Set Memory of Geforce Go 7600 in Satellite A100-819

I just bought a A100-819 and according to the specifications the Geforce Go 7600 has 256Mb of dedicated memory. However, when I check the properties I see it shows 256Mb dedicated memory and 255Mb shared memory. How do I turn of this shared memory?

DXDiag info:
Display Devices
Card name: NVIDIA GeForce Go 7600
Manufacturer: NVIDIA
Chip type: GeForce Go 7600
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0398&SUBSYS_FF101179&REV_A1
Display Memory: 504 MB
Dedicated Memory: 248 MB
Shared Memory: 255 MB
Current Mode: 1280 x 800 (32 bit) (60Hz)
Monitor: Generic PnP Monitor
Driver Name: nvd3dum.dll
Driver Version: 7.15.0010.9746 (English)
DDI Version: 9Ex
Driver Attributes: Final Retail
Driver Date/Size: 12/7/2006 21:25:00, 3055616 bytes
Strange, isn't it. What could be a solution?

Similar Messages

Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

Greetings to all!
Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
Would be glad to realize how to solve this... Thanks a lot.
Satellite A100-599
Current OS: Windpws Vista Home premium sp1.
Message was edited by: Airtoground

I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
Contents and Installation order
for Windows VISTA
Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
- SLP Module OEMSLP2.0
- Sun Java 2 Runtime Environment v1.6.0
1 KB928190(For updated USBHub.sys) KB928190
2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
*5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
I found this driver but it says "no suitable driver found, installation wizard stops its work".
Any ideas what could it mean?
Thanks to all.

Satellite P100 - graphic card nVidia Geforce Go 7600 crashed

Hello!
My graphic board has crashed and, after removing dozens of screws, i've verified it's not integrated in the motherboard. I could disassembled it after removing the last three screws.
- My laptop is a Toshiba P100-342 (PSPA3E-0QE038SP)
Here, you can see the model number: http://imageshack.com/a/img856/1917/6s6f.jpg
- The graphics card is a nVidia Geforce Go 7600.
Here you can see it on the motherboard: http://imageshack.com/a/img834/5825/ktl8.jpg
And here, alone on the table: http://imageshack.com/a/img839/3525/6of6.jpg
This is the nVidia chip: http://imageshack.com/a/img836/4343/q7lg.jpg
Searching in the internet, i've found just 1 graphic card similar to mine. But i'm not sure if it'll run, because i've read the devices must be exactly the same as the original:
http://www.ebay.es/itm/NEW-Toshiba-A000013050-Nvidia-G73M-128MB-GeForce-Go-7600-Video-Graphics-Board-/360821279000?pt=PCC_Video_TV_Cards&hash=item54029f c918&_uhb=1
I asked the eBay seller about the compatibility and his answer was: "Please contact Toshiba for complete product compatibility." But Toshiba doesn't provide any support after the warranty expires (almost in Spain).
Anyone has replaced this graphic card? Do you think i should buy this ebay's graphic card? Are there any other solutions? (for example: replacing the whole motherboard...)
Thank's very much in advance.

I never had to replace an graphic card in a notebook but I would not purchase any part if Im not 100% sure if it would be fully compatible with my notebook.
Fact is that SATELLITE P100-342 was equipped with an NVIDIA GeForce Go 7600 (code name G73M) PCI Express x16 (GDDR2 256GB dedicated RAM) graphic card.
The part on ebay supports only 128MB and therefore I think both parts are not the same.
This could be the reason not to purchase this part.

Mid-2009 MBP, 2.8Ghz Core 2 Duo, 4GB memory, NVIDIA GeForce 9600 512 MB can't run Windows 8?

I have a 17" mid-2009 MacBook Pro with a 2.8GHz Intel Core 2 Duo, 4GB memory, NVIDIA GeForce 9600M
GT 512MB. Recently upgraded to OS X MAvericks 10.9.4. I wish to run 3DS MAx Design using Boot CAmp.
The Boot Camp Assistant, downloading the Windows installers says my system can only run Windows 7. [The newly-opened Windows 8.1 disc is right here.] Can this be right? Might you please identify the weak point? Should I upgrade? Is the memory the reason? Is the assistant wrong? What should I do.
Using 3ds max, would it be wise to upgrade the memory in any case. When the correct Windows softyware is determined and installed, how large should I set the partition. Thank you for helping me.

