Set main camera as default on 6220

when i hit the camera icon on the main screen of my 6220, it turns on the little camera on the front, then i have to change to main camera in the settings. is there a way i can get the main camera to become the default camera for that icon on the main screen? 
also, is it normal to have a small purpleish haze in the lower part of photos taken at night with the flash? has anyone seen that with their 6220??

It's activating the front camera because your lens cover is closed. The rear camera will not work with the cover closed.
Instead of clicking the camera icon just open your lens cover and it should automatically start the camera application.
Not sure about the purplish haze, have you checked to see if you have the latest firmware?
www.nokia.com/softwareupdate

Similar Messages

  • How to set an external USB cam as default

    I have two additional USB cams connected to an iMac. When I open QuickTime or other apps which can use the cams I always see the internal USB cam first and have to switch to one of the external cams. Is it possible to set one of the external cams as default? Thanks.

    I found one app, custom ringtone.
    http://www.1mobile.com/redirect/com.wuxiastudio.cu​stomringtone
    I have tried it, it really works.
    A past Nokia X user, now a X user.

  • Camera Calibration default setting question

    HI I'm using a Canon 5D w/ LR3.3. I want to set the Camera Calibration (in the Develop module) to Adobe Standard and have it set that way all the time. I have looked in Preferences and cant find a way to do this?
    Thanks
    Mike

    Mike,
    Diver Mike wrote:
     One other question: When I look at the Process drop-down, (right above Profile), it now says '2003'. Before when it said, '2010 Current'. Is that just because Adobe Standard came out in 2003?
    The process version has nothing to do with the camera profile selected, Adobe Standard exists for all LR supported cameras, and has so before PV2010.
    The process version influences the way the Raw processing pipeline works (pre LR3 vs. LR3). Quote from the manual:
    Lightroom 3 uses improved processes
    to calculate Detail and Fill Light adjustments. Photos that are
    edited for the first time in Lightroom 3 use these new processes.
    Photos that were adjusted using a previous version of Lightroom
    do not.
    To take advantage of the newer processing technology,
    however, you can update photos to the current process version.
    The process version specifies which version of the Camera Raw sharpening
    and noise reduction functions are used to adjust and render photos.
    The new process version is Process 2010. The old process version
    is Process 2003.
    I guess you might have been looking at a newly imported image when you saw 2010, and are looking at an image imported before LR3 when you see 2003.
    And should I be using Adobe Standard in the first place? Is it just a personel thing?
    It is a personal preference for a starting point to work on your images. I use Adobe Standard for my 5DMkII as well, whereas I use a different one for my 1DsMkII, because I don't like the Adobe Standard there.
    Beat

  • How do I copy Camera RAW defaults to another computer?

    I use Photoshop CS6 and Adobe Camera RAW to process RAW files (D700).  I have ACR preferences set to make the defaults ASA specific, which means I have 41 defaults for ACR.  I have a folder of images shot with the D700 that includes one image for each ASA the camera can select when auto ASA is activated in the D700, that's where I get 41 ASA values.  I use the images in this folder to set a default for each ASA value and then select one at a time in Camera RAW and click to set a new default for ACR (Adobe Camera RAW).  These defaults are saved in some location on the computer, but I don't know where.  I would like to copy these saved defaults to another computer that is also running Photoshop CS6.  Does anyone know where the defaults are located, or is there a better way to accomplish this task?

    If I understand what you said, I think this will only save RAW Defaults for that specific image conditions.  I have the RAW converter set to make it specific to image ASA and for the D700 it can set 41 different ASA values for the image.  I have 41 Camera RAW Defaults for the D700 and would like to transfer all to the second computer, that's the reason I am looking for options to accomplish this task. 
    I have a folder with 41 D700 NEF files with each having a different ASA value.  I select this folder of images in Camera RAW, adjust each image to the defaults I want - the main difference is noise settings.  When I have the settings I want, I click the Done button.  I then open the images again in Camera RAW, select one at a time and select the "Save New Camera Raw Defaults".  Now when I open new NEF files for the D700 it will automatically apply the Default I want based on the image ASA. 
    I currently copy the folder with the 41 images that was saved with the defaults I want and open them one at a time and save a new default on the second computer.  If I copy the "Camera RAW" folder it should give me all the same defaults, custom camera profiles, custom curver, settings, etc. 
    I have not tried this yet, but if it works it will save a lot of time keeping the two computers in sync relative to these parameters.   

