Set location from ODBC to qry

Hi,
The report I want to change is based on ODBC tables. I want to change the report based on a qeury, and cannot find a way. Do I have to create from scratch?
Any advise will be appreciated.

Explain what a query is? Are you using a command object? If so then currently your only option is to re-build the report. CR has no way of mapping from or too a Command object due to the vast variations in SQL syntax that can be used.
Thank you
Don
Moved to Database Connectivity Forum
Edited by: Don Williams on Oct 22, 2009 2:27 PM

Similar Messages

Setting Up an ODBC Data Source in Windows XP for PostgreSQL Unicode

Can someone help me setup an ODBC data source for a PostgreSQL Unicode database?
1. Under which tab(s) should I setup the Data Source: User DSN, System DSN, File DSN?
2. The check boxes on Advanced Options Pages 1 and 2, which should be checked?
I have Crystal Report XI, Windows XP, and PostgreSQL Unicode Version 08.1.0100.
Thanks!
Glynn

Here it is, there is an issue with our Search functionality with the new SDN:
Symptom
When setting location on a Crystal Reports XI Report using the Progress OpenEdge ODBC Driver in Crystal Reports 2008 or Crystal Reports 2011 get “Some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.”
Environment
Crystal Reports 2008 or 2011
Progress OpenEdge ODBC Driver
Reproducing the Issue
Open a Crystal Report created in CR XI Report using the Progress OpenEdge ODBC Driver in Crystal Reports 2008 or 2011
Set location to a new ODBC Data Source
Get error "some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.”
Cause
Crystal Reports XI only creates aliases for tables with special characters or duplicate names.
Crystal Reports 2008 introduces a change which requires aliases for all tables.
Aliases are not created when doing a Set Location on the whole data source.
If a Customer has hundreds of reports they cannot set location of each table and fix the aliases.
Resolution
Upgrade to Crystal Reports 2011 Support Pack 02 or higher
Under registry key [HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\Database\ODBC] create string UseTableNameAsAlias and set it to PGPRO1019.DLL, PGOE1022.DLL. Registry file is attached.
Keywords
Set Location
Progress ODBC
Crystal Reports 2008 2011

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

I've lost my iPhone 4... How can I find it when the device is offline when using "find my iPhone app"????? Any way of getting a location from it????

I've lost my iPhone 4... How can I find it when the device is off linesmen using "find my iPhone app"????? Any way of getting a location from it?????

No. It must be online in order to locate it.
What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Get Siri to set location reminders (using multiple reminder lists)

I found a way to get Siri to set location reminders using multiple reminder lists (but you can just use one list too):
First make additional lists in the reminder app: click list button (the lines on the left) > edit > create new list > done. Make as many as you want. I have grocery, home, personal, business, family.
Let's say you want a reminder to pick up apples when you get to the apple store. You must add the location in your contacts to your name in contacts.
Do the following:
In maps app find the location with search.
Tap the blue arrow > Add to contacts > Add to existing contact
Choose your name in contacts. It will be added under your address for home or work so you will need to edit it:
Click Edit.
Click on the small label on the left of the new address - it will just say "address"
Scroll to bottom of page and click on Create custom label
Enter the location name like "Apple Store". Click Done.
Important Note: You will need to delete the url it adds under your home url section and maybe other things it messes up with the new contact info instead of yours - so check all the fields each time you do this.
To make a location based reminder using a specific list you must open that list yourself - Siri will not open it for you.
Example:
Open grocery list yourself in the reminders app
Tell Siri something like: "remind me to pick up apples" (Do not mention the location yet - if you do it will not work)
Siri will ask: "When should I remind you?"
Say: "When I get to the apple store"
Siri will say she will remind you and you will see the location reminder in the grocery list.
This is how it works for me but if you know an easier way let me know! This is beta so I'm sure it will get easier.

I have one thing to add. You don't have to open the list manually. Tell Siri: "Add to my <listname> list". For example, if you have a list named "Work", tell Siri: "Add to my work list". Siri will reply, "What should I add to your 'Personal' list?
and you can continue from there.
There is a syntax for doing all this in one sentence, but I find it only works about half the time. Too many fields for Siri to parse in her current Beta stage
/d

Set Location of individual text box - report design

Post Author: sonjeeva
CA Forum: Crystal Reports
Hi Guys,
Is it possible to set location of an individaul text box to be at the end of report? I know if I have this at end of report area it would work. But my report has a sub report in end of report area and the text box doesn't appear at the end of both reports.
Cheers
Sonny

Post Author: kcheeb
CA Forum: Crystal Reports
If you are creating the report through code (C#, VB etc.) you could get the location/size of the subreport and then set the text box location based on those parameters.
I don't think it's possible from within the Crystal report designer itself. At least I couldn't find a place to do this.

