Set for first time use
how do you use the ipad for the fisrt time? it doesnt go to the normal screen just shows to connect to itunes
You use the cable it comes with, connect it to a computer, and launch the latest version of iTunes.
Matt
Similar Messages
-
Computer keeps Configuring and setting up for first time use
I have a toshiba A505-S6980 that has been working fine for a couple years. Recently I had performance issues and suspected virus, spyware so I did a recovery with the original discs I made when I first got the computer. Four of the six discs reloaded fine. It did not ask for the last two discs "Environment 64 bit and Applications and Drives. I also have a System Repair disc. After loading the four recovery discs the computer now keeps recycling between preparing for first time use, configuring system, reboot and then back to preparing for first time use,etc. I think I'm close to getting this, but need a last bit of help.
ThanksIt's been a couple days since you posted this problem. Did you get anywhere, or are you still stuck in that loop? If it's still stuck, you may just want to perform the recovery again.
- Peter -
SQL Server Management Studio - Configuring the environment for first time use
Hi
I have recently switched my local 'My Documents' folder location to a network drive that I 'make available off line' to allow on-line/off-line work and synchronisation when I am working in and out of the office.
When I load my SQL Server Management Studio 2005 I frequently get 'Microsoft SQL Server Management Studio is configuring the environment for first time use'.
Management Studio them loads and I can continue without problem.
I am guessing it is trying to make reference to some settings file. Any ideas? I wonder if I can change/move these settings elsewhere to a local drive?
ThanksHi,
There is bug report of this issue:
http://connect.microsoft.com/SQLServer/feedback/details/126364/configuring-enviroment-for-the-first-time-every-time-in-ms-sql-server-management-express
"SQL Server Management Studio Express saves the settings for the user in ...\Documents and Settings\<User Profile>\Local Settings\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
and in ...\Documents and Settings\<user profile>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
if any of these files are not available or unusable, SSMSE will generate new ones."
Hope this helps.
BR,
JoukoK -
X230 - Setup Is Preparing Your Computer For First Time Use
Dear all,
I just received my X230 bought on Ebay and as I first turned on the computer, Windows was frozen and showed "Setup Is Preparing Your Computer For First Time Use" for hours (I guess its a whole day). Since I do not have any recovery media provided, does anyone has alternative solution?
Thanks in advance!Thanks! It took me a whole day to figure out what happened and I ended up format the whole drive and reinstall the windows. Yes, you are right, X230 is a good machine and acutally I was thinking to puchase X240 since there is kind of back to school program that you can purchase X240 at a deep discount price. After so many bad comments I chose X230 instead for:
1. Physical Trackpad button (which is extremely important as I ONLY use trackpoint)
2. 2 ram slots
3. normal voltage CPU
I am surfing the net with X230 and I am so happy I bought this. -
Need to reset security q/a, don't remember the answer. Need for App store first time purchase on ipad2.
Alternatives for Help Resetting Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
How to Manage your Apple ID: Manage My Apple ID -
I need help. I have an Iphone 3GS and so does my teenage daughter. I had not ever updated her until last night and I updated it using my Apple account. I did not think that I needed to make a separate account for her phone as the phone belongs to me and we share apps and such.
The update went well except all of her contacts were deleted. However, all of my phone's contacts were placed on her phone instead of her own. This was not a real problem for her as she did not have a great deal of contacts. But she did need to start delating mine from her phone. It was not until she had deleted all the way down to the H contacts that we realized as she deleted contacts from her phone, they were also delteing from mine!
I need help in retreiving all the contacts that she has deleted. There are important business contacts that I so did not want to lose!
What can be done? And how do we keep this from continueing to happen?This information will explain it:
http://support.apple.com/kb/HT1495
Hope this helps -
OS is Windows Vista Home Premium. Any help would be greatly appreciated.
CS5 is not for sale any longer if you are looking to purchase it, at least not thru Adobe.
CS6 is still being sold. I run CS6 on a Vista system without any issues. You might try downloading the trial version and see if it works for you.
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html -
Problem|Install iTunes problem! help for first time using iPod touch (2G)
Look i try to install the iTunes, but after press the install button, its write:
"The installer ecountered errors before iTunes could be configured.
Your system has not been modifited. To retry these operations at a later time, please run the installer again."
What to do? ****!250 Dollar on this iPod, not for free! i must have it working.
Please help me =]Have you seen this iPod 101 tutorial? You might want to bookmark it.
http://www.apple.com/support/ipod/howto/ -
Qosmio F60 - Each time it starts up, says it is first-time use
My notebook has just come back from being repaired (they replaced the hard-drive). Now every time I turn it on or it restarts, it says that Windows is configuring the computer for first-time use. Once on, the control panel pops up with 'How to customise your computer'. Plus, a small window pops up with "System Preparation Tool 3.14" and even if I click OK, it doesn't work.
Otherwise my computer works normally.
How do I stop my notebook from thinking it's starting for the first time?Hi buddy,
> a small window pops up with "System Preparation Tool 3.14" and even if I click OK, it doesn't work.
And what happens if you dont click on this tool?
Maybe the notebook was reinstalled from authorized service provider and so the installation must be finished.
Otherwise I would recommend reinstalling Windows from Toshiba recovery disk again. Maybe something went wrong during installation and so it would be necessary to reinstall Windows again.
