Set-HybridConfiguration showing error

Hello,
About my Environment:
Single Virtual Machine (VM) in Windows Azure with following ports enabled for public and private.
HTTPS
TCP
443
LDAP
TCP
389
PowerShell
TCP
5986
Remote Desktop
TCP
58142
SMTP
TCP
25
OS: Windows Server 2012 R2 (Domain Controller) with Exchange Server 2010 Sp3 installed on it.
Mail flow and Outlook Anywhere are working.
Task which is to be performed -
Set-HybridConfiguration using "Windows PowerShell" not from EMC.
Error -An Active Directory error 0x51 occurred when trying to check the suitability of server '-SecureMailCertificateThumprint
'. Error: 'Active directory response: The LDAP server is unavailable.'
    + CategoryInfo          : NotSpecified: (:) [Set-HybridConfiguration], SuitabilityDirectoryException
    + FullyQualifiedErrorId : 7C1936CA,Microsoft.Exchange.Management.SystemConfigurationTasks.SetHybridConfiguration
    + PSComputerName        : mail.domain.com
Thanks, Divyaprakash Koli

Hello Martina,
Using this Snap-in, we can run Exchange cmdlets in Windows PowerShell too.
Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010
But, if try the process from Exchange Management Shell, then also I get the same error.
And as I said, I have done this many times before from EMC in Azure VM only, so it supports. Just only thing is, this time I am trying the process from Commands.
Thanks, Divyaprakash Koli

Similar Messages

I have set up icloud tool and I try to log in but it always fail showing error "you can not sign in because of server error", what can I do?

I have set up icloud tool and I try to log in but it always fail showing error "you can not sign in because of server error", what can I do?

Hello, Sameh.tolba.
Thank you for visiting Apple Support Communities.
I would recommend going through the troubleshooting steps in the two articles below when experiencing this issue.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
iCloud: Making sure that iCloud works with security software in Windows
http://support.apple.com/kb/TS4175
Cheers,
Jason H.

HT204053 I have created a apple id but while signing in the setting it showing 403 error

I have created a apple id but while signing in the setting it showing 403 error

Purchase and Redeem an iTunes Gift Card.
How to Redeem a Code > http://support.apple.com/kb/ht1574

