Set implicit_transactions inside of a procedure

Hello community,
I tried to turn implicit_transactions ON/OFF with the help of a procedure. when i call the procedure implicit_transactions should turn ON
I wrote this procedure:
CREATE PROCEDURE sp_on
AS
BEGIN
SET IMPLICIT_TRANSACTIONS ON
END
when I execute this procedure nothing changes, the implicit_transactions still turned OFF. has anyone an idea why this does'nt work?
thanks for help
best regards
Salem

Hi Salem,
You can add a parameter valuing a Stored Procedure(SP) name to the SP which inside the implicit_transactions is set on. The passed SP can run with the specific options.
CREATE PROC StartImplictTransactions @procName varchar(max)
AS
SET IMPLICIT_TRANSACTIONS ON;
SELECT CASE WHEN (@@OPTIONS & 2) = 2 THEN 'ON' ELSE 'OFF' END AS [InsideProcedure]
EXEC @procName
GO
CREATE PROC testProc
AS
SELECT CASE WHEN (@@OPTIONS & 2) = 2 THEN 'ON' ELSE 'OFF' END AS [implicitTrans];
SELECT CASE WHEN (@@OPTIONS & 2) = 2 THEN 'ON' ELSE 'OFF' END AS [BeforeProcedureCall];
EXEC StartImplictTransactions 'testProc'
SELECT CASE WHEN (@@OPTIONS & 2) = 2 THEN 'ON' ELSE 'OFF' END AS [AfterProcedureCall];
If you have any question, feel free to let me know.
Best regards,
Eric Zhang

Similar Messages

Using ALTER SESSION inside a stored procedure.... not a good idea?

Hi,
I have two stored procedures, both of which are used to query a database to find a particular book, based on ISBN. One sproc searches our main product catalogue and the other searches our suppliers feed catalogues. The stored procedures are called from a C# application via a search tool and the user is able to search on either our catalogue or our suppliers. The appropriate procedure is called based on the users choices.
However, the following behaviour is observed
I search for an ISBN (is a varchar2 field, as isbn's may contain an X if the checksum digit equates to 10) on a feed, so uses the FEED SPROC. The book is found and returned to the app in about 0.5 seconds. I can repeat this as often as i like on different books etc. always works fine.
I then do the same search but against our own catalogue, so uses our CATALOGUE SPROC. Again the book is found quickly, and the search can be repeated with the same results.
If i then go back and run our FEED SPROC then the search time increases to about 3 minutes !
Both the feed and our catalogue is in the same database, although different schema's the connections will be pooled through our app server.
I can repliacte this every single time. I think i have narrowed doen the cause of this behaviour to a few lines of code in our CATALOGUE SPROC:
-- store values
select value into v_vch_NLS_COMP from nls_session_parameters nsp where nsp.parameter = 'NLS_COMP';
select value into v_vch_NLS_SORT from nls_session_parameters nsp where nsp.parameter = 'NLS_SORT';
-- Ensure case insensitivity throughout
EXECUTE IMMEDIATE 'ALTER SESSION SET NLS_COMP = LINGUISTIC';
EXECUTE IMMEDIATE 'ALTER SESSION SET NLS_SORT = BINARY_CI';
do other stuff
-- restore session variables
EXECUTE IMMEDIATE 'ALTER SESSION SET NLS_COMP = ' || v_vch_NLS_COMP;
EXECUTE IMMEDIATE 'ALTER SESSION SET NLS_SORT = ' || v_vch_NLS_SORT;
If i remove this code then all is well, so i am assuming that using ALTER SESSION inside a stored procedure is the cause of the problem as it would be changing the execution plan of the FEEDS SPROC in some manner? Any ideas? I know i can just rewrite the sproc to avoid using this coding, but wanted to understand if i am doing something wrong by using ALTER SESSION in this manner?
Any pointers would be appreciated.
John Thompson
Software Architect,
play.com
Edited by: user7186902 on 27-May-2009 03:51

Hello (and welcome),
It may be a case of having to create a linguistic index to facilitate the queries once you set these session level parameters, i.e..,
CREATE INDEX idx_01 ON tab ((NLSSORT(col1, 'NLS_SORT=BINARY_CI'))It would appear that the setting of those parameters is invalidating index searching on the current indexes.