Check this!!! -
help. tried for first time to use FaceTime with another iPhone user & call refused to connect. Call would dial, allow us to accept call, then error message "FaceTime failed" would appear & call disconnect. we are both on wi-fi networks, both phones have updated software & both enabled FaceTime with iTunes logged in. don't know what else to do to get FaceTime to connect. Someone please help.
Thanks Helen for the response. At least you can get some of the contacts to work. Absolutely none of mine will. Feel like my phone is cheating me out something it should do. Think I'm going to just have to dump all the Apple products in general because this phone hasn't worked right since I got it.
-
i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard driveWelcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org -
Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detectedI was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
HT1178 I'm setting up airport for first time. I'm getting error no DNS servers help
I'm setting up airport for first time. Getting error no DNS servers. What is DNS server and how do I fix this?
DNS server is that translation from a website address in words meaningful to us.. eg www.google.com to an actual number that computers can use. Without DNS the internet may work but you would have to know the ipv4 address of every site you want to visit.
Whenever you don't know the meaning of a term just type wiki plus the term in google search.
http://en.wikipedia.org/wiki/Domain_Name_System
We cannot really help fix the problem without knowing a good deal more info.
So
What modem do you have.. make and model may be a help?
Who is your ISP.. may be helpful??
Is the modem also a router?
How is the TC connected to the modem?
How is the computer connected to the TC?
A primary example of where you get this problem is a pure cable modem.. ie has no router in it.
When you replace an existing computer or router that is plugged into it, with the TC, requires that you power cycle the modem. In some cases the off time is 5min.. for a lot of services, it needs to be off 20min.. and for some even longer.. maybe an hour or overnight.
But it is not worth getting into specifics without knowing the rest of the system. -
Performance issue in browsing SSAS cube using Excel for first time after cube refresh
Hello Group Members,
This is a continuation of my earlier blog question -
https://social.msdn.microsoft.com/Forums/en-US/a1e424a2-f102-4165-a597-f464cf03ebb5/cache-and-performance-issue-in-browsing-ssas-cube-using-excel-for-first-time?forum=sqlanalysisservices
As that thread is marked as answer, but my issue is not resolved, I am creating a new thread.
I am facing a cache and performance issue for the first time when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users system (8 GB RAM but around
4GB available RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cube DB - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after daily cube
refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (32 GB RAM, around 4GB available RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
As mentioned in my previous thread, we have already implemented a cube wraming cache. But, there is no improvement.
Currently, the cumulative size of the all 4 cube DB are more than 9 GB in Production and each cube DB having 4 individual cubes in average with highest cube DB size is 3.5 GB. Now, the question is how excel works with SSAS cube after
daily cube refresh?
Is it Excel creates a cache of the schema and data after each time cube is refreshed and in doing so it need to download the cube schema in Excel's memory? Now to download the the schema and data of each cube database from server to client, it will take
a significant time based on the bandwidth of the network and connection.
Is it anyway dependent to client system RAM ? Today the bigest cube DB size is 3.5 GB, tomorrow it will be 5-6 GB. Now, though client system RAM is 8 GB, the available or free RAM would be around 4 GB. So, what will happen then ?
Best Regards, Arka Mitra.Could you run the following two DMV queries filling in the name of the cube you're connecting to. Then please post back the row count returned from each of them (by copying them into Excel and counting the rows).
I want to see if this is an issue I've run across before with thousands of dimension attributes and MDSCHEMA_CUBES performance.
select [HIERARCHY_UNIQUE_NAME]
from $system.mdschema_hierarchies
where CUBE_NAME = 'YourCubeName'
select [LEVEL_UNIQUE_NAME]
from $system.mdschema_levels
where CUBE_NAME = 'YourCubeName'
Also, what version of Analysis Services is it? If you connect Object Explorer in Management Studio to SSAS, what's the exact version number it says on the top server node?
http://artisconsulting.com/Blogs/GregGalloway -
using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV -
any advice?3GB for a movie? That's almost equivalent to an original DVD.
Have you checked in the Recently Added playlist?
I think this is possibly linear. Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't. I can't say why; I don't have any video that anywhere approaches 3GB in size. If that's how iTunes behaves I don't see you have too many options. You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor.
Maybe you are looking for
-
This has happened multiple times. While typing email and also in forums. This is a new computer with Windows 7 so not sure if problem is something in Windows or with Firefox. Sometimes when I hit Shift and t a new tab will open, or shift and w will c
-
Imposible to activate Infocube
Hi All, I have a problem to activate an infocube. I added a new Key Figure and when I try to activate the cube a message appear "Object ZCRM_C04 could not be activated". I have tried to activate it thru the program RSDG_CUBE_ACTIVATE also and the sam
-
Transformationstep and error handling
Hello, SAP library says: Transformationstep -> exception exists for system error -> generated for permanent system error. My idea was: If I have an error in a mapping embedded in a transofrmation step, this should generate a system error which I can
-
Paging via SNPP (or other method) from a PDF document
I have created a form that a user fills in. This form then compiles this data into a condensed formatted message to be sent to an alpha numeric pager. Right now the user has to copy the formatted text and past it into another program to sent the mess
-
I Have Creative Cloud Student and Teacher edition, but all trial version shown in creative cloud.