Set horizontal length for Bridge display?

As a new Bridge user, I'm finding the program potentially useful but a bit frustrating.
When I view a file of pictures in Bridge, I'm finding that the number of pictures I can view entirely depends on the scale that I specify in the bottom slider. The pictures that Bridge doesn't have room to show simply dissapear off to the right hand side of the window.
The only "solution" that I've been able to find is to reduce the scale of the pictures shown on the viewing screen down to such a tiny size that I can no longer see the picture (or sometimes even the entire file name).
What I'd like to do is set some sort of a finite length for Bridge's effective viewing screen, and have the program move the pictures that don't fit at top down to the next row below. Is there some way to do this?

This is not normal, but have seen posts on this before. My memory is dim so can not remember what the fix was.
Things to check - is monitor set to native resouliton?
Do you have it set up for a 2 monitor views even though you only have one screen?

Similar Messages

  • Setting different resolutions for different displays?, setting different resolutions for different displays?

    Hi,
    I have a 30" dell display that I have used with my MBP. I recently got a MBA and installed mountain lion.  One of the things they inexplicably removed was the ability in the menu bar to set different resolutions for different displays. The only way I can get my Dell Monitor to work is to use mirroring. But I don't want mirroring. I want two separate displays.  In Snow Leopard, the drop down display menu in the menu bar allowed you to pick different resolutions for different displays. Is there any possible way to do that in Mountain Lion?
    Tom

    Yes, assuming that the 8" display has a resolution that the Mac can support. When you open the Displays system preference, you'll get a settings window on each display (as long as the option for Mirroring isn't checked).
    Regards.

  • How to set max length for TextField ?

    how do i go about setting a max length for a TextField in jdk1.1.8 ?
    a while back there was a topic on this but it was for jdk1.0
    please help

    well if it works in 1.0 it will most likely also work in 1.1.8 if it is depricated you can use the -deprication option during compilation to see what is derpricated and what method i advised to use now.
    there may however be an easyer way in 1.1.8 but i don't know that.
    hope this helps you,
    Robert

  • Setting specific length for a line

    I'm looking for a way to enter an exact length for a line. Also, exact dimensions for a rectangle.
    I'm assuming there's a 'Properties' window or something that has the shape's properties, but I'm not seeing anything. I've searched the help site, but not seeing anything there either.
    Any assistance would be greatly appreciated.
    doug

    Look for the little downturned arrow in the tool options bar for more options for the different shape tools.
    I don't know that you can set a fixed length for the Line Tool, but could use the rectangle tool for a fixed line length.

  • Set internal length for field without reference in FM REUSE_ALV_GRID_DISPLA

    Hi Abapers,
    Currently I use FM REUSE_ALV_GRID_DISPLAYfor my report. The problem is, my internal table contain some field which have no reference to any data dictionary.
    This part of my code when set that kind of field:
       z_field_cat-ref_tabname = ''.
       z_field_cat-ref_fieldname = ''.
    z_field_cat-tabname = 'T_OUT_FINAL'.
        z_field_cat-fieldname = 'ARKTX'.
        z_field_cat-col_pos = z_colpos.
        z_field_cat-hotspot = 'X'.
        z_field_cat-outputlen = '200'.
        z_field_cat-seltext_m = 'Comments'.
        z_field_cat-ddictxt = 'M'.
    *{   INSERT         SRPK900238                                        1
        z_field_cat- = 'char'.
        z_field_cat-ddic_outputlen = '5'.
        z_field_cat-intlen = '5'.

    Sorry, I'm just not finish typing when accidently push "Post Message".
    This the full question of mine.
    Currently I use FM REUSE_ALV_GRID_DISPLAYfor my report. The problem is, my internal table contain some field which have no reference to any data dictionary.
    This part of my code when set that kind of field T_OUT-ARKTX into t_field_cat.
        z_field_cat-ref_tabname = ' '.
        z_field_cat-ref_fieldname = ' '.
        z_field_cat-tabname = 'T_OUT'.
        z_field_cat-fieldname = 'ARKTX'.
        z_field_cat-col_pos = 5.
        z_field_cat-hotspot = 'X'.
        z_field_cat-outputlen = '200'.
        z_field_cat-seltext_m = 'Comments'.
        z_field_cat-ddictxt = 'M'.
        APPEND z_field_cat TO t_field_cat.
    t_field_cat will be exported in FM 'REUSE_ALV_GRID_DISPLAY'
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            i_callback_program                           = z_repid
            i_callback_html_top_of_page             = 'ALV_TOP_PAGE'
            it_fieldcat                                         = t_field_cat
            i_save                                              = 'A'
          TABLES
            t_outtab                                           = t_out_final
          EXCEPTIONS
            program_error                                   = 1
    In internal table T_OUT, ARKTX length = 200. But somehow when it is displayed in ALV, it just show 128 characters.
    I have tried some parameter in t_field_cat to set length to be 200. I used intlen. But it doesn't work.
    Do any of you have any idea to solve this problem?
    Thank you
    Regards
    Hadi

