Set IP Affinity in a Server Cluster
I have a SharePoint server with two web front ends.
I've been informed that I need to set the two servers to IP affinity or 'session stickyness' in TMG to resolve an issue I am having with certain web parts. I think I have set this up but is there anyway I can test if it is working correctly?
Hi,
According to your description, it seems that you have grouped the two web servers into a farm, right? In these scenario, TMG treats all the Web servers in the farm as a single entity and use session affinity (cookie-based load balancing) or IP address affinity
(source IP address-based load balancing) to implement the load balancing algorithm. In your case, you can choose source-IP based load balancing when specify server farm. You can publish a SharePoint site in a server farm by using the SharePoint Site Publishing
Rule Wizard, then you can access the site and check the TMG real time logging to see if load balancing is working as you expected.
More information:
server farms
Best regards,
Susie
Similar Messages
-
Listener service not start automatically after reboot in Win2K server Clust
Hi all,
I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
Started with pid=1108
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
The service can be manually start.
Any suggestion?
Frank.The command to start automatically the listener is :
lsnrctl start
check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
check the IP address or host name
Joel Pérez -
Virtualised Multi-Instance SQL Server Cluster - Processor Resource Management
Hi - We're in the process of implementing a multi-instance SQL 2014 guest cluster on Windows 2012 R2. To our dismay, it seems that Windows System Resource Manager (WSRM) is deprecated in Windows 2012 R2, so we're now stuck for how best to manage CPU usage
between SQL instances....
As far as I can see, I'm left with two options, but both of these have problems:
1) Use SQL Processor affinity within the guest cluster, with each SQL instance assigned to dedicated v-CPU. However, I'm not certain that setting SQL Processor affinity within a VM will actually have the desired affect!?..
- When there is physical CPU capacity available, I'd hope Hyper-V would provide it to whichever v-CPU is demanding it.
- When VM processor demand exceeds the physical CPU capacity, I'd hope the SQL instances would receive a proportion of the physical CPU time according to the number of v-CPU(s) assigned through the affinity settings.
2) Use a VM (actually 2, because its a 2-node guest cluster) per SQL instance!.. This is not ideal, as we need multiple SQL instances and it would result in have an administrative and performance overhead
Does anyone have any information or thoughts on this? How can we manage a virtualised multi-instance SQL deployment now that WSRM has been deprecated? Help me please!I'm not sure what are the requirements for each of the 2 VMs in in the SQL guest cluster.
I'm assuming the guest cluster resides on a Hyper-V CSV with at least 2 Hyper-V hosts, and the 2 VMs are configured with Anti-affinity to ensure they never reside on the same Hyper-V host.
I've been able to configure CPU resources to VMs from the standard controls in Hyper-V Manager:
See this blog post
What edition of SQL 2014 you're using?
This matters because of these limitations.
Also consider running SQL Server with Hyper-V Dynamic Memory - see Best Practices
and Considerations
Hyper-V performance tuning - CPU
Hyper-V 2012 Best Practices
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx -
I construct a failover cluster(file server,AP module) for sharing files by WSS 2012,and I want to use the shadow copies to backup my data,but when making a shadow copies on the volume which is added to the cluster(not the CSV,just add
it to the cluster and use it to share files,it plays the role of file server),there are some errors occured, these errors result in the shadow copies failed,error likes the following pictures:
1: the disk F is added to the cluster,first I make the shadow copies by click the right key of mouse on the disk F,and chouse the configeration shadow copies,and click the settings, then click the schedule , and I wait just a few seconds, the error is appeared,like
this picture 1, the wait operation timed out,and then ,
I click the schedule button once again,a different error occured,like the following picture," the object already exists",if i don't set the schedule at first ,use the default shedule,and click the enable button also the same error must
accure
but the only diffrence is that, a shadow copy time point is created, also ,you can make the shadow copies by click " create now", that is creating the shadow copies manually. Although it can succesfully make the shadow copies, but when I select
a time point to revert, error occured, "A volume that contains operating system files or resides on a cluster shared disk cannot be reverted"
In a word,all the errors above make the shadow copies by schedulling failed,except making the shadow copies manually,but what makes me confused is that I have ever maked the shadow copies succesfully by schedul a policy,I don't know what makes it succesful,
it's small probability, most of time ,it's failed.No matter what kind of situation, revert must be failed.
