Set paper size for image on roll paper

Q I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9. Thank-you, John

Garry - Many thanks for the reply. I was following the usual routine but I had never needed to use the 'User defined' box previously but it appears this is vital to the whole process when using roll-paper. I also found that the paper height becomes the Length when using roll-paper. I nearly entered the paper height (as requested) as 10m (length of roll) but you need to enter the length of the actual print required or the print process will start in the middle of the 10m roll! always seems to be that little extra missing from the manuals! John

Similar Messages

How to set the size for height of iView tray?

Hi,
I have created a ABAP webdynpro component and integrated this comp with iView. Then i integrated iView into Page in portal. That is working fine.
But the size of tray/window which is displayed in the page is very small.
How to increase the height of that Tray/window/iView containing my component?

Hi,
By changing the maximum automatic height and Minimum automatic height property of the iview you can set the size for height of your iview.
to do this follow the setps:
goto content administrator -> portal content -> your folder where you created your iview or directly to your iview -> right click -> open -> object,
and now in property category choose appearance-Size from the drop down menu and set the above properties to your required height.
if you want the end user to modify this property set the property to read/write .
*********please reward points if the information is helpful to you********************

How to set percentage size for layout? for example : VBox,HBox,AnchorPane,.

how to set percentage size for layout? for example : VBox,HBox,AnchorPane,......
like HTML
<div width="640px" height="480px">
<div widht="50%" height="60%"/>
<div widht="30%" height="60%"/>
<div widht="20%" height="60%"/>
</div>
-----

This is not supported. You can file a feature request at http://javafx-jira.kenai.com

Set height size for each state enabling browser scrollbar if needed..

I'm working on a flex project, completely new to it. I'm trying to resize my application based on the set height size for each state. I'd like the wrapper to resize in the browser so that the browser's scroll bar appears if needed. hope this makes sense....
My enitial opening page I've set the height to 1000. now when I click on a link to another state from this page, we'll call it 'home' which i have set to 2000
The page opens in its 2000 height but no scroll bar appears to scroll down in the browser...
If anyone's done this or knows how to, I'd really appreciate your input.

I've done something similar with a few of my apps, you have to use a little javascript on the html page and the ExternalInterface class in your app. Basically, you need to resize the "browser's" height based on your flash file. So here's quick example:
In your html template page (which you can edit in your flashbuilder project panel ->html-template->indext.template.html)
in your html add the jscript function:
<script type="text/javascript">
function setWindowHeight(heightVal){
document.getElementById('theWindow').style.height=heightVal; // make sure to give the body tag an id of 'theWindow' or whatever
</script>
In your flashbuilder app you need to call the javascript fx, you can use the ExternalInterface class for this:
ExternalInterface.call('setWindowHeight',val+'px');
you need to send the jscript fx the height of your container or whatever you want it resized to....

How to set output size for mp4?

Hello,
I'm having a problem with the export of a Captivate video tutorial.
The output size is w 1440 x h 900 pixels. It comes out looking fine, but as soon as we put it through any other transcoding process as required by our own workflows, the image quality deteriorates.
Now, I've read in this forum that any alteration of the size of the image will cause this deterioration in quality. Effectively, the dimensions of the transcoded output from our own video editors are much smaller than those of the input mp4.
However, we would like to keep that smaller size because it makes for better performances in video streaming.
Is there any way in Captivate to set the dimensions for the mp4 output to be smaller? The 1440 x 900 dimensions are already different from the capture area (the whole screen), so it seems they are independent from the capture settings.
Thanks to anyone who can help.
Elisa Roselli
Technical Documentation Manager
Cambridge Imaging Systems

Apple no longer supports Safari for Windows > Apple apparently kills Windows PC support
Use either IE or Chrome.

Set Maximum size for a subpanel created with splitter bars in LV8

Does anyone know how to set the Maximum size for a subpanel created with asplitter bar? If I show one cluster in the subpanel and use the scroll bar to scroll, I can see more (blank) area than I want. I just want the user to be able to scroll a cluster within a subpanel while the cluster is larger than the view area of the subpanel. I don't want to let the user scroll outside the cluster.
Ravi Beniwal

I apologize for the mixup in terminology. Please read Pane wherever the word Subpanel was used.
Please see the attached VI for a description of my problem.
I would really appreciate any help with this.
Ravi Beniwal
Attachments:
Pane Scrolling Problem.vi ‏10 KB

How to set default size for published SWF in Catalyst CS5.5

I create a 800*600 pixel project in Catalyst CS5.5 and published it as .swf.
But when I opened the published .swf, the default size is smaller than 800*600. I have to resize it by myself.
So is there any method that I can set the default size for published .swf?
Thank you guys! Best regards.
Nick

