Set only one field color in a POWL-List

Hi,
in the method "IF_POWL_FEEDER~GET_FIELD_CATALOG" the whole colume (see attachment) can be colored.
CASE <ls_dfies>-fieldname.
       WHEN 'LANGU'.
         ls_fieldcat-colpos         = 1.
         ls_fieldcat-display_type = 'BT'.
         ls_fieldcat-color = 19.
         ls_fieldcat-WIDTH = '800'.
         ls_fieldcat-text_ref      = 'LANGU'.
       WHEN 'CHANGED_ICON'.
         ls_fieldcat-icon_src_ref = <ls_dfies>-fieldname.
         ls_fieldcat-display_type = 'IM'.   "Icon
         ls_fieldcat-tooltip       = text-006.
         ls_fieldcat-color         = '4'.
But how can I colorize only one field in the POWL.
Regards
Jim

Hi Jim.
Would you be so kind and post your solution to this question?
BR
Per

Similar Messages

How to set only one Index-group for a Search-iView as default?

Hi Everybody,
i have a lot of index ID's for searching in different folders. Is it possible to set only one index-group as default for a search iView? Until now i get all groups as default in every search. It's inconvenient for the users to use the link of 'show options' in order to uncheck the other index ID's.
regards,
Seed
Edited by: seed_mopo on Jun 6, 2008 5:02 PM

hi Seed,
To achieve this you have to follow the below steps
1. Create a new set of search options, choose System Administration -> System Configuration -> Knowledge Management -> Content Management -> User Interface -> Search -> Search Options Set in the portal.
In that you have a field 'Index Groups', wherein you can specify which index group, the user has to search in. If there are multiple index groups, mention your index groups separated by comma.
See here for more information
http://help.sap.com/saphelp_nw04/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/content.htm
2. You have to specify the option set that you created in step 1 in the default KM search iview. In the iview properties, under the field search option set, mention the option set that was created for this index group or multiple index groups.
This way, you can configure KM search iview to search in a single index group or multiple index groups.
Revert back in case of any queries
Regards,
Ganesh N

How to get Safari to suggest passwords when only one field is present?

Safari works great when there are two fields to enter a password - a password field followed by a "confirm password" field - but doesn't seem to work when there is only one field to enter a new password. Any suggestions?

Hi,
we have done something like this using seltab.
One inputfield, user can enter anything same like in google like
name:ab*,dob:1972
write a conversion method to parse this input to seltab like
    clear ls_seltab.
    ls_seltab-sign = 'I'.
    if lv_value cs '*'.
      li_lng = sy-fdpos.
      ls_seltab-option = 'BT'.
    else.
      ls_seltab-option = 'EQ'.
      ls_seltab-low    = lv_value.
    endif.
use your seltab to retrieve data from the table.
In anyway.. you can search resources in this direction to build your solution.

LSMW to update only one field in materials

Hello experts,
My requirement is to update only one field 'HRKFT-Origin Group as Subdivision of Cost Element' in material using LSMW. I tried with Standard Batch/Direct Input -> Object - 0020, Method - 0000. But it was not successful as it gave me warning - 'The material cannot be maintained since no maintainable data transferred' at the end.
Now I want to try this using BAPI method in LSMW. But it is showing me error - No target structures could be determined..
Please guide me.
Regards,
Aparna Gaikwad

Hi
i tried the same and am able to do it using LSMW Batch i/p. Object - 0020, Method - 0000.
There in source fields define material, plant and origin grp. in structure relations map the below
BGR00 Batch Input Structure for Session Data                       <<<< MBEW1 Material COsting
      Select Target Structure BGR00 .
    BMM00 Material Master: Transaction Data for Batch Input            <<<< MBEW1 Material COsting
          Select Target Structure BMM00 .
        BMMH1 Material Master: Transfer of Main Data                       <<<< MBEW1 Material COsting
Next in field mapping map those 3 fields: material, plant and origin grp.
while testing do one thing. first take the data and try the same using MM02 manually. if tht is working fine ( i mean if the material is having costing view and you are able to chnage the origin group). then test with the same material, plant and a different origin grp. It will work.

I have an Ipod, and when I plug in my head set only one side play's; unless I play with it. Please Help

Help please I have a Ipod touch, and when I plug in the head set only one side is playing

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Problem with creating an dynamic internal table with only one field.

