Set port/SID on new XE install?

I am installing 10g XE and want to specify the listen port to 1522 instead of 1521 and the SID to XE instead of ORCL. I have no previous database installed so the XE install proceeds and does not ask me for a port/SID value and I am 'stuck' with 1521/ORCL. How do I specify these values. I will, later, install 11g.
Thanks - Casey

On the download page for Oracle 10g XE you can also download a silent response file (iss)
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xewinsoft.html
You edit this to set the TNSPort=1522 (plus the HTTP port, sysdba password, destination path etc.)
NOTE It does not allow you to set the SID - this seems to be hardcoded as XE
then run from a command prompt
C:\mytempdir\OracleXE.exe /s /f1"C:\mytempdir\install.iss.txt" /f2"C:\mytempdir\install.log.txt"
All this is doccumented in the install guide
4.2 Performing a Silent Installation of the Server
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABBCGHA

Similar Messages

How do I set up side by side pages--like a book--in new Pages?

How do I set up side by side print view in new Pages? I need to see how it will look in book format.

You can't. Apple has removed Facing Pages along with almost 100 other features.
Pages '09 should still be in your Applications/iWork folder.
Peter

XML Publisher Desktop Db connect SQL Server Host:Port:Sid

Brand new to XML Publisher. Set up XML Publisher Enterprise environment to work with SQL Server 2005 using both MS 2000 & 2005 JDBC drivers, so far no problem.
However the XML Publisher Desktop Report Wizard will not connect to SQL Server 2005 using either MS 2000 & 2005 JDBC drivers. I provide the same data source name, user and pw that I use in the XML Publisher Enterprise environment but it is the 4th piece of information - the database portion (Host:Port:Sid) that I am having trouble with. SID is an Oracle invention not used in the SQL Server world. I have tried various combinations of the database string without sucess.
Perhaps the XML Publisher Desktop does not work with SQL Server. Does anyone know how to use XML Publisher Desktop to create templates that will work with MS SQL Server?
Thank you.
BG...

Shaun,
Thanks for you comments. I belive I now have enough to use the HSGC-ODBC technique to make the template and then re-edit it to make it work with the original JDBC connection.
That said, "Using ODBC-JDBC bridge connection is really poor in performance." I, more than anyone on the planet am aware of this issue and more.
Being new to XMLPublisher I thought that having a JDBC connection to a SQL Server from XMLP Enterprise led me to beleive that the XMLP Desktop template creation tool would also work. "*** Pity the fool ***" for thinking that! (Thank-you Mr. T!!! <grin>).
Because I had to engage a 'heterogeneous connectivity" solution to this problem indicates that the product is half-baked. That's not to say that it is not capable.
Rushing software products to market quickly creates products that make the rest of us jump through hoops. I resent that!!! I have more import things to do than waste time!
I demand more of a trusted vendor, do you? I have tortured myself with Oracle products thinking they were ready since the early nineties.
Look we are in a "heterogeneous universe" and if the product pretends to work with "heterogeneous databases" on the Enterprise side than it damn well aught to work with them on the Desktop side. That's my opinion.
Attention OTN: I am back!!!
Justin, this needs to be fixed.
Thanks!
BG...

Adobe Acrobat 9 Standard is still seeing my old scanner install. How to force it to see new scanner install.

Adobe Acrobat 9 Standard is still seeing my old scanner install. How to force it to see new scanner install? Scanner is recognized by and works fine in Windows. Acrobat however still sees Fujitsu fi-6130dj #3. I need it to see Fujitsu fi-6130dj which is what is listed in Device Manager. (Windows XP SP3).
Thank you for any suggestions.

To provide more detail and list what was done to resolve the issue but there may be a better way.
Background. When you install a USB device to a PC it is listed in Windows Device Manager as installed hardware. If you take the USB plug for any device and plug it into a different USB port on the PC the PC will install drivers again for that device. In Device Manager, if you set a system environment variable for device manager to show non-present devices you can see all of the times this may have occurred. In this specific instance there were five installations in Device Manager for one piece of hardware, a Fujitsu fi-6130 scanner. The first listing was Fujitsu fi-6130dj, then Fujitsu fi-6130dj #2, Fujitsu fi-6130dj #3 and so on. Adobe Acrobat only saw the third instance of these drivers being installed. Once I cleaned Device Manager of all Fujitsu scanner installs I was able to have a single set of drivers installed for this Fujitsu but Adobe still recognized the third instance of the driver install and I could not figure out how to force it to see what Device Manager was seeing, a single instance of the scanner being installed (with no #3 behind it).
Steps performed to try to resolve.
Repair install of Adobe - no luck - still sees the #3 instance of the scanner
Deactivation, uninstall, reboot, reinstall, reactivation of Adobe - no luck, same behavior as above
Complete removal of all scanner related software. This included the ISIS drivers in Add/Remove Programs and all other related software. This also included deleting the contents of the TWAIN_32 directory found within the root of the Windows directory and also included deleting the scanner from Device Manager.
Rebooted.
Reinstalled complete packages of both TWAIN and ISIS scanners - with the scanner disconnected. Powered the scanner back on and let Windows install the drivers for the hardware. Only at this point did Adobe see the new install of the Fujitsu scanner and no longer looked for the #3 instance of that scanner install.

