Set pagefile size to 1.5x RAM

Hi guys,
Could not find another forum for this. Trying to automate Server 2012 R2 deployments, in our normal checklist for deploying an OS, someone has to go in and set the pagefile to 1.5x RAM on server. Majority of our servers have 4GB, but can vary +/- a few
GBs. What I am looking for is something I can have run from Altiris to query amount of RAM installed and then set pagefile initial & max to 1.5x RAM installed. 
Any help is appreciated. Thanks.

JRV,
Everything I've found on TechNet says the same that 2008 and above has improved very much on the way it automatically handles the pagefile. I have conveyed that to our server manager, but he still thinks that we should be setting a static size. I'm still
trying to sway him. If we have a large static pagefile, we usually do move those to another drive. 90% of our data center is virtual. But still looking for a way to automate it in the event he overthrows my recommendation and insists that we set at 1.5x. 

Similar Messages

  • Set up virtual memory for 6gb ram

    hi ,
    can any one please tell me how to set the virtual memory custom size for 6GB ram?

    Frederic,
    Those rules of thumb stem from the era when is was common to have 2 or 4 GB of memory, but with memory in the range of 12, 16 or 24 GB, I think we can forget about that rule of thumb. I would use a rule of thumb that the sum of installed memory and pagefile need not exceed 32 GB. With disk space being so cheap there is no reason to skimp on pagefile size, but with increasing amounts of installed memory, the pagefile will be used less and less. The general rule that Windows applies would result in a pagefile of 36 GB on a 24 GB system and that is overdone IMO. On a 48 GB system, Windows suggests a whopping 72 GB pagefile! That makes no sense. So, on a 48 GB system even a 4 GB pagefile would likely not be used at all, but Windows requires one to be present, otherwise it will create one for you on C, which is dynamically allocated and that is worse than a fixed, static pagefile as the first file on another disk.
    Of course, if you make it a habit to switch between AE, PR, Maya and other applications a lot and work on files with large pixel dimensions, the sum total can easily be increased to 48 GB.
    My suggestion is to use common sense.

  • Setting 16GB SGA out of 23GB RAM in 64 bit Linux AS4 Update4 for Oracle10.2

    Dear All,
    I am trying to install Oracle10gR2 on my 64 bit Linux AS4 Update4 server. My RAM is 32GB, i want to set SGA size 16GB.
    1) Can the linux server allows 16GB SGA?
    If it doesn't allow, what are the things i have to do to set the SGA size 16GB
    2) Please let me have a document of 10gR2 installation on 64bit AS4Update4 Linux.
    Thanks in advance
    Mahi

    On 64-bit, there is no limit on SGA size, just set sga_target=16g.
    For documentation, see the usual http://tahiti.oracle.com, http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm (AMD64/EM64T) or http://download.oracle.com/docs/cd/B19306_01/install.102/b15674/toc.htm (Itanium) or others (zSeries, IBM Power) - this depends on HW platform for the Linux. There is no special guide for RHEL/Suse/Oracle Linux, vendor-specific info is always included in the installation guide itself.

  • Set maximum size in Text Form Field Options for a field in bi publisher RTF

    Hi All,
    How to set maximum size in Text Form Field Options for a field in bi publisher RTF.
    I have a RTF whch is having a field in that i need to add some validation condition but after adding certain condition in Add help text tab ,it is not accepting after certain length, how i can increase the length to unlimited,please help me on this
    Thnaks

    Form fields have some restrictions if your are using version lower than 11g.
    They can accommodate only 393 chars. You can add the text in both status bar and help key, which can in total consume 393 chars.
    If your code logic is more than that, it can be split into multiple form fields as Avinash suggested or you can use sub template logic and handle coding over there. Again in sub template code can be within/outside form fields.
    So there is no option for user to increase the size of form field.

  • How do you set the size / bounds of a waveform chart at run time?

    I have a plot area that I would like to fill with as many waveform charts as the user specifies (at run time). The "bounds" property is read only and I haven't noticed an additional "size" property for a waveform chart as there is for a button. Is there a way to set the size of a waveform chart at run time, and if not, why not? (Labview 6.1)

    Look at it a little more carefully, I suspect that your assumption is only half wrong. The property does only resize the plot area--LV resizes the frame to fit the resized plot on it's own.
    You'll need to bear this in mind when you're figuring-out what size to set the property to.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How to set the size for height of iView tray?

