Set .mail as default for automatic replies

My system goes automatically to Entourage when I reply with an email on a website. I would like it to go to Mail. Where do I set it as the default email program I am using? Thx!

It is a little counter-intuitive, but you go to the Apple MAIL program, select preferences under the MAIL menu item. Click on the "GENERAL" icon at the upper left and the first entry allows you to select the email progam you Mac uses as a default. Just change this from Entourage to Mail and you will be sent to mail for all MAIL TO web page entries.
Paul

Similar Messages

  • Re-set Mail as default for Safari

    Recently I discovered that Google Mail has become linked to Safari. When I click on the Share button, only Google Mail opens. I don't know how it changed, but how do I change it back so that Mail opens when I want to share a webpage?
    Thank you.

    Mail > Preference > General > Default email reader:
    Click in the box and select Mail.
    If not shown, click  "Other".

  • How do I get Mail notifications only for important replies?

    Is there a way to set up the notifications from Mail to only pop up for important replies? I know that I can change the mailbox which goes through to the notification center, but how do you make that mailbox? I can't figure out the smart mailbox rules for this. I don't want to get notifications from all mail, just replies to specific messages of my choosing. I don't care that some web store is having a sale, I can check that later. I do want to know that my coworker replied to that message I really needed an answer to right away. So how do I limit it? It can't rely on things like importance flags, since there's no guarantee that the responder will keep the flag. Any ideas?

    I will clarify. I would like to select emails that are either:
    Replies to recently sent mail. This isn't perfect, since some messages are not important, so I don't need to know right away that there's a reply.
    or
    Replies to specific messages that I would mark as important within Mail.app, somehow. I don't specifically want to mark the messages with an !important flag, since that would impose on the recipient, and there's no way to guarantee that they will reply with the !important flag intact.
    I suppose that I might use Contacts groups and add the "currently important" people to a specific group, then select the messages from people in that group, but that is not exactly optimal, since I'd have to maintain that group manually.

  • How to set database name default for oracle discoverer 10g

    Hi
    Do you have idea of setting the database name default for oracle discoverer 10g

    I mean to say while login to discoverer 10g, it will ask for following options. In this Database should select the database name by default instead of any value
              User Name
              Password
              Database
              End User Layer

  • Setting Sound preference defaults for managed accounts

    Hi, I just added a bluetooth speaker to my MAc Mini, and I had no problem setting it as default speaker for my administrator account. However the setting is not automaticatically transferred to the managed accounts, and them beeing managed can not acces the preferences. Is there a simple way of doing this, or should I go to the trouble of setting each account as administrator, log as the other user, change the preference and then change it back as managed account?

    Rebooting again resolved the problem. Though I rebooted differently than I generally reboot. I left the audio interface powered-up during boot. Generally, I only power-up the interface (USB2) when needing audio. It's never been a problem. I hope that wasn't the solution to this problem.

  • Set indent as default for all documents

    Is there a way to set my own indentations for paragraphs, as a default for any new document I create?
    An indent that starts way over here offends my art director's eye. <g>

    cafox513
    You will need to make a custom template with your own settings.
    The default text style is Body so set that the way you like it in the template.
    If you need help with templates and styles look here:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=2&sid=2abc89bd5c5512 60fd5ce34a4e6ad05b&mforum=iworktipsntrick
    You can set your custom template to open by default in your preferences.
    Peter

  • Having difficulty setting MplayerX as default for ALL .avi/.mp4/etc files.

    When I open a file with "Open With" option, selecting "Other", then selecting MplayerX and at the bottom clicking "Always Open With" - it works great for that one file. The rest automatically open with Quicktime. How do I make my MplayerX my default for all the video files?
    Thanks!

    Try clicking the change all button.

  • Is There a Way to Set Up Verizon e-Mail as Default for mailto: Links?

    I am not technically savy so I need to have this question answered in an easy-to-understand manner (i.e. as if you're explaining to a 10-yo).  Seriously.  I would like my Verizon email account to open whenever I click on a web link for "mailto:" or if I merely want to send something from the web to one of my friends.
    Is there a way to do this?  Is there a way to put a shortcut for my Verizon email on my desktop?
    Thank you for any help you can offer.
    Using: Windows 7 Home Premium; 86-bit; Google, Firefox and IE 9 browsers (Google Chrome most of the time).

    Hi...
    The recomended way of setting up Applleds is to have one common one for "the Stores" (iTunes, App Store & Mac App store) so that all purchases are shared, then a seperate individual account for iCloud syncing EACH
    So for instance you'd have [email protected] for the stores and [email protected], [email protected] [email protected] & [email protected] for the individuals
    Thats' what I've done here for myself, mrs & 4 kids.
    Regards,
    Shawn

  • How make Mail the default for chrome

    I'm switching from Gmail (web) to Mail under Mavericks but I can't see how to force  Chrome to recognize Mail as the default handler.
    In the handlers dialog there is an entry for webcal, but no other handlers, nor does there appear to be a way to add handlers.
    I saw a command-line option for making the default handler Gmail; is there one for changing it to OS X Mail?
    OSX 10.9.3
    Chrome 33.0.1750.152
    Mail 7.3 (1877.4)

    How would it be if I asked how to do this with NON-BETA Mavericks? It's not as though Mail is a new app.
    No, it's not a new app, but a new version. Things are different/new in beta software - that is why it's called beta and that is why it is tested before release. And it is also why you can expect things not to work properly or have glitches - you're supposed to be testing it. For instance, the Mountain Lion version of Mail is 6.6 (and yours is 7.3). And, there would be differences between 10.9.2 and 10.9.3. So it functions differently - another reason why no one here can effectively help since they don't have that version.
    I'm going to end this discussion before the mods decide to delete it (as they usually do with discussions about not yet publicly released software).