Calling Stored procedure inside an Stored procedure

Hi,
I am working in oracle 9i. I want to call a stored procdure from another stored procedure.
Kindly provide me the example...
rgds.

having a pocedure called PRCD1,
Create or Replace Procedure PRCD2 IS
egin
PRCD1;
END;
cheers !!!It will for surely err out. You cannot use "EXECUTE" inside a stored procedure.
Here's how you do it:
SQL> create or replace procedure p1 is
2 begin
3    dbms_output.put_line('I am P1');
4 end;
5 /
Procedure created.
SQL> create or replace procedure p2 is
2 begin
3    dbms_output.put_line('I am P2');
4    p1;
5 end;
6 /
Procedure created.
SQL> set serveroutput on
SQL> exec p2
I am P2
I am P1
PL/SQL procedure successfully completed.
SQL>

Extract data in to excel inside a stored procedure

Hi,
Is there a way to extract data from a table in to excel inside a stored procedure and not using SSIS?
Thanks,
Preetha

Here's a similar, simpler, sample.
Sub TestMacro()
' Create a connection object.
Dim cnPubs As ADODB.Connection
Set cnPubs = New ADODB.Connection
' Provide the connection string.
Dim strConn As String
'Use the SQL Server OLE DB Provider.
strConn = "PROVIDER=SQLOLEDB;"
'Connect to the Pubs database on the local server.
strConn = strConn & "DATA SOURCE=(local);INITIAL CATALOG=NORTHWIND.MDF;"
'Use an integrated login.
strConn = strConn & " INTEGRATED SECURITY=sspi;"
'Now open the connection.
cnPubs.Open strConn
' Create a recordset object.
Dim rsPubs As ADODB.Recordset
Set rsPubs = New ADODB.Recordset
With rsPubs
' Assign the Connection object.
.ActiveConnection = cnPubs
' Extract the required records.
.Open "SELECT * FROM Categories"
' Copy the records into cell A1 on Sheet1.
Sheet1.Range("A1").CopyFromRecordset rsPubs
' Tidy up
.Close
End With
cnPubs.Close
Set rsPubs = Nothing
Set cnPubs = Nothing
End Sub
Finally, this answers you exact question.
Option Explicit
Sub Working2()
'USE [Northwind]
'GO
'DECLARE @return_value int
'EXEC @return_value = [dbo].[TestNewProc]
' @ShipCountry = NULL
'SELECT 'Return Value' = @return_value
'GO
Dim con As Connection
Dim rst As Recordset
Dim strConn As String
Set con = New Connection
strConn = "Provider=SQLOLEDB;"
strConn = strConn & "Data Source=LAPTOP\SQL_EXPRESS;"
strConn = strConn & "Initial Catalog=Northwind;"
strConn = strConn & "Integrated Security=SSPI;"
con.Open strConn
'Put a country name in Cell E1
Set rst = con.Execute("Exec dbo.TestNewProc '" & ActiveSheet.Range("E1").Text & "'")
'The total count of records is returned to Cell A5
ActiveSheet.Range("A5").CopyFromRecordset rst
rst.Close
con.Close
End Sub
Sub Working()
'USE [Northwind]
'GO
'DECLARE @return_value int
'EXEC @return_value = [dbo].[Ten Most Expensive Products]
'SELECT 'Return Value' = @return_value
'GO
Dim con As Connection
Dim rst As Recordset
Set con = New Connection
con.Open "Provider=SQLOLEDB;Data Source=LAPTOP\SQL_EXPRESS;Initial Catalog=Northwind;Integrated Security=SSPI;"
Set rst = con.Execute("Exec dbo.[Ten Most Expensive Products]")
'Results of SProc are returned to Cell A1
ActiveSheet.Range("A1").CopyFromRecordset rst
rst.Close
con.Close
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Ws-basic username inside pl/sql procedure published as web service

I'm new to jdeveloper, but been working with Oracle for 13 years...
We have used Jdevelper to expose a pl/sql procedure as a web service using the "Publish as web service..." wizard. We then used Web Services Manager in server agent mode to protect that web service using ws-basic header auth. OWSM does a lookup on the user supplied credentials against our active directory ldap server to determine if the user should be able to call the service. That all works, EXCEPT...
The problem is that the stored procedure runs a query against data protected by virtual private database and extensive audit logs. We need access to the ws-basic credential from within oracle so that we can set the session context and pull the end-user's id for auditing purposes.
Right now, all we know inside the stored procedure is the oracle username used to connect to the database. This is of course different from the one used to authenticate our user in the OWSM layer.
The pl/sql procedure does not have a parameter to specify the user name, and even if it did, there is no way for us to verify that any user supplied parameter matches the credentials used in OWSM.
So, I assume, I need to modify the code generated by the "Publish as web service" wizard and somehow pull the ws-basic credentials (just username) and push them into the Oracle session_context.
Anyone have any sample code or advice on how to get access to ws-basic credentials or even any of the metadata on a certificate supplied to OWSM for authentication/authorization?