I'm sorry for my pool english , it's the first time for me getting help in forum by english ,I don't know if I descripe my question clearly, also ,other method like the link
http://technet.microsoft.com/en-us/library/cc784118(v=ws.10).aspx I have tried,but the same errors occured.Can anyone tell me How can I make the shadow copies in File Server
cluster(AP module)?And I make a mistake in operating? Looking forward for your reply.Thanks!Hi,
Please check the following 2 places:
HKEY_LOCAL_MACHINE\Cluster\Tasks
C:\Windows\System32\Tasks
First please compare permission settings of the folder C:\Windows\System32\Tasks with a working computer. Correct permission settings if anything wrong. Specifically, confirm you current account do have permission on this folder.
As it said "object already exists", find the schedules you created before, backup and delete all these schedules in both registry key and folder.
Then test to create a new schedule to see if issue still exists.
Meanwhile what kind of storage device you are using? The issue could occur on specific storage device, so test to enable shadow copy on a local disk to see if that will work.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]
Thank you for you reply.On the local volume,all of these errors will not occur, but the volume in the file server cluser.There is no value in HKEY_LOCAL_MACHINE\Cluster\Tasks. On local volume, everything goes well about the shadow copy, so I do not
think something is wrong about the permission settings of the folder C:\Windows\System32\Tasks.Storage device is a SAN,we use RAID6 and provide the LUNs to the NAS engine, and the make the volume on these LUNs, Is Angthing wrong? Hope for you
reply~~ -
Server/Cluster is incorrectly configured. Please reconfigure your Cluster.
Dear All,
We are facing the below issue while opening the reports from workspace/Smartview.
Server/Cluster is incorrectly configured. Please reconfigure your Cluster or Server connection.<BR>Server/Cluster is incorrectly configured. Please reconfigure your Cluster or Server connection
The FRLogging log is as below.Kindly let us know the solution.
[2012-10-16T11:12:47.168+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000000 HrDatasourceManagerImpl fromXml
[2012-10-16T11:12:47.169+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000011 HrDatasourceManagerImpl getDatasource
[2012-10-16T11:14:06.723+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000066 DesignerManager getPersistentObject
[2012-10-16T11:14:06.738+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000000 HrDatasourceManagerImpl fromXml
[2012-10-16T11:14:06.738+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000014 HrDatasourceManagerImpl getDatasource
[2012-10-16T11:14:06.840+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000000 HrDatasourceManagerImpl fromXml
[2012-10-16T11:14:06.841+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000014 HrDatasourceManagerImpl getDatasource
[2012-10-16T11:14:06.851+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000001 HrDatasourceManagerImpl fromXml
[2012-10-16T11:14:06.851+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000009 HrDatasourceManagerImpl getDatasource
[2012-10-16T11:14:06.862+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000000 HrDatasourceManagerImpl fromXml
[2012-10-16T11:14:06.862+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000008 HrDatasourceManagerImpl getDatasource
[2012-10-16T11:14:06.981+05:30] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.client.HRAdmHelper] [SRC_METHOD: openConnection] [[
com.hyperion.ap.APException: [0] [1033] Native: -2147217085 Error Reference Number: {B4B11526-7EA5-492A-9BB9-C17E33676DF2}<BR>Num: 0x80041143;Type: 1;DTime: 10/16/2012 11:14:06 AM;Svr: CPNQHYPNAPZP02;File: CHsxClient.cpp;Line: 809;Ver: 11.1.2.1.000.3082;DStr: CHsxClient::InternalCreateObjectOnCluster: cluster = HFMProdCluster, Num Servers = 0,;<BR>Num: 0x80041143;Type: 1;DTime: 10/16/2012 11:14:06 AM;Svr: CPNQHYPNAPZP02;File: CHsxClient.cpp;Line: 810;Ver: 11.1.2.1.000.3082;DStr: CHsxClient::InternalCreateObjectOnCluster: cluster = HFMProdCluster, Num Servers = 0,;<BR>Num: 0x80041143;Type: 0;DTime: 10/16/2012 11:14:06 AM;Svr: CPNQHYPNAPZP02;File: CHsxClient.cpp;Line: 3687;Ver: 11.1.2.1.000.3082;<BR>Num: 0x80041143;Type: 0;DTime: 10/16/2012 11:14:06 AM;Svr: CPNQHYPNAPZP02;File: HsvADMDriverSessionInternal.cpp;Line: 305;Ver: 11.1.2.1.000.3082;
at com.hyperion.ap.adm.HssConnRemote.HssConnOpenConnection(HssConnRemote.java:864)
at sun.reflect.GeneratedMethodAccessor1048.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:305)
