Set MIDI Audio Configuration to default?

Hi! Please, can someone post here the default settings of his iMac 27 for the MIDI Audio Configuration utility? I've made many changes and there's no option to restore the default settings. I've also tried deleting the preferences file, but is useless. Thank you so much.

Please, can someone help me?

Similar Messages

  • Setting External Audio Interface as default output

    Hi.
    I have a MacBook Pro running Mountain Lion 1.8.5 with the following audio output options:
    Built-In Output
    MOTU UltraLite Audio Interface
    Bluetooth speaker.
    I have the UltraLite setup as my default  for "Use this device for sound output" and "Play alerts and sound effects through this device". And it works flawless. On occassion I have to play the audio to the Bluetooth speaker. And that works great too. However if I turn off the spearker the Mac defaults back to "Built-In Output". How can I set it to default back to the UltraLite instead? (Ps-I don't mind messing with files deep in the system).
    Thanks,
    David

    Hi.
    I assume you created WAD template.
    In this WAD you inserted 2 webitems:
    1. analysis item with dataprovider assigned to your query
    2. chart item with the same dataprovider
    If so you should set, as mentioned above, HIDDEN for analysis item (analysis item shows you query data - table) and VISIBLE fro chart item.
    So by default your report data will be hidden and chart visible.
    If you want to switch within WAD you should create any button "show/hide table" and attach command "SET_WEBITEM_PROPERTIES" and set visible for analysis item.
    Regards.

  • Hi i upgrade from lion to mountain lion to day on my mini mac,Since the upgrade i am getting no sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever

    Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
    I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.

    Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.

  • Setting Netflix audio/subtitles on AppleTV

    So the AppleTV 4.4.3 update finally added Netflix for Mexico and it works fine, except for one little problem: When I tried to watch a movie, the language was set to "Portuguese", when I usually have it set to "English" when I watch it on the web. How can I change the language and subtitles so they reflect on AppleTV?

    I am having issues setting the Audio Language in the Netflix App, for exaple in "the hunt fo the red octuber", through the website I can set up the audio language to English, Portuguese and Spanish, and the subtitles to Spanish and Portuguese, but in Apple TV 2 the Audio Language is always set to Portuguese, disregarding the Apple TV configuration which is Audio: English and Subtitles: Spanish. I also tried changing it to Default, but teh result was no different.
    If I press the settings button, the ATV gives me the option to change de subtitles, but not the audio.
    I am using netflix in Latin America.
    Any one has a sugestion????

  • This message recently popped up on my PC - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." What does this mean and how to fix ??

    Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC

    Hi B, thanks so much for helping me troubleshoot !!
    Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
    * Sound Playback Default Device = No Playback Devices.
    * Sound Recording Default Device = No Playback Devices.
    * MIDI Music Playback Default Device = No MIDI Playback Devices.
    All text in this drop-down box were light grey, and therefore unable to be selected or altered.
    I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
    Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
    Thanks again,
    Shell

  • "Audio configuration problem" on one machine, not the other

    I have a laptop and a desktop both with Vista Home Premium SP1. I have ITunes and Quicktime on both. I can run ITunes on the desktop without getting the "audio config problem" message, but on the laptop (Toshiba Satellite A215-S5837) I have tried the fix (uninstall and re-install QT) with no luck. At first I thought the problem was fixed, but after turning the machine off and back on, the problem is still there.
    Any help?
    Thank you,
    Dave

    Unfortunately, the noir household Vista box is in a different hemisphere from my current location (it's in North Carolina), and I can't doublecheck the way that the Audio control panels are set up on Vista.
    ... but in XP, the first thing I would check on with a recalcitrant "audio configuration" error would be if the correct default device was showing up in the "Sound playback" area of the "Audio" tab of the "Sounds and audio devices" control panel.
    Can you find such a location in your Vista control panel on the PC getting the "audio configuration" error?

  • Getting GB started - Midi Audio error

    I'm getting the -possible conflict, midi audio device- type error on starting GB. I've googled lots of ideas on fixing this but nothing has helped so far. I'm installing on a 933 G4 that has had Pro Tools HD installed, but is now thoroughly removed. And I've tried moving/removing anything else music/midi related but still to no avail, plus the usual repairing permissions etc.
    Are there any reliable answers to this kind of problem. Any ideas welcome. Very keen to try out GB!