Addisctl.sh showing errors

Hi All,
Whenever i try to run the applications the addisctl.sh script takes a lot of time and also show errors after execution.
My Application version is : 11.5.9
Database Version is: 9.2.0.3
Os version is: RHEL 3
The script result is:
[applerpp@hertz applerpp]$start_applerpp
You are running adstrtal.sh version 115.9
Executing service control script:
/erpp/erppcomn/admin/scripts/ERPP_hertz/adapcctl.sh start
script returned:
adapcctl.sh version 115.32
Starting Apache Web Server Listener (dedicated HTTP) ...
Starting Apache Web Server Listener (dedicated PLSQL) ...
/erpp/erppora/iAS/Apache/Apache/bin/apachectl start: httpd started
adapcctl.sh: exiting with status 0
.end std out.
Executing service control script:
/erpp/erppcomn/admin/scripts/ERPP_hertz/adalnctl.sh start
script returned:
adalnctl.sh version
Checking for FNDFS executable.
Starting listener process APPS_ERPP.
adalnctl.sh: exiting with status 0
.end std out.
Executing service control script:
/erpp/erppcomn/admin/scripts/ERPP_hertz/adcmctl.sh start
script returned:
You are running adcmctl.sh version 115.16
Starting concurrent manager for ERPP ...
Starting ERPP_0801@ERPP Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
.end std out.
Executing service control script:
/erpp/erppcomn/admin/scripts/ERPP_hertz/adfrmctl.sh start
script returned:
You are running adfrmctl.sh version 115.26
Starting forms server for ERPP on port 9000.
adfrmctl.sh: exiting with status 0
.end std out.
Executing service control script:
/erpp/erppcomn/admin/scripts/ERPP_hertz/adrepctl.sh start
script returned:
You are running adrepctl.sh version 115.15
starting Reports Server for ERPP on port 7000.
adrepctl.sh: exiting with status 0
.end std out.
Executing service control script:
/erpp/erppcomn/admin/scripts/ERPP_hertz/adfmcctl.sh start
script returned:
You are running adfmcctl.sh version 115.15
Starting forms load balancing client for ERPP.
adfmcctl.sh: exiting with status 0
.end std out.
Executing service control script:
/erpp/erppcomn/admin/scripts/ERPP_hertz/adfmsctl.sh start
script returned:
You are running adfmsctl.sh version 115.11
starting forms metrics server for ERPP.
adfmsctl.sh: exiting with status 0
.end std out.
Executing service control script:
/erpp/erppcomn/admin/scripts/ERPP_hertz/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 115.7
Starting Fulfillment Server for ERPP on port 9300 ...
jtffmctl.sh: exiting with status 0
.end std out.
Executing service control script:
/erpp/erppcomn/admin/scripts/ERPP_hertz/addisctl.sh start
script returned:
ERROR : Timed out: Interrupted Exception
addisctl.sh version 115.8
/erpp/erppora/8.0.6/vbroker/bin/osagent
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /erpp/erppora/8.0.6/discwb4/util/oad.log.
Discoverer Locator Started.
Locator logs messages to the file /erpp/erppora/8.0.6/discwb4/util/locator.log.
Cannot bind to OAD. Re-starting...
OAD is stopped
Unable to stop Osagent. No process-id file found.
Locator is stopped
Unable to stop gatekeeper. No process-id file found.
No other discoverer processes running
/erpp/erppora/8.0.6/vbroker/bin/osagent
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /erpp/erppora/8.0.6/discwb4/util/oad.log.
Discoverer Locator Started.
Locator logs messages to the file /erpp/erppora/8.0.6/discwb4/util/locator.log.
Registering Discoverer Session
oadutil reg: Failed to bind to OAD
Registering the Collector
oadutil reg: Failed to bind to OAD
addisctl.sh version 115.8
/erpp/erppora/8.0.6/vbroker/bin/osagent
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /erpp/erppora/8.0.6/discwb4/util/oad.log.
Discoverer Locator Started.
Locator logs messages to the file /erpp/erppora/8.0.6/discwb4/util/locator.log.
Cannot bind to OAD. Re-starting...
OAD is stopped
Unable to stop Osagent. No process-id file found.
Locator is stopped
Unable to stop gatekeeper. No process-id file found.
No other discoverer processes running
/erpp/erppora/8.0.6/vbroker/bin/osagent
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /erpp/erppora/8.0.6/discwb4/util/oad.log.
Discoverer Locator Started.
Locator logs messages to the file /erpp/erppora/8.0.6/discwb4/util/locator.log.
Registering Discoverer Session
oadutil reg: Failed to bind to OAD
Registering the Collector
oadutil reg: Failed to bind to OAD
Command line may not be valid
Exiting with status 1
You have new mail in /var/spool/mail/applerpp
[applerpp@hertz applerpp]$

The LD_ASSUME_KERNEL is already set to the specified value and when i tried to run the addisctl script from the same session i got the same errors but when i run the checkdiscoverer.sh the ouput is:
[applerpp@hertz util]$checkdiscoverer.sh
Initializing ORB...
ORB initialized successfully.
Checking for OSAgent...
java.lang.Exception: OSAgent Not Found
Error: OSAgent is not running. Discoverer will not function correctly unless there is at least one OSAgent running in the subnet.
Hint: Start OSAgent by running startosagent.sh under /erpp/erppora/8.0.6/discwb4/util.
Checking for OAD...
org.omg.CORBA.NO_IMPLEMENT[completed=MAYBE, reason=
Could not locate the following object:
repository id : IDL:visigenic.com/Activation/OAD:1.0
host name : 127.0.0.1
Error: OAD is not running. Discoverer will not function correctly.
Hint: Start OAD by running startoad.sh under /erpp/erppora/8.0.6/discwb4/util.
Checking for Discoverer Locator...
org.omg.CORBA.NO_IMPLEMENT[completed=MAYBE]
Error: Discoverer Locator is not running. Clients outside the subnet will not be able to connect.
Hint: Start Discoverer Locator by running startlocator.sh under /erpp/erppora/8.0.6/discwb4/util.
Checking for Gatekeeper...
WARNING: Attempting to use HTTP Firewall Proxy Server
due to security restrictions: org.omg.CORBA.INTERNAL[completed=MAYBE, reason=Can not find GateKeeper: exception ReqFailure{}]
org.omg.CORBA.INTERNAL[completed=MAYBE, reason=Can not find GateKeeper: exception ReqFailure{}]
Error: Gatekeeper is not running. Clients outside the firewall will not be able to connect.
Hint: Start Gatekeeper by running startgatekeeper.sh under /erpp/erppora/8.0.6/discwb4/util.
Refer to the Discoverer Configuration Guide for more information on configuring Gatekeeper.
Checking that the machine has only one network card...
Yes.
Pls help me on this issue
Thanks and Regards
Amit Raghuvanshi

