Set of default values for Select-Options

Hi Gurus,
I have a requirement where I need to set default values for select options
ex: SELECT-OPTIONS: S_MTART FOR MARA-MTART
default values must be ERSA - HIBE- FHMI - DIEN - GEST
Please tell me how to do it.
Effective replies will be rewarded with full points
Karthik

Hi,
For each SELECT-OPTION, you can only specify one DEFAULT.
You must specify the default value g in its internal format, e.g. "SELECT-OPTIONS DATE FOR SY-DATUM DEFAULT '19931224'", not "... DEFAULT '24.12.1993'".
The default value g should normally be a literal because, at runtime when you use SUBMIT, it is transferred to the selection options table sel so early that no value can be assigned to the field g. System fields like SY-DATUM are an exception here because the system usually assigns values to them as soon as the report processing starts.
When you use user-defined selection screens in your programs that you do not call using SUBMIT, the DEFAULT value is transfered when the selection screen is first called. In this case, therefore, you can use other fields g.
regards,
sowjanya
Message was edited by: sowjanya suggula

Similar Messages

  • How to set the default values for print options

    Hi all,
    We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?

    Hi Sandy,
    This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
    if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
    this will surely solve the issue.
    Regards
    Gunaseelan

  • Default Values for Select-options In Webdynpro-ABAP

    Hi Freinds,
    Kindly,Help me in setting the Default values for the Select-options in Webdynpro ABAP.
    Here the Node and the Attributes are Created Dynamically, and then Displayed Select-options Component View.
    Regards,
    Xavier.P

    Xavier Reddy Penta sent me this question via email and I answered it directly yesterday. Here is the solution that I provided to him, so that it is stored with the original question:
    I believe your problem is that you are not setting the value into the range correctly.  You are setting it directly into the field symbol of the range like such:
    <FS> = L_STRING2.
    But ranges are deep objects. They have four fields: Sign, Option, High, and Low. This is from the online help:
    1.     sign of type c and length 1. The content of sign determines for every row whether the result of the condition formulated in the column is included or excluded in the entire resulting set for all rows. Evaluable values are "I" for include and "E" for exclude.
    2.     option of type c and length 2. option contains the selection option for the condition of the row in form of logical operators. Analyzable operators are "EQ", "NE", "GE", "GT", "LE", "LT", "CP" and "NP" if column high is initial, and "BT", "NB" if column high is not initial. With the options "CP" and "NP", the data type of the columns low and high must be of the data type c, and special rules apply for entries on the selection screen.
    3.     low of the data type defined after FOR. This column is designated for the comparison value or the lower interval limitation.
    4.     high of the data type defined after FOR. This column is designated for the upper interval limitation.
    So when you are moving the value into the field symbol you are setting it into the sign column.
    Here is an example of how you can access the components of the range:
    * create a range table that consists of this new data element
        lt_range_table =
          wd_this->lv_sel_handler->create_range_table(
               i_typename = l_typename ).
        IF l_fieldname = 'CARRID'.
          FIELD-SYMBOLS: <tab>         TYPE INDEX TABLE,
                             <struct>      TYPE ANY,
                             <wa>          TYPE ANY,
                             <option>      TYPE char2,
                             <sign>        TYPE char1,
                             <high>        TYPE ANY,
                             <low>         TYPE ANY,
                             <wa_values>   TYPE ANY.
          ASSIGN lt_range_table->* TO <tab>.
          APPEND INITIAL LINE TO <tab> ASSIGNING <wa>.
          ASSIGN COMPONENT 'OPTION' OF STRUCTURE <wa> TO <option>.
          ASSIGN COMPONENT 'HIGH' OF STRUCTURE <wa> TO <high>.
          ASSIGN COMPONENT 'LOW' OF STRUCTURE <wa> TO <low>.
          ASSIGN COMPONENT 'SIGN' OF STRUCTURE <wa> TO <sign>.
          <sign> = 'I'.
          <option> =  'EQ'.
          <low> = 'AA'.
        ENDIF.

  • How to assign list of default value for select-option variable???