  • Camera settings Default

    Is there a way to change the default camera settings - I would like to keep the flash off.  Or change the exposure settings permanently.
    Help?
    Thanks,
    Veepee
    Nokia 3395
    Nokia 6600
    Nokia N95 8GB
    Nokia N8 (Anna)
    Nokia Lumia 930

    VeePee wrote:
    Is there a way to change the default camera settings - I would like to keep the flash off.  Or change the exposure settings permanently.
    For the N8 this has been answered elsewhere on forum:
    Choose the "Spanner" icon on the bottom right of the main camera screen, and then select "Scene mode", select "User defined" and choose "Edit", Switch Flash = Off + change any other values to suit > "Set as default scene mode" = YES
    Happy to have helped forum with a Support Ratio = 42.5

  • How can I manually set the Camera Roll to start at an arbitrary image number, i.e., IMG_0553.JPG?

    I have an iPhone 4s, currently with iOS 5.1. I use it with my desktop computer which runs Windows Vista (and has the latest iTunes installed 10.6), and my laptop, which has Windows 7 and the latest iTunes. I use iCloud and Photo Stream primarily with the desktop computer.
    Since receiving the iPhone on launch day, (Nov...14?, 2011), I've had to "Set [it] up as new" twice, most recently this morning.
    After setting it up as new, the Camera Roll starts over with pictures at IMG_0001.JPG. That means, that, after my first picture after this latest reset, I'll have three pictures all initially named IMG_0001.JPG, and instead, I'll have IMG_0001.JPG, IMG_0001 (1).JPG, and IMG_0001 (3).JPG in my photo library. This robs me of the ability view my photos sorted by name, which is often the default sort order in my photo folders, and still see them chronologically. I can, of course, sort them by Date Created, but it would be more flexible if I could do either one.
    Therefore, I'd like to set Camera Roll to start numbering its photos starting with whatever the next number higher than all the rest in my library would be, in this case, IMG_0553.JPG.
    I can't just use Windows to go into the iPhone's Camera Roll and rename the first photo I take to be IMG_0533.JPG. The iPhone just doesn't allow tampering with the filename that way. Can I even count on Camera Roll to note the presence of the highest numbered file in its folder and then just name the next picture taken the next higher number?
    Since I have no reason to believe that I won't have to reset the phone again, I'd like for whatever method I find to be one that I can use to set the Camera Roll to start at whatever other number I need when the time comes.
    Suggestions welcome...
    I have an idea that I'm about to try...I'll report back if it succeeds...
    UPDATE: So what I tried to do was, with an empty Camera Roll, I uploaded a picture with the filename and number that I wanted (IMG_0533.JPG) into my Photo Stream, then saved that picture to my Camera Roll, hoping it would retain the file name, and then Camera Roll would just use the next number. That didn't work. It saved into Camera Roll as a brand spanking new IMG_0001.JPG.
    Message was edited by: Shadowhawk kTreva

    To bring the solution into this thread, here are the consolidated solution bits from the other thread:
    I installed i-Funbox and found the file referenced in that other thread ( iPHone / Raw File System / PhotoData / MISC / DCIM_APPLE.plist ).
    That file has a section that I'm replicating below that is the part that that original poster edited, and is the part that needs to be edited for my problem also:
              <key>DCIMLastFileNumber</key>
              <integer>5</integer>
    That other thread's original poster wanted his photos to start with 0001, so he set his "DCIMLastFileNumber" to 0.
    I wanted my next picture to be IMG_0553.JPG, so I edited my file's 5 to 552.
    I did that editing by first copying the file to my laptop (using the Copy To PC command), then opening it up in a text editor. I did the edit, then saved it.
    After that, I used i-Funbox' "Copy From PC" command to copy the edited file back to the same location, hoping that the program would take care of any permissions, etc.
    I had to do the Copy From PC twice.
    On the first try, it seemed to copy just fine, but, for whatever reason, the copied file was empty when I opened it for verification. But I tried again, and that seemed to work (opened for verification, and it was as expected).
    I then unplugged it, copied a picture from the Photo Stream to the Camera Roll, then plugged it into my laptop to verify the filename. It was exactly as I wanted: IMG_0533.JPG. Then, for fuller verification, I unplugged it, took a new picture, then replugged it in, and confirmed that the next pictures (I had HDR on) were IMG_0534.JPG and IMG_0535.JPG.
    ...and that's where I am. Nothing has crashed yet, too, which is all to the good ('course, I haven't done anything else with the phone yet).
    Fingers crossed!

