Set mandatory fields for MSC2N, MSC3N

Hi,
I have done the configurations in Edit Field Selection Control in Batch Management. I've set the mandatory selection for all msc*. But seems it only works for MSC1N, not the others.
Can someone tell me why and how correct it.
Thank you.

Go to SHD0
Enter your required tcode e.g. msc3n
Enter screen varient name
mark fields as mandatory u want.
I recomend to creat another tcode if u change settings as I said.

Similar Messages

PS: Setting Project Profile as a mandatory field for Project Definition

Hi,
I would like to know how to set Project Profile as a mandatory field for Project Definition (CJ20N or CJ01). I tried to look for controls at OPUK config but the Project Profile is not available for definition - either mandatory, optional, suppressed, etc. Would appreciate if you can share your expertise on this.
Thanks!
Regards,
Vivian

Hi,
I would like to know how to include some additonal fields in OPUK/OPUJ. We have defined some .INCLUDE component / fields to SAP standard table PRPS/PROJ. We want those fields to also appear in OPUK/OPUJ so that we could also defined their characteristics - whether input, mandatory, suppressed, etc.
Thanks!
Regards,
Vivian

Mandatory fields for mapping in ORDERS idoc.

Hi
I m working on File to idoc scenario for creation of sales order in ECC 6.0 , now I want to know what are the mandatory fields in ORDERS idoc which needs to be populated or else disbaled so that the sales order gets created properly in the ECC 6.0..
Pl let me know the method of finding mandatory field for mapping for any idoc and which fileds of idoc are to be disabled.
Pl help ..
ans will be rewarded .
thanks & rgds
mojib

HI,
U can disable the control record segment and in the IDOC adapter use the option apply control record from payload.
If you have set the Apply Control Record Values from Payload indicator in the receiver IDoc adapter, the following fields are filled from the IDoc-XML payload:
·        MESCOD
·        MESCFT
·        TEST
·        EXPRSS
·        STD
·        STDVRS
·        STDMES
·        SNDSAD
·        SNDLAD
·        RCVSAD
·        RCVLAD
·        REFINT
·        REFGRP
·        REFMES
·        STATUS
·        DIRECT
·        OUTMOD
·        CREDAT
·        CRETIM
read the information in below link:
http://help.sap.com/saphelp_nw70/helpdata/EN/ab/bdb13b00ae793be10000000a11402f/frameset.htm
thnx,
chirag

Mandatory fields for BAPI_ACC_DOCUMENT_POST

Hi
I am getting the follwing data from the file (Which is coming from oracle) invoice number and the amount,
from that i have to use Fb70 tcode for posting ,Please help me what are the mandatory fields for FB70,
how will get those fields from SAP. How to use the BAPI ?
Regards
Pabs

hi
check out this thread
Re: BAPI_ACC_DOCUMENT_POST
hope this helps
regards
Aakash Banga

Mandatory fields for xd01

hai,
what are the mandatory fields to create the datas for xd01.(customer master data).
regards
surender

HI
MANDATORY FIELDS FOR CREATING CUSTOMER DATA ARE:
Account Group---ktokd(field name)
Name---Name1
Search term----sortl
postal code----pstlz
country-----land1.
Regards,
vineela

Mandatory Fields for IDOC ORDERS01 for Pricing Condition EDI1 to trigger

Hi ,
I'm Testing an Inbound ORDRSP using we 19 for Pricing Conditions EDI1. What are the Mandatory Fields for IDOC ORDERS01
Thanks

hello,
I think it's better to execute VA01 to create a sales order; in that way you should have an idea of mandatory fields.
Thanks.

Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST

hi all ,
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
what all data i need to give to post a document.
Thanks and Regards
JK

Hi...
part of my source code:
** Header Data " Sending comp code
wa_documentheader-comp_code = 'XXXXX'.
wa_documentheader-doc_date = '20060620'.
wa_documentheader-pstng_date = '20060620'.
wa_documentheader-doc_type = 'XX'.
wa_documentheader-username = sy-uname.
wa_documentheader-ref_doc_no = 'XXxxxxxx'.
wa_documentheader-header_txt = 'Text Header.
wa_documentheader-bus_act = 'XXXX'.
*it_currencyamount
wa_currencyamount-itemno_acc = '1'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = 1943.
APPEND wa_currencyamount TO it_currencyamount.
*it_accountpayable
wa_accountpayable-itemno_acc = '1'.
wa_accountpayable-gl_account = '1234567890'.
wa_accountpayable-bus_area = 'DIV'.
wa_accountpayable-item_text = 'Text 1 XXxxxxx '.
wa_accountpayable-pmnt_block = ''.
APPEND wa_accountpayable TO it_accountpayable.
*it_accountgl
wa_accountgl-itemno_acc = '2'.
wa_accountgl-gl_account = '1234567890'.
wa_accountgl-item_text = 'Text 2 XXxxxxx'.
wa_accountgl-bus_area = 'DIV'.
APPEND wa_accountgl TO it_accountgl.
wa_currencyamount-itemno_acc = '2'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = ( 1943 ) * -1.
APPEND wa_currencyamount TO it_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
EXPORTING
    documentheader = wa_documentheader
TABLES
    accountgl      = it_accountgl
    accountpayable = it_accountpayable
    currencyamount = it_currencyamount
    return         = it_return.
clear it_return.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
      EXPORTING
        documentheader = wa_documentheader
      TABLES
        return         = it_return
        currencyamount = it_currencyamount "currencyamount
        accountpayable = it_accountpayable "accountpayable
        accountgl      = it_accountgl "accountgl
      EXCEPTIONS
        OTHERS         = 01.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

Mandatory fields for vendor master load

Hi Experts,
what are the mandatory fields for the vendor master upload? how can I find that?
Thanks for the help.

