Set Parameter id is not working in case of select-options

Hi,
i am using the below code to get the SWIA first field fill with some data which i am getting by logic written..but its not getting filled since in tcode the first input box is select-options not a parameter..if it would have been a parameter than my logic would have worked finest. so kindly suggest what to do now in case of select-options.
form user_command  using p_ucomm    type sy-ucomm
                         p_selfield type slis_selfield.
  data : wi type sww_wiid .
  clear : wi .
  read table it_final into wa_final index p_selfield-tabindex.
  if sy-subrc = 0.
    check ( wa_final-wi_id is not initial ).
    wi = wa_final-wi_id .
    case p_ucomm.
      when '&IC1'.
        set parameter id 'WID' field wi.
        call transaction 'SWIA'and skip first screen.
    endcase.
  endif.
endform.
Regards,
HiM

ThanQ..i got you totally..thanks to remind
Regards,
HiM

Similar Messages

  • MDX -Children count function Not working in Case statement

    Hi,
    I am trying to create set when you slice with the Hierarchy member is leaf level , I want a output only that Leaf level .
    and When I slice with  the parent level , it has to give all the members below that parent level.
    But the problem here is when I select child member or leaf member , The first condition in the Case is not working
    WITH SET
    TESTSET AS
    CASE
    WHEN
     [Dimension].[Hierarchy].currentmember.children.count<0
    THEN
     [Dimension].[Hierarchy].currentmember
    ELSE
     DESCENDANTS([Dimension].[Hierarchy].Currentmember,,AFTER)
    END
    SELECT
    WBSSET ON 1,
    {} on 0
    FROM
     (SELECT {[Dimension].[Hierarchy].&[10]} ON COLUMNS FROM [CubeName])
    Thanks,
    Santosh

    Hi Santosh,
    I don't think Children count function not working in case statement, I have tested it on my local environment, here s the sample query for you reference.
    with member
    testset as
    case
    when
    [Geography].[Geography].currentmember.children.count<10
    then "X"
    else "OK"
    end
    select testset on 0,
    {[Geography].[Geography].[Country].members} on 1
    from
    [Adventure Works]
    In your scenario, the issue might be caused by the query isself, you can try to use IsLeaf Funcion to achieve your requirement. Please refer to the links below.
    http://msdn.microsoft.com/en-us/library/ms144932.aspx
    http://www.databasejournal.com/features/mssql/article.php/3633696/MDX-Operators-The-IsLeaf-Operator--Conditional-Logic-within--Calculations.htm
    http://www.mdxpert.com/Functions/MDXFunction.aspx?f=22
    Regards,
    Charlie Liao
    TechNet Community Support

  • [svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

    Revision: 4323
    Author: [email protected]
    Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
    Log Message:
    Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-544
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

    Running the script by python2 solves it for me:
    su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
    Best regards,
    Cedric

  • Input Parameter Mapping is not working in Sap HANA

    Hi, We created on ANALYTICAL view(A) with Input Parameters, on top of Analytical view created one Calculation view(B) and mapped Calculation view input parameter with Analytical view input paramter and its working fine. Finally we created one more calculation view on top existing calculation view(B) and mapped with corresponding input parameters. Input parameter mapping is working fine in between A(analytical view) and --------> B (first Calc view) but input parameter mapping is not working properly in between B(first Calc View)-----------C(second Calc View). it is giving all data whatever is coming from Calc View B. Kindly help us to resolve this.

    Hi,
    Write c in small for Command,
    theButton.mappingOfOnAction().addParameter("command","Save");
    Regards,
    Murtuza

  • I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    Is it this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Otherwise:
    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • NGS Sponsors authentication does not work in case user has non-English character in his password

    Hi,
    we are using the NAC Guest Server v 2.0.1 and have Sponsors authentication done through Radius servers. Radius servers are Microsoft IAS using AD.
    Sponsors user authentication works okay in case user's password includes English characters, but does not work in case an user uses national characters like for example Umlauts in German.
    On Radius server I can see these error messages:
    User XXXX was denied access.
    Reason = Authentication was not successful because an unknown user name or incorrect password was used.
    As soon as an user changes his password and uses English characters only, it resolves.
    I guess this might be that NGS uses different coding while sending a password to Radius server, but not sure.
    Appreciate if anyone knows a root cause and what could be a workaround. Unfortunately our AD policy allows users to use national characters and we can hardly change it. So a change on NGS or Radius side would be more viable.
    Many thanks for your help.

    A case has been opened at Cisco and it is now quite clear that it is a problem with coding.
    According to Cisco development team NGS uses UTF-8 coding to send the password, of course encrypted, to the Radius server. This cannot be changed within NGS. We use Radius Microsoft IAS Version 5.2.3790.3959 running on VMWare Windows 2003 SP2. More tests are scheduled to be performed.