I change p_action value ( before p_action => 'alta' ) now ( p_action => '"alta"' )
res := Xxm_Web_Service_Client_Pkg.invoke(p_init_msg_list => FND_API.G_TRUE,
p_url => 'http://198.137.253.178:7777/event/DefaultSystem/clienteService_RS',
p_action => '"alta"',
x_return_status => l_return_Status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
x_req => req)
And the invokation an ESB service from a PLSQL procedure began to work fine !!!
Thanks for all answers
Thans Peter !!!
Claudio

How to get the store procedure name inside this store procedure?

how to get the store procedure name inside this store procedure?

Why cant you get the procedure name as hard code as the proc name is going to change.
Are you looking for getting the parent proc name from child proc name which is getting executed within parent proc?
Try the below:
--Parent Proc
Alter Proc sp_test
as
Begin
Declare @s varbinary(MAX) = Cast('sp_test' as Varbinary(MAX));
SET CONTEXT_INFO @s;
exec sp_test2
End
--Child proc
Alter proc sp_test2
as
SELECT Cast(CONTEXT_INFO() as varchar(100));
--Test execution
Exec sp_test
Please mark this reply as answer if it solved your issue or vote as helpful if it helped.
[Blog]

How to change Default setting AutoCommit to 0 in Procedure or in Connecting

[tttest@host1 ~]$ ttisql "dsn=ana_tt1122"
Copyright (c) 1996-2011, Oracle. All rights reserved.
Type ? or "help" for help, type "exit" to quit ttIsql.
connect "dsn=ana_tt1122";
Warning 20000: Use of a deprecated feature: Authenticate (ignored)
Connection successful: DSN=ana_tt1122;UID=tttest;DataStore=/timesten/TimesTen/tt1122/info/ana/ana;DatabaseCharacterSet=ZHS16GBK;ConnectionCharacterSet=ZHS16GBK;DRIVER=/timesten/TimesTen/tt1122/lib/libtten.so;OracleId=ABCD;PermSize=1200;TempSize=500;TypeMode=0;OracleNetServiceName=ABCD;
(Default setting AutoCommit=1)
The "Default setting AutoCommit=1",I can modify it only later using :
Command> autocommit 0;
But, I want to know: Can I set the "Default setting AutoCommit=0"? When I connect the DSN? or Can I set "Default setting AutoCommit=0" in a procedure ? Because sometime I maybe want to change it in procedure.
Thanks very.

As you have pointed out, in ttisql session you can use AUTOCOMMIT 0 to disable the autocommit feature.
Similarly in ODBC-based applications, execute SQLSetConnectOption function with SQL_AUTOCOMMIT_OFF.
For JDBC applications, Connection.setAutoCommit(false) method to disable autocommit feature .