  • Set Null as Default  for input parameter to a stored procedure

    hi ,
    How can we set default values as NULL to an input parameter in a stored Procedure.
    create or replace procedure emp_proc ( p_test_input in varchar2
                                                        p_emp_id in number,
                                                        p_emp_name in varchar2,
                                                       p_manager_id in number )
    as
      begin
       if ( upper ( p_test_input ) = 'I' )
       then
          insert into emp
          values      ( p_emp_id  ,p_emp_name ,p_Manager_id,sysdate );
       elsif ( upper ( p_test_input ) = 'D' )
       then
          delete from emp
          where       emp_id  = p_emp_id;
       else
          dbms_output.put_line
             ( 'Please input ''A'' for ADD or ''D'' Delete  EMPLOYEE'
       end if;
    end;As Shown above if i want to do only delete operation
    i want to call this procedure like without passing extra parameters .
    EXECUTE  emp_proc('D',1010);Edited by: Rede on May 28, 2010 12:21 PM
    Edited by: Rede on May 28, 2010 12:22 PM

    create or replace procedure emp_proc ( p_test_input in varchar2,
                                                        p_emp_id in number,
                                                        p_emp_name in varchar2 default null,
                                                       p_manager_id in number default null )

  • Unable to set "Mail" as default mail client

    I did have a prefpane from Rubicode .. deleted, restarted .. frankly not sure if that was even the problem. However, every time I select "Mail" to be the default email app, I still see iTerm.app listed as the default email handler. I have tried changiing and restarting to no avail. All I have to do is make the change to ANY email program, and close the MAIL PROGRAM. The next time I check in Mail/Preferences/General/Default-email ... I see Term.app ...

    However .... I might add that in making the experiment, not deleting however renaming that plist, Mail made another; started the process of asking me to make some email accounts; I quit right then.
    But ... when I restarted Mail again, with the original plist, to my chagrin, I noted that I can make "Mail" stay (stick) as the default email client.
    I just restarted the macBook to prove it to myself ... been certainly more than a week and i'd not resolved it. So, we'll give you the credit for causing me to move the original out then back, which "seems" to have obliquely corrected the problem.
    go figure, on that one.
    tnx

  • Annoying behavior - PSE6 sets itself as default for edited files

    Greetings. I'm running PSE6 on a Mac. When I edit a file, PSE sets itself as the default program for that file. For example, if I edit and save a jpg, the next time I double-click on that jpg it will open in PSE instead of my default graphics viewer. That's annoying and time-consuming. Is there any way I can configure PSE to stop doing that? Thanks!

    Please excuse me, that didn't come out the way I meant it. I wanted to say that:
    1) I double-click a jpg and it opens with Xee (or whatever).
    2) I edit the file in PSE and do "Save as".
    3) When I double-click on the new jpg, it opens with PSE. Other jpgs continue to open in Xee.
    So I can't see what Finder has to do with it. When PSE saved the file, it made itself the default program for that file, irrespective of the default program for that type of file.

  • Set vlc as default for everything

    I would like to use the vlc player as the default player for everything but can't seem to get it set right. VLC plays the windows media files fine but quicktime still wants to play some files. How do i make vlc the default player for everything?

    One way would be to change each media type individually. Right click on an example of a media type you want to always open in VLC and choose Get Info. In the Open with pane of Get Info choose VLC. Then Press the Change all... button. In the Dialog Window that appears press the Continue button. Now VLC will be the default app for opening that media type.

  • Why is the Expired Setting on by Default for our Users?

    Our agency has Windows 7 with Outlook 2010.  We use Exchange Server 2010 - it is administered for us by our Montana Department of Administration. 
    We have our own domain in Montana State Government which is separate from all others as we are a very large agency
    Our customers starting noticing that they were seeing many expired emails that were sent to them and that they sent.  They never turned on this feature in the individual or for all their emails.
    Was there an update from Microsoft that turned this on by default?  If so, is it in the enterprise policy for Office 2010 Professional somewhere that you can turn this off by default? 
    People are getting upset about this just "turning" on and want it off and we have over 2200 employees and need to have a solution that doesn't involve showing all 2200+ folks how to do it manually. 
    Thanks,
    DoriLynn
    DoriLynn

    Hi,
    According to your description, you want to delete the old emails for all your users. If I misunderstand your meaning, please feel free to let me know.
    If yes, I recommend you create a retention policy for all your users.
    And here are the steps you can refer to :
    1. Create retention policy tag:
    New-RetentionPolicyTag -Name "name" -RetentionAction MoveToDeletedItems -AgeLimitForRetention 90 -Type all -Comment "comment"
    2. Create a Retention Policy to include the tag
    New-RetentionPolicy -Name "policy name" -RetentionPolicytagLinks "tag name”
    3. Apply the Retention Policy to all the mailboxes:
    Get-Mailbox | Set-mailbox -RetentionPolicy "policy name"
    For more information, you can refer to the following article:
    http://blogs.technet.com/b/hot/archive/2012/04/26/how-to-apply-retention-policies-to-all-mailboxes.aspx
     If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Setting up start date for automatic backup

    IS there instructions on how to set up automatic back up setting start date WD Element 3 tb external hard drive. I have previous backups on another external drive and do not want to duplicate what I already have backed up...any help would be appreciated...mo_reb

    Hello, welcome to the community.
    The WD Elements does not have any backup software to do this, you will need a third party software to perform a backup with this drive.

Maybe you are looking for