    Hi,
    I have created a ABAP webdynpro component and integrated this comp with iView. Then i integrated iView into Page in portal. That is working fine.
    But the size of tray/window which is displayed in the page is very small.
    How to increase the height of that Tray/window/iView containing my component?

    Hi,
    By changing the maximum automatic height and Minimum automatic height property of the iview you can set the size for height of your iview.
    to do this follow the setps:
    goto content administrator -> portal content -> your folder where you created your iview or directly to your iview -> right click -> open -> object,
    and now in property category choose appearance-Size from the drop down menu and set the above properties to your required height.
    if you want the end user to modify this property set the property to read/write .
    *********please reward points if the information is helpful to you********************

  • Export in iPhoto offers a "Custom" setting for size. The default is 1000. 1000 what? Pixels, centimeters, MB's?

    Export in iPhoto offers a "Custom" setting for size.
    1000 is the default, but I don't know what 1000 refers to.
    Pixels, centimeters, MB's?
    I want to make the photo an 1 inch x 1 inch.
    Do I go up or down from the 1000?
    Thanks

    Pixels.
    For a 1" x 1" photo first crop the photo square.  Then export  with Kind = Current with JPEF Quality = Maximum and Size = Full size.
    Then when you go to print the photo select a 1" x 1" print size.  This will squeeze all available pixels in each dimension into the 1" dimension giving you the highest DPI resolution available from your image file. 
    More about DPI can be found here: All About Digital Photos - The Arithmetic of DPI and All About Digital Photos - The Myth of DPI
    OT

  • Is there a way to set target size in Compressor

    I know this may be too general of a question, but i'd really like to find a way to set the size of a compressed file. I have to upload videos to and online host server and my max is 1.5 GB. right now i have to fool around and try different codecs to see how big they are and sometimes i have 20-30 minute videos. and it's pretty poor work flow to wait an hour to encode only to find out that it's way tpp small or way too big.
    also any suggestions on which codec i should use to upload videos from 15 seconds to 30 minutes with a 1.5 GB size cap would be great
    thanks

    I'll answer your first question first.
    Best codec for quality is H.264, one good settings folder is the following:
    Settings tab>Apple>Other workflows>Web>QT7 compatible>Pick your H.264 setting (For flv you'll need a third party plugin or software).
    You want to know how big your file is going to be before encoding?
    Choose your setting. Set your preferred bit rate then in Inspector window click on the "summary" button (first from left before the encoder button).
    Look carefully through the listed info, there you'll find out what the estimated file size is. If you change bit rate again the estimated size will change too.
    G.

  • Setting page size in Numbers on Ipad?

    Anyone know if you can set page size in Numbers on Ipad?

    I don't see a setting for page size.  Everything else related to that (sans setting the page size) appears to be found here:
    Click the wrench
    Share & Print
    Print
    Select portrait/landscape, content size, page numbering, headers
    Done (don't actually print it)
    I wonder if you set the page size when you actually go to print it.  I don't have a printer to try it on. Otherwise it looks like 8.5x11 is all you get.

  • How can I set the size of the font so I don't have to change every new word?

    How can I set the size of the font so I don't have to change every new word?

    In what application?

  • How to set the size of printing subject

    I have a deskjet 3520 all in one and my computer is a laptop dv6 with windows7 prof. 64bit.
    I want to print out PCB traces so that I can make my own but I don't know to how set the size
    with this printer. They take up the whole page when I want them to be 2.35x3.35.
    Don't know if this can be done with this printer.
    Any help would be apreciated.
    This question was solved.
    View Solution.

    Can you post a link to a sample, or upload here a sample?  That would make it easier to debug what is going on.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to set the size of an open dialog

    HI Everyone:
    I cannot set the size of the open dialog.
    I create a menu and menu item called "open"
    The menu item "open" will call OpenFile().
    However, I cannot set the size of the open dialog
    Everytime when the open dialog pops up
    the size isn't 500 x 500.
    Does anyone know what's wrong with this program ?
    Thanks a lot,
    Rodger
    ================================================================
    public void OpenFile(){
    JFileChooser fc = new JFileChooser();
    fc.setSize(new Dimension(500,500));
    fc.setFileSelectionMode(JFileChooser.FILES_AND_DIRECTORIES);
    fc.showOpenDialog(this);
    ================================================================

    Try this and then tell us if it worked:
    JFileChooser fc = new JFileChooser();
    fc.setPreferredSize(new Dimension(500,500));
    fc.setFileSelectionMode(JFileChooser.FILES_AND_DIRECTORIES);
    JDialog d = new JDialog(new JFrame());
    d.setSize(500, 500);
    d.getContentPane().setLayout(new FlowLayout());
    d.getContentPane().add(fc);
    d.setVisible(true);

  • How to set the size of SUM()/SUM() of NUMBER Tyep?