Unable to call a procedure from inside a another procedure

Dear members
I am trying to call a procedure from inside an another procedure.Both the procedures are present within the same package.I am trying to call the second procedure just before the end of the first procedure.Both the procedures are compiling fine but the tables are not getting populated inside the second procedure.Also the DBMS_OUTPUT statements present in second procedures are not getting displayed.(I feel the second procedured is not getting called).
The package specification is as follows:
CREATE OR REPLACE package ANVESH.conv_api_pkg
is
    PROCEDURE PROC_CONVERSION_API(FILE_PATH IN VARCHAR2,FILE_NAME IN VARCHAR2) ;
    TYPE cts_order_details IS TABLE OF XXCTS_ORDER_DETAILS_STG%ROWTYPE;
    PROCEDURE proc_conversion_api2(p_orderdetails IN cts_order_details) ;
end conv_api_pkg;The package body is as follows:
CREATE OR REPLACE package body ANVESH.conv_api_pkg
is
PROCEDURE PROC_CONVERSION_API(FILE_PATH IN VARCHAR2,FILE_NAME IN VARCHAR2)
IS
    v_file_type utl_file.file_type;
    v_buffer VARCHAR2(1000);
    V_CUSTOMER_NAME VARCHAR2(100);
    V_MANUFACTURER VARCHAR2(100);
    V_PRODUCT_NAME VARCHAR2(100);
    V_QUANTITY NUMBER;
    V_REQ_SHIP_DATE DATE;
    V_REQ_PRICE NUMBER;
    V_LOG_FILE utl_file.file_type;
    V_COUNT_CUST NUMBER;
    V_COUNT_PROD NUMBER;
   L_ORDER_LINES CONV_API_PKG.cts_order_details:=CONV_API_PKG.cts_order_details();
BEGIN
    DBMS_OUTPUT.PUT_LINE('Inside begin 1');
    v_file_type := UTL_FILE.fopen(FILE_PATH, FILE_NAME, 'r',null);
        DBMS_OUTPUT.PUT_LINE('Inside begin 1.1');
    LOOP
        BEGIN
                    DBMS_OUTPUT.PUT_LINE('Inside begin 2');
                     UTL_FILE.GET_LINE (v_file_type,v_buffer);
                    DBMS_OUTPUT.PUT_LINE('Inside begin 2.1');
                    DBMS_OUTPUT.PUT_LINE('the buffer is '||v_buffer);
                    DBMS_OUTPUT.PUT_LINE('the length of buffer is '||length(v_buffer));
                     V_CUSTOMER_NAME := trim(substr(v_buffer, 1, 30));
                     DBMS_OUTPUT.PUT_LINE('Customer Name is '||V_CUSTOMER_NAME);
                     V_MANUFACTURER := trim(substr(v_buffer, 31, 40));
                     DBMS_OUTPUT.PUT_LINE('Manufacturer is '||V_MANUFACTURER);
                     V_PRODUCT_NAME := trim(substr(v_buffer, 71, 20));
                     DBMS_OUTPUT.PUT_LINE('Product Name is '||V_PRODUCT_NAME);
                     V_QUANTITY      := to_number(trim(substr(v_buffer, 91, 5)));
                     DBMS_OUTPUT.PUT_LINE('Quantity is '||V_QUANTITY);
                     V_REQ_SHIP_DATE     := to_date(trim(substr(v_buffer, 96, 20)), 'DD-MON-YYYY');
                     DBMS_OUTPUT.PUT_LINE('Requested Ship Date is '|| V_REQ_SHIP_DATE);
                    V_REQ_PRICE        :=nvl(substr( trim(v_buffer), 116, length(v_buffer)-116),0);
                    --DBMS_OUTPUT.PUT_LINE('Requested Price is1 '||substr(v_buffer, 116, 5));
                    DBMS_OUTPUT.PUT_LINE('The requested price is '||V_REQ_PRICE);
            V_LOG_FILE := UTL_FILE.FOPEN(FILE_PATH, 'LOG_FILE.dat', 'A');
                IF (V_QUANTITY > 0)
                 THEN
                 DBMS_OUTPUT.PUT_LINE('The quantity is '||V_QUANTITY);
                   SELECT COUNT (*)
                   INTO V_COUNT_CUST
                   FROM CONVERSION_CUSTOMERS
                   WHERE CUSTOMER_NAME = V_CUSTOMER_NAME;
                   DBMS_OUTPUT.PUT_LINE('The Customer count is '||V_COUNT_CUST);
                   IF(V_COUNT_CUST > 0)
                   THEN
