Set high SMTP port number on e61?

Hi,
I am unable to set my SMTP port number to a 4 digit number
on my e61 - it only accepts 3 digit port number ;-(
Any ideas or workaround to this bug?
Running latest firmware and everything on it...
/ Jens

Hello braingearssw,
Thanks for using Apple Support Communities.
If you would like to edit your Mail settings, please enter your email address where prompted to in the following link and then go through the directions to edit your settings:
Apple - Support - Mail Setup Assistant
http://www.apple.com/support/macosx/mailassistant/
Take care,
Alex H.

Similar Messages

SMTP Port Number

Forgive me if this is a dumb question, but is there a way to change the SMTP port number through terminal?
Right now I know mine is set to 25 and I would love to change it to 587.
Is this possible?
Any help is greatly appreciated!
Thank you in advance!

Hello braingearssw,
Thanks for using Apple Support Communities.
If you would like to edit your Mail settings, please enter your email address where prompted to in the following link and then go through the directions to edit your settings:
Apple - Support - Mail Setup Assistant
http://www.apple.com/support/macosx/mailassistant/
Take care,
Alex H.

Four digit smtp port number not being accepted in ...

I have my email id with pop3 port number as 110 and smtp port number as 2525. I have this same configuration in microsoft outlook and it works. IN nokia e61i, i am not able to enter the four digit smtp port number. It only accepts till three digits i.e. 252. Please help in configuring my email on nokia e61i. thnx.

Merrien40105227 to confirm you are utilizing the installation files available at https://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html?

SMTP port number resets to 25 after every reboot

Because of our ISP, we have to use a non-standard SMTP port number to send via our mail server. This works just fine when I change the SMTP port in the Mail program. However, every time I reboot my MacBook, the port is reset back to 25, and I have to manually go in and change the port number again. This is of course really annoying. Does anyone have a fix for this problem, and has anyone else experienced it? Thanks for any help!

No, you wouldn't see any error messages, because as far as the system knows, it is saving those changes. But if the file is corrupt, those changes don't stick when you quit Mail, so it reverts to the default.
Since you have a POP account, quit Mail, remove the com.apple.mail.plist file from Home/Library/Preferences, then restart Mail and setup the account(s) again and Mail will find and "import" the existing email folders. Then setup your SMTP port preferences again, quit Mail and restart to see if they stick. If they do, you can delete the old com.apple.mail.plist file.

How to view and change SMTP port number in new account setup in "Mail" 10.6

When I try to set up and test a new email account addressing an SMTP server that seems to e using a nn-standard port number, how on earth can I even look at the port number assigned by default to a new account in Apple Mail 10.6 setup ?
I might have to trial and error different port numbers but when Mail tries to test the connection to the SMTP server after I enter its address, it just spins and hangs up. I suspect the reason is a wrong port number. How do I change that outgoing port number in Apple Mail ??
There seems to be no obvious way the program will let U do it or even let you view the port it assigns in apparent error.

there is no way to change the smtp port during the original account creation. you can usually wait Mail out if it's spinning its wheels at this point. I've had to wait about 15-20 minutes a few times. eventually Mail lets you through even if it fails to connect to the smtp server. then, once the account is created you can edit the smtp server and try a few different ports and settings. that's done in system preferences->accounts. click on teh smtp server at the bottom and select 'edit smtp server list". then in the popup click "advanced".

Email SMTP Port Number

Hi,
When im testing my application for atg store, on order placing a mail is sent to my test mail Id.
The test mail Id is provided by organization does not have a port number details mentioned due to which im getting below error:
SOURCE EXCEPTION:
atg.service.email.EmailException: javax.mail.MessagingException: Could not connect to SMTP host: localhost, port: 25;
nested exception is:
java.net.ConnectException: Connection refused: connect
at atg.service.email.SMTPEmailSender.openConnection(SMTPEmailSender.java:762)
at atg.userprofiling.email.TemplateEmailSender.doSendEmailMessage(TemplateEmailSender.java:2164)
at atg.userprofiling.email.TemplateEmailSender.doSendEmailMessage(TemplateEmailSender.java:1953)
at atg.userprofiling.email.EmailRequestThread.run(EmailRequestThread.java:108)
Is there any way by which i can eliminate giving the port number OR Is the Port number mandatory?
Please provide a solution for the same.

Check the configuration of /atg/dynamo/service/SMTPEmail component and specify proper values for emailHandlerHostName, emailHandlerPort, username, password. By default emailHandlerHostName is configured to localhost and port is set to 25 which is default for SMTP. If you do not know these you can get these details from your mail administrator who has setup your mail-id. You would also need to specify the username and password if your administrator has not allowed for making anonymous connection to the mail server.

Status Agent Not Reachable - How to set a fix port number?

