Set priority view of designated application?

How would one set an application, whether assigned or deisgnated, that it's GUI is the top layer, meaning you see it without any spacial compromise, even if it's not the active-application?
Thanks.

zaydek wrote:
The less extenstion to Apple design, and development, I understand, is the safest. So I agree with you there. But I mean to ask a more of a technological idea that I know exists in the Apple-design.
That needs to be set by the developer. It could be programmed into the preferences, there aren't any for QuickTime Player. Have you looked into other video players, like VLC* or MPlayerX?
In an OS long ago, you used to be able to go in and change the windows to act that way, but I imagine messing with that these days would disable the app due to code signing.
*Edit: I just checked VLC. I has an option to "Float On Top."

Similar Messages

How to set priority?

Hello,
Is there a way to set a priority symbol or number or anything of the sort beside a message in mail?
I heard of it being done but I'm not sure.
Also, how do I use mail and create an out of office reply or an email that will be automatically sent when someone sends an email to a given address?
Thanks.
Dorian

You mean when sending a mail, how do you set priority? Is there a little rectangular box in the lower left-hand corner region of the message header area in your new message window composition window, that has three little horizontal lines and a downward pointing triangle in it? Click on it and select Customize....
Check the far-right checkbox that has a pull-down menu with a "!" in it. That is message priority. "!!" means high priority, "!" means regular priority, and "-" means low priority.
Or do you mean how do you display the priority of incoming mail? You can display priority of incoming messages by enabling the "Flag" column in your message list viewer pane. In the Mail's menubar, go to Mail > View > Columns and select Flags. You can drag that column to the desired position (mine is 2nd from left) and adjust its width in the column title row using your mouse. If you have placed the Flag icon in the toolbar of the main mail viewer window, then when you click on the icon, you can locally "flag" it (displays a little red flag in that column next to the message) to remind you that you have to do something with/about this message. To add the Flag button to your toolbar, in Mail's menubar, click on Mail > View > Customize Toolbar and drag the Flag icon into your toolbar.
The best way I would know to create an out-of-office reply would be to create a temporary rule that says "if account is 'whatever' then reply" and enter text in the reply text window. Problem is, I don't know whether the rule would be executed until after the message was downloaded in your running mail application, or until the message was actually viewed. You'd have to experiment. If your computer is going to be shutdown or you will be logged out, that won't work, and you'd really need to be able to do something at the mail server level, not your mail client level.
(if you find that this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the "helpful" or "solved" buttons in the header of this post)

How to set up FSCM 9.0 Application for Customers to use ?

Folks,
Hello. I have just installed FSCM 9.0 ( all of its modules) and run the application in Browser successfully. The Database is a clean System Database without any Demo data (Production Database).
In order for Customers to type in their data into the application, we need to set up CharFiled, SpeedType, SetID, common data in Controls Tables in the Database. In Menu, there is "Setup Financial/Supply Chain", and under PeopleTools, there is "Setup Manager". But I don't understand where to start to set up the application FSCM 9.0 application.
Do any folks understand the procedure to set up FSCM 9.0 application for Customers to use step by step ?
Thanks.

Folks,
Hello. Thanks a lot for replying.
I have installed FSCM 9.0 all of 50 modules. I just want to implement General Ledger module. Thus, I create a project named "General Ledger" in Setup Manager under PeopleTools as follows:
PeopleTools -> Setup Manager -> Manage Implementation Project -> Create New Project by Product -> select "General Ledger" ->View Summary -> Save -> Type in "General Ledger" in Project Name Box -> Click ok -> click "generate setup tasks" -> click "setup task generation status"
It has been for a long time, I still see "Run Status" is always "Queued". The button "View Setup Task" does not become clear. This means the process is not completed.
Do we need to configure Process Scheduler at first before run Setup Manager ? If yes, how to configure Process Scheduler for Setup Manager to generate a list of setup tasks of a project ?
Thanks.

How to set the view, which has to be shown at runtime?

Hi,
in my application i have more than one view, but at runtime only one of these views has to be shown. I want to decide this via a parameter that I get from the url.
How can i set the right view to be showing at runtime?
I tried it with a StartView which fires the right Outbound Plug in his wdDoInit-Method. This is working fine, but the problem is, that the method OnPlugDefault() of ComponentInterfaceViewController isn't called already at this time. So in the Init-Method of the StartView I don't have the given URL Parameter, so I can't decide which Plug I want to fire. The method OnPlugDefault() is called only after the init-method of the StartView.
Is there any other possibilty to set the view, which has to be shown, at runtime?
Thanks and Best Regards
Katharina

