Set image link to a file which not yet exists

Hi to all,
I'm working with InDesignCS2 on Mac and Windows.
Is it possible to set an image link to a file which does not exists yet.
I have document with some JPG files in low resolution.
Later, if the document layout is finished, I want to
change the image links of the document to corresponding PSD files.
E.g.
The document is layouted with the imges image1.jpg, image2.jpg, image3.jpg.
Now a want to change the links to corresponding PSD files image1.psd, image2.psd, image3.psd.
BUT: the PSD file do no exist on the current working place.
The images image1.psd, image2.psd, image3.psd exist on a destination working place.
The document with the missing PSD links will be copied to the destination working place,
in the some folder where the PSD file are placed.
If I open the document on the destination working place the links set on the first
working place should be satisfied now.
Now it should be possible to print the document with the hires PSD images.
My question:
How can I set a link to an image which does not exist yet?
The name, the path and the format are known.
Please let me know, if you have an idea how to do that.
Thanks.

I might be proven wrong but I don't think you can link to a picture file that's missing.
That would be an interesting feature actually - but probably too smart.
What you could do instead is to use a dummy picture file to be replaced later in your production workflow.
Something I did a long time ago was to create a text frame with the full path written in there.
Then I was making a snapshot of this text frame.
Then I was replacing the text frame by a picture frame - same size, position, etc.
Then I was placing the snapshot within this picture frame...
At the end I had a link to a temporary picture file that was displaying its full path to the layout artist - providing a valid link to a real picture, to be switched to the real one later in my customer production workflow.
This is a classical case actually - and I'm sure there is dozens of solutions implemented out there . . .
HTH
Best regards
Patrick Perroud

Similar Messages

[svn:osmf:] 17499: Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available

Revision: 17499
Revision: 17499
Author:   [email protected]
Date:     2010-08-27 11:05:22 -0700 (Fri, 27 Aug 2010)
Log Message:
Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-990
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/ImageElement.as

Revision: 17499
Revision: 17499
Author:   [email protected]
Date:     2010-08-27 11:05:22 -0700 (Fri, 27 Aug 2010)
Log Message:
Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-990
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/ImageElement.as

IMovie HD creates corrupt db file which not get deleted out of trash

iMovie HD creates corrupt db file which not get deleted out of trash.
How to delete this file ?
Please help me out,
Thank You.

Where is what file created? (Do you see it in iMovie or Finder?)
Which trash, iMovie's or Finder's?

What will happen when redo log file or archive log file, which is yet to be

What will happen when redo log file or archive log file, which is yet to be read by logminer is corrupted? It seems that the captures process hangs between “Paused for flow control” and “Enqueuing Messages”. How to come out of this condition without recreating the captures process?
Any clue is helpful
Thanks in advance for your help.

Basically you can't skip SCN since it will result in a data integrity issues (say you had skipped some inserts and later there will be some updates to a not replicated data).
Streams maintain their own checkpoint tables with transaction related stuff. So there is no way you can jump over a range of SCN's without recreating capture.
The only thing you can try - temporary give capture process a rule without any objects. But it will need to mine through the redo anyway.

Aperture keeps multiple duplicate images in the library file which do not show up in the app

So, I recently had to merge two libraries which have some common images. Although upon import Aperture asked me if I wanted to "Add or Merge" the libraries (I selected "merge", which wouldn't import duplicates), I wanted to confirm there were no duplicates in fact brought in. I ran Duplicate Annihilator, which made a strange claim (about most photos, in fact): it showed a file as a duplicate which had no copies that I could find - searching for it by name revealed exactly one image.
Curious, I searched inside the actual photo library. Imagine my surprise when I found the following files
...Library/Masters/2007/Aug 10, 2007/IMG_0002/IMG_0002.JPG
...Library/Masters/2007/Aug 10, 2007/IMG_0002 (1)/IMG_0002.JPG
...Library/Masters/2007/Aug 10, 2007/IMG_0002/IMG_0002.JPG
which are in fact *exactly* the same image. Meanwhile, to reiterate, Aperture shows only ONE photo:
IMG_0002.JPG
Shocked, I investigated further. In fact almost every single file which was in common between both libraries was "imported but not displayed", which explains why my two libraries of sizes 50GB + 50GB after merger = 100GB when, the two libraries in terms of images had 10k + 12k after merger = 14k images.
Aperture imported all the photos into the new library. But it just opted not to use half of them.
So, now I have a bloated-by-2x library, and of course the frustration with Aperture having made such an insane, bone-headed move. Those files are essentially dead weight which will follow the library around for all eternity.
1) Why?
2) How to fix?
thanks!