My EM 10g was working fine http://localhost:5500/em
Now when I tried, it was not working. I looked into portlist and found out it there was additional port of 5502
But when I logged into port 5502, Status Agent Not Reachable. Other links were working fine.
I had even installed another DB called REPOS other than the default ORCL.
All the services were up and running and I was just bouncing services back and forth and luckly I got the original port 5500 to work and then I did not got the error "Status Agent Not Reachable".
So I just wanted to know how to set a dedicated port in case the port number changes back to 5502 and if I get the error again.
Thanks in advance.

Yes I installed multipe databases for eg ORCL was the default but I installed REPOS.
I did not uninstall the db.
Why does it show two different ports for ORCL 5500 and 5502 and for Repos it shows two ports but they are the same 5501.
Everything is on my local machine.
Following is from the portlist
Ultra Search HTTP port number =5620
Enterprise Manager Agent Port =
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (orcl) = 5500
Enterprise Manager Agent Port (orcl) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831
Enterprise Manager Console HTTP Port (ORCL) = 5502
Enterprise Manager Agent Port (ORCL) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831

Change the SMTP Port number in OIM

Hi All,
I have an email server that its SMTP port is 135.
My question is:
How can I change the SMTP Port from 25 to 135 in OIM? Because the notificacions are sent by Port number 25
Thanks & Regards,
Ariel

I actually don't have any other ideas on where this could be configured. I think that the port can be changed if you send emails programmatically but if you use the default OIM email system I don't know any other place where this could be configured.
Have you tried opening an SR with Oracle?
Best regards
/Martin

How do I set outgoing smtp port for mail program ?

How do I set a port for the outgoing mail server (smtp)? If you go to
SETTINGS \ <email account> \ ADVANCED
you can only associate a port with the INCOMING SETTINGS. I need to associate a port with the Outgoing Server. How do I do this?

Tap on the outgoing smtp server under Settings>Mail,Contacts, Calendars and your email account. You will then see the advanced settings for the outgoing smtp server.

Multiple SMTP ports on one GWIA??

We currently are running SMTP on port 25 in GWIA and I have no intention of changing that, for obvious reasons. However, one of the big residential network providers in the area (AT&T/Bellsouth) has a policy of blocking traffic to port 25 on their network to anything but their own server, at least for residential accounts. Due to some of what I'll call legacy issues, we have a good number of users who are just using POP3/IMAP and want to be able to check their mail from home.
What I'd really like to do is to make another SMTP port available, say 26, which would get around Bellsouth's block. (I know that should work; I also have Bellsouth at home and use port 26 with another domain provider that I use personally.) In the GWIA properties on GroupWise > Network Address, however, it looks like I can only set one SMTP port. In this case, it would even work if the second port required SSL, but while separate ports seem to be available for POP, IMAP and LDAP they aren't available for SMTP. I've been telling users to just use the GWWA we have set up, but some of the big shots in the company want to use browsers on tablets that don't like the GWWA, so it'd be really nice if I could just get them to work with SMTP even when they're at home and on Bellsouth.
Any suggestions for how I can get GWIA to listen for SMTP on two ports, 25 and some other port, whether or not that other port requires SSL or not? Is there some manual config file I can override the default ConsoleOne settings with? If there are any recommended tricks I'd love to hear 'em... thanks in advance!
topher

In short, you can't - it is an enhancement request that I and others
have had for some time...
On the other hand if you create a second GWIA, change that so that it
listens on 587 (SMTP Submission Port) with SSL Required and then have
it relay out via your other GWIA you will achieve what you want.
However, please PLEASE ensure that the POP, IMAP and SMTP all have the
SSL set to required so that your users do not send user names and
passwords in clear
Thanks
On Wed, 30 Nov 2011 18:06:01 GMT, toforama
<[email protected]> wrote:
>
>We currently are running SMTP on port 25 in GWIA and I have no intention
>of changing that, for obvious reasons. However, one of the big
>residential network providers in the area (AT&T/Bellsouth) has a policy
>of blocking traffic to port 25 on their network to anything but their
>own server, at least for residential accounts. Due to some of what I'll
>call legacy issues, we have a good number of users who are just using
>POP3/IMAP and want to be able to check their mail from home.
>
>What I'd really like to do is to make another SMTP port available, say
>26, which would get around Bellsouth's block. (I know that should work;
>I also have Bellsouth at home and use port 26 with another domain
>provider that I use personally.) In the GWIA properties on GroupWise >
>Network Address, however, it looks like I can only set one SMTP port.
>In this case, it would even work if the second port required SSL, but
>while separate ports seem to be available for POP, IMAP and LDAP they
>aren't available for SMTP. I've been telling users to just use the GWWA
>we have set up, but some of the big shots in the company want to use
>browsers on tablets that don't like the GWWA, so it'd be really nice if
>I could just get them to work with SMTP even when they're at home and on
>Bellsouth.
>
>Any suggestions for how I can get GWIA to listen for SMTP on two ports,
>25 and some other port, whether or not that other port requires SSL or
>not? Is there some manual config file I can override the default
>ConsoleOne settings with? If there are any recommended tricks I'd love
>to hear 'em... thanks in advance!
>
>topher

E61 SMTP Port problem

I have a E61 since a few days. Unfortunately I cannot configure the SMTP port. Here in the office the port is 2525, but obviously it is only possible to enter 3-digit-numbers in the profile.
Is there a workaround? The confuguration tool is of no use as well...