Hi,
i create an internal table like this:
FIELD-SYMBOLS: <GT_ITAB>      TYPE TABLE,
               <GS_ITAB>,
               <FS>.
DATA: GT_DATA TYPE REF TO DATA.
DATA: GS_DATA TYPE REF TO DATA.
DATA: TABNAME   LIKE DD03L-TABNAME.
DATA: FIELDNAME LIKE DD03L-FIELDNAME.
DATA: TBFDNAM   TYPE TBFDNAM VALUE 'LFA1-NAME1'.
SPLIT TBFDNAM AT '-' INTO TABNAME FIELDNAME.
CREATE DATA GT_DATA TYPE TABLE OF (TABNAME).
ASSIGN GT_DATA->* TO <GT_ITAB>.
CREATE DATA GS_DATA LIKE LINE OF <GT_ITAB>.
ASSIGN GS_DATA->* TO <GS_ITAB>.
SELECT * FROM (TABNAME) INTO CORRESPONDING FIELDS OF TABLE <GT_ITAB>.
BREAK-POINT.
it works OK.
Now i want to create an internal table not like LFA1 but with LFA1-NAME1 Field TBFDNAM.
It's not only LFA1-NAME1 it shell be the value of TBFDNAM.
When i change
CREATE DATA GT_DATA TYPE TABLE OF (TABNAME).
to
CREATE DATA GT_DATA TYPE TABLE OF ( TBFDNAM).
i get an shortdump.
Any idea?
Regards, Dieter

Hi Dieter,
Your approach is ok, but it will create dynamic table without a structure of NAME1. Only the line type will be suitable (but field name will not exists -> hence the error in the select statement).
In this case you need to create a dynamic table which structure consists of one field named NAME1.
This code is the appropriate one:
" your definitions
DATA: tabname LIKE dd03l-tabname.
DATA: fieldname LIKE dd03l-fieldname.
DATA: tbfdnam TYPE tbfdnam VALUE 'LFA1-NAME1'.
FIELD-SYMBOLS <gt_itab> TYPE table.
"new ones
DATA: it_fcat TYPE lvc_t_fcat WITH HEADER LINE.
DATA: gt_itab TYPE REF TO data.
" get table and fieldname
SPLIT tbfdnam AT '-' INTO tabname fieldname.
" create dynamic table with structure NAME1 (only one field)
it_fcat-fieldname = fieldname.
it_fcat-tabname = tabname.
APPEND it_fcat.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog           = it_fcat[]
IMPORTING
    ep_table                  = gt_itab
EXCEPTIONS
    generate_subpool_dir_full = 1
    OTHERS                    = 2.
CHECK sy-subrc = 0.
" dereference table
ASSIGN gt_itab->* TO <gt_itab>.
" insert data only to NAME1 field
SELECT * FROM (tabname) INTO CORRESPONDING FIELDS OF TABLE <gt_itab>.
I checked, this works fine:)
Regards
Marcin

How to get only custom fields from a SharePoint 2010 list?

I am working with the Client Side Object Model. In a console application I am retrieving all fields from a custom list. The problem is the Clientcontext fetches me a bunch of internal fields I do not want to be included. Also this causes some of the fields
to appear more than once.
string siteURL = "http:XYZ";
ClientContext context = new ClientContext(siteURL);
Web oWebSite = context.Web;
context.Load(oWebSite);
context.ExecuteQuery();
//Get the list by title
List produktKatalogListe = spLists.GetByTitle("Produktkatalog");
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml = "<View/>";
ListItemCollection listItems = produktKatalogListe.GetItems(camlQuery);
context.Load(produktKatalogListe);
context.Load(listItems);
context.Load(produktKatalogListe.Fields);
context.ExecuteQuery();
foreach(Field field in produktKatalogListe.Fields)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Is there a way to print only custom fields? This would mean omitting fields like
internalID, GUID...
I tried the following:
if(!field.Hidden)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Unfortunately this not only does not solve the issue but is also not a very good solution for the case I do want to display custom but hidden fields.
Algorithmen und Datenstrukturen in C#:
TechNet Wiki

The following approach seems to solve the issue. Instead for checking if the field is not
Hidden I checked whether it is not FromBaseType.
if(!field.FromBaseType)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Algorithmen und Datenstrukturen in C#:
TechNet Wiki

How to diable only one field enabled and other fields disabled for one user group?

Hi,
I have a form contains many fields. A group of users can add items using that form.
As per the user requirement I have created a filtered view and that filtered view can be seen by some other sharepoint user group but as per their further requirement the new sharepoint user group is only allowed to update Remarks field. All other fields
should be disabled for them.
In my idea, I have to create multiple forms and in one of it except Remarks field all should be disabled but I am unable to assign multiple forms to a single list.
Or how to make Remarks field enable to this user group and for other admin user group all fields could be enabled.
Hope I have expressed my question correctly.
Any solution would be appreciated.

