Set multiple Region Keys to one Region within Map component?

Does anyone know if multiple region keys can be tied to one specific region within a Map component?
Example -
My data contains the following values that i'd use as Region Keys (these are codes in my table that stand for cities within Taiwan):
     1) TW/FJN
     2) TW/KSH
     3) TW/TWN
On the China Map Component I can set a Region Key for Taiwan. But is there a way to be able to set all 3 of the above listed values for a Taiwan Region key? Or am I only allowed to enter 1 value?
Here is a photo to help show what i'm talking about:
[http://img195.imageshack.us/img195/8508/gdsagdsasd.jpg]

Similar Messages

How do I install multiple KMS keys on one server?

I currently am working at Phelps County Regional Medical Center in Rolla, MO and my question is: How do I install multiple KMS keys onto one server? This is very urgent and I have the KMS activating Windows 7 but, I also need all my Office keys, Windows
8, and Windows 8.1 to be activated via KMS. the current KMS is a Windows Server 2008 R2 server. Please help me out and thank you for your time! :)

you need to apply the following update (http://support.microsoft.com/kb/2885698)to your KMS server so you can license up to Windows 8.1. From there your key for 8.1/2012R2 will license everything
downwards and then you can also install your Office KMS key without issue. If its Office 2013 then you need to download the files here (http://www.microsoft.com/en-us/download/details.aspx?id=35584)
Be kind and Mark as Answer if I helped.

How to create Multiple Region In to One Region

hi
How to create Morw then one into one Region.
Thanks
Manoj
Edited by: Manoj Kaushik on Jan 4, 2010 6:08 AM

Hi,
this can be done in Apex 4.0 but in previous Releases i think it is not possible so far i know.
MDK.

How to align diff. search region items where one region is HideShow region

Hi,
I have split my 1 search region into 3 regions, because I want to use a hideShow region for a number of parameters. This is a manual search.
The structure is as follows:
PageLayoutRN
--SearchHdr
--Properties: Style: header
----SearchRN01
----Properties: Style: messageComponentLayout; Search Region: True
------items
----SearchRN02
----Properties: Style: labeledFieldLayout
------HSSearchRN
------Properties: Style: hideShow
--------items
----SearchRN03
----Properties: Style: messageComponentLayout; Search Region: True
------items
------buttons
The items of the hideShow region are indented compared to the items of searchRN01.
The Show/Hide switch is placed to the right of the items of regions 01.
How can I align the items of the 3 search regions to each other?
thanks
Ronny
Edited by: Ronny Eelen on 17-Jun-2012 23:50
Edited by: Ronny Eelen on 17-Jun-2012 23:59
Edited by: Ronny Eelen on 18-Jun-2012 00:00

Hi,
Issue resolved.
I added another regions between the hideShow regions and the item, of type messageComponentLayout and that aligned everything as it should be.
thanks anyway
Ronny

Multiple midi channels in one region

Hello,
I've been using Logic since version 4.7, but haven't tried the following in a version newer than 5.5.1. Not sure what functionality might have changed, so here goes...
I'm having issues with having notes with different midi channel assignments in a single region. I have 3 audio instrumets on midi channel one, two, and three, respectively. I have a midi instrument whose midi channel is set to all, that is patched to all three audio instruments in the environment. The track containing my region is playing back on the midi instrument, not the individual audio instruments. I have assigned channels 1, 2, and 3 to individual notes in the region, yet when it plays, all 3 audio instruments are triggered for every note rather than only the instrument whose midi channel matches the note's channel.
Thanks in advance,
JG

Thanks for the responses! The issue is that the three audio instrument objects in the environment are not respecting it's assigned midi channel. Yes, the channel splitter will split the incoming midi channel, but I shouldn't have to use the splitter if I set the midi channel on instrument 1's parameters pane to channel 1, and if the the midi channel is set to channel 2 on audio instrument 2 ect. So in the above example, no matter how how many different events I send on different midi channels to audio instrument 1, audio instrument 1 should only respond to midi channel 1. However it responds to all midi channels. Again, the channel IS NOT SET TO ALL.
So here's a simple test:
-Instantiate Logic's EFM1 on audio instrument 1
-Set audio instrument 1's midi channel in the parameters pane to midi channel 4
-Create a blank midi region with the pencil tool on audio instruments 1's track in the arrange window
-Open up the blank region in the matrix editor
-With the pencil tool, create a few notes.
-Then open up the same region in the event list editor and make sure that all the notes are on a midi channel other that channel 4.
-Play back the region and EFM1 will play back not respecting it's channel assignment!
Hope this clears some stuff up.

