Set New Code for Network ???

I seem to have forgot my Wireless file sharing password and was hoping someone knows how to reset it or what happens when you reach ten attempts because I know I can eventually remember it but not sure with four more chances, tries, etc. 
The help pages on the Playbook only provide details on how to use it or about it but not recovery.

A security wipe of the BlackBerry PlayBook tablet will erase all data and any downloaded applications and media (Including pictures/video taken on the BlackBerry PlayBook tablet or transferred via a PC)
Afterwards, you will basically have a 'like new' PlayBook.
If you have a backup of your PlayBook, you can restore previous personal data, pictures etc.
Otherwise, you will again set the Playbook up as new, enter your same BlackBerryID and password, etc., and proceed.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • What is the factory setting pin code for my ipod touch?

    im looking to make a purchase in app on my ipod touch and i need to switch off the restrictions under general settings. in order to this i need the pin code which is 4 digits. this must be factory set as ive not set it previously.
    thanks

    A: what is the factory setting pin code for my ipod touch?

    There is no default setting. You have to set the passcodes. If you cannot remember them, then see:
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
    Verify that you are using the latest version of iTunes before attempting to update.
    Connect your device to your computer.
    Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
    Select the Summary tab.
    Select the Restore option.
    When prompted to back up your settings before restoring, select the Back Up option (see in the image below). If you have just backed up the device, it is not necessary to create another.
    Select the Restore option when iTunes prompts you (as long as you've backed up, you should not have to worry about restoring your iOS device).
    When the restore process has completed, the device restarts and displays the Apple logo while starting up:
    After... [Show more]

    Read other 6 answers

  • Setting color codes for more than one photo at a time

    Is there any way to set color codes for more than one photo at a time?

    Hi John,
    I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
    As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
    For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
    To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
    I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
    My workflow is
    1. I first separate all images by event. I do that at the time of import.
    2. I do a fast pass rejecting all the obviously bad images
    3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
    4. I then select the images to be used by color code.
    5. Next I process the final images (crop develop etc) by collection.
    6. Last I output the set according to client requirement.
    If you have a better workflow, I am all ears.
    By the way, what is your photo specialty and where are you located?
    Jim

  • HT5622 hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

    hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

    The iPhone has a feature called "Activation Lock" described here:
    http://support.apple.com/kb/PH13695
    Without that Apple ID, you will not be able to use that iPhone.

  • Set new value for VO attribut

    I have function in package on database which is param is String and return value is also String(VARCHAR2).
    That function calculate some field on db and return a result.That is OK
    I made VO in my AM.
    "SELECT package_name.func_name("string") from dual" and that is OK also.
    When I start that module I recive valid result from database based on string which I passed to function.
    And that works fine.
    Question :
    How can I change value or how can I set new value for the package_name.func_name(variable) in VO
    during runtime in my application ? ^^^^^^^^
    JDeveloper 9.0.3.988

    I have function in package on database which is param is String and return value is also String(VARCHAR2).
    That function calculate some field on db and return a result.That is OK
    I made VO in my AM.
    "SELECT package_name.func_name("string") from dual" and that is OK also.
    When I start that module I recive valid result from database based on string which I passed to function.
    And that works fine.
    Question :
    How can I change value or how can I set new value for the package_name.func_name(variable) in VO
    during runtime in my application ? ^^^^^^^^
    JDeveloper 9.0.3.988 1. When using stored procedures it would be better to use it in following way:
    Connection conn = //get it some how
    CallableStatement cs = conn.prepareCall("{call myPackage.do_something(?)}");
    cs.registerOutParameter(1, java.sql.Types.VARCHAR);
    cs.execute();
    2. You could parameterize it like this:
    CallableStatement cs = conn.prepareCall("{call " + packageName "." + funcName + "(?)}");
    cs.registerOutParameter(1, java.sql.Types.VARCHAR);
    cs.setString(1,"someString");
    cs.execute();
    String result = cs.getString(1);
    where packageName and funcName are defined elsewhere
    --hery

  • Set new smartforms for Plant

    Hi All,
    I have new plant, When  I create new smartform, but a don know how to assigned new form to that plant ?
    Please help me do it !

    I have function in package on database which is param is String and return value is also String(VARCHAR2).
    That function calculate some field on db and return a result.That is OK
    I made VO in my AM.
    "SELECT package_name.func_name("string") from dual" and that is OK also.
    When I start that module I recive valid result from database based on string which I passed to function.
    And that works fine.
    Question :
    How can I change value or how can I set new value for the package_name.func_name(variable) in VO
    during runtime in my application ? ^^^^^^^^
    JDeveloper 9.0.3.988 1. When using stored procedures it would be better to use it in following way:
    Connection conn = //get it some how
    CallableStatement cs = conn.prepareCall("{call myPackage.do_something(?)}");
    cs.registerOutParameter(1, java.sql.Types.VARCHAR);
    cs.execute();
    2. You could parameterize it like this:
    CallableStatement cs = conn.prepareCall("{call " + packageName "." + funcName + "(?)}");
    cs.registerOutParameter(1, java.sql.Types.VARCHAR);
    cs.setString(1,"someString");
    cs.execute();
    String result = cs.getString(1);
    where packageName and funcName are defined elsewhere
    --hery

  • Locked Access Code for Network Preferences - treo650

    I've been using a used treo650 for about a year.  I finally decided to try the web usuage and had sprint activate it.  But it appears that the previous owner of my phone put a access code on the network preferences area I need to finish setting the phone up.  After working with Sprint tech support it looked like the only solution was to do a hard reset on the phone and have the sprint store configure the phone and web info - then I would hotsync to recover my data  - good plan - first part worked - sprint was able to configure the phone and it worked!  - But when I hotsync'd it to recover personal data the network preferences were overridden and I'm back to a lock network preference and no web access.
    Looking for a way of defeating the access code and still being able to hotsync -------   I have a few ideas put they are pretty drastic.
    Any Ideas?
    Post relates to: Treo 650 (Sprint)