                       SELECT COUNT(*)
                       INTO V_COUNT_PROD
                       FROM conversion_products
                       WHERE PRODUCT_NAME = V_PRODUCT_NAME;
                       DBMS_OUTPUT.PUT_LINE('The Product count is '||V_COUNT_PROD);
                      IF(V_COUNT_PROD >0)
                       THEN
                            INSERT INTO XXCTS_ORDER_DETAILS_STG VALUES (V_CUSTOMER_NAME, V_PRODUCT_NAME, V_MANUFACTURER, V_QUANTITY, V_REQ_SHIP_DATE, V_REQ_PRICE, 'ACTIVE', 'ORDER TAKEN');
                       ELSE
                            DBMS_OUTPUT.PUT_LINE('PRODUCT SHOULD BE VALID');
                            UTL_FILE.PUT_LINE(V_LOG_FILE, 'PRODUCT SHOULD BE VALID');
                       END IF;
                   ELSE
                      DBMS_OUTPUT.PUT_LINE('CUSTOMER SHOULD BE VALID');
                      UTL_FILE.PUT_LINE(V_LOG_FILE, 'CUSTOMER SHOULD BE VALID');
                   END IF;
                ELSE
                    DBMS_OUTPUT.PUT_LINE('QUANTITY SHOULD BE VALID');
                    UTL_FILE.PUT_LINE(V_LOG_FILE, 'QUANTITY SHOULD BE VALID');
                END IF;
                EXCEPTION
                WHEN NO_DATA_FOUND THEN
                    EXIT;
                END;
    END LOOP;
SELECT CUSTOMER_NAME, PRODUCT_NAME, MANUFACTURER, QUANTITY, REQUESTED_SHIP_DATE, REQUESTED_PRICE, STATUS,MESSAGE
BULK COLLECT
INTO L_ORDER_LINES
FROM XXCTS_ORDER_DETAILS_STG;
DBMS_OUTPUT.PUT_LINE('values inserted');
proc_conversion_api2(p_orderdetails=>L_ORDER_LINES);
END;
PROCEDURE proc_conversion_api2(p_orderdetails IN cts_order_details)
IS
V_AVL_QUANTITY CONVERSION_PRODUCTS.AVL_QUANTITY%TYPE;
V_REQ_SHIP_DATE DATE;
V_LIST_PRICE CONVERSION_PRODUCTS.LIST_PRICE%TYPE;
V_NET_PRICE CONVERSION_PRODUCTS.LIST_PRICE%TYPE;
V_NET CONVERSION_PRODUCTS.LIST_PRICE%TYPE;
V_EXTN_PRICE CONVERSION_PRODUCTS.LIST_PRICE%TYPE;
V_CUST_DISC CONVERSION_CUSTOMERS.DISCOUNT%TYPE;
V_CERT_DISC CONVERSION_CERTIFICATION.DISCOUNT%TYPE;
V_CUST_ID XXCTS_ORDER_DETAILS.CUSTOMER_ID%TYPE;
V_PROD_ID XXCTS_ORDER_DETAILS.PRODUCT_ID%TYPE;
V_DISC_PRICE CONVERSION_PRODUCTS.LIST_PRICE%TYPE;
V_DISC_NAME CONVERSION_CERTIFICATION.CERTIFICATION%TYPE;
V_TOTAL_DISC_AMT NUMBER;
V_TOTAL_DISC NUMBER;
V_LIMIT NUMBER;
BEGIN
    DBMS_OUTPUT.PUT_LINE('INSIDE API_2 BEGIN 1');
        FOR i IN p_orderdetails.FIRST..p_orderdetails.LAST
        LOOP
             BEGIN
            DBMS_OUTPUT.PUT_LINE('INSIDE API_2 BEGIN 2');
            SELECT PRODUCT_ID,AVL_QUANTITY,LIST_PRICE
            INTO V_PROD_ID,V_AVL_QUANTITY,V_LIST_PRICE
            FROM CONVERSION_PRODUCTS
            WHERE PRODUCT_NAME=p_orderdetails(i).PRODUCT_NAME;
            DBMS_OUTPUT.PUT_LINE('PRODUCT QUANTITY is '||V_PROD_ID);
            DBMS_OUTPUT.PUT_LINE('AVAILABLE QUANTITY is '||V_AVL_QUANTITY);
            DBMS_OUTPUT.PUT_LINE('LIST PRICE is '||V_LIST_PRICE);
            SELECT CUSTOMER_ID,NVL(DISCOUNT,0)
            INTO V_CUST_ID,V_CUST_DISC
            FROM CONVERSION_CUSTOMERS
            WHERE CUSTOMER_NAME=p_orderdetails(i).CUSTOMER_NAME;
            DBMS_OUTPUT.PUT_LINE('CUSTOMER ID is '||V_CUST_ID);
            DBMS_OUTPUT.PUT_LINE('CUSTOMER DISCOUNT IS '||V_CUST_DISC);
            SELECT A.DISCOUNT,A.CERTIFICATION
            INTO V_CERT_DISC,V_DISC_NAME
            FROM CONVERSION_CERTIFICATION A,CONVERSION_CUSTOMERS B
            WHERE A.CERTIFICATION=B.CERTIFICATION(+)
            AND B.CUSTOMER_NAME=p_orderdetails(i).CUSTOMER_NAME;
            DBMS_OUTPUT.PUT_LINE('CERTIFICATION DISCOUNT IS '||V_CERT_DISC);
