Set message default format for certain recipients to SMS

We travel a lot and always switch off data roaming. Our children have iPhones and often send us messages. These always default to iMessages.
However it can often be days before we can connect to the internet and then we get a batch of messages. is it possible to set the default settings on the children's iPhonmes so that messages to mum and dad always go as SMS messages? We know they can resend the messages as text after they have gone as an iMessage but they tend to forget!!

That means i still have to change the name for each attribute?
Could it make it such that when the entity obejct is created, the name is already following as it is from the database? i.e some_column_name in the database will not become SomeColumnName in the entity object.

Similar Messages

Jdev - How to set the default format for Attribute Name

Hi, I am using Jdeveloper 10.1.2.0.0 (build 1811), is it possible to change the format of the attribute name generated such that it follows the name as created in the database?
For example, if in the database the column name is 'some_column_name' , when you create an entity object, the automatically generated attribute name will become 'SomeColumnName'. Is it possible to make it such that the generated attribute name follow the database column name i,.e 'some_column_name'

That means i still have to change the name for each attribute?
Could it make it such that when the entity obejct is created, the name is already following as it is from the database? i.e some_column_name in the database will not become SomeColumnName in the entity object.

Setting a default color for messages in Mail

I figured out how to change the default font & font size in messages in the Mail application, and how to change the color in my signature, however I cannot figure out how to set the default color for new messages?

Hi,
Look at the Mail's preferences, under Composing. Select where you like to save notes and todos.

Can I set the default locale for jvm

Hi,
Can I set the default locale for jvm?
How to do it?
Pan

My windows default locale is chinese .I have thought of your opinion. But in
windows nt , if I change the locale , all the environment will be
destroyed(just like reinstall it , it's difficult for me) . So , Is there
any other approach?
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Did you try to change the locale in the Windows control panel?
(Control panel -> Regional Options -> Your locale)
Pan YangBin <[email protected]> wrote:
I have tried changing this system property and other properties such
as -Duser.language=en -Dfile.encoding=Cp1252 , but all these properties
did
not changed, you can get this infomation from the log file .Maybe these
system properties are readonly.
Thanks very much.
Pan
Chris Halstead <[email protected]> wrote in message
news:[email protected]...
Try adding -Duser.region=US to the java command line used to start
WebLogic...
-chris
"Pan YangBin" <[email protected]> wrote in message
news:[email protected]...
Hi,
The problem exists in my project still exist.That is it.
When I did not set weblogic.jsp.encoding to GB2312 in my web
application(web.xml), and when the jsp file contain's chinese , the
output
will be error(error chinese) .And when I did not set it , the output
is
correct, but when I use request.getParameter("SomeFormElement")(theelement
inputed chinese), the return value is error(still chinese error).And
when
I
am in windows nt english version and do not set this property, all
these
two
problems dispear. And I try to compare the java files those were
generated
by weblogic from the jsp file , there is only two additional clause
in
the
java file. That's it:
((weblogic.servlet.jsp.JspWriterImpl)out).setEncoding("GB2312");
response.setHeader("Content-Type", "text/html; charset=GB2312");
(the web.xml has <context-param>
<param-name>weblogic.jsp.encoding</param-name>
<param-value>GB2312</param-value>
</context-param> to be set
So, I think maybe it works well if I change the default locale toenglish.
And unfortunately, your method is also failed.(I have to use weblogic
in
chinese environment)
Would you please help me to solve this problem?
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Try java ... -Duser.language=en ...
or mode con cp select=437 in the command prompt before running
weblogic.
Pan YangBin <[email protected]> wrote:
I'm using weblogic server 5.1 sp6 in chinese environment, and I
want
weblogic compile my jsp with en_us locale . So I can't use
Locale.setDefault(new Locale(...)) to set the default locale ,butI
really
want someway configure.
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Locale.setDefault(new Locale(...)) ?
Pan YangBin <[email protected]> wrote:
Hi,
Can I set the default locale for jvm?
How to do it?
PanDimitri
Dimitri
Dimitri

How to set the default values for print options

Hi all,
We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?

Hi Sandy,
This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
this will surely solve the issue.
Regards
Gunaseelan

OBIEE Presentation Services : Default formatting for numeric fields

Hello all.
I need help in setting default formatting for numeric fields in criteria. If a user adds an numeric field, it does not have any formatting associated with it. I want to know how do you set default formatting (for example if user adds sales measure it should appear in default format like $1,000 or even with decimal places).
Please help.
Thank you.