I would take a step back here before going further. William's suggestion might very well clean up the library but something obviously did not go right and to start mucking about in the library might make things worst.
For starters I'm surprised to see the folder structure you showed in your first post. Aperture stores managed masters (originals) by import date and time. The structure (in all libraries I've ever seen) looks like:
So something seems wrong with your master folder.
Also the three folders you showed the first and third are identical ( the middle one has the (1) added to which is how the OS handles duplicates in a folder) so this shouldn't even be possible, those folders should not be there.
I'm wondering if this is something left over from your using Duplicate Annihlator. Do you have a copy of the library before you ran the merge and used DA on it? Would be interested to see what the master folder looks like.
Finally when you ran the merge which library did you tell Aperture to use as the master, the one that was used to resolve conflicts?
Again William's suggestion might be all you need to do but it would be good to figure out want went wrong before proceeding.
regards
Message was edited by: Frank Caggiano - A better first step might be to run the Aperture first aid tools, repairing and possibly rebuilding the library.

How set image size open raw file?

How to set image size/resolution when opening a raw file in pse 11 editor??
win 7 pro; pse 11 settings: edit>preferences>print resolution = 337.596, screen resolution 109 dpi( 27 inch, dell U 2711). Originally print resoltuion was set to 240 dpi but was changed in case this was causeing a problem. CRAW v 7.4.0.137
Camera alpha 65, image size is: 6000x3376 dpi; (83.33x46.88 inch)
Problem is: Currently when I edit a RAW file in CRAW and then open in pse editor image size is: 6000x3376 px; 25x14.667 inches at 240 dpi ( by ration this corresponds to:17.773x10 inch at 337.6 dpi)
I am trying to change settings so the raw file opens as: 17.776x10 and anywhere from240 to 337.6 dpi
whatever works or is esiest to set.
My settings are for use in creating blue ray dvd movies and with cropping and editing printing high quality pictures for family.
Thanks in advance for any help you can provide.

That's a Sony Alpha SLT-A65?
Are those pixel dimensions of 6000 x 3376 the size the camera raw files came out of the camera?
You can't really change the resolution that the photoshop elements version of camera raw opens the the files into the pse 11 at.
(i think 240 is the default for most cameras)
You can however set the resolution with Image>Resize>Image Size if you need to for printing or other uses.
In the Image size dialog uncheck Resample Image and enter the resolution.

Images and .properties(bunldes) files are not being found from my JSPs

Hi,
I have created .ear file by using ANT Application. And deployed into Oracle9iAS(OC4J). Here problem is that images and .properties(internationalization bundles)files are not found from JSPs.
Here is my directory structure.
public_html--->locale -->BusinessEntity -->businessentity_en_US.properties
--->enterprise -->images -->knowldege.jpg
--->BusinessEntity-->BEAdd.jsp
in my jsp bundle(.properties)file is accessed like this:-
<i18n:bundle baseName="/locale/-->BusinessEntity/businessentity" id="businessentity" locale="<%= locale %>" />
in my jsp images accessed like this:-
src="/enterprise/images/knowldege.jpg".
In my working environment, without creating .ear file, images and .properties files are being found my JSPs. But if i create .ear file and after deploy, images and .properties files are not being found my JSPs.
please let me know where i might did wrong
thanks in advance
srinivas