There is no Out of the Box way to set permissions on each column, primarily due to the performance impact. The following thread provides some options,
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c0794232-9bab-4cea-91d8-f311a793a863/how-to-set-column-wise-permission-in-sharepint-list-in-sharepoint-2010?forum=sharepointadminprevious
Dimitri Ayrapetov (MCSE: SharePoint)

Search with multiple values in only one field

Hello there,
I have this query to get the results when the user make a search query:
select * from (
select
"ID",
"ID" ID_DISPLAY,
"SHIFT_DATE",
"SHIFT",
"OFFENSE_ID",
"DESCRIPTION",
"ANALYST",
"STATUS",
"SUBSTATUS"
from "#OWNER#"."IDSIEM_OFFENSES")
where
OFFENSE_ID IN(:P223_OFFENSES) AND
instr(upper("DESCRIPTION"),upper(nvl(:P223_DESCRIPTION,"DESCRIPTION"))) > 0
AND
instr(upper("SHIFT"),upper(nvl(:P223_SHIFT,"SHIFT"))) > 0
AND
instr(upper("SUBSTATUS"),upper(nvl(:P223_SUBSTATUS,"SUBSTATUS"))) > 0
AND
instr(upper("ANALYST"),upper(nvl(:P223_ANALYST,"ANALYST"))) > 0
AND
instr(upper("SHIFT_DATE"),upper(nvl(:P223_SHIFTDATE,"SHIFT_DATE"))) > 0
AND
instr(upper("STATUS"),upper(nvl(:P223_STATUS,"STATUS"))) > 0
ORDER BY OFFENSE_ID DESC
The thing that I want to do is to put multiple values on the field P223_OFFENSES when I search. For example an offense is a number, so I would like to put in the search field 1111, 3333, 4444, 5555 and the report shows me those 4 offenses in the report. The search operation works only when I put only 1 offenses, but when I put more than 1 separated by comma, it shows me this error: report error:ORA-01722: invalid number. That's why because is a number and the comma character is not allowed, how can I achieve this? Thank you in advance.
Regards, Bernardo

Try this one please
select *
from (select "ID",
               "ID" ID_DISPLAY,
               "SHIFT_DATE",
               "SHIFT",
               "OFFENSE_ID",
               "DESCRIPTION",
               "ANALYST",
               "STATUS",
               "SUBSTATUS"
          from "#OWNER#"."IDSIEM_OFFENSES")
where (instr(upper("DESCRIPTION"),
              upper(nvl(:P223_DESCRIPTION, "DESCRIPTION"))) > 0)
   AND (instr(upper("SHIFT"), upper(nvl(:P223_SHIFT, "SHIFT"))) > 0)
   AND (instr(upper("SUBSTATUS"), upper(nvl(:P223_SUBSTATUS, "SUBSTATUS"))) > 0)
   AND (instr(upper("ANALYST"), upper(nvl(:P223_ANALYST, "ANALYST"))) > 0)
   AND (instr(upper("SHIFT_DATE"),
              upper(nvl(:P223_SHIFTDATE, "SHIFT_DATE"))) > 0)
   AND (instr(upper("STATUS"), upper(nvl(:P223_STATUS, "STATUS"))) > 0)
   AND regexp_like(offense_id,'^('||
                   regexp_replace(regexp_replace(:P233_OFFENSES,'[[:space:]]'),
                                  '|')||')$','i')
What I am trying to achieve is this
*** I expect your user to put in the values separated by commas like 27823, 27815, 27834 ****
1. from the input the user gives back via :P233_OFFENSES, remove SPACES.
2. Replace all "," with "|"
3. do a regexp_like search by boxing in the input values with a "^" and "$" so that it does not select values like 278157 which contains the value you searched for viz. 27815
You can better understand this if you try this query out
with q1 as
( select 1 as id, 27823 as offense_id from dual
union
select 2 as id, 27815 as offense_id from dual
union
select 3 as id ,27834 as offense_id from dual
union
select 11 as id, 227823 as offense_id from dual
union
select 12 as id, 278157 as offense_id from dual
union
select 13 as id , 278347 as offense_id from dual
union
select 21 as id, 278233 as offense_id from dual
union
select 22 as id, 278156 as offense_id from dual
union
select 23 as id ,627834 as offense_id from dual ),
q2 as (
select regexp_replace(regexp_replace('27823, 27815, 27834','[[:space:]]'), ',','|') as P233_OFFENSES from dual )
select * from q1 q, q2 g
   where regexp_like(q.offense_id , '^('||P233_OFFENSES||')$','i') ;
This should return only the first 3 rows

Is ist possible to show only one accentuation color in preview?

