Set maximum PARALLEL threats

Hi,
is it possible to set a maximum on the PARALLEL processing for a mapping? Can i do it by changing it in the package?
regards,
Osman

You could achieve some influence by setting the parallel properties of the table
alter table x parallel 8
etc.
The Degree of Parallelism that your query executes with is actually quite a complex subject. (See e.g. http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/bus_intl.htm#sthref2488).
Regards, Erik

Similar Messages

  • What to set maximum simultaneous connection to?

    Hello
    What do I set maximum simultaneous connection to (web server settings)? In Apache manual you can calculate "maxClient" by taking the avaiable free RAM and split that with the memory each httpd process using. In my case that would be: 6000 / 15 = 400 maxClient.
    But in Apples "Web tech admin" pdf they write: "...Browsers often request several parts of a webpage at the same time, and each request creates a connection". Does that really mean that every image need a separate connection – or have I missunderstand anything?
    At the moment I have it set to the default 1024. But, CPU usage is very often in the 90-100% region… So, should I go by Apache's definition or Apples default?
    Best regards, Magnus

    You'll want to look at where the CPU time is going across everything that is going on, and at how much memory is in use; at a more holistic approach toward tuning.  Unless you're getting a substantial load on Apache or unless you're very marginal on available memory, tweaking the maximum processes isn't usually a huge win.
    If you are looking at comparatively large volumes of http traffic and that 90-100% CPU is largely web-related, then you'll want to profile the server using the Safari or other tools, and look at optimizations and at web caching, and potentially at adding web servers.
    And yes, a web browser can have multiple parallel connections into a web server.
    The maximum connections stuff sets up the numbers of Apache http client processes, which is why you're looking at memory with that discussion you've found.
    Something similar to this command will get you the accumulated CPU time and the memory (rss) size for the Apache processes:
    ps -A -o ucomm,rss,time | grep -i httpd
    There are Apache tuning articles around the 'net, but I'd first make sure it's Apache that's soaking up the CPU time and not some other constraint.

  • Illustrator won't run: "unable to set maximum number of files to be opened"

    I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
    CC

    Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
    http://forums.adobe.com/message/2534652
    If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
    Thanks!

  • Set maximum size in Text Form Field Options for a field in bi publisher RTF

    Hi All,
    How to set maximum size in Text Form Field Options for a field in bi publisher RTF.
    I have a RTF whch is having a field in that i need to add some validation condition but after adding certain condition in Add help text tab ,it is not accepting after certain length, how i can increase the length to unlimited,please help me on this
    Thnaks

    Form fields have some restrictions if your are using version lower than 11g.
    They can accommodate only 393 chars. You can add the text in both status bar and help key, which can in total consume 393 chars.
    If your code logic is more than that, it can be split into multiple form fields as Avinash suggested or you can use sub template logic and handle coding over there. Again in sub template code can be within/outside form fields.
    So there is no option for user to increase the size of form field.

  • IView Deployment - how to set maximum file size?

    Hello,
    we have a problem while deploying iViews and uploading files to enterprise portal . The maximum upload file size seems to be limited to 1 MB. I have to deploy an iView greater than 1 MB. While deploying with netweaver developer studio I get following error message
    in logfile of developer studio:
    [19.10.04 / 13:33] #ERROR LEVEL#
    com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > No Information
    java.io.IOException: Error writing to server
    The direct upload of *.par with EP Component Manager also does not work. After clicking upload-button I get a standard http error page "aktion abgebrochen".
    Also on upload of any other document, for example personal documents which are bigger than 1 MB, I get this error.
    If I reduce file size of portal archiv lower than 1MB I can deploy and upload the iView.
    How canI set maximum upload file size in Enterprise Portal?
    Our Version: 6.0.2.4.7.Enterprise_Portal_Service_Pack_2
    Thanks for helping me,
    Nicole

    You need to use a precision argument:
    String foo = "a long name to print";
    System.out.printf("foo say: %.8s", foo); // 8 maxhttp://java.sun.com/j2se/1.5.0/docs/api/java/util/Formatter.html#syntax

  • How to set maximum number of jobs in oracle

    Could pls tell explain me about how to set maximum number of jobs in oracle....
    Regd,
    Mahi

    I don't think there is any limit on number of jobs that can be submitted to Oracle. However, there is a limit on the number of processes that would execute those jobs (governed by JOB_QUEUE_PROCESSES).
    Message was edited by:
    Satish Kandi
    Typo corrected.