Hi i am again. Here is my configuration files(server.xml and default-web-site.xml)
server.xml :-
<?xml version="1.0"?>
<!DOCTYPE application-server PUBLIC "-//Evermind//DTD Orion Application-server//EN" "http://xmlns.oracle.com/ias/dtds/application-server.dtd">
<application-server application-directory="../applications"
deployment-directory="../application-deployments"
>
     <library path="../tools.jar" />
     <rmi-config path="./rmi.xml" />
     <jms-config path="./jms.xml" />
     <log>
          <file path="../log/server.log" />
     </log>
     <transaction-config timeout="30000" />
     <global-application name="default" path="application.xml" />
     <application name="nalluri" path="../applications/trainiumear.ear" auto-start="true" />
     <global-web-app-config path="global-web-application.xml" />
     <web-site path="./default-web-site.xml" />
     <cluster id="-1640090707" />
</application-server>
default-web-site.xml:-
<?xml version="1.0"?>
<!DOCTYPE web-site PUBLIC "Orion Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">
<web-site port="8888" display-name="Default Oracle9iAS Containers for J2EE Web Site">
     <default-web-app application="nalluri" name="Commonwar" />
     <access-log path="../log/default-web-access.log" />
</web-site>
thanks in advance
wating for reply
srinivas

ORACLE 9i startup problems. Try to open dbf file which doesn't exist

Hi all,
I'm trying to startup one oracle instance from sqlplus.
I can mount the database but i can't open it because try to open one dbf file incorrect.
Anyone know where i can indicate wich files should use? Perhps it's in the init.ora file?
Regards

I am not sure which method rdomene used but I would think he probably used the alter database backup control file to trace command (since he could mount the db)to create a text version that he could look at.
I have head about people who did not know Oracle provided a means of dumping a text version of the control file to trace who used UNIX strings or a binary editor to see the contents.
It is unfortunat that the text version, which can be used to reconstruct the control file, does not preserve the rman data.
HTH -- Mark D Powell --

Schedule Report Error - Error in File (Operation not yet implemented)

Crystal Reports Server XI R2
Microsoft SQL Server 2003 SP2
We have a report that is run for 100s of Schools once a month. We started getting the below message. We tried to manually run the report from the CMC and get the same message.
Any suggestions on how to resolve this?
Thanks,
Lisa
Status: Failed
Printer: The instance is not printed.
External Destination: None
Data Refresh Settings: Use the server defaults
Start Time 4/7/09 3:10:21 PM
End Time 4/7/09 3:10:33 PM
Server Used: CO-APT01.reportjobserver
Error Message: Error in File D:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\CO-APRT02.reportjobserve\~tmp4cc5a1e77c49110.rpt: Operation not yet implemented.

Hi Rene,
Try this as remedy to your problem.
Whenever you are using the New Page before for a Group, go to Section Expert for the corresponding section and check the New Page Before property and go to Conditional formula and type the following:
Not OnFirstRecord
Whenever you are using the New Page after for a Group, go to Section Expert for the corresponding section and check the New Page After property and go to Conditional formula and type the following:
Not OnLastRecord
HTH...
Thanks,
Amogh

I cannot play some songs on itunes, I get a prompt for an old email address which not longer exists and I don't know the password. HOw can I get them authorized to my new email address and password?

I cannot play some songs on itunes, I get a prompt for an old email address which no longer exists and I don't remember the password. How can I get these tunes transferred to my new email address and password?

In one of the help pages for managing your Apple ID (http://support.apple.com/kb/HE40), it shows two separate sections, one for Apple ID and one for Primary Email address. When I go to manage my Apple ID, I see only a single section for both. Can the two be 'separated', especially when you face the situation of having to discontinue your email address for some reason?
I also noticed that when navigating to Apple ID Support Communities, it shows my nickname 'dishdy'. How and when did I insert this? In the current sequence for creating an Apple ID I don't see this. In my current profile I don't see this.
In any case, I have freed myself from my previous Apple ID (@artemis.it) on my iPhone.
Thanks for your help.