List view threshold showing error on Production but not on Dev

I have a library on Production containing 6000 items.
There is a web part which displays items from that library (all on one page) and it is showing error because the items exceeded 5000 limit.
The same web part on Dev is not showing error when I display 6000 records from that list on a single page.
List view threshold is set to 5000 on both Production and Dev.
Why both servers are showing different behaviors? Is there some other setting other than List view threshold different on Production than Dev?
Where do I look?

Hi Frank,
The number of items in a folder needs to be less or equal to the list view threshold.
If a list/library has 4000 items and a folder with 3000 items, both the folder view and the root folder view will
work for a list view threshold of 5000. However, if the folder or root folder grows to have more than 5000 items,
it will stop displaying items in the default view.
The easiest and quickest solution is to change the list view threshold for the period you migrate the site, then change it back to default. To do this follow the steps:
go to your SP2013 Farm's Central Administration
go to the "Manage Web Applications" under the "Application
Management" section
select the "Web Application" where you migrate the site
click the "General Settings" dropdown and select "Resources
Throttling"
change the "List View Threshold" to 12000 if your library has 11000 pages
migrate your site from SP2010 to SP2013
change the "List View Threshold" back to 5000.
SharePoint 2013 works the same as 2010 in terms of list view threshold: you can use folders and/orviews filtered on indexed columns to
access items in a list/library with more than 5000 of items.
When you try to add/delete an entire list/library that has more than 5000 items, then the operation fails. The solutions here are:
see what I've said at point 2. above
enable the "Daily Time Window for Large Queries" option located in the same place as the "List View Threshold".
This enables you to get around the "List View Threshold" during the time window you set, which could be sometime at 23:00 when nobody accesses SharePoint, for example. You can migrate your site during that time window.
Indul Hassan
Microsoft Community Contributor
http://www.indulhassan.com
You Snooze.. You Lose !!

Url iview showing error when displaying a page with frames

Hi,
I have a requirement of putting a site in a url iview in the portal. I created a url iview and when I preview it, it displays correctly. When I assign this to a role and access it through the navigation, it gives an error.
The weird thing is that, it works sometimes and it does not work sometimes. The url I am trying to display is working fine, because even when the portal shows error, if I try the url straight from the browser, it loads without any errors.
So what could be the problem? The site I am trying to display contains frames. Could this be the problem? If so, why is it working sometimes and does not work sometimes?
Thanks in advance.
Regards
Ranjith

Hi Martin,
The issue is still there. But one interesting thing that was noticed by my team mate was that if you add the site to the list of sites on browser which can use cookies, everything works fine. Similarly, if I reduce the privacy setting of my browser to Low, it works fine.
Again, even if you keep the privacy setting as Medium and does not allow the site to use cookies, the iview opens fine if you open it in a new window.
Any thoughts on this?
Thanks & Regards
Ranjith

Show error and test error

I have used oracle 9.2 for 3 months. I install oralce client 9.0 in my computer. when I write stored procedure. I used SQL Plus to compile. We use package to wrap a store proceure in sql file. we use ref cursor variable to reture record sets to client because we use oledb and ado to acecess oracle. I don't know the reason that my computer didn't worked well yesterday.
1. in sql plus, all variable changed to char when I made test in sql plus. I used following statement to test:
variable c ref cursor
exec package.procedure(:c, variable1);
print c
It has error messages: wrong type or numbers in the arguments in calling stored procedure. I checked variable, c changed to char not ref cursor. later, check others, all variable changed to char. very strange. If I defined variable like this: variable c char(20), wrong, like this: variable c char, correct, very strange.
2. when I compile(in SQL Plus), use statement: @package, If stored procedure has error, use show errors command to display error, cann't display the error. This is first time I met this kind of error.
In addition, If I connect to other database which is old database we don't use now in sql plus. everythings are ok. I hope somebody could give me reply.
Thanks.
My email: [email protected]
Jerry Mu