  • Set maximum server memory by using sql scripts

    Dear all
    How to set maximum server memory by using sql scripts in sql server 2014? Thx a lot
    Best regards,
    Wallace

    You can use
    sys.Sp_Configure to set max server memory
    Here are some recommendation for Max Server memory based on RAM size
    GB
    MB
    Recommended Setting
    Command
    16
    16384
    14745
    EXEC sys.sp_configure 'max server memory (MB)', '14745'; RECONFIGURE;
    32
    32768
    29491
    EXEC sys.sp_configure 'max server memory (MB)', '29491'; RECONFIGURE;
    64
    65536
    58982
    EXEC sys.sp_configure 'max server memory (MB)', '58982'; RECONFIGURE;
    128
    131072
    117964
    EXEC sys.sp_configure 'max server memory (MB)', '117964'; RECONFIGURE;
    256
    262144
    235929
    EXEC sys.sp_configure 'max server memory (MB)', '235929'; RECONFIGURE;
    512
    524288
    471859
    EXEC sys.sp_configure 'max server memory (MB)', '471859'; RECONFIGURE;
    1024
    1048576
    943718
    EXEC sys.sp_configure 'max server memory (MB)', '943718'; RECONFIGURE;
    2048
    2097152
    1887436
    EXEC sys.sp_configure 'max server memory (MB)', '1887436'; RECONFIGURE;
    4096
    4194304
    3774873
    EXEC sys.sp_configure'max server memory (MB)', '3774873'; RECONFIGURE;
    Hope this will help
    Glad to help! Please remember to accept the answer if you found it helpful. It will be useful for future readers having same issue.

  • Set maximum record time?

    Can I set maximum record time in Logic 8? Recording an hour-long live program unsupervised, & I'd like it to stop afterwards.
    (I don't know any problem with continuing recording for hours until the hard drive is full? But it's not necessary.)
    thanks

    You can use the Auto-Punch In/Out function to set Logic stop recording automatically.
    Also, set the bar value for the project end (at the transportbar, under the tempo).
    For How long you can record depends on you HD capacity, but also the file format (aif,wav,caf...) the bit depth and the sample rate.
    each format has its own limit.
    Refer to user manual and check for the best file format for your purpose.

  • How to set Content Set from 'Parallel' to 'Sequential' in Report Manager?

    Dear All,
    How to set Content Set from 'Parallel' to 'Sequential' in Report Manager?
    Thanks,
    Jackie

    Sorry, Please ignore, thanks...

  • How set maximum of characters for the columns

    Hello I use a JTable and I want to set maximum of characters for the columns.
    For example column 1 max 10 characters, column 2 max 20 characters, etc..
    How can I do this?

    The principle is as follows: a table uses certain input components for editing a cell value, e.g. a JCheckBox for Boolean-type values or a JTextField for textual/numerical values. By default, a JTextField doesn't have any size limit, so you can enter as many chars as you want. In order to change this behaviour, you'll have to
    1.) create a JTextField that does have a size limit and
    2.) set a CellEditor on the JTable which uses this manipulated JTextField.
    An easy way for 1.) is to create a custom Document (the internal data representation for text components, the M-part of the MVC -- see javax.swing.text.Document) that doesn't accept any text beyond a given limit, e.g.:
    public class LimitedDocument extends PlainDocument {
      private int max = 0;
      public LimitedDocument(int max) {
        this.max = max;
      public void insertString(int offset, String str, AttributeSet a) throws BadLocationException {
        // too long for the limit; get current contents, insert, and cut off trailing chars
        if ((getLength() + str.length()) > max) {
          StringBuffer buf = new StringBuffer(getText(0,getLength()));
          buf.insert(offset,str);
          remove(0,len); // remove current text contents
          super.insert(0,buf.toString().substring(0,max),a); // insert whole text
        // no problem, will fit
        else {
          super.insertString(offset,str,a);
    }Then, in order to set the cell editor -- for example for the first column --, you can do as follows:
    myTable.getColumnModel().getColumn(0).setCellEditor(new DefaultCellEditor(new JTextField(new LimitedDocument(5),"",5)));This will create a new DefaultCellEditor (see javax.swing.table) and initialize it with a given text field which will be responsible for any edition in this column. As the text field itself is created using a limit of 5, it should accept no text insertion beyond 5 chars.