After upgrading to Firefox 11.0, clicks that link to a file do not report in the history and do not show up as visited.

Installed Beta 12.0 to no resolution. This same issue is happening on my other computer running 11.0. Checked in MS Explorer and links work normally.
Here's an example link:
file:///Z:/shared_cvo_docs/cust_inventory.xlsx
This link opens a excel spreadsheet file from my system. I have many of these types of links and I find it very helpful when I use the browser to open these as I can see which ones I've already opened. Without the links changing color, this becomes very difficult.
Running Win 7 Ultimate
Thanks for your help!

My history shows local .html files displayed in the browser, but not local files handed off to an external program. Is that the pattern you see as well?
No idea whether this was an intentional change (I don't see it on the Firefox 11 change list: [http://www.mozilla.org/en-US/firefox/11.0/releasenotes/buglist.html].)

Link in pdf-file does not work on Ipad

With my site www.bartkuijer.nl I offer visitors the free possibility to see (and download) sheetmusic, from music written by me. These are pdf-files. But they can not only SEE the sheetmusic; the music on that pdf-files can also be PLAYED. That's done bij clicking on a link in that pdf-file to a mp3-file of the music on my site.
This works fine on a pc. When I try this on the Ipad of my wife it DOES NOT WORK!
So my question is: how come? And what to do to make this work also fine on an Ipad.
This is important for me, because I want this sheetmusic to place as Ipad-apps for free.

It works!
But not with a pdf-file. The Ipad does not recognize links in a pdf-file.
Te solution is found by making a htm-file with emdedding a quicktime-player and images of the music. This is my first Ipad product. On a pc the player starts immediately; on the Ipad it has to be started.
Now I have to work on a solution to change this to an app

Broken Links in iTunes - files have not been moved

Hi,
I'm running iTunes on my XP machine. I have about 10,000 tracks in my library. Every so often (well quite often nowadays) I get a load of tracks that have the exclamation mark next to them saying the file can't be found. I have not moved any of the tracks. When I double click ont he first offending track it asks if I want to locate it. I click OK, and it presents the folder where the file actually is (and always has been!) I then have to go through the rest of my library - each track with an exclamation mark just needs to be double clicked and it miraculously remembers where the file is!
OK, so the questions are:
1) Why is iTunes forgetting the locations of files that haven't moved? I'm guessing there might be some issue with the iTunes Music Library.xml - but I ahve no idea what.
2) Can I stop it happening? Obviously the best solution is to dump windows and buy a mac - which will be happening in a month or so...
3) If I can't stop it happening, is there a way for iTuens to just show me the broken links so that I can go through the double-clicking process easily?
4) If I delete the library and recreate, will iTuens remember things like bespoke artwork, ratings, etc?
Any help would be appreciated.
Thanks,
X.

+"4) Absolutely not; the ITL file holds ratings, playcount, date added and other metadata that will be lost. And you can't get it back by rebuilding your library from the XML file."+
Actually, this is exactly what you can do with the XML file. Prior to iTunes 5.0, importing the XML did not capture rating, playcounts, etc. even though the data was written to the XML file. Since then, you can recreate your Library completely by importing the XML file.
A while ago I performed two tests:
a) One where I deleted the total song references from the Library, then 'imported' the XML file (from a previously saved iteration)
b) The other, I opened iTunes with no Library database to start, forcing it to act like a new install, then imported the XML file
In both cases, the XML file was completely read, including Ratings, Play Counts and Last Played attributes. All playlists (both Smart & Static) were recreated in their proper folders. It seems to have recreated the Library almost as well as the ITL file would. Looks as if iTunes v6.0.1 (and later) now reads and uses the complete XML file upon 'import'.
I say 'almost', as there were settings differences when starting from a 'virgin' iTunes. Also (and this is important), the create/load time when using the XML file was severely long. iTunes needed to read, interpret, and act on the information within the XML file and that took a long time. At that time, I had close to 12,000 song references and over two dozen playlists. Using a 'good' backup ITL file is an almost instantaneous fix.
Bottom line: Either file will work in recreating the Library. A backup ITL file, in my opinion, is still the easiest and fastest way to recreate your Library if one has a choice. In some cases, where one cannot place the music into the correct path for the ITL file to work properly, one can globally change the XML file to reflect the new path and use that for a very close approximation. I would suggest making and archiving legacy copies of both files a big part of your backup strategy (along with the music files, of course).
Hope this clears things up for you.
Best of Luck

