Set maximum number of BPM nodes
Hy all,
can someone tell me how can i set the maximum number of bpm node in XI.(Transaktion for example)
Thank's a lot.
Mat
Hi Jürgen,
You can try changing this with TCODE: SWPA
"Maximum node number" parameter
By default the value is 10.000 (at least on my DEV XI)
maybe this will help you
Regards,
michal
Similar Messages
-
Illustrator won't run: "unable to set maximum number of files to be opened"
I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
CCHi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
http://forums.adobe.com/message/2534652
If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
Thanks! -
How to set maximum number of jobs in oracle
Could pls tell explain me about how to set maximum number of jobs in oracle....
Regd,
MahiI don't think there is any limit on number of jobs that can be submitted to Oracle. However, there is a limit on the number of processes that would execute those jobs (governed by JOB_QUEUE_PROCESSES).
Message was edited by:
Satish Kandi
Typo corrected. -
Maximum number of server nodes for a dispatcher
Hi,
Is there a maximum (recommended) number of server nodes that can be created per dispatcher, for the 6.40 J2EE Engine? We are considering using a 16GB RAM server with 1 dispatcher and 8 server nodes to run our EP6 SP18 portal. Are there any implications we should be aware of with this setup? Is there any additional configuration for the dispatcher necessary for a high number of server nodes?
Any advice greatly appreciated, points will be awarded.
Many thanks
JaneAlexander Türk wrote:
> Hello,
> at the moment under aix, 64bit, nw2004s the maximum number of server nodes is 16.
> regards,
> alexander
Hello,
at the moment under aix, 64bit, nw2004s the maximum number of server nodes is 16.
regards,
alexander
Hi Alexander,
Thank you for the information.
Is this information documented somewhere in SAPNote or help.sap.com ?
Regards,
Prashanth -
Set "Maximum number of recipients" option for specific users in Exchange 2010
I have some set of users who usually send bulk emails outside. I need to increase the value for these users for"Maximum number of recipients" as 999.
Any help or suggestion is appreciated.
Thanks,
RIWAA
RIWAHi Riwa ,
Really sorry for providing the wrong value on MaxRecipientEnvelopeLimit in my previous post.
The default value for MaxRecipientEnvelopeLimit is 5000
Reference Link : http://technet.microsoft.com/en-us/library/bb124151%28v=exchg.150%29.aspx
MaxRecipientEnvelopeLimit
Optional
Microsoft.Exchange.Data.Unlimited
This parameter is available only in on-premises Exchange 2013.
The MaxRecipientEnvelopeLimit parameter specifies the maximum number of recipients in a message. The default value is 5000. The valid input range for this parameter is from 0 through 2147483647.
If you enter a value ofUnlimited, no limit is imposed on the number of recipients in a message. Exchange treats an unexpanded distribution group as one recipient.
ANDY thanks a lot for intimating and making me to have a clear understanding on this case.
Thanks & Regards S.Nithyanandham -
Set maximum number of responses allowed for a form
Would it be possible to set a maximum number of responses allowed for each form? Say, if more than 1000 responses are received, the form will be closed automatically and no more new submission can be made.
Thanks in advanceHi,
FormsCentral doesn't support this functionality. Currently 50, 500, 5000 limits are set for free, basic and plus accounts, you cannot set a different limit for individual forms.
Thanks,
Wenlan -
Setting maximum number of image buffers in MAX in IMAQ vision builder
To aquire large number of images using duncan Technologies Camera (7f/s) on IMAQ PCI 1424 i'm supposed to set the maximum number of buffer images in MAX(Measurement and Automation)in IMAQ vision builder. But i do not see the option for specifying the maximum number of image buffers under the properties of PCI 1424. Please advise.
Thanks in advance.The setting is somewhat difficult to locate.
In MAX, select "Tools" on the main menu bar. Under that, select "IMAQ". The only option that comes up is "Max number of buffers".
Bruce
Bruce Ammons
Ammons Engineering -
Trying to set maximum number of calls
Hi,
im pretty new to this topic and i would appreciate some hel...
I try to set the maximum number of calls to 3.
As far i understand it is done by XML script under phone service, but thats about it...
where do i ha ve to change this value in database...
Thanks for helpThanks for ur reply,
its correct that i meant (Multiple Calls/Call Waiting), and i know how to change that inside CallManager, but i want to make it accessible for the phone user on the display, and obviously only for his own phone number.
That s what i m trying to do, write an XML application and put a field on the display so the user can change that by himself.
May be u can give me a hint where i find the chapter in the documentation.