New Infinity install and Philips Smart TV

Any ideas on how to resolve my connection issue. I have a Philips smart TV which until I had Infinity and the new HH3 installed on Thurs(7th Feb.) connected without any issues with my previous supplier's BB (Sky). Tv is connected and finding net ok but cant/wont connect to Smart Tv. I've enabled Port clamping as advised in other posts but still no joy. Any other suggestions appreciated. I pretty sure its not a TV issue as It worked no problems pre Infinity and TV is as up to date as you can get,Software update etc.
Thanks
Solved!
Go to Solution.

Hi,
I have the same problem with a Philips 40pfl8605 and a home hub 3 (but not the infinity package). the tv connects to the router, either wirelessly or via ethernet, but will not load Net TV. I get an error message which says 'Philips server not found. Try again later).
Keith, I'm on my home network now but you're link wouldn't open a few minutes ago. I can't work out how to message you directly on this forum, but if you can send me the content of that link on the thread, i'd be grateful. I'm pretty sure this problem stems from the router as the Net TV has connected in the past, when I've had a netgear router. Philips have been useless and after running through standard checklists such as clearing the Net TV memory, reinstalling software (which is up-to-date) etc, simply advised to send the (3yr-old) tv for repair.
Looking forward to hearing from you.

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the install fails reporting "insufficient memory".
I assume the installation requires more memory than the OS actually needs to be able to run.
I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
You need much more RAM than that.
Leopard system requirements:
http://support.apple.com/kb/SP517

Ipod Touch not recognized by USB port on my new radio! PLEASE help?!?!?

Ok, so I just bought a new radio for my car so I can listen to my ipod touch 2nd gen (with the latest 3.0 software) through my speakers. Ok, that's all great, but the problem is that when I connect my ipod touch through the USB port on my new radio, it reads "device error"...
My radio is an Alpine CDE-102. It does have an AUX input, and I can easily get a cable to fix this problem... but I'm wondering why my ipod touch doesn't show up through the USB?!?! And I don't know how AUX input sounds compared to USB input (probably less quality than the USB...)
So, can you help me? I've also connected my ipod touch to my xbox 360 and it shows up as a camera - can't play music... all part of the same problem I guess...
This is a SERIOUSLY annoying problem especially since I just dropped some cash on the new radio which might not even WORK!!! AHHHHH! A problem with the USB cable? Problem with the Ipod? Problem with the stereo? I'm not quite sure what to think...

That is the ONLY cable that will work with that radio:
http://www.alpine-usa.com/US-en/products/product.php?model=CDE-102&view=Specs
From reading the manual for your iPod I'm pretty certain the connector is on the rear of your unit.
You can connect an Auxiliary cable to the headphone out on your Touch to the AUX in on the radio but you will have to control everything with the iPod and it will not charge.
The cable is $30, why don't you ask how much they would charge you to install it?

Tried to update iPod, failed, no new drivers installed. Now iPod does not show in my computer or in iTunes.

Anyone know how I can update/unbrick this iPod? It's useless. It's stuck on the screen that says connect to iTunes. iTunes doesn't know it's there. My computer doesn't know it's there. It's not the USB port.
Please don't direct me here - http://support.apple.com/kb/HT1808 - already tried, no results.
Last time it was a missing driver for iTunes but iTunes says nothing new is needed. Help appreciated.