Thanks, Kappy. Please, I'd read those system requirements before; I still don't understand where my system falls short. Both 7 and 8 stipulate a 1GHz processor. Graphics card I don't know the difference. So it's memory- I have insufficient accesible memory? If my purpose is to manipulate highly featured images, should I upgrade memory in any case. Does it make much difference whether it's 7 or 8? Some places I know my footing. Here, not. Step by step. Thanks!

Best preference settings for MacBook Pro Retina Mid 2012 with 2.7 Ghz Core i7 processor 16GB memory Nvidia GeForce GT 650M 1024MB processor

(using latest AE CC2014)
I have a MacBook Pro Retina Mid 2012 with 2.7 Ghz Core i7 processor 16GB memory Nvidia GeForce GT 650M 1024MB processor, doing some heavy AE renderings and just realized that this machine says it has 8 Cores? I'm had not yet turned on Multprocessing in Preferences Should I be?
Should I leave 1 or 2 cores for other applications?
RAM allocation per background CPU is defaulted set to 3GB
Also for Adobe Media Encoder: in preferences under Video Rendering /Rendere it is set at Mercury Playback Engine GPU Acceleration (OpenCL) is that the best config for this computer?

How much ram?
The best settings depend on what you are working on. Here are mine for a nearly identical system:
It's usually best to keep memory blocks in 4GB blocks. If my workflow is more in other apps I'll switch out other apps to 8 gb if things start to slow down. Because of my usual project settings I keep MP turned off on this machine, but for some projects I'll turn it on. If you decide to experiment to MP then keep an eye on the Actual CPU's that will be used and make sure the numbers add up. Other applications and Actual Cores should add up the the total in your system.

Memory upgrade on a Satellite A100-912

I own a Satellite a100-912 and I want to upgrade its memory!
As it seems, this model supports only PC2-4200 DDR2 SODIMM modules (533 Mhz). Before bying a memory module that might regret, I want to know if there will be any compatibility issues if I use to this laptop PC2-6400 DDR2 SODIMM module (800 Mhz).
Is it going to work even at lower clock speed (533 Mhz) or is it going to be a total waste of money?

As far as I know the FSB is able to handle 667Mhz modules.
You can use lower modules (533Mhz) without any problems but modules with higher Mhz will not run with full speed due to the limited FSB.
So I dont recommend buying 800Mhz modules. Firstly they are not supported and secondly its waste of money!

Memory upgrade on Satellite A100-467

Hello!
I wold like to upgrade my laptop memory from 1gb to 4gb. I got the Satellite A100-467.
What is the best memory for me?? I will get the Win7 32bit OS
Can I use this http://www.fcenter.ru/products.shtml?eshop/act=h:a:0:115:a:a:a:0:a:1:30:r:1:1&oper=74198 (SO-DIMM DDR2 SDRAM SEC (PC6400,* 800MGz*, CL6) or only 533?
Thannks for the help

FSB speed on mainboard is 533 MHz and compatible modules are DDR2-533 but you can use DDR2-667 RAMs. 2 GB RAM has part number PA3513U-1M2G.
More info about compatible RAMs you can find on KINGSTON page.
Check it out.

Need help with memory upgrade on Satellite A100-250

Help me with upgrade memory on TOSHIBA Satellite A100-250 up to 1024 mb.
I want to buy another slat of memory ddr2-533 512 mb, what exactly model am I necessary to search, that they worked in a pair.
Sorry for bad english. From Russia with Love.
PS. I like drink russian vodka :)

Hay
Your notebook can be upgraded up to 2 GB and compatible RAM is DDR2-400/533 1GB (PA3411U-1M1G).
Use this part number in Google and you will find it.
Bye and dont drink too much Vodka. ;)

