Set No Decimal Point for Quantity in Any Stock Movement.

Hi experts,
Can anybody tell me how to block user from entering qty with decimal point in any stock movement that they plan to do. Our current system setting allowed user to do goods issue with decimal quantity such as 1.25 Unit.
Regards.

Hi Sujiana,
If you dont want to decimals i think one option is availble is it correct or i dont know.why dont you try onece for this
Go to logistics general ->Quantity optimizing and allowed logistics units of mesure->unit of measure rounding rule
do here round to your unit
i think it may be helpful to you
Prem

Similar Messages

How to increase Decimal Points for the BOM Component Quantity

Hi All,
While creating BOM:
Can anyone help me to know how i can increase the Decimal points for the BOM components quantity.
I can able to give only upto 3 decimal points, but the requirement is more than that.
I have increased the Decimal point value to 5 in transaction Code CUNI. but still it is allowing me to enter only upto three decimal places.
Thanks and Regards
Khadeer

Khadeer,
You would be better off changing the base quantity of the parent part. Instead of "1 EA parent contains .00003MG of component" you could say "100 EA parents contain .003MG of component".
Alternately, you could use different units of measure for your parent or component parts, which would be more suitable for the 3 place decimal limitation.
I agree with Anil in that if you elect to change the decimals from standard, you could end up with huge changes that will propagate through every module in the ERP. In my view, there is no need of this kind of headache.
Best Regards,
DB49

Upto 4 decimal point for unit of measure

hi,
We have requirement to maintain upto 4 decimal point in PO and sales order quantity for unit of measure M3. Example PO quanity 0.3902 m3, sales order quantity 2.3212 m3, SAP allow upto 3 decimal point, how to handle this 4 decimal point for unit of measure and any impact to do so ?
best rgds,

Dear Eric,
To change decimal places of Materials follow this:
IMG - SAP NetWeaver - General Settings - Check Units of Measurement
select Units of Measurement & select required Unit of Measure & set decimal places.
Hope this helps...
Give points if useful...
Thanks,
Jignesh Mehta

Decimal points in quantity more than 3 digits

Hi
I know that decimal point in quantity cannot be longer than 3 digitis - it's structure of field/ table but we have this requirement from pharma company and it's a kind of general requirement of pharma, life science, etc so I wonder how do we handle this technically beside change from Kg to gram. My collegue said her x-collegue said cannot it with modify table or add field to table which not clear to me.
Anyone has experience on this, pls share
Thanks & Regards,
Chanchana

Hi,
Qty will be measured bu UOM which will be defined at CUNI.There you may change the decimal places for the unit.Please check.
Other wise create a unit Gram and provide the conversion KG = 1000gm.
Regards,

Decimal points for Item Cost

Hi,
When i call out the query from OITM which has the average price (item cost), the result showed me in 2 decimal points. But in my item master data, it shows 3 decimal points. How can call out a query that shows 3 decimal points? Is there any condition i should use?
Thanks,
Rgds,
Harith

Hello Harith, I will test this issue on pl36 to see if it's reproducible. anyway, you are always suggested to patch up with the latest patch. I will let you know the result.
Just tested and I got the same result as my previously reply, it shows 3 decimals witch complies with both general settings> decimal places for price and item cost in Item master data.
please try to recall the Avgprice from OITW table to see what you get there.
Thank you.
Wilma Wang
SAP Business One Forums Team

How to set a change pointer for a perticular table?

Hi,
Please let me know how to set a change pointer for a perticular table.

what do you mean by 'change pointer'? normally this idiom is used for sending ÍDOCs from one system/client/org-unit to another ...
do you generally want to record changes to a specific table? then set parameter rec/client using RZ10 for your instance profiles and restart the instances in order for the parameter to take effect.
set the table to 'record all changes' using SE11.
you might re-consider if the table has a lot of data and is accessed very often for performance-resons.
change protocols can be evaluated using tx, SCU3.

CP7 - Show 4 (or more) decimal points for User Variable?

Is there a way to show 4 or more decimal points for user variables?
For some reason, I'm only showing two decimal points for user variables in Captivate 7.
Micky

Yeah, I was afraid of that.
Right now, I have am dividing the values of two separate text box entry fields. I have to calculate the values to determine if they are getting a promotion, lateral transfer or lower pay range.
I'll figure out a workaround or just use java.

