"Set Page Boxes" XOffset/YOffset - Page Disappears??

I used to be able to change the page size (usually increasing the size) and offsetting the placement of the content on the page to allow for a proofing stamp. This worked fine in Version 9, but I have not been able to do it since the upgrades. Lets say I take a half-page 5.5x8.5 and go to the "Set Page Boxes" dialogue box and want this to print out on an 8.5x11 sheet with it offset to the right 2.5in. I change the paper size to Letter then uncheck the center box and then adjust the XOffset to 2.5. The preview shows it moved and when I hit the enter button all of the content disappears and I am left with a blank 8.5x11 sheet of paper. Anyone have any ideas on how to fix this?

This question is still marked "NOT ANSWERED" - it's still a problem.
I can see that Shift+Cmd+T is the key command assigned for both "Insert Blank Page" and "Set Page Boxes" - so I've entered a bug report.
Can we please get an update for Acrobat XI for this issue and not make me install Acrobat DC (which may or may not even fix this)?
Thank you!

Similar Messages

How to make a thumbnail pic open in same page box not new page?

http://www.magazi-ag.com/rebuild.html

On that particular page you could use the Show/Hide behaviour.
Have the larger images in a hidden Div that is shown when someone mouses over or clicks on the thumbnails - set it up so that it replaces the large image above the thumbnails.
A bit of an explanation here (half way down the page_
http://www.adobe.com/devnet/dreamweaver/golive_migration/content/behaviors.html
On pages where you have more of a picture gallery, then the Lightbox effect would be ideal (link posted by Nancy).
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?

Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?
I am working on an end-user's computer, I just updated to the newest Adobe Reader and they don't ever print duplex. I want to be able to have the "print to both sides" box unchecked on the print dialog by default. Is there a way to do this? I have the printer settings all set to 1-sided but it is adobe print dialog settings that keep messing it up.
Thanks!

Hi John,
Have you tried repairing Reader and checked?
Does this issue occur only on this machine or are you facing the issue with other computers as well which have updated to Reader 11.0.10?
Regards,
Anoop

"Your Set-Top Box details could not be retrieved" on my TV service page

I just had TV service added yesterday. The DVR works. But when I go to My Services page on Verizon web site (http://www22.verizon.com/ForYourHome/MyAccount/Protected/Services/MyServices.aspx) it shows the box but not activated. After some help from live chat, I got it activated and can access DVR via web.
But after a few hours, the same page now says "Your Set-Top Box details could not be retrieved" and clicking at any of the links like "Record A Show" brings me to the On Demand/FlexView page (https://www36.verizon.com/fiostv/web/members/OnDemandHome.aspx) with no mention of DVR at all.
My FIOS was installed way back and is CAT5 on WAN. The new TV install put in a new Actiontec rev. F and kept the CAT5 WAN since the ONT doesn't have COAX WAN. Everything works inside the home. Just the web access is not working.
Any pointer where I should look?

Mine says that too, but I don't seem to have any problems accessing or programming my DVRs from the Web site.
I also have a CAT5 Ethernet run to the ONT, but I don't think that has anything to do with it.

When trying to set up synced text between pages, dragging a defined content box to a new page frequently causes Muse to crash.

Content frames that are created in desktop page. When attempting to drag the content box to a page in either the tablet or phone version, Muse will frequently crash.

Using Windows 8.1. No error message other than warning that program is closing [Windows generated] and your only choice is to click OK. I've subsequently discovered that if I drag the content box to the gray area rather than directly onto the page that it works without any issues. After dragging it to the gray area, I can then position it on the page with no problem.