Windows 8.1 having same issue: Windows could not parse or process unattend answer file (C:\Windows\Panther\unattend.xml) for pass [specialize]. A component or setting specified in the answer file does not exist.

I know there are similar other issues with IE 10 and Windows 7. This is WINDOWS 8.1, and the IE Welcome message is totally absent from the default unattend.xml in the c:\windows\panther directory. In fact, I did a sysprep without using any injected
unattend.xml - this is the Microsoft Default!
So I suspect this will start appearing all over again soon. Anyone figure out what was causing it?
Here is the new Specialize section from the xml:
<settings pass="specialize">
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-SQMApi" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <CEIPEnabled>0</CEIPEnabled>
        </component>
        <component name="Microsoft-Windows-SQMApi" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <CEIPEnabled>0</CEIPEnabled>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            
            <ComputerName>Win8</ComputerName>
            <TimeZone>Pacific Standard Time</TimeZone>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            
            <ComputerName>Win8</ComputerName>
            <TimeZone>Pacific Standard Time</TimeZone>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
               
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>3</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>powercfg -h off</Path>
                    <Order>4</Order>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>cmd /c %WINDIR%\Setup\Specialize_x64.cmd</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
               
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>3</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>powercfg -h off</Path>
                    <Order>4</Order>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>cmd /c %WINDIR%\Setup\Specialize_x86.cmd</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
         <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <BlockPopups>yes</BlockPopups>
            <CompanyName>FYM Inc</CompanyName>
            <DisableAccelerators>true</DisableAccelerators>
            <DisableDevTools>false</DisableDevTools>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <DisableOOBAccelerators>true</DisableOOBAccelerators>
            <DisableWelcomePage>true</DisableWelcomePage>
            <EnableLinksBar>false</EnableLinksBar>
            <FavoritesDelete>true</FavoritesDelete>
            <FilterLevel>High</FilterLevel>
            <Help_Page>www.google.com</Help_Page>
            <Home_Page>www.google.com</Home_Page>
            <LockToolbars>false</LockToolbars>
            <MSCompatibilityMode>false</MSCompatibilityMode>
            <NoDial>true</NoDial>
            <ShowCommandBar>true</ShowCommandBar>
            <ShowInformationBar>true</ShowInformationBar>
            <SuggestedSitesEnabled>false</SuggestedSitesEnabled>
            <SearchScopes>
                <Scope wcm:action="add">
                    <DisplayQuickPick>true</DisplayQuickPick>
                    <ScopeDefault>true</ScopeDefault>
                    <ScopeDisplayName>Google</ScopeDisplayName>
                    <ScopeKey>Search1</ScopeKey>
                    <ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
                    <ShowSearchSuggestions>true</ShowSearchSuggestions>
                    <ShowTopResult>true</ShowTopResult>
                </Scope>
            </SearchScopes>
        </component>
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <BlockPopups>yes</BlockPopups>
            <CompanyName>FYM Inc</CompanyName>
            <DisableAccelerators>true</DisableAccelerators>
            <DisableDevTools>false</DisableDevTools>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <DisableOOBAccelerators>true</DisableOOBAccelerators>
            <DisableWelcomePage>true</DisableWelcomePage>
            <EnableLinksBar>false</EnableLinksBar>
            <FavoritesDelete>true</FavoritesDelete>
            <FilterLevel>High</FilterLevel>
            <Help_Page>www.google.com</Help_Page>
            <Home_Page>www.google.com</Home_Page>
            <LockToolbars>false</LockToolbars>
            <MSCompatibilityMode>false</MSCompatibilityMode>
            <NoDial>true</NoDial>
            <ShowCommandBar>true</ShowCommandBar>
            <ShowInformationBar>true</ShowInformationBar>
            <SuggestedSitesEnabled>false</SuggestedSitesEnabled>
            <SearchScopes>
                <Scope wcm:action="add">
                    <DisplayQuickPick>true</DisplayQuickPick>
                    <ScopeDefault>true</ScopeDefault>
                    <ScopeDisplayName>Google</ScopeDisplayName>
                    <ScopeKey>Search1</ScopeKey>
                    <ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
                    <ShowSearchSuggestions>true</ShowSearchSuggestions>
                    <ShowTopResult>true</ShowTopResult>
                </Scope>
            </SearchScopes>
        </component>
         <component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <fAllowFullControl>true</fAllowFullControl>
                <fAllowToGetHelp>true</fAllowToGetHelp>
         </component>
         <component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <fAllowFullControl>true</fAllowFullControl>
                <fAllowToGetHelp>true</fAllowToGetHelp>
         </component>
         <component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableWER>1</DisableWER>
         </component>
         <component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableWER>1</DisableWER>
         </component>
        <component name="Microsoft-Windows-powercpl" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
             