    Hi every one
    This is Deepak,
    I want to know how to assign list of default value to select-option variable ? please any body tel me solution
    for example
    select-option matnr for mara-matnr default ..............and here i want to give more than 1 values that will be default value and use can choose any one at the time of input .
    Thank you in advance
    Deepak

    Hi.
    Check the following sample code.
    REPORT ztn_test.
    " It is example for list populating.
    TABLES:knvp.
    data: BEGIN OF itab OCCURS 10,
          kunnr like knvp-kunnr,
          END OF itab.
    data: wa_itab like itab.
    TYPE-POOLS: vrm.
    DATA: name TYPE vrm_id,
    list TYPE vrm_values,
    value LIKE LINE OF list.
    PARAMETERS: s_kunnr(20) type c  as LISTBOX VISIBLE LENGTH 40 .
    AT SELECTION-SCREEN OUTPUT.
    SELECT kunnr from knvp  into  CORRESPONDING FIELDS OF TABLE itab WHERE parvw = 'SP'. " SP for ur requirement
    " I have used loop to populate some values from table
    loop at itab into wa_itab.
      name = 'S_KUNNR'.
      value-key = sy-tabix.
      value-text = wa_itab-kunnr.
      append value to list.
      clear wa_itab.
    endloop.
    " If u want individaully assign the values change the code as
    name = 'S_KUNNR'." Select option name
      value-key = 1." Index
      value-text = 'VAL1'.
      append value to list.
    name = 'S_KUNNR'." Select option name
      value-key = 2." Index
      value-text = 'VAL2'.
      append value to list.
    CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING id = name
    values = list.
    Edited by: tahir naqqash on Feb 21, 2009 4:38 PM

  • Default  value for select options.

    Hi folks
    I have to default four values in select-options.
    eg.,
    S_lfart for likp-lfart, default zse, zin, znd, zps.
    Thanks in Advance,
    Rao

    Hi,
    Go through the following syntax:
    SELECT-OPTIONS <sel> FOR <f>
                   [DEFAULT <g> [to <h>] [OPTION <op>] SIGN <s>]
                   [MEMORY ID <pid>]
                   [LOWER CASE]
                   [OBLIGATORY]
                   [NO-DISPLAY]
                   [MODIF ID <key>]
                   [NO-EXTENSION]
                   [NO INTERVALS]
                   [NO DATABASE SELECTION].
    Declares a selection table <sel> for the field <f>. For <sel>, places input fields on the corresponding selection screen. The additions allow you to set a default value, accept input in lowercase, define a required field, suppress or modify the display on the selection screen, restrict the selection table to a line or a selection to a single field, or prevent input from being passed to a logical database
    Regards,
    Bhaskar

  • Specific default values for select-options high and low

    Hi
    My requirement is in the selection screen i have a select-options field for which i need to give default values as mentioned below.
    Description                              Data Type       Default Value     Mandatory?             Sel Scrn Type     
    Delivery/BOL Date        ekab-bedat                         1st DOM to current day     Y              Range     
    The datatype is ekab-bedat.
    In the low value field ,it should be 1st Date of month(DOM) and in the high value field it should be current day.
    Give me the code for the same asap.

    >
    sreedeep.sreekumar wrote:
    > Dont mistake my intensions. When i tried to write it in the form of a request it showed me that it cannot me posted beacuse the words that i am using (please,kindly) is not following the terms and conditions of the words to be written in the threads
    Sounds quite vague to me.
    >
    sreedeep.sreekumar wrote:
    > I was asking help for this as i am a novice in SAP-ABAP and i couldnt find solutions for it and also i have seen people directly writing codes for the queries.
    Becuase you see people posting pieces of code doesn't mean you can ask for a solution asap. Besides, whether you're new or a veteran in ABAP, what you need can be solved with some very basic knowlegde of ABAP. Just use a bit of common sense.

  • Default values for Select options

    Hi All,
      I want to have default values X0 and ND for a select-options field.how can i get the same?
    Thanks,
    Rakesh.

    Initialization.
    s_akont-low = 'X0'.
    s_akont-sign = 'I'.
    s_akont-option = 'EQ'.
    APPEND s_akont.
    s_akont-low = 'ND'.
    APPEND s_akont.