  • How set maximum character length in Fxml

    Hey can any body help me set Maximum character length in Fxml.
    thanx in advance

    I wrote my own TextField.
    I can't give you the code right now, but it's easy to create it by yourself.
    0 - create a private method that deletes any unwanted char/s: restoreRightLength();
    1 - Add a listener on the textProperty of your TextField/TextArea that calls restoreRightLength() method.
    2 - Override  the following methods:
    @Override
    public void replaceText(int start, int end, String text) {
    super.replaceText(start, end, text);
    restoreRightLength();
    @Override
    public void replaceSelection(String text) {
    super.replaceSelection(text);
    restoreRightLength();

  • Set Maximum size for a subpanel created with splitter bars in LV8

    Does anyone know how to set the Maximum size for a subpanel created with asplitter bar? If I show one cluster in the subpanel and use the scroll bar to scroll, I can see more (blank) area than I want. I just want the user to be able to scroll a cluster within a subpanel while the cluster is larger than the view area of the subpanel. I don't want to let the user scroll outside the cluster.
    Ravi Beniwal

    I apologize for the mixup in terminology. Please read Pane wherever the word Subpanel was used.
    Please see the attached VI for a description of my problem.
    I would really appreciate any help with this.
    Ravi Beniwal
    Attachments:
    Pane Scrolling Problem.vi ‏10 KB

  • Dynamically set maximum row count in Interactive Report

    Hi,
    Has anyone worked out a way of dynamically setting (e.g. via select list) the maximum row count value for an Interactive Report, taking into account issues with order by when the report is filtered. I'm aware of solutions like this: http://www.talkapex.com/2010/10/apex-reports-no-limit-downloads.html but as far as I can tell this doesn't work when the report is filtered and the IR is rewritten in the background. Data sets then become unreliable because they are reordered.
    Thanks,
    Mike

    Hi Mike,
    You can do that with javascript
    gReport.search('SEARCH',100)the 100 you can replace for any number you like.I have a report with filter,sorting and groups and it is gives no problem there.
    any number means any number but not higher than the number you set at Maximum Rows Per Page.
    You probably can mix the solution from Martin and the above code.
    Regards,
    Kees Vlek
    <tt>Company: http://www.orcado.nl
    Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
    Twitter: http://www.twitter.com/skier66</tt>
    If the question is answered please change it to answered and mark the appropriate post as correct/helpfull.
    Edited by: kvlek on 24-apr-2013 12:29
    Edited by: kvlek on 24-apr-2013 12:35

  • Set maximum panel size

    Hi,
    I would like to know how can I set the maximum panel size, in order
    that when I maximize it with a state property node set to 5 (maximized)
    when I open it, it don't pass the size I want for that panel.
    How Can I do It? I can set the minimum panel size, in File->Vi
    properties->Window size but I can't set the maximum panel size?
    Thanks,
    ToNi.

    Hi,
    From my vi, before I call another vi from it, I have a FP Open and FP.
    State property set to True and 4 (Minimized) respectively and then I
    use a Run Vi invoke node and finally, after it, I have another FP.
    State property set to 1 (Standard). My front panel  when opens has
    the same size as I saved it but LV not redraws it well. How Can I do to
    solve this kind of problem? I have this problem since a lot of time ago.
    ToNi.
    Attachments:
    sample.JPG ‏40 KB

  • How to set MAXIMUM size of a formatted string?

    Hello
    Assume I have an Object foo with a
    toString(){ return "a long name to print"; }and that I want to print it with minimum space of 40, I would say
    System.out.printf("foo say: %1$40s", foo.toString() )But I need very often to set a maximum width, so that any strings or fields wider than this is truncated. Eg:
    System.out.printf("foo say: %1$5s", foo.toString())gives i.e. "foo say: a l..". Is this possible, using the Formatter class (or similar) in Java? So far I have created my own class to enable this, but I want to use as much predefiend classes as possible.
    Regards
    Fluid

    You need to use a precision argument:
    String foo = "a long name to print";
    System.out.printf("foo say: %.8s", foo); // 8 maxhttp://java.sun.com/j2se/1.5.0/docs/api/java/util/Formatter.html#syntax

Maybe you are looking for