            V_NET:=((V_LIST_PRICE)-(V_LIST_PRICE)*(V_CERT_DISC)/100);
            DBMS_OUTPUT.PUT_LINE('NET PRICE AFTER CERTIFICATION DISCOUNT IS '||V_NET);
            V_NET_PRICE:=((V_NET)-(V_NET)*(V_CUST_DISC)/100);
            DBMS_OUTPUT.PUT_LINE('NET PRICE AFTER COMPLETE DISCOUNT IS '||V_NET_PRICE);
            V_EXTN_PRICE:=(V_NET_PRICE)*(p_orderdetails(i).QUANTITY);
            DBMS_OUTPUT.PUT_LINE('EXTENDED PRICE IS '||V_EXTN_PRICE);
            V_TOTAL_DISC:=((V_CERT_DISC)/100+(V_CUST_DISC)/100);
            DBMS_OUTPUT.PUT_LINE('TOTAL DISCOUNT IS '|| V_TOTAL_DISC);
            V_TOTAL_DISC_AMT:=(V_LIST_PRICE)-(V_NET_PRICE);
            DBMS_OUTPUT.PUT_LINE('TOTAL DISCOUNT PRICE IS '|| V_TOTAL_DISC_AMT);
            SELECT MAX(A.LIMIT)
            INTO V_LIMIT
            FROM CONVERSION_CERTIFICATION A,CONVERSION_CUSTOMERS B
            WHERE A.CERTIFICATION=B.CERTIFICATION(+)
            AND B.CUSTOMER_NAME=p_orderdetails(i).CUSTOMER_NAME;
            IF p_orderdetails(i).QUANTITY<V_AVL_QUANTITY THEN
            INSERT INTO XXCTS_ORDER_DETAILS VALUES(SEQ_HEADER_ID.NEXTVAL,SEQ_LINE_ID.NEXTVAL,V_CUST_ID,V_PROD_ID,p_orderdetails(i).QUANTITY,p_orderdetails(i).REQUESTED_SHIP_DATE,p_orderdetails(i).REQUESTED_PRICE,V_LIST_PRICE,V_TOTAL_DISC,V_NET_PRICE,V_EXTN_PRICE,'QTY HOLD','REQ QNTY LESS THAN AVL QTY',SYSDATE);
            INSERT INTO xxcts_order_discounts VALUES(SEQ_HEADER_ID.NEXTVAL,SEQ_LINE_ID.NEXTVAL,SEQ_DISCOUNT_ID.NEXTVAL,V_DISC_NAME,V_TOTAL_DISC_AMT);
            END IF;
            IF p_orderdetails(i).REQUESTED_SHIP_DATE<SYSDATE THEN
            INSERT INTO XXCTS_ORDER_DETAILS VALUES(SEQ_HEADER_ID.NEXTVAL,SEQ_LINE_ID.NEXTVAL,V_CUST_ID,V_PROD_ID,p_orderdetails(i).QUANTITY,p_orderdetails(i).REQUESTED_SHIP_DATE,p_orderdetails(i).REQUESTED_PRICE,V_LIST_PRICE,V_TOTAL_DISC,V_NET_PRICE,V_EXTN_PRICE,'DATE HOLD','SHIPDATE CANNOT BE LESS THAN CURR DATE',SYSDATE);
            INSERT INTO xxcts_order_discounts VALUES(SEQ_HEADER_ID.NEXTVAL,SEQ_LINE_ID.NEXTVAL,SEQ_DISCOUNT_ID.NEXTVAL,V_DISC_NAME,V_TOTAL_DISC_AMT);
            END IF;
            IF V_NET_PRICE>p_orderdetails(i).REQUESTED_PRICE THEN
            INSERT INTO XXCTS_ORDER_DETAILS VALUES(SEQ_HEADER_ID.NEXTVAL,SEQ_LINE_ID.NEXTVAL,V_CUST_ID,V_PROD_ID,p_orderdetails(i).QUANTITY,p_orderdetails(i).REQUESTED_SHIP_DATE,p_orderdetails(i).REQUESTED_PRICE,V_LIST_PRICE,V_TOTAL_DISC,V_NET_PRICE,V_EXTN_PRICE,'PRICE HOLD','NET PRICE CANNOT BE MORE THAN REQ PRICE',SYSDATE);
            INSERT INTO xxcts_order_discounts VALUES(SEQ_HEADER_ID.NEXTVAL,SEQ_LINE_ID.NEXTVAL,SEQ_DISCOUNT_ID.NEXTVAL,V_DISC_NAME,V_TOTAL_DISC_AMT);
            END IF;
           /* IF V_LIMIT<p_orderdetails(i).REQUESTED_PRICE THEN
            INSERT INTO XXCTS_ORDER_DETAILS VALUES(SEQ_HEADER_ID.NEXTVAL,SEQ_LINE_ID.NEXTVAL,V_CUST_ID,V_PROD_ID,p_orderdetails(i).QUANTITY,p_orderdetails(i).REQUESTED_SHIP_DATE,p_orderdetails(i).REQUESTED_PRICE,V_LIST_PRICE,V_TOTAL_DISC,V_NET_PRICE,V_EXTN_PRICE,'ORDER LIMIT HOLD','PRICE CANNOT EXCEED ORDER LIMIT',SYSDATE);
            INSERT INTO xxcts_order_discounts VALUES(SEQ_HEADER_ID.NEXTVAL,SEQ_LINE_ID.NEXTVAL,SEQ_DISCOUNT_ID.NEXTVAL,V_DISC_NAME,V_TOTAL_DISC_AMT);
            END IF;*/
            EXCEPTION
            WHEN NO_DATA_FOUND THEN
            DBMS_OUTPUT.PUT_LINE(' INSIDE EXCEPTION BLOCK');
            END;
        END LOOP;
END;
end conv_api_pkg;
/the pl/sql block to invoke the the procedure :
declare
begin
PROC_CONVERSION_API('/usr/tmp' ,'Walmart_Orders_062908.dat');
end;please let me know what is wrong in the program.
Thanks
Anvesh