    Posted: Friday, 3/21/2008 10:05pm GMT
    GB has detected a possible conflict between one or more third party midi or audio drivers-Possible solution:
    Hello fellow Applelonians:
    I see that a lot of you are having a problem opening Garageband. You may want to try these steps listed below.
    1.Click Finder > Applications> Utilities. Click the Utilities to open it.
    2.Go to the bottom of the directory and locate “Disk Utility” and double click it.
    3.If you have more than 1 hard drive on your system, select the primary one or the disk that Garageband is loaded on.
    4.Now click “Verify Disk Permissions”.
    5.Two messages should display and they are:
    - Verify permissions for Macintosh HD (or the name of your hard disk will display
    here...).
    - Permissions verification complete. The privileges have been verified or repaired
    on the selected volume.
    6.Now this part is complete and for now minimize the size.
    7.Go back to the Utilities directory (Step #1) and this time double click “Audio Midi Setup”.
    8.The “Audio Midi Setup window opens.
    9.Verify the following:
    - System Settings:
    Default Input is set as Built-in Audio
    Default Output is set as Built-in Audio
    System Output is set as Built-in Audio
    Properties For: Built-in Audio
    Clock Source: Internal Clock
    Now go to the “Audio Input” section:
    Format: 44100.0Hz 2ch-16 bit
    Move the Volume Slider to your personal preference.
    Now go to the “Audio Output” section:
    Source – this would be your own personal choice
    Format: 44100.0Hz 2ch-16 bit
    10. Now go to the top of the window and click the “Midi Devices” tab.
    11. Click “Audio” and a drop down option called “Open Aggregate Device Editor” should display.
    12.Open it.
    13.Check boxes should display. Select all of them and then close the window.
    14.Now open Garageband.
    Let me know if this worked for you. Now you should know that our setup is most likely more advanced then what you have, so your individual results may vary. Also, if this process doesn't work for you the first time and please don't panic! Go to the link below, download “Soundflower”, reboot and try the steps again.
    http://www.macosxhints.com/article.php?story=200504261547021
    Sincerely,
    Saxlerod
    http://www.myspace.com/SAxlerod
    member of DJ THUNDERMIXX

  • Setting different audio language?

    Hey all!
    I enjoy watching foreign movies and anime in their original languages, however I am having trouble doing so when renting them on Apple TV.
    I have tried setting Audio to both Default and Japanese for example, with English subtitles, however I continue getting full English-dubbed movies or anime TV episodes.
    Is there any workaround to this? Any advice would be greatly appreciated!

    Go into Audio/MIDI setup and create an "aggregate device" with your built in audio and the M-audio. In Logic select that aggregate device as your audio driver. That should do it for you.
    Stootka

  • "Out of memory" message when trying to copy audio configuration between songs

    Hello again,
    Any suggestion welcome about how to do paste an audio configuration successfully in 9.1.8. Here both the source and target songs are quite light stuff, 20 tracks, not much automation, never more than 3 inserts. The computer has 16 GB of Ram. Not sure if Logic X has the same problem but I can't afford to switch just yet. Please help if you can... Thanks !

    Mbelekete,
    Although I am in 64 bit mode,
    Are you sure? Go to Logic Pro's menu bar, About Logic Pro and check the pop up widnow for it to actually say 64bit mode as some people have reported unchecking the 32bit mode option in Get Info but Logic continued to boot up in 32bit mode usually because of a permissions issue with their Applications folder.
    Anyhow.. assuming you really running Logic Pro 9  in 64bit mode
    Logic only uses more memory when it needs to do so... such as when loading in large sample libraries... for example. so by default it will only use, say 3GB of Ram itself upon start...
    Safari caneasily  use more memory depending on for example,  how many tabs you have open.. what the websites you are viewing use.. such as HTML5, Java routines.. Flash etc.. and so on.... So its not so strange really.