Satellite A100 shuts down after memory upgrade

Consider me as 1 of the thickie bunch.. Not even sure wot im talkin bout but here goes n e way...........
Have a Satellite A100 570 ( PSAA2E)..........
Have tried several different online sites lookin for memory upgrade. Didn't have the witt to use toshiba site...... Ended up going with Crucial.........
Ran diagnostic on laptop and was sent the module a needed.or so i thought....... wrong 1 or 1s as i bought 2 x 1G modules in order to " double up".....
Got my money back as they were not compatable with my system.. something to do with density problems....
Tried company called OFFTEK........ they seemed to know what they were talkin about....... I have from Offtek. at present a..........
200 Pin 1.8v DDR2 PC2-4200 SoDimm....... but Toshiba have recommended below......
1GB PC2-4300 DDR2 Memory (533MHz)
Part Number: PA3411U-2M1G
1024MB (1GB) Memory PC2-4300 DDR2 (533MHz)
Theres an obvious difference ...... 4200 and 4300. But im not sure if its a significant difference........... or what it means
Have updated bios to most recent version and basically updated everything toshiba had to offer for this model...........
Ran EVEREST and it recognises the 1G module but when i take out the original 512mb module the laptop starts for about 3 seconds then shuts down...
this repeats about 5 times then complete shutdown.....
I dont like opening the back cover too often but this is the 3rd module ....
Not sure whats meant to happen if the module is working...i.e start up message..not sure if windows recognises 1G module....
Would it be safer bet to send Offtek module and stick with toshiba option.....
Thanks in advance.....

Cheers R2........ suppose at this stage i could start rhyming off a load of star wars lines but uve probably hears them all before.......
N e way......... checked out the link u posted..........very useful......
The module described is identical to what i have.............As with previous reply ( above ) im not sure what to do.........might take up Offteks offer of replacing the module but slightly concerned it might have same outcome......Still not happy bout opening the cover so much........nut needs must i suppose

Set memory cache - automated row fetch

I would like to know more about the difference between
Set Memory Cache On Display and
Set Memory Cache On Fetch
option, given in the Automated Row Fetch process.
I noticed that it makes a difference in some cases - especially where I have a master-detail relation and need to perform multiple drill down:
e.g. the report shows what was expected but export to .csv returns no rows. After switching from the default 'Set Memory Cache On Fetch' to 'Set Memory Cache On Display' everything works fine.
Where could I find something about this option?
Denes Kubicek

Denes - I'd need to see an example to explain it. It is not the behavior I would expect. Can you create a simple test case on htmldb.oracle.com? Please post the workspace name and app/page ID when you have it.
A bit more info: when the DML Fetch Mode is set to 'Set Memory Cache On Display', references to items sourced by the fetch, say &P1_ENAME., will not return the value that would be displayed in the form item P1_ENAME until after the code that emits P1_ENAME executes. So if your page had a before-header DML Fetch process that fetched a value for P1_ENAME (from EMP) and region A that displayed conditionally based on P1_ENAME = 'SMITH' and then region B containing the form item P1_ENAME and then region C that displayed conditionally based on P1_ENAME = 'JONES', the condition on region A would not see the fetched value of P1_ENAME but the condition on region C would see the value. However, if you set 'DML Fetch Mode to 'Set Memory Cache On Fetch', the condition in region A would see the fetched value.
When you have a csv link or chart region that references a value from session state, that value must have been committed to session state (which happens when you run a computation, do an explicit assignment or "select into" a bind variable associated with a page or application item, or when you submit a form) in order for the csv or chart page to access the current value.
Scott

Problems with NVIDIA Geforce Go 7600 display driver for Qosmio G30

A few days ago my Qosmio G30 ( Windows XP) didnot start properly. First the srceen become white and after a few reboots the screen shows a lot figures and after that I get the a lot of vertical stripes over the screen. I only can start in protected mode of windows but the vertical stripes stay.After consultating the Toshiba help desk I find on the Toshiba website a driver for the Nividia Geforce Go 7600.
But I cannot installed it because Microsoft Windows XP reported that the software have no digital signiture. When I ignore that message the installtion goes on but without result. The computer gives the message that the Nvidia 7600 is not installed properly.
Please have someone a solution of my problem. (Johnnyboy have reported the same problem )

I sounds like a dying video chip, or at least my p100 had simmilar issues when it needed the video replaced. Odd characters on the screen at random, plus locking up occasionally. Mine failed from excessive heat.

Satellite A100-626 - Maximum system memory supported?

Hi,
I have a Satellite A100-626 with 2Gb of RAM memory.
As stated in specs for this model:
standard : 1,024 (512+512) MB
maximum expandability : 4,096 MB
technology : DDR2 RAM (533 MHz)
expansion module sizes : 256, 512, 1,024 MB
It says that it can go up to 4Gb, but only shows module sizes up to 1Gb. (maybe 2Gb modules didn't existed at the time).
Anyone knows or tested if it is possible to install 2 modules of 2Gb or 1 module of 4Gb to reach the maximum expandability of 4Gb?
Also, does it supports frequency's up to 800MHz? If not, whats the maximum value?
And at last, does DDR3 work on this model?
Thanks in advance for the replys.