Hi,
One way is you can pass the parameter in the URL , read the parameter and then fire the outbound plug depending upon that.
You can read the parameters as follows
HttpServletRequest request =Task.getCurrentTask()
.getWebContextAdapter()
.getHttpServletRequest();
String[] param1 = request.getParameterValues("<<PARAMETRNAME");
if(param1.equals("VALUE"))
fire outbound plug1;
Regards, Anilkumar

E2000 setting priority is not working for one PC

my home has a max download speed of 300 KB/s. which can make gaming quite an issue if someone in the house starts using something that is a bit of a drain on the bandwidth.
i fixed the issue for a few months by setting the gaming console to be the only device with high priority. but for some reason my sisters hp laptop still drains all the bandwidth shen he loads youtube. and the only way to stop it is a mac address block on that computer so the game isnt literally frozen still.
i need to figure out how to get the priority working against this device.

In this section, you can set the bandwidth priority for a variety of applications and devices. There are four levels priority: High, Medium, Normal, or Low. When you set priority, do not set all applications to High, because this will defeat the purpose of allocating the available bandwidth. If you want to select below normal bandwidth, select Low. Depending on the application, a few attempts may be needed to set the appropriate bandwidth priority.
To Enable QoS service on your router you can follow this link and follow the steps on the website: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=05ef4bac579a47d39d9454a4b0583cbf_1701.xml&pid=80&r...
Second, let me know the current firmware version in the router management page: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=df680dece5cd4f7ea8141ea0026db71a_4046.xml&pid=80&r...

Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals

Display for graphic design application

Hi every body,
Today i'm going searching my new iMac 20" Dual Core and i want to know if you think the 20" display is a good stuff to make graphic design application.
We work now on 19" ViewSonic CRT flat screen.
Thanks all.
Excuse my english, i'm a french canadian...

Bonjour Wayne99,
I use my iMac for Photoshop and Illustrator all the time, and the 20" monitor is PERFECT!
My only beef with it is the color setting, I changed mine to Adobe RGB 1998, because the default 'iMac color' setting is way too...bright/faded looking.

Help in finding view corresponding to application

hi,
i have an application for web dynpro component and there is a view corresponding to that application.
i am not able to find out that view. where is that view. and which component is it attached to. any help.
i have to make some changes in that view.
web dynpro application is HAP_START_PAGE_POWL_UI_ESS
configuration name is HAP_START_PG_POW_ESS_AC
how can i find the view corresponding to these application adn configuration?

>It has POWL in the name, so I'm guessing this is a POWL appliation.
good guess Thomas! But only half right - The actual app is an FPM OIF which has a component that itself embeds a POWL (HAP_START_PAGE_POWL_UI ). This one POWL and the corresponding MSS one are probably the two most posted POWLs on SCN. I guess there there are a fair few companies out there now implementing the EhP4 version of performance management.
The feeder class used by this is CL_HRHAP00_STARTPG_POWL and the application Id for the POWL is OSA-POWL-ESS (you'll see some if statements that query this value (noticeably not defined as a constant anywhere!)
The MSS view uses the same feeder class - but a different application id.
Like the previous BSP based app, there isn't much in the way of explicit enhancement points for the ESS application. You can enhance the feeder class, but it certainly hasn't been designed to make this easy.
I'd suggest that first you read up on POWL, and think about how you could implement you changes to the view by enhancing the feeder class (or potentially just through administrator configuration/personalisation of the application) try out a few things, and then if you get stuck come back and ask again - explaining what you've tried and what it is you want to achieve.
Cheers,
Chris

Can we set List View Lookup Threshold at site collection level ?

Hello,
Presently, we have requirement to set the List View Lookup Threshold at Site Collection/Sub-Site level instead of web application level.
Could you please let me know, are there any ways to set
List View Lookup Threshold setting at Site Collection/Sub-Site level
in SharePoint 2010 using Powershell/Object Model
Also, it would be helpful if you colud let me know, upto what extent , we can drill down List View Lookup Threshold setting i.e. SubSite/List/Library-Folder.
Thanks in advance !
Regards,
Sagar Acharya
Email - [email protected]

Hi Sagar,
We cannot set list view threshold value at sitecollection/subsite level. It can only be set at web application level.
However we can bypass the 5000 limit using PowerShell command by setting “Enable Throttling”= false for particular list.
Reference link:
http://pravahaminfo.blogspot.in/2012/10/how-to-increase-list-view-threshold.html
Thanks,
Somnath Matere

Set max fetch size on application module

Is there a way to set max fetch size on application module level, rather then setting it for every view object separately? I don't want to allow any of my view objects in application module to fetch more then 1000 rows.