To exclude SCARP storage location from MRP

Hi Gurus,
We have a issue regarding the scrap Quantities. we need to exclude these materials from the available stock for MRP. We have a setting in the MRP available stock with Blocked stock not checked and restricted stock checked.
My question is if we un check the restricted stock, is the MRP will not consider the stock in scrap storage location.
Please help to find the solution.
Thank you.
naveen.

Hi,
Your scrap str location is not either blocked or restricted str location. This is a regular str location but the name is scrap location.
System will consider this str location as a regular str location. So do setting to exclude this str location from MRP as previous member explained.
Regards,
Dharma

I want to exclude a storage location from MRP

I want to exclude repair storage location from MRP so that the stock with repairs storage location should not be considered for other demands.
Also repair storage location stock should not be calculated against 'stocks' term in MD04.
How to do this ? Pls share.

Hi,
In transaction OMIR, choose your plant & then for the storage location you want to exclude from MRP enter 1 (exclude from MRP).
After this setting is maintained, whenever a material is created in this plant & storage location, it will have MRP indicator as "1" in the mrp 4 view .
For materials already in this storage location if the MRP indicator "1" is not maintained in mrp 4 view, please go for a mass change maintenance in the material master & maintain this indicator.
Stock in the excluded storage location will not add up to the stock which is displayed in the top in the md04 screen. This stock will be displayed separately in the bottom of the screen.
Please let me know if you have any questions.
Regards,
Senthilkumar

Set location - CR 8.5 vs CR XI

I didn't find exact answer to my question.
Short overview. CR layouts are used in ERP system just reading and formating data from SQL 2005 prepared by special stored procedures. Main clue is to use the same layout for production and test databases (with many different names).
After link new table in CR 8.5 there was only a need to change 'Set location' -> 'Location: Table' from <database name>.dbo.<table name> to <table name> and it works fine.
Now I'm switching CR layouts to CR XI R1 SP4 (the newest one supported by ERP) but can't find the same possibility like described for 8.5. All new tables based on OLE DB have 'catalog: <database name>' which I cant change. Even if 'Initial catalog' is empty there is always database name in table properties which causes building queries like 'select ... from <database name>.dbo.<table name>' instead of <select ... from <table name>'.
How to enable behavior known from 8.5 in XI?

Solution:
Entering manually table name in 'Overridden Qualified Table Name' without database name solves the problem.

Deactivation of storage locations from MRP run

Hi gurus,
How can i deactivate a particular storage location from MRP in a particular plant.
Regards
Kaisar

Hello,
There are 2 ways of doing that.
1. With the Transaction OMIR and selecting th indicator 1 Storage location stock excluded from MRP
This storage location will be excluded from MRP.
2. For a Specific Material(s), if you want the Storage location to be excluded from MRP:
You need to select the storage locatio MRP indicator as 1 in MRP4View of the Material.
Some concerns:
Your Materials are extended to the St.location say xxxx.
Now if you want this storage location to be excluded from the MRP.
By simply seeting the Customization settings will not work.
You need to manually select the MRP4 view and change the St.Loc MRP Indicator to 1.
The Materials created after this customization setting will adopt this settings automatically.
Hope this helps..
Regards,
Siva

Default Storage location from PO to GR

Dear All,
How i can made storage location from to come automatic while i am doing the GR through MIGO movement type 101, but it should be changeable but main thing it should appear from PO while i am doing GR.
regards,
qsm sap

Hi,
First Storage location should be extended in Material master.
Then you can include this Storage location in PR . If you are creating PO based on PR then it will copy to PO.
While doing GR in MIGO with respect to PO the system will default this Storage location & stock will be posted to that Storage location.
If you extended in Material master but not inputed in PR/PO system will not default in MIGO.
One other option is In IMG settings if you set the checkbox set storage location automatically.
Then in MIGO you can directly choose any storage location which is created for your plant.(Make sure the str loc should be part of Plant)
No matter if you extended in material master/PR/PO
rgds
Chidanand

Logic plug in setting locations?