Decimal Points for Unit of Measurement

Hi all
For doing service entry in the QTY field can we put the value upto six decimal for any unit.
in customisation for Unit of measurement can we configure this thing putting decimal places - six or is there any other setting is required
Please help
Thanks in advance
Rajesh

Hi,
Yes in customisation for Unit of measurement you can customize it,
but it will be valid whenver you use this UOM in the system.
There is one thing also you can do
The Quantity fields decimal points in service entry is by default 3 digits ,
so to use 1,123456 quantity for lets say price 10 $
you can multiply both sides with 1000
i mean
use 1123,456 for 10000 $
just an idea
Regards
Hope it helps

HOW to remove the decimal points for particaular field

hi friends,
Iam printing the quntity in decimal mode like 2.000.
but i want to print this as only 2.
How can i remove the the decimal in smart form..
Iam printing amount as 1234.00000.
But i have to print two zeros after decimal point..how can i remove zeros .
appricioate for u r answers..
regards,
sampath kumar

You may use the option
field(.0) for printing the quantity
field(.2) for printing the amount..
Go through SAP help given below..
<b>Number of Decimal Places
A program symbol of one of the data types DEC, QUAN, and FLTP can contain decimal place data. Use the option below to override the Dictionary definition for the number of decimal places for the formatting of this symbol value.
Syntax
&symbol(.N)&
The EKPO-MENGE field contains the value 1234.56. The Dictionary definition specifies 3 decimal places and an output length of 17.
&EKPO-MENGE& -> 1,234.560
&EKPO-MENGE(.1) -> 1,234.6
&EKPO-MENGE&(.4) -> 1,234.5600
&EKPO-MENGE&(.0) -> 1,235</b>

Using Decimal Points with Quantity in 11i

We are in apps 11.0.3 and going to migrate into 11i.
While making Returns to Vendor we cannot use decimal points in the place of quantity and we have to complete the transaction same as transaction completed in the PO receipt.
For ex: If I have case as following what is the solution in 11i?
PO Receipt for Item AAA quantity 100 Metric Ton
And due to some cases I have to return it 49.5m Metric Ton
In apps 11.0.3 I can make Returns with integer quantity only, but how I can manage this case in 11i?
null

In IP 5.0 Patchset I you can receive and return with decimal quantities.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Altaf Hussain K. ([email protected]):
We are in apps 11.0.3 and going to migrate into 11i.
While making Returns to Vendor we cannot use decimal points in the place of quantity and we have to complete the transaction same as transaction completed in the PO receipt.
For ex: If I have case as following what is the solution in 11i?
PO Receipt for Item AAA quantity 100 Metric Ton
And due to some cases I have to return it 49.5m Metric Ton
In apps 11.0.3 I can make Returns with integer quantity only, but how I can manage this case in 11i?<HR></BLOCKQUOTE>
null

Dynamic displaying of decimal points for currency field in ALV

Hi,
        In ALV output there is a currency field and displaying data of different countries. It should display decimal point according to the country's currency. But at a time it can display data of different countries.

Hi Dilip,
I think your question is about currencies with different number of digits after decimal point. If you have the currency field in the ALV row, you have to give it's name as currency reference for the value field in the field catalog.
After creating the field catalog, call a form and do something like this (change fielnames accordingly).
<pre>
*&      Form alv_fieldcat_enhance
      Individual Enrichment of field catalog
FORM alv_fieldcat_enhance
CHANGING pt_alv_fieldcat TYPE slis_t_fieldcat_alv.
FIELD-SYMBOLS:
    <alv_fieldcat> TYPE slis_fieldcat_alv.
LOOP AT pt_alv_fieldcat ASSIGNING <alv_fieldcat>.
    IF <alv_fieldcat>-fieldname(5) = 'KBETR' OR
       <alv_fieldcat>-fieldname(5) = 'SKBTR' OR
       <alv_fieldcat>-fieldname(5) = 'DMBTR'.
Company code currency
      <alv_fieldcat>-cfieldname = 'BWAER'.
Document Currency for conditions, net value and taxes
    ELSEIF <alv_fieldcat>-fieldname(5) = 'KWERT' OR
            <alv_fieldcat>-fieldname    = 'NETWR' OR
            <alv_fieldcat>-fieldname    = 'NPAX_MWST_AMNT'.
Document Currency
      <alv_fieldcat>-cfieldname = 'WAERK'.
    ENDIF." <alv_fieldcat>-fieldname(5) = 'KBETR' or
ENDLOOP." at pt_alv_fieldcat assigning <fieldcat_alv>.
ENDFORM.                    " alv_fieldcat_enhance
</pre>
Regards,
Clemens