When you start new Flash Catalyst project, you have the option to enable resizing
This setting is enabled by default.
If you need to change this later, you can go into Modify > Artboard settings.
Now when you publish your project, the width and height will be used instead.
As to manually editting the HTML file, there are 3 tag sets that define the width and height of the project (to handle various browsers). You will need to adjust the values in each of those tag sets. You should only need to do this if you can't republish the file.
Chris

How to set fixed size for inputfile text field

Hi all,
I am using inputfile component to test file uploading so I created a simple upload page. When I finished upload the file, the input text field will "shrink" its size and change the size to adjust the file name. Is there any way to set a fix size for input text field?
Here is some part of the code:
<af:form id="f1" usesUpload="true">
<af:panelHeader text="File Uploader" id="ph1">
<af:inputFile label="File to upload" id="if1" autoSubmit="true" valueChangeListener="#{fileBean.fileUpdate}"
value="#{fileBean.file}" partialTriggers="if1"
columns="50"/>
</af:panelHeader>
<af:commandButton text="Save" id="cb1"/>
FileBean:
public void fileUpdate(ValueChangeEvent valueChangeEvent) {
RichInputFile inputFileComponent = (RichInputFile)valueChangeEvent.getComponent();
UploadedFile newFile = (UploadedFile)valueChangeEvent.getNewValue();
UploadedFile oldFile = (UploadedFile)valueChangeEvent.getOldValue();
Thanks,
Jerry

you can set columns attribute in af:inputfile. Please see highlighted area i have inserted to you code
<af:form id="f1" usesUpload="true">
<af:panelHeader text="File Uploader" id="ph1" columns = "34" >
<af:inputFile label="File to upload" id="if1" autoSubmit="true" valueChangeListener="#{fileBean.fileUpdate}"
value="#{fileBean.file}" partialTriggers="if1"
columns="50"/>
</af:panelHeader>
<af:commandButton text="Save" id="cb1"/>

Set font size for ChoiceGroup

Hi,
Is there any way to set font size of the String elements of ChoiceGroup

Hi,
Yes, there is, but only if you're using MIDP2.0.
Check the API documentation of ChoiceGroup and see that there's a setFont(.., ..) method. The given index (int value) identifies the index of the element in the list for which the font will be set. This means that different elements in one choicegroup can have different fonts.
Test it carefully, I've noticed that not all devices show correct behaviour on this. Also note that certain devices ignore certain font settings (for example italics, because a lot of native implementations won't have a font in italics).
Good luck!

Set specific size for JTextfield/Jbutton in BorderLayout?

can some one tell me how to set a specific size for JTextfield/JButton in Border/BoxLayout please?
I stried setSize, setPrefersize, setMAxsize, setMinsize, setBounds... but it won't work?
For example. If I add a jbutton to a jpanel, which has borderlayout, it will take up ALL the space in that jpanel.
Thanks

Typically you use a BorderLayout for the high level layout and then add panels using other layouts to the BorderLayout. So for example on a simple dialog that is using a form that asks your for your first name and last name you would build a panel with those fields and add that panel to the center of the BorderLayout. Then you would create another panel for the "Ok" and "Cancel" buttons which would typically use a FlowLayout. Then you add that panel to the South of the BorderLayout.
The Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html]How to Use LayoutManagers has all the information you need to know on using layout managers.

Max Size for Image Upload

Hi Frenz,
I am planning to use Oracle AppEx's file upload functionality to upload image to DB. I would like to know
Is there any size limitation for Image to be uploaded. Ex: can't exceed more that ! MB?
Does it support all types of Image format like JPG, BMP.
Will be Using a third party reporting tool to generate roprts.
So need to know how fast is the retrival process from backend.
(Am aware this is not a Oracle AppEx related question!! But incase if any use this in your projects !!)

The following parameters should be used
org.apache.myfaces.trinidad.UPLOAD_MAX_MEMORY
org.apache.myfaces.trinidad.UPLOAD_MAX_DISK_SPACE
Instead of
oracle.adf.view.faces.UPLOAD_MAX_MEMORY
oracle.adf.view.faces.UPLOAD_MAX_DISK_SPACE
Please check the following post:
ADF file upload size
Thanks,
Navaneeth

Manually setting up size for shapes or stroke width bug

Hi everybody,
Since I installed Photoshop CC 2014 I have the most annoying problem.
I can't seem to change the sizes of my shapes or the stroke width manually.
So let's say I created a square of 150x150 and I want a new size of exactly 126x126, I can't write the exact size in the top field.
I write it and, once I press tab to leave the field, it puts back the previous value.
Same for stroke width. I'm obliged to use the slider to be able to change the width of my stroke - which obviously is everything but precise.
I don't know if I missed something but this is the first time is happening since I'm using Photoshop.
Thanks for your help!
Doro.
UPDATE 29/01/15
This is coming a bit late but it seems we found where the bug is coming from.
I'm using a macbook pro retina 13 with a french keyboard. To type a number I need to press shift + the number.
So to get back to my example I want to change the size of 150px to 126px. I would write the number 126 in the size field and to do so I would need to press the button shift + 126. The fact is that once you're interacting with the size field in the top menu, it seems that the shift button triggers the path operation "combine shapes" and overrides my action of typing a number.
Let us know if you can do something about it.