That would be because the PXI 5124 is a digitizer not a analog input device. You need to use the NI SCOPE driver not NI DAQmx
Jeff

Show errors and test error

I have used oracle 9.2 for 3 months. I install oralce client 9.0 in my computer. when I write stored procedure. I used SQL Plus to compile. We use package to wrap a store proceure in sql file. we use ref cursor variable to reture record sets to client because we use oledb and ado to acecess oracle. I don't know the reason that my computer didn't worked well yesterday.
1. in sql plus, all variable changed to char when I made test in sql plus. I used following statement to test:
variable c ref cursor
exec package.procedure(:c, variable1);
print c
It has error messages: wrong type or numbers in the arguments in calling stored procedure. I checked variable, c changed to char not ref cursor. later, check others, all variable changed to char. very strange. If I defined variable like this: variable c char(20), wrong, like this: variable c char, correct, very strange.
2. when I compile(in SQL Plus), use statement: @package, If stored procedure has error, use show errors command to display error, cann't display the error. This is first time I met this kind of error.
In addition, If I connect to other database which is old database we don't use now in sql plus. everythings are ok. I hope somebody could give me reply.
Thanks.
My email: [email protected]
Jerry Mu

Hi,
A very common cause for ORA-00942 in a stored procedure (here I'm including packages and functions) is that you have privileges only through a role. Roles don't count in stored procedures if they are compiled with the default "AUTHID DEFINER". Either
(1) have whatever privileges you need (e.g. "INSERT ON data_quality_report" or "SELECT ON s_org_ext") granted directly to you (the package owner), or to the pseudo-user PUBLIC, and not merely to some role that you have, or
(2) create the package in the same schema as the tables, or
(3) create the package with "invoker's rights", like this
CREATE OR REPLACE PACKAGE data_quality_report_p
AUTHID CURRENT_USER -- Added
AS
FUNCTION pull_data ...'AUTHID CURRENT_USER" goes right before the keyword "IS" (or "AS") in the package spec; you don't have to do anything to the package body.
However, if you do this, then whoever runs the package will need to have those privileges, in addition to EXECUTE privileges on the package. Privileges granted through a role will be okay.
Usually, (1) is the best solution. Have the table owner(s), or someone with the proper authority, grant privileges directly to you.
By the way, there's no point in having an ORDER BY clause in a sub-query like you're doing, and there's no point in having ORDER BY in an INSERT statement. It's not causing the ORA_00932 error (or any other error), it's just wasting resources.
Edited by: Frank Kulash on Mar 23, 2011 4:02 PM
Change DEFINER to CURRENT_USER in a couple of places. (Bad mistake!)

Compilor shows error (DBMS_OUPUT.PUT_LINE)

Hi everyone,
I have used set serveroutput on; command outside the procedure but the compilor shows error when it reaches across output command. Please anyone can tell me where the problem is
DBMS_OUPUT.PUT_LINE(X);
DBMS_OUPUT.PUT_LINE('Y=', XY;
Cheers

Also, DBMS_OUTPUT,PUT_LINE takes just one parameter, so your second call should be:
DBMS_OUTPUT.PUT_LINE('Y=' || y);HTH
Regards Nigel

FOTA in N73 doesn't work, it keep showing error

Hello Sir,
I am from India. I have a N73 ME. When i am trying to update device firmware over the air, with configured server profile, it says "Authentication failed, please check server id/password"
I triple checked the settings, and found them correct. What happened, let me tell you step by step.
1. Device manager
2. Check for update
3. Chosen profile created by me.
4 Then it shows checking for updates.
then it shows error "Unable to authenticate, check server ID and password"
Please help me out. What could be the problem.
Solved!
Go to Solution.