Email multiple email addresses for one contact within Group email

I have a contact card within a Group that has 2 email addresses. When sending out mass emails I want to send it out to both of the addresses for that one contact card; however, when I put the persons name in the address bar in mail, it only defaults to one of them. How can I fix this without creating multiple contact cards for the same person? Thanks for your help!!!

Hi, I'm not positive, but I don't think you can.
I'd maybe keep a little text snippet of the 2 email addies to copy/paste in the TO: feild, or the BCC: feild is better.

I need to have multiple foreign keys on one column, can Designer do this?..

Basically I've a table that needs to link to three other tables. As far as I can tell Designer will only let me have the foreign keys on seperate columns;
Column_1 - FK1
Column_2 - FK2
Column_3 - FK3
I think it's a much better database design is to have all three link to one column and have a Type column denoting which table to references
Column_1 - FK1, FK2, FK3
Column_2 - Type (FK1, FK2, FK3)

Can you tell us more about the problem you're trying to solve?
Thanks, George

2 Region Conditions on one region

I want my region called Territory Information only to appear on my form if:
P10_INTL_DOM = D (return value)
and
P10_MAIN = Y (return value)
How do I write this when it looks like the conditional section allows only for 1 condition at a time? I am so new at Apex, so please be detailed. Thanks!

I got it! I chose PL/SQL Expression and entered the following in Expression 1.
:P10_INTL_DOM = 'D' AND :P10_MAIN = 'Y'

Multiple forms in one region???

Hello guys,
I have created application with couple of pages, but now I have one critical issue with one page.
In this page I have created multiple forms in one region by customize templated, that is working very much fine, but I unable to insert/update data into the DB table through this page.
My sinceraio is something like that, I have couple of tables, where p_id is common in all of the tables, now this issue page I have created multiple(2) forms in one region where both the forms are built but two separated DB tables in one both of them has one column in common ie p_id, the value of p_id is processed from the previous page.
I am aware of the apex limitation about one table for region and hence I created View from this two different tables and above that created INSTEAD OF trigger for insert and update purpose as through I can't, so.
got the help from this below forum:-
Report & form on Multiple table
But still I am unable to get any sucess.... if somebody can help me out...????
I have created same example on apex workspace... let me know if you need any credentials than...???
Thanks
regards,
Kumar