  • Setting different resolution for two displays

    Before I buy a Mac Mini I was wondering if I can connect two separate displays, one a 15" with XGA and the other a 8" with VGA. This is for an installation aboard a sailboat so I'm not looking to run HD, (not now anyway). I looked at the "System Preferences" on my MacBook to see what was available under "Display" and could not see where I can set up two displays with very different settings.
    Is there a way to setup each display individually for simultaneous use? Thank you.

    Yes, assuming that the 8" display has a resolution that the Mac can support. When you open the Displays system preference, you'll get a settings window on each display (as long as the option for Mirroring isn't checked).
    Regards.

  • Set max length for input parameter in SSRS

    I have an input parameter (@year)   to display a simple report. This input parameter taken Year from user (ex: 2015) manually. Here my problem is to restrict the user to max length of
    4. It should allow only (ex:2015) not (ex:20155) like that. Can any one please suggest me how to do this. 

    Hi SaikumarN,
    According to your description, you want to restrict the length of values which user type in the parameter box.
    In Reporting Services, it’s not supported to limit the length of the typed value in the parameter box currently. For your requirement, you could provide Microsoft a feature request at
    https://connect.microsoft.com/SQLServer, so that we can try to modify and expand the product features based on your needs.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • How to set maximum length for TextEdit

    Hi all,
        I have a TextEdit UI element in my webdynpro page and I want to set the maximum number of characters that can be entered in this TextEdit. How can I do this?
    Thanks,
    Satyajit.

    Hi Arun,
         thanks for the reply. But I also want to use the same scenario for an Inputfield. Now I used the same method here and when viewed in the browser, the entire InputField has been stretched. How can I keep the view of the InputField as default but still have a restriction on the number of characters that can be entered in this InputField? It works for TextEdit.
    Thanks,
    Satyajit.

  • HT1752 Where can i find a replacement set of cables for cinema display 23 inch early 2007. I will solder them.

    I have an old vintage cinema display and would like to replace the power supply and the set of cables in the back (early 2007). Where can I found it?

    Hi-
    You say missing? How about cut....... The cable coming from the back of the ACD isn't removable. Your "deal" needs to go to an Apple service center. You can also get a power brick there.
    G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

  • Extending DVI cable length for 30" display

    With my new home office setup the computer will sit 25ft from the 30" Cinema display, so what are my options connecting this beast?
    +
    DVI Coupler (Female to Female) and DVI Male Digital/DVI Male Digital Dual Link (24AWG) Cable - 25FT
    Would that work? Or maybe switch to an HDMI solution with DVI to HDMI adapters?
    Thanks!

    A 10 ft. dual-link DVI extension should work, depending on the quality of the cable. Try to find a M-F cable, so you won't need a gender changer. You want to have the minimum number of connections.

  • Set maximum length for JFormettedtextfield

    Hi,
    how can restrict user to fill only 10 characters in JFormettedtextfield .
    thanks in advance

    Hi camickr,
    thanks for the hint................
    i had written the following code for that................is this ok.
    Here i want to allow user to enter characters other than alpha and number.
    javax.swing.text.MaskFormatter formatter;
              try {
                   formatter = new javax.swing.text.MaskFormatter("*");
                   formatter.setInvalidCharacters("0123456789ABCDEFGHHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz");
                   flat_file_delimiterFormattedTextField = new javax.swing.JFormattedTextField(formatter);
              } catch (ParseException e) {
                   // TODO Auto-generated catch block
                   javax.swing.JOptionPane.showMessageDialog(null,"Bad Format :","Error",javax.swing.JOptionPane.ERROR_MESSAGE);
                   //e.printStackTrace();
              }

  • Option Profile setting in OPA3 for CM01 display

    Hi,
    In CM01 does it display till 6 months only, Since I am changing number of days to more than 180 in OPA3 fro option profile but it is always showing till 180 days only and in past it is going to 30 days, is this standard SAP or is it possible to display more than 180 days? Suggest me,

    Create the selection profile and specify the period (OPA2).
    Create the option profile and specify the period (OPA3).
    Create the overall profile to link selection and option profile together (OPA6).
    In CM01, you can change the overall profile in menu path Planning -> Profile -> Overall profile.
    You can default the overall profile in user parameter CY1.