No updates of N73 were released via fota, so checking with the device manager would give only 'no updates available', suffice to say it dont support that method of updating the firmware, in order to get that message get the correct settings from your provider also make sure the default profile is set to 'nokia'
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Sqlplus "start" show error on failure exit on success

Hi all,
I have made a "Windows Scripting Host" script that dynamically create a sql script for package compilation and run it with sqlplus.
Script code
set scan off
set define off
+@<package_path>+
show error
pause
exit
What I want is that when the package compilation success the script exit, but show errors, pause, exit when fails. Something like this
Script code
set scan off
set define off
+@<package_path>+
if fail then
show error
pause
end if
exit
I try to use "whenever sqlerror continue" but with no luck
Script code
set escchar @
set scan off
set define off
whenever sqlerror continue
+@C:\Progetti\Net@Siu\Database\SIUMETERING\STOREDS\PKSPEC\old\LET_GEST_ACQUISIZIONE_ESTESA_h.sql+
exit
show error
pause
exit
Thanks for your help
Massimo
Edited by: maxfid on 29-apr-2010 20.24
Edited by: maxfid on 30-apr-2010 14.39

Catching errors directly in sqlplus is tough. Hitting an error after setting "whenever sqlerror exit" and you are done for. No time to pause. You can set a flag on error via a bind variable that a calling program could use to determine what to do next:
SQL> var err_num number
SQL> exec :err_num:=9999
PL/SQL procedure successfully completed.
SQL> whenever sqlerror exit :err_num
SQL> select andy from dual;
select andy from dual
ERROR at line 1:
ORA-00904: "ANDY": invalid identifier
Disconnected from Oracle Database 10g Release 10.2.0.1.0 - Production
C:\Temp>echo %errorlevel%
9999But if all your scripts are doing are compiling source code then compilation warnings aren't errors anyway.
I've seen Laurent Schneider do some fancy things with catching compilation "errors" in this regard: {message:id=2732328}
If the end goal is to run a lot of scripts and stop when there is an error maybe after each script you could output (spool) a "show errors" to a file and then peek at it before moving onto the next script. If you don't see a "No errors." then pause.

Hello recently i have purchased new iphone 5 its showing error (1) when i try to restore through i tunes and the iphone screen is stuck at itune kindly please helo

hello recently i have purchased new iphone 5 its showing error (1) when i try to restore through i tunes and the iphone screen is stuck at itune kindly please help

Try to Restore on different computer with current iTunes. If still problem after Restore, then make Genius reservation or set up service and take or send to Apple for resolution.

Showing Error 101

Downloading installing Setting is almost done only 8 minutes ramainnig ,Now showing Error 101.What should I do ?

Error 10# (any #) : Troubleshoot Adobe Download Assistant :
http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio n_2

Show error in download accelerator plus at 99% on firefox

I used DAP to download videos it shows error on download complete state @ 99%
as,
Downloaded file cannot be saved
Error: The file name, directory name or volume label syntax is incorrect

It's quite clearly trying to run some sort of security scan on the downloaded file and something is broken so it's waiting forever for it to finish.
You can still get to the exe file, right click the download and browse to the folder it's downloading to. Make sure you can see hidden files and also do not have known file extensions hidden (every Windows user should know how to set this) you should see the file you're downloading in there and another file with the same name but with .part on the end. Right click this "part" file and select copy, paste it somewhere else (temp folder) and rename it to what it's supposed to be. Then you should be able to run it.
Alternatively, you can also use another browser to download the same file. Right click the download in Firefox and select "Copy Download Link". Then paste this link into another browser and let that download it.
There's probably something in about:config you can change to prevent the security scan from running ( browser.download.manager.alertOnEXEOpen may be worth a try ). My guess is that some antivirus program you had installed in the past inserted something into Firefox that it didn't bother to remove when the AV software was uninstalled. This kind of thing also used to break Microsoft Office as well.

Compiling a view doesn't show errors

Hello,
Compiling a PL/SQL procedure shows compilation errors correctly, but compiling a view says "view compiled" without reporting the errors. It seems the only way to see the errors is to do select * from user_errors afterwards. Or is there a setting somewhere?
It's also slightly odd that it asks for confirmation before compiling the view, whereas PL/SQL compilation does it right away. I'd prefer the latter.
I'm using version 1.5.1 on Linux (Ubuntu).
Many thanks
Ed

How are you compiling your view? The only place I can remember being given feedback on view errors is when running a create or replace view command as a script (not as a statement). Apart from that, selecting from user_errors is the only way that I know to report on view errors - even "show errors view <viewname>" doesn't work.
theFurryOne

Set-HybridConfiguration showing error

Similar Messages

Maybe you are looking for