Hi again,
I'm getting error as :-
ORA-20508: Unable to perform insert operation. -22816 ORA-22816: unsupported feature with RETURNING clause
Error Unable to process row of table RENAL_BIOPSY_SYMPTOMS.
OK
I have created view on 2 tables as :-
CREATE OR REPLACE FORCE VIEW "RENAL_BIOPSY_SYMPTOMS" ("P_ID", "RENAL_BIOPSY_CONDUCTED_YN", "DT_CONDUCTED", "CONFIRMED_BY", "REPORTED_ON_BY", "INSTITUTION", "RESULT_TYPE", "COMMENTS", "HEMATURAI_YN", "HEMATURAI_DT", "MICROHEMATURIA_YN", "MICROHEMATURIA_DT", "PROTEINURIA_YN", "PROTEINURIA_DT", "HYPERTENSION_YN", "HYPERTENSION_DT") AS
SELECT
RB.P_ID,
RB.RENAL_BIOPSY_CONDUCTED_YN,
RB.DT_CONDUCTED,
RB.CONFIRMED_BY,
RB.REPORTED_ON_BY,
RB.INSTITUTION,
RB.RESULT_TYPE,
RB.COMMENTS,
SY.HEMATURAI_YN,
SY.HEMATURAI_DT,
SY.MICROHEMATURIA_YN,
SY.MICROHEMATURIA_DT,
SY.PROTEINURIA_YN,
SY.PROTEINURIA_DT,
SY.HYPERTENSION_YN,
SY.HYPERTENSION_DT
FROM
RENAL_BIOPSY RB
INNER JOIN
SYMPTOMS SY
ON
RB.P_ID=SY.P_ID
and created INSTEAD OF trigger on the above view as:-
CREATE OR REPLACE TRIGGER "RENAL_BIOPSY_SYMPTOMS_TRIGGER"
INSTEAD OF INSERT ON "RENAL_BIOPSY_SYMPTOMS"
FOR EACH ROW
BEGIN
DECLARE
PAT_ID NUMBER;
BEGIN
INSERT INTO RENAL_BIOPSY (RENAL_BIOPSY_CONDUCTED_YN, DT_CONDUCTED, CONFIRMED_BY, REPORTED_ON_BY, INSTITUTION, RESULT_TYPE, COMMENTS)
VALUES (:NEW.RENAL_BIOPSY_CONDUCTED_YN, :NEW.DT_CONDUCTED, :NEW.CONFIRMED_BY, :NEW.REPORTED_ON_BY, :NEW.INSTITUTION, :NEW.RESULT_TYPE, :NEW.COMMENTS)
RETURNING P_ID INTO PAT_ID;
INSERT INTO SYMPTOMS (P_ID, HEMATURAI_YN, HEMATURAI_DT, MICROHEMATURIA_YN, MICROHEMATURIA_DT, PROTEINURIA_YN, PROTEINURIA_DT, HYPERTENSION_YN, HYPERTENSION_DT)
VALUES (PAT_ID, :NEW.HEMATURAI_YN, :NEW.HEMATURAI_DT, :NEW.MICROHEMATURIA_YN, :NEW.MICROHEMATURIA_DT, :NEW.PROTEINURIA_YN, :NEW.PROTEINURIA_DT, :NEW.HYPERTENSION_YN, :NEW.HYPERTENSION_DT);
END;
END;
ALTER TRIGGER "RENAL_BIOPSY_SYMPTOMS_TRIGGER" ENABLE
My apex workspace is :-
ws :- newapex
us :- [email protected]
ps :- kg
and application as "BeforeDemo_Application" with page as 6(the ISSUE page).
Any help guys..... appreciated..!!!!
Regards,
Kumar

Multiple reports in one region

Hi
Ive got 2 views that i want to display in one region, as i have to pass in a value into a page item froma column link, is this possible or is there such a thing as a glbal item that can be incorporated into multiple regions.
Marco

Hi Marco,
You can have as many reports in a region as you like. When you create a report just put it in the same region position - using the sequence numbering to put them in the order you want them to appear.
However, I think what you really mean is that you want to specify one value for the page that can be used for both reports?
If so, all you need to do is have a hidden page item at the TOP of the page and set this value with your column link. ALL your reports can then use this value as a filter.
It is also possible to use Application Items - these are created through Shared Components and can be set/used anywhere
Andy

Region formatting - multiple tables inside one region?

Hey there. first of all, I wondered if anyone had a good reference for formatting regions. I am having some difficulty finding good material.
What I am trying to do is create 3 tables inside a region, each with different backgrounds, displayed side by side. like this:
| | |
I'm completely at a loss as of how to get the next table to come back up to the top. I am using template 16, which puts a border around regions and makes them minimize-able, so I want it to be all or nothing. any help in this formatting dilemma would be awesome.
Message was edited by:
in3d

I need to do something similar but I wasn't sure what you meant by:
and wrap each of the report tables within DIV tags.I have one region based on one sql query. I just need to display fields I specified on the one sql query to appear in 3 different columns in the region.
Could anybody give some more details on this?
Thanks!

Multiple Reports In One Region - Question For Denes Kubicek

Denes,
I looked at what you've done on your demo app 31517, Page 152
(http://htmldb.oracle.com/pls/otn/f?p=31517:152), in which you place several reports in the same region. It is nicely done and a great example of something I
need to do at my work place.
I have two questions.
1) In your explanation link (takes me to your blog) you say you made changes to a copy of the Report Template and placed this copy into a copy of the Standard Page Template. However, I see that your reports are set to "No Template".
I've probably missed something here, but don't know what.
2) A more general question ... I'm intrigued in how you get tab item in, say, your Section 4 Tab Set (or any of the other Tab Sets) to "Stand Out" in bold letters
when clicked on. How are you doing this?
Thanks very much for your help. Yours is one of the great sites to learn from.
Elie

Apex v4. has parent and child regions (subregions) where child regions display inside the parent. If you make the child regions with no template, they will probably appear as if it's just two reports in one region.
Problem is, they display one above the other, not side by side. But there's been a recent thread on working around this just in the past few days on this forum.