Hi, I'm still kind of new to Mac's and a few weeks ago I was cleaning up and re-orginizing some of my folders. I wasn't aware that mac's are much, more folder specific than a windows OS? While moving various files/folders when cleaning/orginaizing, I must have moved some of my 3rd party logic folders? I didn't move any of the actual au componnets they are still in the correct place so that logic can locate them. Only problem now they can't seem to locate them even though the components show in the correct component folder? Did I mess something up by moving folders around? I had assumed as long as I didn't mess with things like the actual component and preset folders that it didn't really matter if I moved I guess what you would call the plugins' main root folder, if that sounds right?
Appart from probably having to trash everything and re-install is there anything I can do? Perhaps a quick fix like ,"just drag/move all my 3rd party plug ins to such and such folder? I don't understand why in a mac that you can't just create a new folder and call it, "logic plug in related files" for example; and move all of your 3rd party plug ins over to it(except for the actual commponents of course)? Or can you? I guess I'm just generaly copnfused about plug in setting locations for both 3rd party and non. Am I correct in saying that plug in setting location folders can actualy vary from 3rd party to 3rd party plug ins? If this is true what a pain! Like I said I probably have no other option except to delete and re-install? I wish my mac could be brought back to how it was before I messed with any folders! Trouble is to free up hard drive space I got rid of a bunch of time machine backup so I don't think I can go back to a previous state before I moved any stuff around:(
I just don't get it though and its very annoying. For example, I have a lexicon reverb bundle, always worked great;the correct components are still in the correct audio/plug in/commponent folder, but ever since I moved some root plug in files around the lexicon plug ins no longer show up. They don't even show in the AU manager,which is frustrating becasue I can go to the component folder and they are physicaly there! Why would it not even show in the AU manager if the component is physicaly in the right place still?Help please...Wha did I do/What do I do?
Thanks everybpody,
Mike

A line across a plugin usually comes from trying to insert a mono plugin on a stereo track of vice versa. Could this be your problem.
I've rearranged my project folders many times without any problem whatsoever. Have you saved your projects with Assets?
R

How set location for tooltip text ??

hi ,
i want to set tooltip location myself to a button . for this i override methods are
1. public String getToolTipText(MouseEvent e)2 public Point getToolTipLocation(MouseEvent e)here is code... where i have to change to set location for tooltip
* DebugGraphicsTest.java
* Created on April 28, 2005, 1:14 AM
package swingtest;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
* @author Paramasivam
public class DebugGraphicsTest extends javax.swing.JFrame {
    public DebugGraphicsTest() {
        initComponents();
        MyButton btn = new MyButton("Chem m e");
        btn.setToolTipText("this is actual");
        getContentPane().add(btn);
        jButton1.setToolTipText("button 1");
        jButton2.setToolTipText("button 2");
        jButton3.setToolTipText("button 3");
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    private void initComponents() {
        jPanel1 = new javax.swing.JPanel();
        jButton1 = new javax.swing.JButton();
        jButton2 = new javax.swing.JButton();
        jButton3 = new javax.swing.JButton();
        getContentPane().setLayout(new java.awt.FlowLayout());
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        jButton1.setText("jButton1");
        jPanel1.add(jButton1);
        jButton2.setText("jButton2");
        jPanel1.add(jButton2);
        jButton3.setText("jButton3");
        jPanel1.add(jButton3);
        getContentPane().add(jPanel1);
        pack();
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new DebugGraphicsTest().setVisible(true);
    // Variables declaration - do not modify
    private javax.swing.JButton jButton1;
    private javax.swing.JButton jButton2;
    private javax.swing.JButton jButton3;
    private javax.swing.JPanel jPanel1;
    // End of variables declaration
class MyButton extends JButton{
    public MyButton(String s){
        super(s);
    public Point getToolTipLocation(MouseEvent evnt){
        return new Point(100,300);
    public String getToolTipText(){
        return "hihi";
    public String getToolTipText(MouseEvent me){
        return "event hihi";
}

Adding the line ToolTipManager.sharedInstance().registerComponent(this); to MyButton's constructor seems to solve the problem.

Set location in runtime..

Hi
usually i used to save file like this
String retreive = textarea.getText();
          RandomAccessFile logfile = new RandomAccessFile("c:\\saved.txt","rw");
          logfile.writeBytes(retreive);
          JOptionPane.showMessageDialog(null,"Saved ..","Saved...",JOptionPane.WARNING_MESSAGE);
          catch(IOException e)
          System.out.println("cannot write on to log file....");
          }But it works correctly , i set location inside that and it will save file as i set the location..
How can i save and decide where to save the file at runtime...
i mean when i press save button i want to select the drives and save it to the folder as i wish...
is there any suitable solution.???

Use a JFileDialog to get the location from the user and use that instead of hardcoding c:\\saved.txt.

Set location from ODBC to qry

Similar Messages

Maybe you are looking for