How to stop text box on iWeb page from automatically reverting to hyperlink when I click 'save'

As far as I see, the main text box in the body section of my iWeb page reverts to a hyperlink (connecting to a file) when I click save. I don't know how the hyperlink got activated to begin with--I must have done something, but I don't know what it was. I tried this many times to fix it: went to Inspector "hyperlink" section, activated the text box in the page, un-clicked "make hyperlinks active" (so they are inactive), then un-clicked "Enable as a hyperlink." That much works--the hyperlink (little white arrow in blue circle) disappears from the lower right corner of text box. But as soon as I save (command S), the text box reverts to a hyperlink.
If I don't click save and move around the pages, it does not revert to a hyperlink. It only reverts to a hyperlink when the file is saved. Why is it doing this and how to stop this from happening--how to permanently return the text box to a non-hyperlink?
The website page is: http://www.usronline.net/USR/VedicResearch.html. If you click anywhere randomly in the main text, you'll get a prompt to download a PDF file. This should not be, but I can't get this hyperlink to go away for good.
Many thanks in advance.
Vishnupriya

Please pardon the reply delay--a big project deadline had to be met. Now back to this work:
Yes, the text in the oval object had a drop shadow (the oval object itself did not). I removed the drop shadow from the text, but the image file icon stayed in the right corner of the oval object. I deleted the text and then the image file icon disappeared. But as soon as I typed text again inside the oval object (not even pasting the previous text) the image file icon appeared again. I deleted the oval object entirely and simply typed the text inside the main text box itself. The image file icon that was attached to that oval object is gone (along with the oval object).
Still the image file icon is attached to the main text box, though. I again tried to uncheck the Enable as hyperlink (same process as described in first posting) with that oval object gone, but when I "save" again it reverts to a hyperlink.
Next I tried this: I copied the text from the problem text box and pasted it into another text box (outside of the problem one). Still in the new text box with the pasted text, the image file icon shows in the upper right corner.
I also removed all the drop shadow features from this main text box (there was one more, on some words typed in the main text box), but it is still showing as an image.
I don't know how it became an image file, and I'm still stumped as to how to fix it (short of forgetting about trying to figure out how it became an image and just retyping all text into a new text box).
The link you provided for "Web Safe Fonts" is returning this: "The server at www.ampsoft.net is taking too long to respond." I'm using Arial and Georgia (Georgia only on the menu and header text) in the site, and I had verified before designing the site that these are web safe, so I had thought they were.
If you or anyone have any further suggestions or suspicions on this matter, I'd be glad to hear them.
Thank you.

Adding a check box to my page clears the value in a hidden field on page 0

Hello, I hope that someone can assist me. I have a page that has multiple submit buttons on it. When I click a submit button the page refreshes to render the new content. I have a hidden field, and its region is set to one on page 0. Without any check boxes on my page, I can set a value in the hidden field, and it remains there even if I click on any submit buttons. If I put a check box on the page and then press a submit button, the value is cleared in the hidden element which is not desired. I did notice that in this case with the check box, if I refresh the browser the hidden field value is not cleared. Perhaps the page is being rendered differently after the submit because of the checkbox. Does anyone have any ideas of what is happening?

That doesn't sound right. Adding a checkbox shouldn't have that effect. Please try to reproduce this on htmldb.oracle.com so we can take a look or post a screenshot of your relevant page components.

Setting Custom Master page in search results page - Publishing site

Hi,
I have a publishing site, in which i have a custom Master page.
However when doing the search in the site, the search results does not show the custom Master page.
Is it possible to set the custom created Master page for the search results page? How to achieve this?
Thanks

Hi Venkat,
The search page for a publishing site is a file available in the layouts folder (I believe it is the osssearchresults.aspx if you see the address bar). It is used by all web applications and site collections in your farm. So ideally you should not change
it. I mean you can change it to point to your master page but it is bad practice ..
I would instead do the following
1. Create a custom search results web part page and place it in the site collection itself (one of the document libraries)
2. Custom search results is not difficult because all search results pages are made of a set of Out of the box search results web parts. If you add the same webparts to your page as the default search results page, you have effectively created a copy of
it
3. go to site settings --> search settings and change the search results page to your newly created page
4. The newly created page by virtue of its location will automatically use the master page the rest of the site uses.
I could not spend the time to try the above for you but I am sure the above will work.
Thanks and Regards,
Partha
AvePoint

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)??? -And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)???
-And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

Editable text box on each page, but generated from Master Page?