  • To set the audio upto the end of the slide

    Hi all,
    Please let me know how I can extend the audio time upto the
    end of the slide time. For example a slide time will be 20 mts . I
    want to set the audio time upto that time . Now I am using the file
    loop ampient3. It can hear only 17 seconds. I am using captivate 3.
    With Regards
    Polachan

    Hi Polachan
    If this is for a single slide you will need to edit the audio
    clip and do some copy/paste magick to get the timing as desired.
    If the audio is for the entire project, you probably need to
    instruct it to loop. You do this using the Preferences dialog.
    Click Audio > Background Audio to configure the sound clip as
    background audio. You probably want to make it loop.
    Cheers... Rick

  • How to set a global configuration for Value Interaction

    Hi there
    i have this problematic situation about some of my dashboards, cause i need to set the same configuration for all of them in the part of the value interaction,
    some of there have in the "default situation" drill and others have "navigation"
    exist a config for this?
    regrats

    Hello Pavel,
    >> … and then on the login page I created a process …
    A typical APEX login page includes a process called Clear Page(s) Cache, with a sequence of 30. If the process you have create has a higher sequence (>30) it will see a null page values as they have been cleared already.
    Regards,
    Arie.
    ♦ Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
    ♦ Author of Oracle Application Express 3.2 – The Essentials and More

  • How to set a room part as default in a room template?

    Hi,
    Can you please tell me how to configure a room part as the default one for a room template. The requirement is that this room part must be the first one to be opened when a room of the specific template is opened inside collaborations. NW7.0 . Please provide you suggestions.
    Thankyou in advance..

    Hello Lorcan,
    Thank you for the information. But even after trying to set it as extension the changes was not getting reflected. Another way which I tried to set the room part as default after adding the extensions is below:
    Content Administration -> Portal Content -> com.sap.ip.Collaboration -> Template Worksets (where the customized templates are there)->In the selected template I tried setting the property "Default Entry for Folder" as yes for room part "Documents".
    As of now room part "Task" is opened as default for the room but I want "Documents" to be opened by default. Please advice on the same.
    Thank you in advance..

  • How I configure a default value in an entity object?

    Hi,
    1:how I configure a default value in an entity object?
    attribute type: DATE
    I want to set the current date
    ...thanks

    Override the create() action in your entity object implementation:
    protected void create(AttributeList attributeList)
    * This method should be subclassed to supply programmatic default values to
    * various attributes of a new Entity Object. For example, to create a sequence.
    * Instances of subclasses should call super.create() before performing any operations.
    System.out.println("create(AttributeList attributeList) - start");
    Date datSysdate = ( oracle.jbo.domain.Date) Date.getCurrentDate();
    super.create(attributeList);
    // set the default to today...
    setHiredate( datSysdate );
    System.out.println("create(AttributeList attributeList) - end");
    }

  • LMS 3.2 - LMS Portal -- How to set 'My Portal' View as Default-View?

    Hi all,
    LMS Portal comes up with three default views (My Portal, CiscoWorks Portal, LMS).
    As within My Portal it is possible to change layout and sorting, I would like to set this view as
    the default view comming up at login.
    How can this be configured?
    Actually LMS View comes up.
    Thanks for any feedback

    You have to add the portlet Ciscoworks Admin to your portal
    With this portlet you can set the default view
    Add portlet -> Ciscoworks -> Other -> Ciscoworks Admin
    Cheers,
    Michel

  • Now with audio configuration gone...

    How does one go about removing inserts, sends, and input and output settings for channels?
    Do I have to load every single possible channel setting on an object in the environment to make sure that my environment has no lurking plugins or IO setting?
    Am I missing something???

    I tried my testing again today, to make sure I wasn't dreaming yesterday.
    Jon, lets say you start with a Blank session. Add an audio track, instrument track, or create any of the various "audio objects" in the environment (bus, aux, in, out, audio track, inst track). Add an insert. Open your mixer and click "all".
    Now delete whatever you just created from the environment or the track. Note when testing with tracks you actually have to create a second track (not a duplicate) because you have to retain at least one track in the arrange window. When you delete it you should see it disappear from the "all" view in the mixer.
    Now create the same track and/or object again, and you will see that your insert is still there. It is retained, just like in logic 7. The only difference is in logic 7 you could go into audio configuration and clear out these retained inserts (AND IO settings) independent of if they were in your environment or not.

Maybe you are looking for