Hi
I found this Toshiba product page:
[Satellite A100-626|http://pt.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=PT&DISC_MODEL=0 &ACTION=PRINT_WITH_BACK&BV_UseBVCookie=yes&PRODUCT _ID=119571]
Its a Portuguese Toshiba page because I believe that this notebook model was designed for Portuguese market.
There you can find a info that its possible to upgrade the RAM to 4GB (2 x 2Gb RAM).
But note; the 32bit Operating system will be not able to use the full 4GB RAM.
Just the 6bit OS can use and recognize the full 4GB
> Also, does it supports frequency's up to 800MHz?
This depends on the chipset. If the chipset would allows the 800Mhz then the memory module would run at 800Mhz otherwise they would be clocked down.
> And at last, does DDR3 work on this model?
No, as far as I know just DDR2 modules are supprted.

Wrong nvidia drivers for Satellite A100 (PSAA9)

I downloaded nvidia drivers 97.45 but this driver recognizes my GeForce Go 7600 card as NVIDIA Quadro NVS 110M. Is there something wrong with the drivers?
At nvco.inf I found that there is only support for the latter card. What is happening?

I wrote here last week but nobody answer me. I have Satellite A100-PSAA9 and driver doesnt work on Windows Vista. It says "This driver compatible with Wista Vista" so I'm using Windows Vista Ultimate also Turkish language. I was thinking maybe problem is Turkish version but I see it is not.
I called Toshiba Turkey customer support but they said "We didnt test yet Vista driver, please bring your laptop here. Maybe we will report this Toshiba Europe and they will release new driver soon". I dont want to bring it anywhere, I want some solution.
NVIDIA GeForce Go 7600 doesnt work with Windows Vista Ultimate. Nvidia.com on web sites not release yet any GeForce Go Vista Driver. What does it mean?
Message was edited by: orcamehmet

Graphics card issue - Satellite A100-313 shuts down by itself

I have a satellite A100-313 and I'm using vista.
Everytime when I play games, the notebook shuts itself off after some time. It varies, normally have 10-20min of playing.
And when I immediately turn it on again, I get a black screen but the computer is running. I'd have to wait a while to turn it on again for the screen to work.
So it starts up again and the resolution is changed to 1024x764 (the native resolution is 1280).
I assume it is a graphics card issue (I have a Geforce 7600 Go). I already updated to the latest vista drivers available from the Toshiba site (the one from september).
What can I do to fix this? The automatic shutdown normally only happens when I play games.
Any help is appreciated.

Hm, sounds tricky.
I can suggest you the following:
Download the latest bios for your machine from the toshiba download site:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
And last but not least, check if your cooling system of your machine is not clobbed with dust. You can clean it up with a can with compressed air to remove the dust from the fan and the heatpipe-fin.
If you have some questions, just ask.
Nice weekend

Satellite A100-750 PSAAR, 4GB RAM installed, 3GB RAM usable

I've just upgraded the RAM of my Satellite A100-750 from 2x1GB to 2x2GB.
The BIOS recognizes 4GB of RAM
but then the BIOS output states "3GB system RAM passed".
My Windows 7 Pro 64bit OS says that there are 4GB RAM, but only 3GB are used.
How can I use all my 4GB RAM?
It shouldn't be an OS issue but maybe a BIOS one.
I've tried to update my BIOS (now System BIOS version 6.0),
but with no success.
Any suggestion?
Thank you very much in advance,
Carlo

Dear Andrej,
thank you for this link.
It seems that my BIOS doesn't support the memory remapping feature,
or at least I can't find it anywhere in the BIOS setup (any help?).
At this point my question is if Toshiba will deliver in the near future
a BIOS able to setup memory remapping for Satellite A100 series,
or if it is possible to enable this feature using the BIOS of another series.
Frankly it seems to me quite odd that Toshiba sells a laptop
certified to support 4GB of RAM and 64bit mode instruction set
but at the same time it doesn't provide a BIOS able to actually exploit 4GB of RAM.
How can I setup memory remapping on my laptop?
Thank you to everybody,
Carlo

Set Memory of Geforce Go 7600 in Satellite A100-819

Similar Messages

Maybe you are looking for