Decimal point for Price value in ALV Report

HI,
I have created ALV report,
I have 2 price fields in ALV report
For first field i have to display in the below format.
If the value of the field is 3601152 then I have to display it as 36011.52
For second field I have to display in the below format
if the value is 2494 then I have to display it as 2495.00
else if the value is 3498.73,then I need not to do anything.
that means If there is no decimal point, then I have to keep decimal point.
Thanks&Regards
RamaDevi

HI,
you can work with search and concatenate.
value1 = 3601152
search value1 for '.' .
if sy-subrc eq 0.
concatenate value1(5) '.' value1(2)+5 into text.
Or value1 = value1 / 100.
endif.
Regards
Nicole

2 Decimal Points for Indonesian Rupiah Currency

Dear All,
I would like to assign 2 decimal points to Indonesian Rupiah Curreny - IDR by accessing OY04.
However, there is no input value for 2 decimal points.
For accounting purpose, we would like to record business transactions up to 2 decimal points.
Kindly advise.
Appreciate it!

Hi wishy washy,
even I had various real painfull experiences with clients who changed the decimals..... Still having nightmares about this....
Please be hypercarefull with that what you are doing. Has IDR really 2 decimals? As far as I can see IDR has in Standard (In my SAP-testsystem) no decimals.
What happens if you change the decimals? Please note, SAP stores values always without decimals.
Example: 100,00 Euros are stored as 10000 in bseg-wrbtr.
Euro has 2 decimals.
If you change the decimals to 0 the amount changes to 10000 Euros.
Example: 100 IDR are stored as 100 in bseg wrbtr.
IDR has no decimals
If you change the decimals to 2 the amount changes to 1,00 IDR.
Please consider: automatic taxcalculation, Data carriers, reporting, open item clearing, budgeting, depreciation, and hundreds of other issues.
The several warnings of OY04 have a reason... and I don't want you to have my nightmares.
Best regards
Horst

Do NOT display decimal points for 1 currency

Dear Friends,
i have a report which shows the revenue of all countries. we have a target currency (variable) in the report.if we give that target currency as EUR, it changes al currencies into EUR. similarly if we give USD, the report will change all currencies to USD with decimal points
But the requirement here is, for all other countries, the decimal points shud get displayed for the revenue, but only for Korea curreny (WON) the decimal points shud not be dispayed.
in the table TCURC, for Korea it is maintained as " whole numbers only ".
is there a way to achieve this??
Rgds.,
ASha

Hi Yogesh,
Thank you for ur reply.
in the report, i have 10 keyfigures. 4 are being picked up from the report and they have currency translation variable. The rest 6 are formulas. On these formulae, i restricted the decimal display to "nothing defined". it works fine for all the 6 formulae. for WON it does NOT show decimals and for the rest of the currencies, it shows decimals.
but how this can be achieved on the 4 direct keyfigures??
Rgds.,
ASha

Is it possible to set IN/OUT points for video effects within a single clip in PE4?

Hello,
In PE4, Is it possible to use keyframes to simply turn certain video effects on/off at different points within a single clip ?
Some effects (i.e. Invert)have a Blend With Original setting which makes this easy to achieve, but others (i.e. Ripple)do not.
I understand how to use keyframes to adjust effect properties at different points within a clip, I just can't find a way to simply 'turn-off' or bypass an effect for a period of time.
Thanks All, CB

Chris,
As Steve points out, most Effects are OFF, by default (usually setting their parameters to 0). I just add a Keyframe for that Effect, with those properties, where you want the Effect to be OFF (but check that each Effect that you use starts as OFF, just to be sure). Then, in between the OFF settings, I add Keyframes with the desired parameters to invoke that particular Effect.
One can also use the Razor/Sissors to cut the Clip into segments (just do not move them) to keep the Keyframes in one area of the original Clip. I usually work on the entire Clip, as once the Keyframe is set to OFF for that Effect, no more Keyframes are needed.
Some Effects also have a Bypass setting, that can be Keyframed (in P Pro, and assume in PE). This can be handy to fully turn OFF any Effect. Note: even in P Pro, not all Effects have a Bypass setting.
As usual with PE (and P-Pro and PS), there can be a couple of ways to accomplish the same thing. One can choose the method that suits them best.
Good luck,
Hunt

Set No Decimal Point for Quantity in Any Stock Movement.

Similar Messages

Maybe you are looking for