    When you sync, you get a lot of little settings files along with the big databases containing your contacts and calendar. I don't know which files are responsible for network settings, but if you have time, you could rummage around in your profile folder. Not sure where yours is, but mine was under c:\Program Files\palmOne\username when I originally installed, and when I installed the downloadable version of Palm Desktop, it was created under c:\Program Files\Palm\username.
    == Edit ==
    A backup would be advisable.
    Message Edited by Jeffro on 12-03-2009 12:04 AM

  • How to set new role for new custom entity only

    I created a new custom entity, I want to create new role for it only.  So I created new role and set custom entity User role. But When I login the user with created role, it show now right to access CRM.
    Awen

    Are you trying to grant access so that users can use this custom entity but no other data at all?
    You will still have to include access to all sorts of bits of CRM just to make the user interface work - especially the things on the Business Management and Customization tabs of your security role. You also need to check these 6 settings:
    Special privileges in CRM Security Roles
    If this is the only security role you plan to give to your users, I would suggest you start from a standard role and remove access to other entities, rather than start from blank and work upwards.
    Hope this helps.
    Adam Vero, Microsoft Certified Trainer | Microsoft Community Contributor 2011
    UK CRM Guru Blog

  • IOS7 set access code for IPad4 after update.

    Why do I suddenly have an access code for my IPad4 after the ios7 update? I didn´t have an access code before, and I haven´t set one either. My wife says she hasen´t used the ipad since yesterday.  I can access the ipad through Itunes on my Macbook, but I can´t reset the ipad because I need to turn off the "icloud search" in the ipad settings (which I can´t access because I don´t know the access code).
    Can anyone help?
    Thanks,
    Rob

    Hey robertdbuckley,
    Thanks for the question. I understand you are experiencing issues with passcode lock. The following articles may help:
    iOS: Understanding passcodes
    http://support.apple.com/kb/HT4113
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Thanks,
    Matt M.

  • Continually have to Set Region Code for DVD Help?

    LG GSA-H50L.
    This drive, so I've discovered, is not supported (Disk Utility says Burn Support: Unsupported).
    Every time I put in a DVD, it says that the region code of the drive and the disk don't match (Drive is Region 1, disk is region 2). I lets me change the Region code, but next time I put in a DVD...same thing all over again.
    Oddly, it always states "You can change the Region code 5 more times"
    Any ideas?

    If your LG doesn't work, give the Pioneer a try. Before I bought it, I researched many other's experience with it, and it seems that the 115D is the winner. Just thought I'd help with additional options for you. In my humble opinion, I don't think it's wise to spend so much time fussing with a $30-$50 DVD drive vs. getting a new one and getting the Mac back on track for work/fun.

  • New Code for all phones

    Hi .....
    this is a code works whith all the Nokia Mobile Phones
    *#92702689#
    in some phones a call duration message will appear
    in other phones a full information about the device will apear.
    Good Bye

    Not exactly new. The, so called, life timer code has been in many phone models for several years.

  • New Code for Mountain Lion upgrade is wrong

    New IMac Code sent by Apple to get Mountain Lion upgrade (free) did not work/not recognized on App Store page. What should I do?

    I saw the contact info from another search on this Forum to ask Apple for help via e-mail. They responded pretty quickly (within 30 min).
    I did not realize there was one password that was sent only to be used to open/reveal a second password (in a pdf in the first e-mail) that u actually use on th eApp store for the upgrade. Kind of confusing but I see what I did wrong now.
    It did work and is now downloading.
    So, (hopefully) problem solved.
    Nice Forum!
    MarkyZL

  • I redeemed my code but there was an error. I need a new code for Macos x Developer download of 10.8

    i need new Mountain Lion Codes.

    Log back to your developer page https://developer.apple.com/devcenter/mac/index.action# and click the 'Get Redemption Code' button. This will sort you out. If not, post to the dev forums instead.
    Pi

  • I need help getting a new code for the yosemite beta because mine says it's already been used

    I signed up for the yosemite beta and when I clicked the code to download the beta, nothing happened. I backed out and did it again and then it said the code was already in use. I have tried refreshing the page with the code in safari but the same one keeps coming back. I also signed out of the app store and logged back in to see if it was in my purchases and it doesn't show up. I need a little help here getting the beta.

    There's a lot of results in Google when you search for this but unfortunately refreshing the page doesn't seem to generate a different code anymore. Mine also says already redeemed

  • Set new margins for preformatted spreadsheet

    How do I set margins on a spreadsheet that came from a PC Excel to Numbers> It is preformatted for a statistics class.  I also need to set up 2 sided printing.  I also usually get a screen to do 2 sided from my printer, however that for some reason is not an option.
    When I see it to work on it the page is perfect however when I look at preview document one column goes off the page.  I try to make the columns smaller, but that makes the formulas not work properly.  Help!

    Hi robin,
    You really haven't supplied a lot more information about what is not working. I have no idea what you mean by "I lose some calculation forms."
    Going from memory, spiral binding requires a margin of about 1/2 inch; coil binding requires about 3/8 inch.
    Jerry has already answered the question regarding duplex (two sided) printing.
    Regarding shrinking the table to fit a page: Numbers has a nifty feature in Print View—at the bottom of the window (in Print View only) there's a slider to use to Scale Contents. It makes no change to the content of the table except to increase or reduce the size of everything on the page. Set your margins, then go to the View menu and Show Print View. Move the slider to the left until the whole table appears on a ingle page.
    Regards,
    Barry

Maybe you are looking for