Dear All,
I often work with preview to read scientific text using preview. I often do accentuations in different colors to carve out argumentation, facts etc. But the accentuations of all colors are shown on the left bar (and all my additional notes. It would be very helpfull for me only to the one of the five colors available to create are clear view of arguments, facts, pro vs. contra etc.
Is there any function available?
Best regards
Torsten

SUBSTR(column1, INSTR(column1,'.',1,2)+1 )The INSTR finds the position of the second occurrence of a '.'
The SUBSTR then takes from that position + 1 and the rest of the string.

Having only one field checkable

hello all
I am using the form wizard to place fields in a PDF(s) - we have these PDFs for our users to fill out a "checklist" of their qualifications. The idea is that they have a subject like: Arterial Monitoring... and to the right are 4 fields ( Arterial Monitoring 1, Arterial Monitoring 2.. etc ) where they rate their experience ( Novice.. to Expert ). I want them to only be able to place 1 check mark and not multiple check marks. I cant seem to find anything to make this happen.
Using Acrobat Pro 9
Thanks
Rob

For what you describe, radio buttons would meet the need to indicate level of qualification. As far as I know, there is no simple way to change text boxes to radio buttons. You also need to set the information in the radio button that will be sent. Even if there was a way, the information you would have to edit would not make it any faster. There are some differences depending on the use of Acrobat vs. Designer. I suspect you are using Designer and may want to ask future questions in the LiveCycle forum to get better answers.

Change width of only one field

Hi,
i have just started with Adobe FormsCentral and I have a problem
As you see on the picture I have some fileds on the left and some fileds on the right.
If I change the witdh of the right fileds only the filed changed wich was selected.
But if I change the left field all fileds of the left side are changing. Is like there grouped or something.
How can I just change e.x. the field "zip" without changing Stree, County, Contact Name, Phone, Email

Field labels for fields in the left column all share the same label width. This is something that cannot be turned off. When the labels are set to Left/Right aligned this results in the behavior your are seeing. If, alternatively, you set the lables to Labels Top then the lable width will equal the field width minus some padding.
I hope this helps.
Jeff Canepa
Software Quality Engineer
Adobe Systems, Inc.
[email protected]

ONLY ONE FIELD DOES NOT GET PREPOPULATED FROM THE DATABASE

I would really, really appreciate if someone can comment or suggest something that would help with the resolution to the issue I am currently experiencing.
Simple sample form that explains the issue can be accessed from the link below.
How to test the form:
Open the form.
Click on the yellow button to add new Task.
The problem is with Additional Product fields ( in blue). You can add as many of them as you want by clicking on the Red button with the +. Add some data and uploade in database. When you download it from the database, data will come back fine for all of them, except for the first one.
Any ideas or help would be greatly appreciated.
https://acrobat.com/#d=2vFWOlm56FmrC4owzpfHew
The code is behind the Red button with the +. Very simple. Perhaps is the indexing issue with the database. I do not know enough about it, to be able to send any suggestion to the DB guy.
According to the DB guy, data uploades without issue. It is the blank field when the form with data is downoloaded.

It might be related to http://forum.java.sun.com/thread.jspa?threadID=583466&messageID=2988344

Audio coming from only one field

Hello,
I just did a mic'ed interview with my little camera. I was wearing headphones and noticed audio coming from only the left side, but there was nothing I could do about it that I was aware of.
Anyway, now that this thing is in Final Cut Express, is there anything I can do to apply the left track to the right track? Or would this make it sound funky or how does it work?
Thanks very much,
Jeremy

Ah, I see. I just used 'Pan' and set it from -1 to 0. Cool.
This can be deleted or left for reference, I don't care.

How to print same layout twice changing only one field dynamically

I have a report which prints three pages invoice in Dollar currency, I want that same report to print those three pages again but the currency will be changed dynamically based on certain criteria. It means I three pages for Dollar and next three pages for other currency.
Or if you can help me printing the same report twice(do not want # of copies to be set to 2).
Please it's urgent.
Thanks
Kailash.

Hi
Distribution.
and the pass different currency in distribution.
Regards
chaluve

Set only one field color in a POWL-List

Similar Messages

Maybe you are looking for