  • WHEN-MOUSE-CLICK for a display item does not fire on the web

    Resending as there were no responses............
    Regards,Bala.
    Bala (guest) wrote:
    : Hi guys,: 1. Does WHEN-MOUSE-CLICK fire on Display Item or on
    a Button in
    : Web Forms (not in a client/Server environment) ? We had it
    : working in Forms 5.0, but right now in 6.0 it doesnt ? In 6.0,
    : it works fine in Client/Server environment, but definitely not
    : in Web environment.
    : 2. Again, in our app. we have set no bevel for the display
    : items, but when we run it on the web, it comes with a bevel
    : (this does not happen in Client/Server). Is this common or is
    it
    : a known bug in 6.0 ?
    : 3. How to change Fonts for Web Deployment. Currently I guess
    it
    : takes Dialog as the default with the point size of 900 (in
    Java
    : terms). I tried modifying the registry.dat to the following:
    : default.fontMap.defaultFontname=SansSerif:
    default.fontMap.defaultSize=900: OR
    : default.fontMap.defaultFontname=Ms Sans Serif:
    default.fontMap.defaultSize=900
    : and found no changes at runtime on the Web.
    : Any help on these issues, will really be appreciated.
    : Thanks,
    : Bala
    null

    Dear friend
    i have the same problem when ever u can solve this probelm pls
    inform me as well mean while i am trying to reslove it as well if
    there is any sucess i ll inform u.
    mobeen
    Bala (guest) wrote:
    : Resending as there were no responses............
    : Regards,Bala.
    : Bala (guest) wrote:
    : : Hi guys,: 1. Does WHEN-MOUSE-CLICK fire on Display Item or on
    : a Button in
    : : Web Forms (not in a client/Server environment) ? We had it
    : : working in Forms 5.0, but right now in 6.0 it doesnt ? In
    6.0,
    : : it works fine in Client/Server environment, but definitely
    not
    : : in Web environment.
    : : 2. Again, in our app. we have set no bevel for the display
    : : items, but when we run it on the web, it comes with a bevel
    : : (this does not happen in Client/Server). Is this common or is
    : it
    : : a known bug in 6.0 ?
    : : 3. How to change Fonts for Web Deployment. Currently I guess
    : it
    : : takes Dialog as the default with the point size of 900 (in
    : Java
    : : terms). I tried modifying the registry.dat to the following:
    : : default.fontMap.defaultFontname=SansSerif:
    : default.fontMap.defaultSize=900: OR
    : : default.fontMap.defaultFontname=Ms Sans Serif:
    : default.fontMap.defaultSize=900
    : : and found no changes at runtime on the Web.
    : : Any help on these issues, will really be appreciated.
    : : Thanks,
    : : Bala
    null

  • Need help - Pre-defined length for JSpinner

    Hi,
    How do I set the length for JSpinner editor while constructing it self? As of now, we are trying to use the key listners to determine the length and restrict.
    Thanks,
    Raj

    Hi,
    you can use method setMaximum of SpinnerNumberModel, see
    SpinnerNumberModel API docs
    http://java.sun.com/j2se/1.4.1/docs/api/javax/swing/SpinnerNumberModel.html
    JSpinner API docs
    http://java.sun.com/j2se/1.4.1/docs/api/javax/swing/JSpinner.html
    Ulrich

  • How do I set up an indicator to display for only 1 second?

    How do I set up an indicator to display for only 1 second?
    I am reading keys from a serial device and I turn on an indicator that corresponds to the key pressed
    on the serial device but how do I set this up so that it only stays lit (enabled) for a second or two?
    The indicator is inside of a case statement and turns on OK but I do not want it to stay on for more than
    a second or two. How do I modify this to display for only a second or two?
     (P.S. I am running an old version 8.2 and can only see vis that are 8.2 or older.)
    thanks

    Simplest way to turn the indicator off (false value) after a set time is to use a Sequence structure (flat or stacked).
    Frame 1, set to true,
    Frame 2, Wait ms (wire millisecond value to wait)
    Frame 3, set to false.
    This method, however, prevents the code outside the case structure from running during that wait time.  
    Something more elaborate will allow the external code to run.  What comes to mind is a shift register that holds the indicator name and the time stamp (in milliseconds) when it was turned on, in an array of clusters.  Each iteration of your loop will check this register to see if a certain time has passed (current time stamp minus turn on time).  If so, use a case structure to turn the indicator off and remove the elements from the shift register array (so you don't keep setting the indicator to false).  The array will let you control multiple indicators independently.
    A problem with this option could arise from multiple readings.  Lets say you want to turn it off after 2 seconds, but you read the value again after 1 second (this means the indicator should be on for a total of 3).  The code would still turn it off after the 2 second mark.  Of course this really depends on the time intervals involved with your code.

Maybe you are looking for