hi Y. BIG time thank you for this. i was not aware this was such an issue. i definitely cannot have any ambiguities in my spreadsheet and customizing it in numbers is the whole reason i am spending this time formatting (i.e. to make it intuitive and visual).
that said, if accepting excel and then exporting to excel will cause problems i absolutely cannot have this.
can you help me a little more on what the problems are? i have already got a file with two tabs directly imported from Quickbooks (by my book keeper in excel) and a tab that she set up that pulls data from these tabs - and then i have MY tab that i have been customizing and proofing and fixing as i go along. more info on this work below.
are there commands i can run to clean this up?
what is considered OK to do in numbers if i am accepting excel (printing? adding new numerical entries)?
THANK YOU
background: right now i am /mostly/ doing formatting things like adding bold outlines or adding color or whatever but i have /also/ been dragging and dropping some rows to put them in a better place and fixing some cell sums that were either left out by my book keeper or which needed to be added to check THEIR work. are you saying that by doing this i am setting myself up for various formatting issues such as merged cells?
if so, once i finish the format of the spreadsheet and the tabs i can only exclusively open in numbers if this is necessary. are there some commands i can run to "clean up" issues? for instance can i go around the various tabs and unmerge cells to clean things up?
also, i definitely cannot split up tabs into individual documents as the customized spreadsheets are pulling numbers from a set of tabs that are quickbooks imports....

Set Maximum size for combobox editor in JTable

Hi guys.
I have a JTable with a custom JTextArea as editor for string datatypes.
On the other hand, I have a combo editor too for some other columns of the table.
My question is to know whether I can force the combox editor not to grow along with the text area.
When I have a multiline text in a cell, I don 't want the combo box editor to fill the entire height of the row (the row height is continuously adjusted as user enter text into the text area cell editor), but to remain as big as just to render one line.
Thanks.

you know there's a swing forum, why not use it :-)
As to your problem: the basicUI simply forces all editors to fit the cell size, returning more reasonable max-sizes for the combo wouldn't help. Way out might be to wrap into a panel with an appropriate layoutManager. Not entirely trivial, would expect some work ...
Cheers
Jeanette

How to set the size for Popup with contains a Region

Hi,
i use ADF 11g (JDEVADF_11.1.1.1.0_GENERIC_090615.0017.5407) with ADF Faces as Frontend.
I have a Region (with many content) in a popup. When I call the popup the size of the popup is very small.
If i set explicit the width and height in px it works, but if I set the width and height in % it doesn't works.
        <af:popup id="p1">
          <af:dialog id="pw2" type="ok"
                     partialTriggers="t1:showBook">
            <af:region value="#{bindings.bookkeydata1.regionModel}" id="r1"
                       inlineStyle="width:850.0px; height:600px;"/>
          </af:dialog>
        </af:popup> It is possible to get the max. height and witdth from the browser-window in a Bean and set it dynamicly to the region?
To set the size in px is not the best solution I think.
kind regards
Martin

Hi,
Try setting percentages using af:panelStretchLayout inside a popup.
Thanks.

Setting a Size for JList?

Hi,
How can I set the size of this? ... it currently squeezes it into the smallest box thing... how can I give it more space...?
DefaultListModel listData = new DefaultListModel();
listData.addElement("item 1");
listData.addElement("item 2");
listData.addElement("item 3");
listData.addElement("item 4");
listData.addElement("item 5");
listData.addElement("item 6");
listData.addElement("item 7");
listData.addElement("item 8");
listData.addElement("item 9");
listData.addElement("item 10");
JList list = new JList(listData);
JScrollPane scrollPane = new JScrollPane(list);instead of
|.item 1.|
|.item 2.|
|.item 3.|
|.item 4.|
I want something like
| . . . item 1 . . . |
| . . . item 2 . . . |
| . . . item 3 . . . |
| . . . item 4 . . . |

how can I give it more space...?From the JList API:
setFixedCellWidth(...);
setPrototypeCellValue(...);
Another way would be to change the renderer used to display the value. Create a custom renderer that uses an EmptyBorder. The JList API has a link to the Swing tutorial on "How to Use Lists", which will explain the concept of renderers in more detail.

Set paper size for image on roll paper

Similar Messages

Maybe you are looking for