Let me try this again. My computer said my iPod needed an update. I clicked ok. iTunes said it was doing the update. I browsed the internet. I came back to it after it was done, and it said update failed, no new drivers installed. Now my iPod touch is a brick. I cannot use it for anything. You know that screen that shows the usb cable, a white arrow, and iTunes? It's stuck there. No amount of pushing the sleep/wake button and home button will convince it to go to any other screen. When I go to 'My Computer', it does not recognize that there is anything there. It is not the USB port. Everything was fine until the update tried and failed.
I am not installing iTunes (piece of crap software that it is) on the other computer in my apartment.
I have exhausted the articles that sort of go with the problems I am having. They all assume a non brick iPod. Mine is a brick and therefore those articles, including the one you linked, are not relevant.
Not meaning to be rude, but I came into this not caring much for Apple's business model. I've had my iPod for .. a week? Maybe two, and nothing I've seen has convinced me to feel otherwise. Apple's products are supposed to just work. I am not finding that to be the case. Anyone with anything helpful please?

TS4036 Hi, I have recently upgraded from and Iphone 4 to 5. I completed a back up on my iphone 4 via icloud which went ok. When setting up my new phone I selected to set up as a new phone and not via icloud back up. Is there anyway I can restore my det

Hi, I have recently upgraded from and Iphone 4 to 5. I completed a back up on my iphone 4 via icloud which went ok. When setting up my new phone I selected to set up as a new phone and not via icloud back up. Is there anyway I can restore my details to my new phone? Thanks Hayley

Welcome to the Apple Community.
Navigate to Settings > General > Software Update and install any updates available.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

Is there a fix for a dead ethernet port besides a new logic board?

My ethernet port went dead on my IMac. I unplugged the ethernet cable and plugged it into my laptop and it worked instantly. I am still able to connect wirelessly. I bought an apple USB to Ethernet converter and plugged it in. It worked for about 3 days and then it went dead. Once again I was able to unplug the ethernet cable, plug it into my laptop and instantly had a connection. Is there a fix for a dead ethernet port besides a new logic board and if not how do I figure out which logic board I need?
Thanks
Step

This problem baffled me. I kept getting the "ethernet cable unplugged" error after testing my cables good. Was abut to write it off as port gone bad when I found this thread.
The YouTube video reference above fixed my problem. (http://www.youtube.com/watch?v=u1P6X87qArs)
Basically go to SETTINGS/NETWORK. Then highlight your ETHERNET port and click the ADVANCED button. From there click the HARDWARE tab.
Set
CONFIGURE to MANUALLY
SPEED to whatever your ethernet speed is, in my case 1000baseT
DUPLEX - FULL DUPLEX, FLOW CONTROL
Leave MTU at Standard
Hit OK.
Then don't forget to hit APPLY. I didn't do this the first couple of times assuming hitting OK applied these settings. You gotta hit APPLY.
In about two seconds, my Ethernet connected again.
I went back and reset it to AUTOMATIC just to test and after doing so got the cable unplugged error again. So I am leaving it on manual and it's working.

Best practice for a new wordpress install / dreamweaver

One thing that is being shown in the demo video's. A pre created wordpress document, I wish, they started to show with a new wordpress install / setting up the server etc.
What are the best practices with using a service which has a one button wordpress install. Install wordpress with one button install on web hosting servers?
Is there a way to sync with your site that you can work on the live server? I noticed everytime i seem to add my server it will connect but never sync with a new site / server. Test Connection Link's though.
Am I going to be forced to install / purchase mamp to more easily create install's of wordpress?
Is there anyway to Sync, a new site folder on a local machine with an existing ftp site?

What are the best practices with using a service which has a one button wordpress install. Install wordpress with one button install on web hosting servers?
I have such a service (installatron) running on the webserver of my hosting comapny and I like it a lot. It installs the latest version, is incredibily fast ( a few seconds for the complete install, really), handles the database settings for you (it creates a database on your server, a database user and password) and it even handles the safety settings correctly (like setting sufficiently secure "secret keys" and passwords etc). Remember to print out the mail you receive with the passwords and database settings and keep it in a safe place. Not all services are as good as this one though, so check that out first. (or later, you can always do a re-install later) Also check if the Wordpress install is the latest version.
Is there a way to sync with your site that you can work on the live server? I noticed everytime i seem to add my server it will connect but never sync with a new site / server. Test Connection Link's though.
Yes, you can work on a live server if you set up your site correctly from the Site/new site or Site/manage site menu in Dreamweaver.
You can also GET the remote site and keep it on your own computer, but you won't see anything happening if you make changes since Wordpress needs to run on a webserver running PHP and MySQL. You can also work locally and upload the changed files to your remote server using PUT from the Files window. You can even do this automaticaly by checking "automatically upload files to server on save" from the advanced/remote info tab in the Site Definition window.
Am I going to be forced to install / purchase mamp to more easily create install's of wordpress?
If you want to run Wordpress on your own machine, for development and testing purposes you will need to run mamp or wamp so Wordpress can run.
If you want to run Wordpress on a webserver you won't need it. Dreamweaver or an FTP program and a texteditor is all you need.
Firefox and the webdeveloper plug-in (of Firebug) is also very handy, check that out.