HT1311 I have tried this method but it seems that every time the region is set back to the original one as if I didn't change anything

I have tried this method but it seems that every time the region is set back to the original one as if I didn't change anything

Try it this way and see if it works. If you do not have a credit card registered to a legal address in the country in which you want to purchase, you will not be able to buy from that store anyway.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Sign out
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Settings>iTunes and App Stores>Apple ID
Sign into your ID
Tap your Apple ID after signing in
Tap View Apple ID
Enter your password
Go to Country/Region to change the store.

Multiple Reports In A Single Region

Hi,
I've created a page with 4 regions with items in it that are grouped logically.
I need to create a 5th region which should have multiple SQL reports in it.
How can I acheive that ?
| ---------------------------------------------------------------------
| Region#5
|---------------------------------------------------------------------
SQLRep#1
row1
row2
SQLRep#2
row1
row2
SQLRep#3
row1
row2
[BUTTON with some action]
- end of region
I'm guessing this calls for custom reports / regions. How can I do that ?
Thanks.

Ygore,
See this example on how to position regions:
http://htmldb.oracle.com/pls/otn/f?p=31517:107
You may need to adjust (create new) page template. However, you will not be able
to put two or more reports in one region.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How do I display more than one region as a modal popup?

Hello all!
I have a popup that displays a report region. I now want it to display more than one region, say a report region and another report region underneath it.
Here's the code that I currently have (and this one can popup one region):
$.fx.speeds._default = 1000;
$( function(){
$('#ModalForm').dialog(
     modal: true,
     autoOpen: false,
     width: 650,
     height: 450,
     buttons:{ Calculate: function(){calculateTotal();},
                     Close: function(){closeForm();}
function openForm(pFoodTemplateId, pMealTypeId)
var getone = new htmldb_Get('shiny',&APP_ID.,"APPLICATION_PROCESS=DUMMY", &APP_PAGE_ID.); // initialize get
getone.add('P24_TEMPLATEID', pFoodTemplateId);
getone.add('P24_MEALID', pMealTypeId);
gReturn = getone.get();
getone = null;
$('#ModalForm').dialog('open');
function closeForm()
{$('#ModalForm').dialog('close');}
$(document).ready(function()
    {$('a.temppop').click(function() {openForm();});
});The class of the button (or in my case, the link in another region that's not displayed as a popup) is temppop.
QUESTION:_
How do I edit my existing code, so that it can now display another region?
The ID of the region it displays now is ModalPopup. I would like to add another region, with another ID off course. Pick any ID, as long as you can explain to me how.

Magali wrote:
Hello all!
I have a popup that displays a report region. I now want it to display more than one region, say a report region and another report region underneath it.
Here's the code that I currently have (and this one can popup one region):
$.fx.speeds._default = 1000;
$( function(){
$('#ModalForm').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
function openForm(pFoodTemplateId, pMealTypeId)
var getone = new htmldb_Get('shiny',&APP_ID.,"APPLICATION_PROCESS=DUMMY", &APP_PAGE_ID.); // initialize get
getone.add('P24_TEMPLATEID', pFoodTemplateId);
getone.add('P24_MEALID', pMealTypeId);
gReturn = getone.get();
getone = null;
$('#ModalForm').dialog('open');
function closeForm()
{$('#ModalForm').dialog('close');}
$(document).ready(function()
{$('a.temppop').click(function() {openForm();});
});The class of the button (or in my case, the link in another region that's not displayed as a popup) is temppop.
QUESTION:_
How do I edit my existing code, so that it can now display another region?
The ID of the region it displays now is ModalPopup. I would like to add another region, with another ID off course. Pick any ID, as long as you can explain to me how.First build your dialog for new ID (please replace NEWREGIONID with your region static id)
$( function(){
$('#NEWREGIONID').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
And now you could open or close the dialog
$('#NEWREGIONID').dialog('open');

Set multiple Region Keys to one Region within Map component?

Similar Messages

Maybe you are looking for