Hi Walter
Yes 'Inside begin 1' and 'Inside begin 2' were printed.Please find the the DBMS_OUTPUT statements that were printed.
Inside begin 1
Inside begin 1.1
Inside begin 2
Inside begin 2.1
the buffer is BESTBUY                       SONY ERICSSON                           W580i               25   1-AUG-2008          50
the length of buffer is 118
Customer Name is BESTBUY
Manufacturer is SONY ERICSSON
Product Name is W580i
Quantity is 25
Requested Ship Date is 01-AUG-08
The requested price is 50
The quantity is 25
The Customer count is 1
The Product count is 0
PRODUCT SHOULD BE VALID
Inside begin 2
Inside begin 2.1
the buffer is BESTBUY                       SAMSUNG                                 BLACKJACK           50   15-JUL-2008         150
the length of buffer is 119
Customer Name is BESTBUY
Manufacturer is SAMSUNG
Product Name is BLACKJACK
Quantity is 50
Requested Ship Date is 15-JUL-08
The requested price is 150
The quantity is 50
The Customer count is 1
The Product count is 1
Inside begin 2
Inside begin 2.1
the buffer is BESTBUY                       APPLE                                   IPHONE 4GB          50   15-JUL-2008
the length of buffer is 116
Customer Name is BESTBUY
Manufacturer is APPLE
Product Name is IPHONE 4GB
Quantity is 50
Requested Ship Date is 15-JUL-08
The requested price is 0
The quantity is 50
The Customer count is 1
The Product count is 1
Inside begin 2
Inside begin 2.1
the buffer is BESTBUY                       ATT                                     TILT                100 15-JUN-2008
the length of buffer is 116
Customer Name is BESTBUY
Manufacturer is ATT
Product Name is TILT
Quantity is 100
Requested Ship Date is 15-JUN-08
The requested price is 0
The quantity is 100
The Customer count is 1
The Product count is 1
Inside begin 2
Inside begin 2.1
the buffer is BESTBUY                       NOKIA                                   N73                 50   15-JUL-2008         200
the length of buffer is 118
Customer Name is BESTBUY
Manufacturer is NOKIA
Product Name is N73
Quantity is 50
Requested Ship Date is 15-JUL-08
The requested price is 20
The quantity is 50
The Customer count is 1
The Product count is 0
PRODUCT SHOULD BE VALID
Inside begin 2In the first procedure I am trying to read the data from a flat file and store it in a table.Here is the sample data from the flat file.
BESTBUY                       SONY ERICSSON                           W580i               25   1-AUG-2008          50
BESTBUY                       SAMSUNG                                 BLACKJACK           50   15-JUL-2008         150
BESTBUY                       APPLE                                   IPHONE 4GB          50   15-JUL-2008
BESTBUY                       ATT                                     TILT                100 15-JUN-2008
BESTBUY                       NOKIA                                   N73                 50   15-JUL-2008         200When tried to execute the second procedure independently using the PL/SQL block,the tables in second procedure were populated and the DBMS_Output statements were also displayed.I have made use of the same query in that case
Thanks
Anvesh
Edited by: Anvesh Reddy on Dec 23, 2008 12:40 PM