at sun.rmi.transport.Transport$1.run(Transport.java:160)
at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:909)
at java.lang.Thread.run(Thread.java:619)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:255)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:233)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:142)
at com.hyperion.ap.adm.HssConnRemote_Stub.HssConnOpenConnection(Unknown Source)
at com.hyperion.ap.adm.HssConnSessionRemote.HssConnOpenConnection(HssConnSessionRemote.java:991)
at com.hyperion.ap.adm.HssConnSessionWrapper.HssConnOpenConnection(HssConnSessionWrapper.java:1484)
at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:912)
at com.hyperion.ap.adm.HssAdm.internal_openConnection(HssAdm.java:1789)
at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:974)
at com.hyperion.reporting.client.HRAdmHelper.openConnection(Unknown Source)
at com.hyperion.reporting.client.HRAdmHelper.openConnection(Unknown Source)
at com.hyperion.reporting.client.DesignerManager.getDatasourceConnection(Unknown Source)
at com.hyperion.reporting.javacom.DesignerManagerComImpl.getDatasourceConnection(Unknown Source)
Regards,
SuboorSet up the HFM cluster on the FR Studio machine.
1. Go to Start > All Programs > Hyperion >Financial Management >Server and Web Configuration
2. Go to the Server/Cluster Registration tab.
3. Enter the computer name of the HFM server used to get cluster information or the name of the single server if using a non-clustered environment. The HFM server needs to be referenced exactly as it is on the HFM server (hostname/IP/FQDN/clustername, as well as case-sensitivity for any letters).
4. Apply and OK.
5. Restart FR Studio.
Note: if HFM client is not on the FR Studio box, it will need to be installed prior to set up of the HFM cluster as listed above. -
Deploying OracleAS Single Sign-On Server Cluster setup with a Proxy Server
I have a question regarding setting up a OracleAS Single Sign-On Server in a cluster mode along with a Apache Proxy Server.
Step1 - I'm planning to install OracleAS Single Sign-On Server on two nodes sso1.oracle.com and sso2.oracle.com in a Cluster. Both the nodes in the cluster accesed via Load balancer i.e sso.oracle.com.
Step2 - Then I'm planning to setup two Apache Servers as Proxy Server i.e apache1.oracle.com and apache2.oracle.com. These two apache servers are accessed via Load balancer i.e apache.oracle.com
The question I have is
1)while setting up OracleAS Single Sign-On cluster I would provide Load balancer host i.e sso.oracle.com as part of the install. So that all the user requests coming to sso1.oracle.com/sso2.oracle.com get redirected back to Load balancer.
2)But as part of the Apache Server proxy setup I am also supposed to redirect from SSO server to apache.oracle.com
But using ssocfg.sh I can only provide either sso.oracle.com or apache.oracle.com NOT BOTH.
In this case what I should
1) avoid redirecting to sso.oracle.com instead redirect only to apache server OR are there any other methods to configure.
I have above setup working fine in DEV environment, where there is only one sso server and one apache proxy server. Problem really comes when I go for setting OSSO server as a cluster in this case I have to redirect to load balancer as well as proxy server?why not using webcacheclustering between the apache and the 2 sso's?
-
Creating 10gAS report server cluster
Please guide us to create 10g Report Server Cluster
version 10.1.2.0.2
platform RHEL-4
Regards,
AchyotHi ,
There is no need for setting up a common mapped drive as cache. You can specify their own individual cache directories
* Server does duplicated job check in this server first
* If it did not find, sends request to all servers in the cluster
* If a server in the cluster has duplicated job, the job will be sent to that server to fetch the cached output
So there is not need for common mapped cache directory.
I read the note you mentioned. In the common settings required for cluster-members mentioned there, I could not find "cachedir" (If that is why you put a common directory) . Some settings could be different in cluster members.
Thanks
Ratheesh
The statements and opinions expressed here are my own and not that of my employer. -
JMS Server targeted to Server cluster
Hi , Can JMS Server be targeted to Server Cluster? Are there any
architectural best practices for this?Thanks Tom.
<Tom Barnes> wrote in message news:[email protected]...
There's no underlying machinery (code) that supports targeting a JMS server
to a cluster.