             <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
             
             
             
             
        </component>
        <component name="Microsoft-Windows-powercpl" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
             <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
        </component>
       <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
           <Identification>
               <JoinWorkgroup>Workgroup</JoinWorkgroup>
           </Identification>
       </component>
       <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
           <Identification>
               <JoinWorkgroup>Workgroup</JoinWorkgroup>
           </Identification>
       </component>
        <component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
        </component>
        <component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
        </component>
    </settings>
I'm thinking of dumping the entire IE section and see what happens.

I too received this error as I tried to run my first Windows 8.1 deployment. Per another post I commented out this line
<IEWelcomeMsg>false</IEWelcomeMsg>
from the IE section of the unattend.xml. I was then able to run my deployment. I do not see this line in your posting though.
I referenced this link even though it was for Windows 7.
http://social.technet.microsoft.com/Forums/en-US/c41a2b69-a591-4cd3-86ab-6a0f8a73b858/getting-windows-could-not-parse-or-process-the-unattend-answer-file-for-pass-specialize-with?forum=mdt
Hope this helps someone.
JayTheTech
To clarify, I edited the unattend.xml file from from Deployment Share, not C:\Windows\Panther.
DS\control\task sequence ID\unattend.xml
JayTheTech

Data set created out of csv file: columns not recognized, too many rows

After uploading a csv file I got out of the OPP the columns don't get recognized in the dataset viewer. Perhaps this happens because the delimiter is a semicolon instead of a comma? Unfortunately, I have no influence how the data gets exported out of the OPP. Is there any option to configure which delimiter to recognize, like it's possible in excel?
Further, is it possible to configure from which row on the data should be taken into account, similar to excel? With the csv file I get out of the OPP, the data only starts with row 7, while row 6 has the headings.

After uploading a csv file I got out of the OPP the columns don't get recognized in the dataset viewer. Perhaps this happens because the delimiter is a semicolon instead of a comma? Unfortunately, I have no influence how the data gets exported out of the OPP. Is there any option to configure which delimiter to recognize, like it's possible in excel?
The delimiter cannot be configured. Comma is the delimiter. I would suggest that you open this file in text editor then replace semicolon with comma. After that you can reupload your dataset.
Further, is it possible to configure from which row on the data should be taken into account, similar to excel? With the csv file I get out of the OPP, the data only starts with row 7, while row 6 has the headings.
This is not configurable as well.

Set image link to a file which not yet exists

Similar Messages

Maybe you are looking for