How can i create a Global Temporary Table inside a Stored Procedure....

Hi...
I need to create a Global Temporary Table inside a Stored
Procedure....
I have no idea how to do that....
Please....if u can send me a sample, send to me....
Thanks a lot

To create a global temporary table inside a stored procedure,
the minimal syntax would be:
CREATE OR REPLACE PROCEDURE procedure_name
AS
BEGIN
EXECUTE IMMEDIATE 'CREATE GLOBAL TEMPORARY TABLE table_name'
|| '(column_name NUMBER)';
END procedure_name;
As Todd stated, it would probably be better to create the global
temporary table outside of the procedure:
SQL> CREATE GLOBAL TEMPORARY TABLE table_name
2 (column_name NUMBER);
Table created.
You can also specify things like ON COMMIT PRESERVE ROWS or ON
COMMIT DELETE ROWS.
It may be that there is something else, like a PL/SQL table of
records or a cursor, that would suit your needs better. It is
difficult to guess without knowing what you want to do with it.

I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

I can't say personally since I never used AW, but see if these articles help:
http://www.macworld.com/article/1166370/open_old_docs.html
http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

Using SET DATEFIRST inside a function to call into a view

Hi,
I need to use the statement SET DATEFIRST inside a function. This operation is not available, but I need to use this command into a function to call inside a view.
How can I solve this issue?
Thanks

Eventually you will learn 2 very important things. First, the term "working day" has no absolute definition and varies by country, organization, culture, etc. Second is that circumstances will occur that change what should be considered a working
day to a non-working day (or vice versa). While you might attempt to create logic that "forecasts" whether a given date in the future is a working day, you cannot apply that logic to past dates. The best solution is to create a calendar table for
this purpose - some forum/internet searching will find many different variations.

View inside a stroed Procedure

Can we create a view inside a stored procedure ???

For the code you gave me in the morning . I have ou it below again for your reference
DECLARE @myTable TABLE (myDate DATE, PressureValue SMALLINT)
INSERT INTO @myTable
SELECT '12/19/2014', 250 UNION ALL
SELECT '12/20/2014', 100 UNION ALL
SELECT '12/21/2014', 150 UNION ALL
SELECT '12/20/2014', 200
;With CTE
As
SELECT
,Row_Number() Over(ORDER BY myDate) As RowNo
FROM
@myTable
SELECT
FROM
CTE As MainQry
CROSS APPLY (SELECT AVG(SubQry.PressureValue) AVGPressureValue FROM CTE As SubQry WHERE SubQry.RowNo >= MainQry.RowNo - 3 AND SubQry.RowNo <= MainQry.RowNo) As AVGValue
The requirement is to create a view with the averages..how to do that ???
can a CTE be create on top of the view????

SQL Server Free Text Search with multiple search words inside a stored procedure

I am trying to do a free text search. basically the search string is being sent to a stored procedure where it executes the free text search and returns the result.
If I search for red
flag, I want to return the results that matches both red and flag text.
Below is the query I use to return the results.
select * from customer where FREETEXT (*, '"RED" and "flag"')
This doesn't give me the desired result. Instead this one give the desired result.
select * from customer where FREETEXT (*, 'RED') AND FREETEXT (, 'FLAG')
My problem is since it's inside a stored procedure, I will not be able to create the second query where clause. I thought both query should return the same result. Am I doing something wrong here?

I am moving it to Search.
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Query to get list of linked server tables referenced inside a stored procedure

Hi,
SQL Server 2005 sp4
I have a requirement to get list of linked server tables referenced insider a stored procedure
Ex:
Databases DB1 DB2
Tables: T1 T2
Use DB1
Go
Create proc P1
begin
select * from T1
select * from DB2.dbo.T2
end
I am looking for a query which can return a result with output as below. sp_depends is not helping here as it does not work for cross DB objects, any other thoughts.
Tables
T1,
DB2.dbo.T2

On SQL 2005, you will have to do it manually.
On SQL 2008 or later, you could have used sys.sql_expression_dependencies.
Erland Sommarskog, SQL Server MVP, [email protected]

How to implement a CURSOR & looping inside ODI 11g Procedure

Hello All,
I have requirement where in my source data has multiple rows for an Item number with different Product numbers, I have to concatenate all the Product Numbers of speciifc Item number and update it into another column on the same table. How can we achive this inside ODI 11g? Can we use ODI Procedure? Can we implement a Cursor inside the ODI procedure to group the records based on Item Number and use a loop to concatenate as we do it inside a normal PL SQL procedure, if so, please let me know?
Ex source:
Column1,Column2, Column3
Item01, Product01, null
Item01, Product02, null
Item01, Product03, null
Item02, Product01, null
Item02, Product08, null
need to convert/update this source data to
Column1,Column2, Column3
Item01, Product01, Product01 Product02 Product03
Item01, Product02, Product01 Product02 Product03
Item01, Product03, Product01 Product02 Product03
Item02, Product01, Product01 Product08
Item02, Product08, Product01 Product08
Regards,
MRM

Hi Thanks for the reply,
I replaced the code for column3 mapping to
CASE WHEN POC_DECODE.SOURCE IS NOT NULL THEN
SELECT LISTAGG(POC_DECODE.TARGET,'')
WITHIN GROUP ( ORDER BY POC_DECODE.SOURCE)
FROM TABLE POC_DECODE A WHERE A.SOURCE=POC_DECODE.SOURCE
END
I get the below error:
ODI-1228: Task TEST_POC_CONCATE (Integration) fails on the target ORACLE connection ORACLE_ORMS_DS.
Caused By: java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:953)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1224)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3467)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3218)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java:1785)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2805)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:619)
Please help...

Set implicit_transactions inside of a procedure

Similar Messages

Maybe you are looking for