    I met the oracle truncation error when I post the
    SUM(a field)/SUM(b field), a and b field are NUMBER Type
    From the OCI Doc, Numbers with up to 38 digits precision.
    and I set the size of data buffer 41 for NUMBER TYPE.
    (for example)
    rc = OCIDefineByPos( hstmt, &m_pDefine, ((CEBOracle *)pDatabase)->m_hpErr, index,
                   (dvoid *) m_lpszBindData, m_nBufSize+1, SQLT_STR,
                   (dvoid *) m_cbIndicator, (ub2 *) 0, (ub2 *) 0, OCI_DEFAULT);
    I always set the output datatype as SQLT_STR
    and m_nBufSize is 41 for NUMBER Type
    my client met the error when the result is 0.00012345678912345678912345678912345678912
    I think that it's not a solution that just enlarge the number form 41 -> 45
    How can I avoid this problem when user send the SQL Statement that the result has unlimited decimal number?
    Thank you in advancd

    ORA-01406 fetched column value was truncated
    I found the reason of that problem.
    I migrated from OCI Ver7 to Ver8
    If I set the buffer size to 10 (actually 40 in my program) and the result was
    0.0000000000000000001
    When I debuged the output buffer
    The result was 1.0E-19
    but now 0.00000000 and truncation error
    how to change floating point and scientific expression automatically depend on the result like OCI Ver7 and SQL PLUS?
    I changed define function
    odefin(m_hstmt, ii+1, (UCHAR *) m_lpszData[ii], m_lpLength[ii]+1, SQLT_STR, -1, m_lpcbValue[ii], 0, -1, -1, 0, 0);
    to
    m_rc = OCIDefineByPos( m_hstmt, &pDef, ((CEBOracle*) m_pDatabase)->m_hpErr, ii+1,
              (dvoid *) m_lpszData[ii], m_lpLength[ii]+1, SQLT_STR,
              (dvoid *) m_lpcbValue[ii], (ub2 *) 0, (ub2 *) 0, OCI_DEFAULT );

  • How to set the size of popups from KM Navigation Iview

    Hello guys
    Does any of you know how I can set the size of the window that pops up when you click on a resource/file in a KM navigation iview?
    I have tried to enter "width=100,height=100" (without the quotes) in the Window Features property of the KM Navigation Iview, but it does not influence the size of the popups.
    Any suggestions to what could be wrong? Or is it not possible at all to control the size of that popup?
    Kind regards,
    Martin

    Hi,
    I cheched yesterday if I could find the command, sorry I couldn't.
    I also realized that the layout generates html link tags (ie. <a />) for the resource links, no javascript open link functions (ie. window.open), wich doesn't alowed (as far as I know) to give size to the pop-up window.
    So to make the link of the resource (gived by the <b>displayname(contectlink)</b> property set) I think you would have to <i>create (develop)</i> the layout, so the link will be rendered with window_size.
    You have other option, you can take off the "<i>contentLink</i>" setting. and add the <b>download</b> command, so the user who want to open / save the document can click on this command and do it in their PC.
    I.E, Create a copy of the <b>download</b>, and add this to the Collection render displayed porpeties:
    rnd:command(command=Z_download/style=link)
    You ca also use and icon to represent the download (you can set that icon in the command)
    I.E, rnd:command(command=Z_download_icon/style=icon)
    This last options represents a problem with the km-only-read content like xml files generaded by xml forms, it can only be readed in the km-portal.
    I hope this might help you.
    Best regards,
    Jorge M.

  • How to set the size of JTextPane according to the size of text??

    hello
    how can i set the size of JTextPane according to the size of text it would contain in such a way that JTextPane should not have ScrollBar.

    StanislavL wrote:
    width should be defined for your container width. suppose you have a very long row of text. Widht full screen widht it wraps into 2 lines but if you set widht of your window to half screen widht there should be 4 lines.
    But you can use the same code and get preferred widht as well.u mean like this :
    objTextPane.getParent().getWidth();Edited by: 811243 on Sep 6, 2011 5:32 AM

Maybe you are looking for