I want to create a blank text box that lives on the Master Page so that it shows up on each page in the document, but I then would enter custom text into the field on each page ( or just leave it blank).
I know, I know, I can do simply copy a text box from one page, and paste in place on all subsequent pages... or set it up once on a page, then just keep duplicating that page... or some other work around. But simple as those work arounds are, I'd just like a blank text box show up automatically on each page as a master page item, then I can enter text as a see fit and not have to do any duplicating tricks. I've looked up a few tutorials, but none solve for my need.
So I guess the real question is, does InDesign allow the content of a master page text field to be individually edited on the pages of the document itself?

It's bet to NEVER use the override master page items command since it overrides ALL master items. That's like using a wrecking ball as a flyswatter. And you don't need to put random text in the frame either (especially since you said you don't want to use it on some pages, though it might be best for those if you create another master without the frame). To override any master object hold Cmd (Mac) or Ctrl (Windows) + Shift and click on it with the selection tool.

How to create editable select box in jsp page

hi,
i got som peculiar requirement in my jsp page.i have my page like this.
<html>
<body>
<form name="test">
<select name="test">
<option value="one">USA</option>
<option value="two">India</option>
<option value="three">UAE</option>
</select>
</body>
</html>
this is one of the select box in my jsp page.
now i want to change the look and feel of select box..
1-dont want to show the scrollbar means the right side arrow which allows to see the total options in select box.
it should look like normal text box.
2-roveer apert from the existing values if there is no matching value user must be allowed to enter his own value in above select box..
how i can solve this problen..
regards,
sam

Is that maybe a browser memory auto-complete thing? It works on Netscape 7.2. But no, it's not a browser auto-complete thing (does NS have that? IE does... either way, I would've disabled that). It's definitely a Javascript trick, I'm sure of that. I know I haven't sent mail to all people in my address book from my work PC, but it doesn't stop them from showing in the list as I type...
Unless there is a special HTML tag option or browser extension that I've never heard of that allows you to supply a set of values to a text input field for auto-completion (as opposed to the browser remembering what was typed).

Set margin of in the page setup

hai everybody i have a problem to set the margin of a table in the spreadsheet. can any one give me an idea on how to set the margin in the page setup...

Post Author: mike7510uk
CA Forum: General
V361:I have CR XI, you should be able to right click the box, format text, click paragraph, and set the right margin at .5 or something, Set box to can grow to handle the height of the paragraph.
ahhhh works fine, thank you so much, was stuck on this for ages and that was the only thing i didnt try!!

I have a new iMac. I have set up a user page for myself, for my wife and an administrator page. My question is my wife needs files from my user page transferred to her page. What's the easiest way?

I have a new iMac. I have set up a user page for myself, for my wife and an administrator page. My question is my wife needs files from my user page transferred to her page. What's the easiest way?

I've done this by dragging files from my user page to her drop box. In Finder, drag the required files and hover over the hard disc icon in the navigation bar on the left. As you hover, it will open another finder window showing the contents. Work your way down these windows into <Her username | Public | Dropbox>. Drop the files into the dropbox. She can then retrieve them from her user page.
Good luck,
Stephen

How to Submit a Concurrent Request Set Using a Self-Service Page

Hi all,
I would like to know how to Run/Submit a Concurrent Request Set Using a Self-Service Page
Thanks.
Bench

Hi all,
I would like to know how to Run/Submit a Concurrent Request Set Using a Self-Service Page
Thanks.
Bench

Not able to get Out-of-the-Box Examples Index Page for running the jsp examples

Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas

Hi.
Please post all WLS 7.0 beta questions to the beta newsgroups -
weblogic.developer.interest.70beta.*.
Thanks,
Michael
Vikas wrote:
Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas--
Michael Young
Developer Relations Engineer
BEA Support

"Set Page Boxes" XOffset/YOffset - Page Disappears??

Similar Messages

Maybe you are looking for