Thanks a lot -
Setting maximum number of records per page
Hi All,
Can anyone tell me how can i set the maximum number of records that should be printed per page in a XML REPORT. How can i write the XML tag for this.
thanks in advance,
siddamHi ,
Please check bi publisher blog from TIM.
http://blogs.oracle.com/xmlpublisher/2007/03/27
it will help you out.
Regards
Ratnesh -
How do you set maximum number of concurrent users to OBIEE
In a training session for the end users - only 4 users could connect - after this others could not connect - got NQS Error:100118 Access for the connection is refused
As I don't see any configuration tag to specify concurrent users.
Try this, go to connection pool (within RPD) and set the maximum number of connections, this does correspond to number of concurrent connections to database but not concurrent users.
mark posts promptly.
-bifacts
http://www.obinotes.com
J
Edited by: bifacts on Dec 21, 2010 12:14 PM -
Set maximum Number of post in News Feed WebPart
Is it possible to configure maximum number of Posts in News Feed webpart under following and EveryOne.
Also would like to know more about Newsfeed webpart internal functioning. Any link woud be really helpful.
Ashish Baranwal To know what you know and what you do not know, that is true knowledgeHi Ashish,
The Newsfeed contains recent activities from followed entities. The
Newsfeed displays 20 items and is sorted in reverse chronological order. Items listed in the
Newsfeed are activities from entities a user follows, and conversations from any site feeds the user follows.
The Everyone feed shows the last 20 posts or replies across all users. The distinction between the
Everyone feed and the
Newsfeed is that the
Newsfeed only shows activities from entities the user is following.
More information, please refer to:
http://technet.microsoft.com/en-us/library/jj219700.aspx
There is not an OOB way to change the max number of posts in Newsfeed. You may try to use Code to achieve it. Here is a similar post for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/545b139c-8c07-48bc-93e4-3b1ef5f4bad2/community-site-newsfeed-posts?forum=sharepointdevelopment
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Is there a set maximum number of item s in the xml feed?
Is there a limit to the maximum number of <item>s allowed in the .xml feed for publishing on iTunes?
That is, does there come a point where old items have to be deleted before new ones can be added?
PC Windows XPI would imagine most people submitting such a large number of jobs are using something more robust like Qube:
http://www.pipelinefx.com/products/qube-film.php
Qmaster is very buggy and would need a complete rewrite before it could be qualified for use in such an environment. -
How to set maximum number of data points displayed on waveform chart?
I have a waveform chart set to x-autoscale, but after about 1000 data points, it begins to scroll again. How can I display all of the data points being collected, say 2000 points?
Right click on the chart and select Chart History Length. Enter the value that you need. The maximum is 2147483647 points.
-
ORA-30936: Maximum number of XML node elements exceeded
I get this error on XmlType.toObject applied to a valid Xml instance (verified outside XmlDb)
When repeating the test on various documents, the error message always refers to the first child node of the root element, even an attribute, for which maxOccurs is meaningless.
The instance is provided via HttpUriType.getBLob and UTF-8 encoding.
Help highly appreciated !
Robert.Found a workaround: insert Xml instance into XmlType table, then toObject after select is OK !
Probably character set encoding issue. -
Set maximum number of line in text area
Hi !
I need to limit my text area to 3 lines. How do I do this ?
I was thinking about character limitation but if the user
press "enter" 3 times, I'm screwed since it is only 3 characters
but it bust my 3 lines limit.
Thx guys !You should never limit them to a set number of lines. Go for
character limitation and test the input value before allowing them
to submit the form.
Maybe you are looking for
-
How do I transfer emails from Entourage to imail?
I recently downloaded Lion OS and I need to start using imail instead of Entourage. How do I tranfer over all of my old emails and files?
-
DreamColor Monitor from PC via VGA: Color-Space & Settings?
Context: Premiere CC on a WIndows 7 laptop with an external DreamColor monitor connected via VGA port (for convenience rather than bit depth). What color space is appropriate in the DreamColor settings, i.e. what is the VGA likely to be supplying?
-
Why are icons showing thru folders?
In my dock my app folder my dowload and document folder all has the contents showing thru the folder.
-
ISE 1.1.4 patch not installing
I have a standalone ISE, running at 1.1.4.218. I am attampting to upload/install the patch bundle, and nothing appears to happen. Under patch management, I see "no data available". In the Operations Audit reports, there is no record of a patch instal
-
I'm trying to download a trial of Muse CC, but it isn't listed under the available apps on my CC Installer. I currently run Mavericks on my MacBook Pro. Please help