In addition, you can also refer the links:
http://www.auditnet.org/docs/SAPR3AccountsPayable.txt
http://users.ev1.net/~gmorris/securitydocs/SAPR3AccountsPayableMatrix.doc
Hope thisll give you idea!!
<b>P.S award the points.!!! !!!</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Mandatory Field for Entering Delayed Reason for project during scheduling .

Hi Friends
Here I have a question on "Scheduling"?
My Client want an mandatory field for entering the delay reason if any phase or tasks or project definition get delayed.
Your input would be highly appreciated
Regards,
YAGHAG

Hi Abhijit,
Thanks for your prompt reply.
I am implementing cprojects 4.5 in PLM 7.0 and not in PPM 5.0.
Regards

Mandatory field for TIN No, or Contact Person

HI Expert,
Can anyone please tell me code for Mandatory field for TIN number or Contact person at the time of adding Purchase Order.its possible by SP i tried for it but its variable so pls anyone have any idea.
Sudhir

Hi Sudhir,
Try This.
FOR Contact Person-----
IF EXISTS (SELECT DocEntry FROM [dbo].[OPOR]
WHERE
((CntctCode IS NULL OR CntctCode = '')
AND DocEntry = @list_of_cols_val_tab_del))
BEGIN
SELECT @error =1, @error_message = 'Your Error Msg1'
END
END
For TIN No.-------
IF (@object_type = '22' AND @transaction_type= 'A')
BEGIN
IF EXISTS (SELECT DocEntry FROM [dbo].[POR12]
WHERE
((TaxID11 IS NULL OR TaxID11 = '')
AND DocEntry = @list_of_cols_val_tab_del))
BEGIN
SELECT @error =1, @error_message = 'Your Error Msg 2'
END
END
Regards
Ashutosh T

Mandatory fields for VF01, ME51, XD01, Co40

can anyone tell me the mandatory fields for the tcodes to do BDC:
VF01
ME1
XD01
CO40

Hi,
ME51,VF01 -- No mandatory fields for these transactions.
XD01-- account group and customer number are mandatory.
CO40- Planned order mandatory.
Regards,
Jagadish.

Make material as a mandatory field for a particular document type in PR

Hi,
Currently we are in SAP 4.6c version. There is a business requirement for making material as a mandatory field for a particular document type of purchase requisition as they don't want the user to raise non material purchase requisition using that document type. The field for material is currently not available in the configuration for Define Screen Layout at Document Level for purchase requisition.
So could you kindly let me know the possible options to prevent user from raising a non material purchase requisition using that document type. If not could you kindly suggest me the user exits available at the time of saving purchase requisition which i could use so that we can write a code to check if the material number is entered or not. If not entered prevent the user from saving the purchase requisitions.
Also it would be helpful if you could let me know how the fields for enjoy transaction (like material,document type) can be made available for selection in the configuration for Defile Screen Layout at Document Level for purchase requisition.
All you help in the solving the above problem is highly appreciated.
Thanks & Regards
Ram

Hi,
Check below method works out for you, if you do not want to proceed with any ABAP development.
Have a custom field selection key with Material Description field as "Mandatory" and "Display" in Basic Data, Item selection group.
Assign this to your PR document type which need material as mandatory. With this you are making user to enter material indirectly as mandatory & user will not have an option of entering text which avoids indirect / service procurement.
"Material Group" option won't help as User can have default settings with some value and it updates even in display mode of field.
Regards,
Ram
Edited by: Ramprashanna S on Jan 11, 2012 11:51 PM

Manage Person - Mandatory field for Singapore

Hi,
User requirements have changed and what seems to be marked as a required field for new people in Singapore (field is "Legal Name") is no longer required. I was not involved in the initial implementation.
The only place I've seen to add/remove required name fields and set a mandatory flag is under the "Manage Person Name Styles" task - but when I try to remove it there I get the following error:
Warning: You cannot deselect a name component that is predefined as required. (PER-1531563)
You cannot deselect a name component that is predefined as required. (PER-1531563)
Can anyone help ? Much appreciated!

Hi, Have you looked if the name fields are set to required in a customization? The documentation that details how to manage customizations is here.

Overiding Mandatory Fields for master Agreement Template

Hello,
In the standard creation of the master agreement template the CONTACT field is mandatory. To me, this does not make sense because a template would need to be created for every contact/supplier. We want to make the CONTACT field optional for master agreement templates. I am trying to create a page customization with the following properties to accomplish this:
UI ID:contracts.contract.ui.buyside.default
Name:Master AgreementParent
Class: Master Agreement
Field ID: Contact
Property: required
Value: no
Dimension on parent set
Dimension Field : IS_TEMPLATE
Dimension Field Type: Boolean
Dimension Value: yes
I can not seem to make it work. Any suggestions? Is this even possible?
Thanks in advance,
Kyle

Thanks for the quick reply. I was hoping to avoid a dummy vendor. This is sure a strange piece of software.
Kyle

Set required fields for listbox RP_OPTIONS_INTO_STRING

Hi Experts,
I want to creat a listbox using FM RP_OPTIONS_INTO_STRING.
And I want to set some fields as mandatory fields such as Personal number and
Company code. I noticed there is a column in the component named 'Requried'
Does anyone know how to set value for 'Required'?
Thanks in advance!
Graham

Hi,
In the properties of window of the field goto Program tab then input dropdown -->set as required.
Regards,
Nachy

Set mandatory fields for MSC2N, MSC3N

Similar Messages

Maybe you are looking for