW now i want to uplaod the sales and po text for material master can you give some link or ref. code to upload the text i have near 1000 items for which i want to uplaod text when i have done the recording with SHDB i have not found filed in recording.
regards,
zafarHi,
I have made the code in se38
as below but still it is not working
REPORT ZTEST_TEXT.
data: headerl like thead occurs 0 with header line.
data itab3 like tline occurs 0 with header line.
headerl-tdobject = 'MATERIAL'.
headerl-tdname = '00000000000LSMW123'. "(Material : 000000000300000560, Sorg : 0001, Dist channel: 01)
headerl-tdid = 'BEST'.
headerl-tdspras = 'E'.
append headerl.
move '*' to itab3-tdformat.
move 'Testing PO text' to itab3-tdline.
append itab3.
call function 'SAVE_TEXT'
exporting
header = headerl
insert = ' '
savemode_direct = ' '
tables
lines = itab3
exceptions
id = 1
language = 2
name = 3
object = 4
others = 5.
IF SY-SUBRC = 0.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
OBJECT = headerl-tdobject
NAME = headerl-tdname.
ENDIF.
break-point.
regards,
zafar -
Table name for material master change
What is the table name for material master change, so that I can get the old values and new values at plant level.
More specific:
I want to check the old values for Re order point and Safety stock in MRP1 and MRP2 fields in material master for many materials. Please help.Use CDPOS and CDHDR table to get the values which were changed.
CDPOS>use fields Change doc. object give in as MATERIAL and in the Table name>MARC -
Can anyone Explain about Data conversion for Material master In SAP MM
Can anyone Explain about Data conversion for Material master, Vendor In SAP MM
ThanksHi,
Refer following link;
[Data Migration Methodology|http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc] -
Most use ful t code for Material Master changing
Dear All,
Can any one give me most useful T-codes for create, change and display material master.
I have one T-code which is very useful for material master it is "MM50". With help of this tcode you can see material extend detail and also you can delete mass material with help of this tcode.
So please use it and also give me other this type of tcodes.
Regards,
Mahesh WaghHi,
MM17, LSMW, MM50 --- These are the 3 main transactions which is used frequently to Mass change the Material master.
There is one more option is there using BDC Upload.
Batch Data Communication or BDC is a batch interfacing technique that SAP developed. It is mainly used for uploading data into the SAP R/3 system. BDC works by simulating the user input from transactional screen via an ABAP program.
The data input data file will come in the form of a flat file which the user save as file type txt file or prn file from the Microsoft Excel program. An Abaper will create a program to read the text file and upload into the SAP system.
Transaction -- SHDB will be used to record the change material master. After, the simulation, the Abaper can generate a sample program and modify from there. It makes the programming easier and faster.
For a BDC upload you need to write a program which created BDC sessions.
hope you got it. Take a help of ABAPer for this BDC Upload.
rgds
Chidanand -
Which table could i find 'Authorization Group' used for Material master?
Hi experts,
Is there any table available could i find all 'Authorization Group' list as used by material master data.
OR in SPRO, anywhere could i find 'Define authorization group' for material master data specific??
Thanks.Hi
Authorization group in the material master are maintained at the material type level.
SPRO->IMG-> Logistics - General-> Material Master-> Basic Settings-> Material Types-> Define Attributes of Material Types
List of authorization roups can be found in table T134-Material Types
this filed is a free defined 4 charcter field.
Thanks & Regards
Kishore
Maybe you are looking for
-
A lot of times when I use aura (I'd say about 90%) I get an error saying that it couldn't connect to the AUR, because of error '443'. I Googled a bit, and a lot of people who had this issue simply weren't able to connect to the safe https://aur.archl
-
Problem with " Account assignment category"- Services
Hello expert, I have a problem with the order positions type " D" (Services). At the moment that I indicate that value in the field " Item category in purchasing document" , the field " Account assignment category" he becomes gray, preventing that ca
-
IDCS3 How to convert checkbox into form button in PDF?
I have an InDesign CS3 document that has lots of text checkboxes next to items in a list. I would like to be able to export this doc as PDF and have those checkboxes turned into form buttons that the reader can toggle on or off to indicate items that
-
Enable "linemode" on Cisco IOS device
Hi Experts, I would like to monitor some telnet traffic with a tcpdump/wireshark. As I know because of the mode between Telnet Client and Telnet Server these "double-characters" appears (when client type something): From Cisco device we can connect t
-
Mac Pro 2006 wont boot up, no video...
Hello... I have a Mac Pro 2006 and yesterday, it froze up and I had hold the power button down in order for it to turn on, since it was unresponsive... Upon trying to restart the Mac, it just hung at the white screen with the apple logo, and I realiz