Hi,
1) We have so many subject areas. If we select "system wide default for this data type", is this change going to reflect in all subject areas.No should do this subject area wise.
2) Will this effect if we migrate from dev to prod environment.Yes it will effect.
I hope u will follow this to-
http://forums.oracle.com/forums/ann.jspa?annID=939 :)
Regards,
Srikanth

[Access 2010] Change default formats for data types

Whenever I import data, the default format for Boolean data types is "-1,0." I know how to subsequently change this format to "Yes/No," but I'd like to change the default
setting to "Yes/No." Is this possible?
Thanks in advance.

Hi,
I found you post the same question in other place and got the advice. I agree with Mr. Kees suggestion. The data type is a build-in default setting with Access, we can't change it. We may try the workaround via VBA to test.
http://forums.cnet.com/7723-6129_102-627633/access-2010-change-default-formats-for-data-types/#message5617496
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Have a good time.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

CMDLET commands regarding setting a default font for all users using OWA on an exchange 2010 platform

HI,
We are running Exchange 2010 and are migrating users from 2003 to 2010 with no problems. The client has asked me to set OWA font to LuidaSans which I can do for individuals with no problems. However, when I try and run the following command
Get-Mailbox -Resultsize Unlimited | Set-MailboxMessageConfiguration -LucidaSans but then got a message to state
"property composefontname can't be set on this object becuase it requires the object to have version 0.1 <8.0.535.0> or later. The object's currant version is 0.0 <6.5.6500.0>"
What object is this reffered to? Can anyone help please?
Thanks
Paul

Hi,
To set a default font for all users, you can use this command: -
Get-Mailbox | Set-MailboxMessageConfiguration -DefaultFontName "Trebuchet"
You can use any font style in place of “Trebuchet”.
I hope this information will be helpful for you.
Thanks and regards
Ashish@S
Ashish@V

Setting the default format when exporting to spreadsheet

Can I set the default format to be used when my end users export a report to a spreadsheet? I would like to set the default to Excel (in Office 2003 XML format).
Currently the end user has 7 choices for creating spreadsheets if the selecte the "All Available Formats" option when generating a spreadsheet. Those options are:
- Excel (in MHTML format)
- Excel (in MHTML format for 2000/97)
- Star Office 8
- Excel (in Office 2003 XML format)
- SAP internal XML format
- SAP Standard (internal table)
- Excel (in previous XXL format)
I ran the report SALV_BS_ADMIN_MAINTAIN and selected the following criteria:
1.) Action = create
2.) General Data = ALL
3.) ALV GUI / EXCEL VERSION = Excel (in Office 2003 XML format)
If I examine the table SALV_BS_ADMIN there is a new entry where:
OBJECT = GUI_ALV_XML_VER
M_USER = *
VALUE = 04
When I run a report and export to a spreadsheet I do not see any change in my selection criteria.
I read SAP note 1080608. This note tells you that by running the report SALV_BS_ADMIN_MAINTAIN you cannot set the default value. Is there a report I can run that will set the default value for alll the users on the system?

Hi
You execute the report SALV_BS_ADMIN_MAINTAIN and selected the following criteria:
1.) Action = change
2.) General Data = Detailed Selection
a) Client = SAP client no.
b) User All = User ID
3.) ALV GUI / EXCEL VERSION = Excel (in Office 2003 XML format)
Execute the report and Excel 2003 will be defaulted in export to excel.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

How do I set the default folder for file - open file... ?

When I save a file, photo, etc., the default folder for OPENING a file becomes the last folder I SAVED to - even after closing and reopening Firefox. Is there a way to maintain the same default folder for opening files?
Thanks.

Originally posted by: kwarner.uneedspeed.net
Well... I found over 200 bugs none of which seemed to talk about setting
the default folder. I probably missed the relevant bug in the spew.
I ask a question here as a last resort -- after I've done what I think
is an appropriate search for answers.
But thanks for your help in any case.
Daniel Megert wrote:
> DemonDuck wrote:
>
>> When I need to open a file not in the workspace, I use File -> Open File.
>>
>> But the default folder it opens is in C:\Documents and
>> Setting\Administrator
>>
>> I would like File -> Open File to first open in someplace more
>> reasonable -- like the workspace.
>>
>> How do I set the default folder for File -> Open File ????
>
>
> Is your '?' key broken? Check bugzilla there's a feature request
> regarding your question.
>
> Dani

How to set the Default values for Info Objects in Data Selection of InfoPac

Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CV

Hi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha

Set message default format for certain recipients to SMS

Similar Messages

Maybe you are looking for