Hi,
the only way is to use change the smtp port to 3 digits.I don't know but it can be possible to add a second port number without to remove the port with 3 digits.
I hope it will be help.I have read in the discussion the same problem.Thats was the solution provided.
Best regrds,
Cengiz Kuskaya
ckuskaya

I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying. It would appear to be a problem with outgoing server and I have changed the port number but with no success.

I have just purchased an i pad 2 and am having trouble with the e-mail set up. Set up with wi-fi, i-cloud etc has worked fine but the i pad is recognising my outlook 2007 account details but is not verifying it. The trouble appears to be with the outgoing server and I have tried changing the port number, but to no avail! Also reset the account settings for holding messages on the server...help! As you can tell I'm not very techy and I'm desperate to get the bloody thing working as I'm going away on Tuesday! Any suggestions?

I had a similar issue and it was password case sensitive issue

Is it possible to set a port number for a server as a value from env ?

Hello,
I'm using the version 6.1 - sp8 and I'd like to set the port number of a server as a value returned by an environment variable. Will this be achievable somehow through the admin console?
In fact, I have an environment variable called '$WEB_SERV_PORT'. I'd need this value to be assigned as the port number for a server. The reason why I am trying to do this is coz I have multiple instances running as different batch accounts and each batch account would be having its own '$WEB_SERV_PORT' which would be the port on which iplanet would be running for that batch account.
I'd appreciate if anyone could help.
Thank you,
Presley.

Hello Sriram,
Thanks for the info that you have provided. I do agree that what you said would be a better approach.
However I've got a couple of questions on the approach that you have suggested (Sorry that its a bit off from the main topic). Just wanted to clarify if what I thought is in sync with the approach that you suggested.
1. As you said, I could setup multiple virtual server within an instance (https-<hostname>) - Does this mean that I am creating "Virtual Server Classes" for each server and through the web-applications tab, assigning the corresponding war file to each Virtual Server Class?
2. Another approach that came upto my mind is that I could create different instances like (https-virtual server1, https-virtual server2, https-virtual server3 etc..). I am assuming that if I follow this approach, I could have each server allocate memory indiviually to the virtual servers. for eg, I could allocate
1024 MB to each virtual server where as in the first approach, I would have to make the 1024 MB to share between all the Virtual Server Classes. And also, in the case theres an issue with one server, I could handle the start/ stop etc individually, where as in the 1st approach, all the virtual classes would be affected by the start/stop. Am I assuming it correctly ?
I'd appreciate if you could let me know.
Thank you,
Presley.
Edited by: pressley on Mar 26, 2008 7:04 AM

Setting up different webservices based on port number

I have several different web services set up on different port numbers, but would like to access them based on the sub domain instead of the port number.
for instance we have Rumpus ftp running on port 8000
webmail running on port 82
wiki running on port 80
at the moment they are accessed by our.domain-name.co.uk:port number
I have the following sub domains set up with our domain registrar which point to our server.
ftp
web
mail
how do I tie all this together so just typing ftp.domain-name.co.uk points to rumpus on port 8000

Short answer, double-up.
The port number will take precedence, so if you have a virtual host listening on port 8000 then it's only going to process requests on that port. There's no way for it to process hits that come in on a different port.
You could configure the port 80 virtual host as a proxy to proxy the connection to the port 82/8000 server based on the hostname, but it would be easier (by far) to just setup another virtual host.
For example, you setup:
*:82 -> wiki
then you setup another virtual host:
web.domain-name.co.uk:80 -> wiki
Likewise you setup:
*:82 - > webmail
and
mail.domain-name.co.uk:80 -> webmail
In both cases you'd need to duplicate the site's configuration, which means more administration - if you make a change to your webmail setup you need to make it in both places.
The one gotcha is that IIRC Rumpus runs as its own server, not an Apache virtual host, so that may need to be setup as a proxy.

How do I set up a POP mail account to use a different outgoing SMTP port?

How do I set up a POP mail account to use a different outgoing SMTP port? on Maverick O/Sx. Cannot see option to use 2 different ports?

In Mail>Preferences>Accounts tab>Account Information tab - from the 'Outgoing Mail Server (SMTP):' drop-down menu select 'Edit SMTP Server List...', choose the server you want to edit from those listed, click on the Advanced tab. Does that give you the option you're after?

Set high SMTP port number on e61?

Similar Messages

Maybe you are looking for