Hi,
Tools-->... contains option for setting rows in batches of... , but doesn't contain option for setting max fetch size. I guess I'll have to do it in implementation class for view objects... Thanks anyway
Dragana

Error while navigating to a View in one Application from another Applicatn

My Application has a set of views and in one view lets say View A there is a link while clicking on the link it triggers a outbound plug and a new view gets opened.There is another application which calls the View A of my application (when a navigation link tab is clicked) not by embedding my view instead calls the url of my application.Here when i try to click on the link from View A i get an error stating "Cannot navigate via outbound plug navigation link missing."

Hi,
I suppose you have not created the navigational link.
If not then right-click on your outbound plug and click on Create Navigation link to the new view from your viewA.
thanks & regards,
Manoj

Setting intial view

Is it possible to script or command the parameters of the view/display settings in the user's reader?
Specifically, I want set:
the view resolution in Page Display options;
the background colour in Full Screen Appearance options;
the "Fill" Screen option in Full Screen Setup options i.e. I don't want the document to fill the screen in Full Screen mode.
I don't see this control as being a security issue, but then I've been surprised before. Is there a method for this?
Thanks in advance.
SB

Steve,
In short, no.
In Preferences / Full Screen / Full Screen Setup there is the option to select 'Fill screen one page at a time' . If you uncheck this option then the document appears at the size you dictate rather than filling up the screen. The advantage (from a design point of view) is clear. However, one is then left with the issue of controlling the background colour of the user's reader, and the issue of resolution (i.e. system or custom setting) as set in Preferences / Page Display / Resolution.
All these preferences are set by the reader, not the author i.e. I can't control the readers preferences so I can't present the deisgn as intended. Given the average user's undertsanding of Acrobat preferences (nearly no knowledge at all) I can't rely on the users willingness or ability to set the preferences as required.
I may be barking up the wrong tree here but I need some guidance on how to acheive this.
Many thanks
SB

Set two views in one portal page

Hello all,
I need to set two views in one portal page, or tow deferent views have to be setted in one view, unfortunately i didn't find anythings in SAP forums about this subject
please help me to reso

Are you saying you have two separate WD Applications (both FPM) which you want to run as two iViews in the same Portal Page? If so, this is a very basic NetWeaver Portal capability - to add more than one iView to a Page. However this isn't the correct forum to discuss this, as that discussion would belong in the NetWeaver Portal Forum.
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/47/881b2a67731e1ee10000000a42189d/frameset.htm

Model View Controller design question

Hi,
I am creating a brand new web application, and would like to use the Model View Controller design (using Beans, JSP, and Servlets).
I am looking design suggestions for handling page forwarding. I don't want to post to a jsp, and I don't want to hard code the name of the next jsp on the forward or in the servlet. I was thinking of having a properties or xml file, which lays out the routing read by the servlet and then dispatched.
Does anyone have any other design suggestions on the best way to handle routing someone through a web application?

What you can do is create a servlet that initializes the mappings on startup...create a hashtable of mappings from a file. You'll have to parse the file, so you can either use XML and use a SAX parser, or your own format (name=path? ie. order=/order.jsp), which ever one is simpler for you to use.
To load the servlet on startup, you specify the load-on-startup parameter in the web descriptor, web.xml:
<servlet>
     <servlet-name>MappingsLoader</servlet-name>
     <servlet-class>packagename.MappingsLoader</servlet-class>
     <load-on-startup>1</load-on-startup>
</servlet>
where load-on-startup number is the order in which it loads the servlet, 1 being first.
Then once you've created the hashtable, store it in servlet context.
When you want to forward something, just use a requestdispatcher object and the hashresult to forward the request to another web component (in this case, a jsp).

Setting priority for WL Triggers

Hi,
We are developing a huge application using WL 5.1 and JDK 1.2.2. We have 5-6
Weblogic Scheduled Triggers that are running at different time.
The rest of the application almost comes to halt or slows down when the
triggers are scheduled. Is there a way to set priority for the those
Triggers? Like can i say in weblogic that run triggers in low priority? If
so, how?
Thanks for the help in advance.
regards,
Prabhakar Babu

At the current time, no.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Prabhakar Babu" <[email protected]> wrote in message
news:39b7f8a8$[email protected]..
Hi,
We are developing a huge application using WL 5.1 and JDK 1.2.2. We have5-6
Weblogic Scheduled Triggers that are running at different time.
The rest of the application almost comes to halt or slows down when the
triggers are scheduled. Is there a way to set priority for the those
Triggers? Like can i say in weblogic that run triggers in low priority? If
so, how?
Thanks for the help in advance.
regards,
Prabhakar Babu

Set priority view of designated application?

Similar Messages

Maybe you are looking for