New Line Installed - Promised 10MB on getting 4MB

I had a brand new line installed two weeks ago and in the order was promised 8-10mb, on a wired connection the max I can get in 4mb but normally lower even when only hub is connected on the line (still with filter provided by BT).
Here's my home hub stats.
Please help?
1. Product Name: HomeHub42. Serial number: 3. Firmware version: v0.07.00.1729-BT (Type B) Last updated [Unknown]4. Board version: 01A5. DSL uptime: 1 days, 06:11:256. Data Rate: 448 / 81287. Maximum Data Rate: 1304 / 90408. Noise Margin: 29.0 / 9.39. Line Attenuation: 9.5 / 12.010. Signal Attenuation: 0.0 / 12.011. Data sent/received: 67.5 MB / 602.9 MB12. Broadband username: [email protected] BT Wi-fi: No14. 2.4GHz wireless network/SSID: 15. 2.4GHz wireless connections: Enabled (802.11 b/g/n (up to 144 Mb/s))16. 2.4GHz wireless security: WPA & WPA2 (Recommended)17. 2.4GHz wireless channel: Automatic (Smart Wireless)18. 5GHz wireless network/SSID: BTHub4-Z3QN19. 5GHz wireless connections: Enabled (802.11 n (up to 300 Mb/s))20. 5GHz wireless security: WPA2 Only21. 5GHz wireless channel: Automatic (Smart Wireless)22. Firewall: Default23. MAC Address: 24. VPI/VCI: 0/3825. Modulation: G.992.1(DMT)26. Latency type: Fast27. Software variant: -28. Boot loader: 0.4.3-BT (Mon Jun 9 14:23:56 2014)

I have reformatted your stats to make it easier to read
1. Product Name: HomeHub4
2. Serial number:
3. Firmware version: v0.07.00.1729-BT (Type B) Last updated [Unknown]
4. Board version: 01A
5. DSL uptime: 1 days, 06:11:25
6. Data Rate: 448 / 8128
7. Maximum Data Rate: 1304 / 9040
8. Noise Margin: 29.0 / 9.3
9. Line Attenuation: 9.5 / 12.0
10. Signal Attenuation: 0.0 / 12.0
11. Data sent/received: 67.5 MB / 602.9 MB
12. Broadband username: [email protected]
13. BT Wi-fi: No
14. 2.4GHz wireless network/SSID:
15. 2.4GHz wireless connections: Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4GHz wireless security: WPA & WPA2 (Recommended)
17. 2.4GHz wireless channel: Automatic (Smart Wireless)
18. 5GHz wireless network/SSID: BTHub4-Z3QN
19. 5GHz wireless connections: Enabled (802.11 n (up to 300 Mb/s))
20. 5GHz wireless security: WPA2 Only
21. 5GHz wireless channel: Automatic (Smart Wireless)
22. Firewall: Default
23. MAC Address:
24. VPI/VCI: 0/38
25. Modulation: G.992.1(DMT)
26. Latency type: Fast
27. Software variant: -
28. Boot loader: 0.4.3-BT (Mon Jun 9 14:23:56 2014)
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

My hard drive recently crashed and I had a new one installed and upgraded to Yosemite since then I have not been able to get on my banks website to do online banking. Any suggestions on how to get back on there?

My hard drive recently crashed and I had to have a new one installed, at the same time I upgraded to Yosemite since then I have not been able to get on my banks website to do any online banking. I just get a blank page after I log onto the bank. Any suggestions on how to fix this?

Using Safari? Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items. Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.
Try another browser as a test.
Firefox