  • I downloaded a ringtone yesterday and set it as my default ringtone.  Today it is gone and I need to know how to find it or download it again without having to pay for it for a third time......

    I downloaded a ringtone yesterday and set it as my default ringtone.  Today it is gone and my ringtone is the standard default that came with the phone.  I cannot find the ringtone in my settings and I don't want to have to pay for a ringtone for the third time.  The ringtone does show up in my purchased file in itunes.  How do I download it again?

    http://support.apple.com/en-us/HT204076

  • Why can't I save camera raw defaults?

    I am currently unable to reset my camera raw defaults in CS5 (Camera raw 6.5).  When I click on "Save Camera Raw Defaults", the changes do not show up when I open up a new image using Adobe Bridge. I seem to be stuck with the changes I made some time ago. What could be happening?

    Camera Raw uses the same settings you used last time to open a file.  That's just the way it works.  The defaults you set will be used on any image you haven't opened before.
    In order to revert an image that's been opened before to the new defaults, you need to do one of the following:
    1.  Choose Camera Raw Defaults from the menu:
    2.  Depending on how you have configured Camera Raw to remember your past settings, either delete the sidecar XMP files or go into Edit - Preferences - Camera Raw... and purge your Camera Raw cache if you'd like to throw away all previous settings and have future opens use your new defaults.
    -Noel

  • Hi .after up dating my iphon5 to ios 8.1 and 8.1.1 my main cam dot wrong.dosnt work correctly.the cam frizing at the start for 10 sec.but second cam working normaly.

    hi .after up dating my iphon5 to ios 8.1 and 8.1.1 my main cam dot wrong.dost not  work correctly.the cam frizzing at the start for 10 sec.but second cam working normally.

    I hate being the bearer of bad news, but from what I have read on the Forum and FAQ, you will need to un-install Network Magic from all of your computers making sure that no NM settings folders are left behind under users.  Then unplug all wired computers and rebuild your network by re-installing NM  in each computer before connecting it to your router.  After you have added all of your wired computers, set up your wireless network and install NM and add each wireless computer.
    That is a lot of work.  I hope this helps.
    Gary

  • Change import from camera destination default?

    Hi,
    Is these a way to change the "import from camera" destination defaults? I typically want to put new imports into new directory, and it would be helpful to specify a default parent directory.
    Thanks. Kent

    When I went to the Audio Midi setup, bit showed that the default audio output was already set to 44100hZ. I tried the camera again, no luck.
    It is interesting that if I create a new project, it too will open with the filename and then (iSight) in brackets behind it - as if that is some type of preference setting, but I can't understand where it came from.
    I couldn't see anything in the article.
    Any other ideas?
    Thanks,
    Cheryl

  • Why can't FF successfully set itself as my default browser?

    Firefox 3.6.10 is unable to successfully set itself as my default browser.
    I'm running Win7/64 Enterprise SP1
    FF is set to check itself on startup, and each time reports that it is not the default browser, do I wish to set it so? I say "yes", but am asked next time anyway.
    If I then shut FF down immediately, then restart it, I am asked again.
    FF has an option to "check now" whether it is the default, under the Tools->Options->General tab.
    Clicking "Check Now" brings up that same dialogue.
    I click "Check Now", am told FF is not the default, do I want to set it so? I answer "Yes", the dialogue is dismissed.
    I then click "Check Now" again, and am again told that FF is not my default. (Yes, I am Administrator)
    Under Default Programs, FF is designated to handle FTP, HTTP and HTTPS protocols, and to open .htm and .html filetypes.
    As far as I can tell, FF acts as if it is the default browser. Why is its own check for same always coming up false?
    What does FF '''really''' check, if not the protocols and file associations?
    How can I make this stop?