  • The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA

    The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

    I never notied that icon before, and I've been using Bridge for 7 years.
    Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
    To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
    http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
    This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
    If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
    PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow.

  • In dubai FT,siri are not working in case when we move other country could we activate those feature in that country

    in dubai FT,siri are not working in case when we move other country could we activate those feature in that country

    Facetime is disabled in hardware per request of Dubai government. It
    will not work if you move to another country. If you move and wish to utilize
    Facetime, sell your iPhone before moving and get a new one at your new
    location.
    Apple has not announced if/when Siri will work in Dubai.

  • My notification tone when set to 'Silent" is not working even when setup on lolipop

    my notification tone when set to 'Silent" is not working even when setup .
     My notification tone when set to  'Silent" is not working even when setup . It still keeps ringout . This is highly disappointing

    Hello, Yes I have tested this with Android Lollipop and found that when the tone is set to silent within the BBM settings I do not receive any audible notification. Testing summary: Access the More menu - Settings - Tone dropdown and set Tone to BBM
    - Send a test message and an audible notification occursAccess the More menu - Settings - Tone dropdown and set Tone to Silent
    - Sent a test message and no audible notification occurs To allow us to assist further please follow the steps below to create a support ticket and submit logs. Once submitted someone will contact you to troubleshoot the issue.
    1) Browse to www.BBM.com/support/blackberry
    2) Locate the Need more help section is the bottom right of the page
    3) Select Contact us for additional assistance
    4) Complete the web form, provide as much detail as possible such as PINS involved and timestamps
    5) Select Submit to create the support ticketOnce the ticket has been submitted you will receive an email with your ticket number. This ticket number can then be used to submit logs. To collect logs use the following KB:
    KB35080 - "How to submit logs from BBM for Android, iPhone, and Windows Phone" - www.blackberry.com/btsc/kb35080 Thanks,
    Daniel

  • Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

    Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

    Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
    Many thanks.

  • Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out.

    Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out.  HP 600-1315xt.
    Have tried everything I can find on internet and here on HP. None of the suggestions worked. Windows fixit for windows could not fixit. Any suggestions are appreciated. I can always use my disks and rebuild the computer. A last resort.

    Hi,
    It might be the graphic driver not compitable with the graphic device.  Has there been a change to the graphic driver?
    One thing you can try is to uninstall graphic driver and download the latest from Windows Update (if you haven't tried this).  Here are the possible steps:
    1.  Go to Control Panel->Hardware and Sound->Device Manager,  uninstall the graphic card driver by right clicking and select "uninstall".  Make sure the option "Delete the driver software for this device" is selected.
    2.  Reboot the system.
    3.  Go to Control Panel->System and Security->Windows Update, click on "Optional updates" and find the driver for g210 and do the update.
    I work on behalf o HP.
    Please click the white Kudos star to say thanks.
    Please click Accept As Solution if you found my response helpful.

  • Option of 'Restore Last Session' not working. Is there any option to repair the 'Mozilla Firefox' without loosing History?

    Option of 'Restore Last Session' not working. Is there any option to repair the 'Mozilla Firefox' without loosing History?

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js [2] file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js

  • -moz-transform:scale does not work in Firefox with select tag(DropDown)

    -moz-transform:scale does not work in Firefox with select tag(Dropdown). The Dropdown options are being displayed at incorrect location.

    'Hi, Please try the HTML attached in image. This works in IE, Safari, Crome but not in Firefox

  • After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock

    After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock.

    Hi
    A long story about your issue... I think the reason of this is why you have deleted some registry keys. If you delete something in the Windows registry you should really know what you do. You can damage the complete Windows system!
    So I think this is the reason why the keyboard doesnt anymore.
    In the user manual I have founded that the CD-ROM booting option is only available with optional optical disk drive.
    So for me it sounds like that your USB CD drive is not compatible to the notebook

  • Email notification mail not working in case of customer repository

    Hi Experts,
    We have the system MDM 7.1 SP06, we are not able to get the email notification for customer repository. For other repositories like material & vendor mails are working fine. I Have checked the following steps.
    1) Added notification step to the workflow between processes.
    2) Verified the email addresses of the workflow owner and the receiver of the notification.
    3) Verified that the mds.ini has the "MailServer=" setup to the right smtp.
    I have check in workflow history, it is showing notify step but not showing details of mail like send to, mail body. While in case of material repository, it was showing complete details like send to, mail body & all.
    Previously mails for customers were working fine. Kindly suggest the solution.
    Regards,
    Gaurang

    Hi Gaurang,
    Are the time parameter same for all the repositories?
    Create a dummy user and dummy workflow,and try to send mail from that workflow.
    If this works with some id then check with the Admin id which you are using.
    This way you can eliminate the possibility of id not working.Also it will tell you that user is corrupt or not.
    Check for log and traces,kindly provide with the post here.
    Thanks,
    Ravi

Maybe you are looking for