The targeting problem can actually get fairly involved - for a variety of
reasons, I tend to recommend the following cookie cutter approach.
This is a cut-and-paste from my notes:
(1) Create a custom WL store on each server, and target it to a migratable
target (most of the time you can use the default migratable target that each
server provides).
(2) Target the JMS servers to a migratable target each, the same MT as the
store (don't worry, the JMS server won't wander to a different server
unless you configure the MT to allow this!)
(3) Target jms configuration system modules to the cluster (that's it! - not
to anything else)
(4) Create one subdeployment per module (and only one), populate the
subdeployment only with JMS servers from step (2) above.
(5) When targeting destinations always use advanced targeting to target
destinations to the subdeployment from above - not the 'default target'.
If you have both non-distributed and distributed destinations, use two
different JMS modules. (The idea is to keep things simple to understand -
each module should yield the same targeting solution for all of its
component resources. Default targetting can be problematic - it is far too
easy for destination members to end up on JMS servers that you don't want
them on.).
(6) When targeting a CF you have two options (A) use advanced targeting to
target it to the subdeployment (for access by applications that are remote
to the cluster) or (B) don't target it all (this will cause it to use the
module target, which if you recall, we just set to the cluster, (for access
by applications that run on a server within the cluster). The choice
actually depends on how you plan to use the CF - use (B) for apps running on
servers within the cluster, and (A) for apps running remote to the cluster.
See the otherwise-largely-outdated JMS Performance Guide for the reasoning.
It may be that you don't have to use migratable targets, as you may not have
a use for "migration" at the moment - but it'll help in the future if you
ever plan to use the migration features.
Tom -
Error Registering server cluster on HFM web server
Hi,
When i am trying to register server cluster , configuration fails and i get following error in EPMWindowsconfig.log
(Wed Apr 06 17:57:48 2011) Starting RegisterServer
(Wed Apr 06 17:57:53 2011) Failed to register server: Access is denied. Line:3809 File: .\CEPMWindowsConfig.cpp Error code:0x80070005 Error: Access is denied.
(Wed Apr 06 17:57:53 2011) Failed to register server SERVERNAME: IDispatch error #1553
Please let me know if any one has solution for the above issue.
Thanks,
BhargavHi,
I Don't know your version
here is a detailed way to do the same:
Hyperion Financial Management - Version: 9.2.1.0.00 and later [Release: 9.2 and later ]
Error
Failed to register server: Access is denied.
Line:3809 File: .\CEPMWindowsConfig.cpp Error code:0x80070005
Error: Access is denied.
Cause
Windows Server Group Policy settings for DCOM block the HFM registration to Shared Services.
Solution
HFM requires full access for ANONYMOUS LOGON in DCOM Limits Configuration.
This can be set up as follows:
Open DCOM configuration console: run 'dcomcnfg' from Run or Command Prompt
Open up Component Services / Computers
Right Click on My Computer and choose Properties
In the Launch and Activation Permissions, click the Edit Limits button
This button may be disabled using Windows Security Policy. To enable this button the following Windows registry keys must be removed:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\DCOM\MachineAccessRestriction
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\DCOM\MachineLaunchRestriction
Once these keys are removed and the system restarted you can use the above steps to add ANONYMOUS LOGON in the Edit Limits section. Once this is done, open Configuration Utility and register HFM to Shared Services.
Follow step by step,
tell me if it doesn't work
J -
Is it possible to run a server cluster with Mavericks?
Is it possible to run a server cluster, like using XGrid, but with Mavericks? I have a Mac Mini server and an older iMac lying around that I want to put to good use. If so, what software would I need and how should I set it up? Will I be able to link the 2 computers over Wifi or must it be Ethernet?
Sadly Apple no longer provide Xgrid for clustering it was last available with Lion aka. 10.7.x.
For any equivalent clustering capability you are either going to have to use an open-source Linux originated clustering solution like Slurm, Moab, or Beowulf. Then you have to applications written to be compatible with such solutions. This was the beauty of Xgrid in that it provided a framework that Mac applications could be compatible with.
Note: Clustering is not the same thing as a Storage Area Network. It is still possible to build a SAN using Macs even in Mavericks and Apple still support Xsan for this.
With regards to using WiFi or Ethernet, both would work but it will depend on how much data needs to be transferred (per second) as to wether WiFi would be up to the job, some tasks require lots of data to be transferred other tasks e.g. BitCoin mining do not.