  • How to set default value in select option for ABAP query

    Hi experts,
    What is the way to set up default values for select-options in ABAP query.
    e.g.
    I have one field 'Year' in my ABAP query selection screen.
    I want value of current year to be appeared here whenever user execute report
    Thanks in Advance
    -Harkamal

    Hi Harkamal,
    execute your Query via SQ01. On Selection-Screen
    goto save Variant. Mark your field
    as selection variable an press Button election variable.
    Take variable from TVARV and use it.
    Than save the Variant.
    Look at TVARV if the 'Year' is updated to the actualYear!
    regards, Dieter

  • Default value for selection screen field

    Hi all,
      I am using LDB PNPCE. I want to give default value for field Personnel area on selection screen.
    How can I do it?
    Thanks
    Rahul

    Hi Rahul,
    In the INITIALIZATION event we can set the default values for selection screen fields.
    INITIALIZATION.
    loop at screen.
    if screen-name = 'S_MATNR-LOW'.
    CLEAR S_MATNR.
    s_matnr-low = '1234'.
    s_matnr-option = 'EQ'.
    s_matnr-sign = 'I'.
    append s_matnr.
    CLEAR S_MATNR.
    s_matnr-high = '5678'.
    s_matnr-option = 'EQ'.
    s_matnr-sign = 'I'.
    append s_matnr
    clear s_matnr.
    endif.
    endloop.
    Hope it helps.
    Mark if useful
    Regards,
    Saumya

  • How to set the Default values for Info Objects in Data Selection of InfoPac

    Hi All,
    Flat file Extracion:
    How to set the Default values for Info Objects in Data Selection Tab  for Info Package
    ex: Fiscal Year Variant  Info Object having values 'K4' 'Y2' etc  in Flat file
    Initially  default value(not constant)  for this info Object value should be 'K4'  in Info Package
    If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
    Rgds,
    CV

    Hi,
    suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
    haritha

  • Setting a default value for DropDownByIndex UI

    I have a drop down by index UI element which gets its values from a table.  i need to set the default value to 'Select a State' or something like that.  How do i do it? 
    Thanks,
    Lathika

    Hi Lathika,
    Please follow these links:
    To set default value as blank  in drop down by index
    and
    Re: Value of RFC in Dropdownbykey
    Also, try this solution:
    that means you have to set at design time,
    to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
    like
    wdContext.currentContext<nodeName>Element.set<FieldName>(<default value>)
    This generally done in Initialization method of the controller
    Thanks,
    Raj.
    Message was edited by: Raj

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • How to set a default value in Select one choice.

    Hi
    I'm using ADF BC, in that how to set a default value in select one choice.
    pls. help on this.
    regards

    set the default value on the underlying EO or VO attribute
    john

  • How to set a default value for particular field in SRM PO Portal

    Dear Gurus,
    Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
    My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
    I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
    Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
    Thanks in advance...
    Regards,
    Sathish

    Dear Laurent,
    Thanks for your response,
    But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
    My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
    Kinly guide me how to get the particular node of field in the Purchase order screen.
    Thanks you in advance,
    Sorry for the inconvenience if any
    Regards,
    sathish

  • Set a default value for a radio button populated with a List of value

    Hi,
    I am using jdeveloper 11.1.1.3.0. I need to set a default value for a radio button populated with a List of value(Yes/No). Here's the selectonechoice code.
    <af:selectOneRadio value="#{bindings.Code.inputValue}"
    label="#{bindings.Code.label}"
    required="#{bindings.Code.hints.mandatory}"
    shortDesc="#{bindings.Code.hints.tooltip}"
    id="sor1" autoSubmit="true"
    valuePassThru="true" layout="horizontal">
    <f:selectItems value="#{bindings.Code.items}" id="si1"/>
    </af:selectOneRadio>
    I want to have the selectonechoice set to No by default. In the previous versions, I set the default value in the base attribute VO. But it is not working in the new version.
    Thanks

    Hi,
    this should work in JDeveloper 11.1.1.3 the same as in 11.1.1.2. If it doesn't then it is better to file a bug than to work around it
    Frank

Maybe you are looking for