Problems trying to migrating ports to a new Vlan using an externar DHCP server

Hello, here is the thing. I have the following configuration in my Core Switch:
interface Vlan1
ip address 10.24.74.1 255.255.254.0 secondary
ip address 192.0.2.54 255.255.255.0
ip helper-address 10.24.86.22
no ip redirects
As you see, we are using an external DHCP server for the Vlan1 and it is working:
Internet 192.0.2.98 0 3c97.0e23.3d8d ARPA Vlan1
Internet 192.0.2.194 0 e89a.8f77.36a0 ARPA Vlan1
Internet 192.0.2.195 0 e89a.8f77.01ab ARPA Vlan1
Internet 192.0.2.198 2 001c.25de.acaa ARPA Vlan1
Internet 192.0.2.199 0 d8eb.97a6.30a4 ARPA Vlan1
Internet 192.0.2.196 0 f0de.f1f1.1e06 ARPA Vlan1
Internet 192.0.2.203 0 e89a.8f77.016f ARPA Vlan1
Internet 192.0.2.207 4 d0c7.89d6.3ba3 ARPA Vlan1
Internet 192.0.2.211 0 4437.e636.7ef7 ARPA Vlan1
But, when a try to migrate this port to a new Vlan (Vlan50), I got the following issue:
001290: Jul 23 08:27:44.705 GMT: DHCPD: DHCPREQUEST received from client 013c.970e.233d.8d.
001291: Jul 23 08:27:44.705 GMT: DHCPD: client has moved to a new subnet.
001292: Jul 23 08:27:44.705 GMT: DHCPD: Sending DHCPNAK to client 013c.970e.233d.8d.
001293: Jul 23 08:27:44.705 GMT: DHCPD: broadcasting BOOTREPLY to client 3c97.0e23.3d8d.
001294: Jul 23 08:27:44.725 GMT: dhcp_snooping_get_ingress_port: Interface src_index 0xF
001295: Jul 23 08:27:44.725 GMT: DHCPD: DHCPDISCOVER received from client 013c.970e.233d.8d on interface Vlan50.
001296: Jul 23 08:27:44.725 GMT: DHCPD: there is no address pool for 10.24.76.1.
001297: Jul 23 08:27:44.725 GMT: DHCPD: setting giaddr to 10.24.76.1.
001298: Jul 23 08:27:44.725 GMT: DHCPD: BOOTREQUEST from 013c.970e.233d.8d forwarded to 10.24.86.21.
Any suggestions,
Thank you in advance,

Just to help someone who has the same issue.
I found this on the web site:
When the server receives a DHCPREQUEST from a client in the RENEWING (or REBINDING) state, it normally grants the renewal only if the client has an unexpired lease with this server. Otherwise the server ignores the request; the server to which the client is bound should answer the client. (The only exception is normally that if a server is sure the IP address the client is asking for is inappropriate for the client, the server will send a DHCPNAK, which forces the client back to the INIT state.)
Thank you anyway

Cannot get rEFInd to boot new Linux install

I am trying to setup a fresh install of Arch on a new SSD on my 2007 MacBook 2.1. This particular MacBook has a 32 bit EFI system, but everything else is 64 bit. The wiki article has some information for installing on this particular MacBook, but the instructions aren't super thorough.
This MacBook is already running Arch on an old HDD and is booting with grub. I remember that setting this up originally was a huge pain and I ended up installing arch onto the drive through another laptop (a Dell) with similar architecture and transferring the drive over once done. Unfortunately, I no longer have access to this other machine.
In order to get started with installing to the new drive, I decided to use the arch-install-scripts from within my working installation to install Arch to the SSD connected through a SATA-USB adapter. The installation of Arch went fine and I can chroot to it no problem.
Installing the bootloader has been the hard part. I have managed to get the computer to load rEFInd off the SSD if I set it up just right (installed as EFI/BOOT/bootia32.efi), and rEFInd can even detect and boot my old grub install from the HDD (as long as the HDD is internal and the SSD is attached over USB). Unfortunately, I cannot for the life of me get rEFInd to boot into the new Arch install on the SSD. I have tried placing the vmlinuz and init images in various locations to help with auto detection, and I have tried various combinations of manual configuration in refind.conf, but nothing seems to get me anywhere. The manual configurations just get me "Error: Not Found While Loading vmllinuz-linux" and the auto configuration only ever finds my old install.
I'm happy to post any configuration files here that are useful, but I'm not sure what people would want to see.
The SSD is setup as gpt with a fat32 ESP set to mount to /boot/efi, an ext4 partition set to mount to /, and a swap partition at the end.

So, refind basically works/is started by the mb's firmware?
Please post your refind.conf (without all the comments, no manual stanzas!)
Also, to simplify things, I'm now assuming the ssd is the only internal drive installed, your old install/hdd is disconneted.
Use the arch-install cd , refind should detect it and allow you to boot, once the installer-system is up and running, please provide ouptut from lsblk.
Also, mount both partitons , and show what files are where ls -l YOURROOTPART/boot and ls -l YOURESPPART/ just to get a better overview.

Set port/SID on new XE install?

Similar Messages

Maybe you are looking for