Apple did come up with another framework called Grand Central Dispatch. In theory that might be extended to work in a cluster. However while GCD is now open-source I get the impression it is also abandoned by Apple See https://libdispatch.macosforge.org -
How do I set up a local testing server?
Hey again everyone. I am trying to figure out how to set up a local testing server. I've read a couple different tutorials online and i still can't figure it out. I added a new server, named it test server, I'm connecting using local/network, my server folder is C:\Users\Jake\Website\testfolder, and my web URL is http://localhost/. My server model is PHP/MySQL.
My site's root folder is C:\Users\Jake\Website\. I have also downloaded XXAMP. It downloaded and that was it though, I'm not sure if I need to apply it somehow to Dreamweaver. When I try to preview my pages I get a message that asks me if I want to update copy on testing server. If I choose yes, another message comes up and asks me if I want to put dependent files. Whether I choose yes or no it just says IE cannot display the web page.
Any help would be appreciated, thanks!Site Name: PHP Test Site
Local Site Folder: C:\xampp\htdocs\php_test\
Server Name: Local Testing
Connect Using: Local/Network
Server Folder: C:\xampp\htdocs\php_test
Default Images Folder: C:\xampp\htdocs\php_test\Images\
Web URL: http://localhost/php_test/Server Model: PHP MySQL
Is that everything you need to know? Note that I do not have a remote testing site set up yet. -
Is there any way to create a VMvmare server cluster?
Hi,
I have two machines which don't support install ESXi, these machines are running centos 5 with no X and I installed vmware server 2.0.
My question is, is there any way to create a vmware server cluster like is possible create in ESX?
I know in ESX once you create a cluster, the resources are increased since resources are added. Is there any way to do same thing with vmware server 2.0?
Also is there any other option for my machines, I don't want to install X since the machines don't have much resource.
Thanks in advance.Welcome to the COmmunit - With VMware server each environment functions independently and there is no way to pool resources as you can with a DRS cluster - and remembering even in a DRS cluster the VMs swill only run on a single host at a time as they would in VMware Server machines/
Also just because it is not suppported does not mean you will not be able to create a VM with an unsupported OS - -
How to set up SAPconnect with email server
Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
PratikHi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra -
AD ignoring PoSiXGroup Permissions set on 10.4.11 Server
I have an Xserve running 10.4.11 which is joined to AD and uses the AD's kerberos for authentication / single sign-on. The file shares are hosted on a RAID volume connected to the Xserve. Groups are created in OD and populated with the AD users.
Problem i have is as follows. Around a week ago, AFP seemed to screw up and freeze the Xserve. End result was an attempted restart which locked, forced shut down and cold boot.
Since then, kerberos just seems to ignore any Group permissions that are set. Tried unbinding / rebinding server, deleting group, creating groups and shares from scratch, overwriting Kerberos config, checked that services are pointed to the right place etc.
Any suggestions?Oops, wrong place - can a moderator please move? Ta
-
Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik
Maybe you are looking for
-
My Ipod shuffle NOW thinks it has a 298.1 Gb storage capacity. Help, plz.
Good afternoon, I have a 512 MB Ipod Shuffle, that I have used successsfully for 9 months without a single glitch, until now. I'm using itunes 6.0.4.2, and the ipod shuffle is running software version 2006 03-23. I have a Dell PC running Windows XP P
-
Streaming iTunes from Mac to Mac
First, a Happy New Year to you all! I'm not sure if this is asked before, I couln't find a post. This is the thing: One of my favorite things to do on my Mac is to stream music from an iMac to my Airport Express with connected speakers. Now I wonder
-
HT1386 Questions on syncing Iphone to Itunes. It erased my contacts! Help!
My daughter tried to sync her new 8gb Iphone 4 to Itunes but there was too much data and somehow it erased all of her contacts and text messages. And installed zero music. We tried to restore it back but it was not successfull. Can anyone help wit
-
Weak connection speed on Mac vs. PC
Hi. My MBP 17" which is a year old has since day one been having problems with download/upload speeds compared to my old PC. When I put them both up for a test on my 30/30 mbit connection I get the following results: Wired PC: 3,9 MB/s download - 3,5
-
I downloaded the free trial of Final Cut Pro X. It has expired, and I am trying to pay for the app now, but I keep getting a message saying "please contact I-tunes support to complete this transaction". Then another message comes up saying "We coul