    I already was administrator and general sysgod of my computer.
    I was provoked into trying related things at random, and here's what I came up with as a workaround:
    If you go into Control Panel->Default Programs -> Set Program Access and Defaults, there are three radio-button options: Microsoft, Non-Microsoft, and Custom.
    (Custom was already selected)
    With the Mozilla Options->Advanced window open, check the "Set as default browser", then click the "Check Now" button. It will report that FF is not your default browser, etc. Ecce quaestio, and all that.
    Back to "Set Program Access", click the "Non-Microsoft" button. Close it.
    Back to FF, and try "Check Now" again. Now it says "FF is already your default browser".
    Now RE-OPEN Control Panel and get back to "Set Program Access and Defaults". It's back to "Custom". But FF is apparently satisfied that it is the default now. Let's see if it stays that way.

  • HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR,  as I open files in a folder and lets say they are labeled in yellow  they are all going back to  the camera raw default , in other words no ma

    HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR,  as I open files in a folder and lets say they are labeled in yellow  they are all going back to  the camera raw default , in other words no matter what work I have done, inc cropping they  all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to  yesterday, when this first started.
    I recently changed computer to 64bit from 32bit, not sure if this causing  the problem or not. Any help would be appreciated.

    Robert,
    Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals?  Sorry, I can't quite follow you.
    Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
    Thanks.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • When I email myself a picture from my iphone 4s, the email is sent from an email account that I don't have set up as the default account. How can I set it up so that the emails are coming from the default account selected in Mail?

    Under my mail tab, it shows that I have a specific email account set up as a default account. That is the account I would like for me emails to be sent from. But when I actually send out an email such as a picture, it is being sent from one of my different email accounts that is not set up as the default. How can I change this so that future messages will be sent from the default account? Any advice would be appreciated. Thanks!!

    All photo attachments received or sent with the iPhone's Mail app appear inline or viewed in place within the body of the message when viewed with the iPhone's Mail app which is the same with the Mail.app on a Mac. A photo attachment that appears inline or viewed in place does not mean the photo was not sent as a true attachment to the message. A photo attached to a message with the iPhone's Mail app is sent as a true attachment to the message. How an inline or viewed in place attachment appears on the recipient's end depends on the recipient's email client. If the recipient's email client does not support viewing an attached photo inline or viewed in place within the body of the message, the attached file must be manually selected and opened to viewed.
    I am getting the email with the Picture Inline ( not as attachment),The picture is shown distorted , no metter what i do and with what mail client i am using (Gmail\Hotmail\My Enterprise exchange mail), i still get the same behavior.
    With which email client?

  • I have a brand new macbook with microsoft office loaded. I set outlook as the default mail. i would rather go back to mac mail but can't figure out how to do it. any ideas?

    I have a brand new macbook with microsoft office loaded. I set outlook as the default mail. i would rather go back to mac mail but can't figure out how to do it. any ideas?
    Thanks for any help
    Lou

    I have a similar problem: I switched from mac mail to Outlook 2011 as the default client, and want to switch back. Mailto links (eg from browser etc) default to Mail.  However, when I try to email a Word document as an attachment, it continues to open Outlook.  Outlook has a button in its prefs for making it the default client, but I don't see a way to turn this pref off in either Outlook or in Word.  

  • My HP Officejet Pro 8600 Plus prints emails as landscape only; how to set to A4 as default?

    All of a sudden my printer has set to landscape printing of emails; how to set it portrait as default for printing?

    Hi there @OB1214 , welcome to the forums
    I understand your emails are printing in landscape. If the issue is only when printing emails, there may be a setting within your email settings to change the print settings.
    If all of your programs are printing in landscape, check the print settings on your computer.
    Changing Print Settings in Mac OS X
    Changing Print Settings in Windows 7
    I hope that helps!
    If the problem continues, please let me know the details and also which OS you are running.
    Thank you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for