Set Redirection URL in Authorization

I have written a custom Authorization Plug-In which at the end, either return authorization denied or successful.
I was wondering how can I set a redirection URL when I return Authorization failed?
Basically I want to return the user the the login form if they are not Authorized. I can't simply set it in the Authorization Failure Rule in the policy because it doesn't seem to work when i execute my own plugin.
Any ideas?
Thanks,
Raj

Are you not getting the authorization failure back to your policy or its not redirecting ? When you set the authorization denied in plugin and return , the authorization rule that called the Plugin will fire the failure part of the rule. But this wont redirect back to the login page because login page will think the user is already authentication ( because of valid obssocookie). You can try redirecting to another accessdenied page.
Thanks
Ram

Similar Messages

Authorization Failure Redirect URL in OAM

Hi,
From OAM policies i want to redirect a user to Authorization Failure page by configuring redirect URL for Authorization Failure. But user is always redirected to OAM operation error page (with an error message that URL .. has been denied for the user) in case of Authorization Failure..How to redirect the user to my AuthFail.html page ? I am able to redirect the user to AuthenticationFailure page incase of authentication failure..but not able to redirect in case of authorization failure..how to achieve this?
Thanks & Regards,
Srikanth

Hi,
I am new to OAM and facing the same error in Authz Rule. Did your issue get resolved?
When I tested the URL with access tester for authz failure scenario, I got Authorized Inconclusive.
I do understand if I mention the AuthFail.html in the redirection URL Authz Inconclusive, the user would be able to see the appropriate error page. But I wanted to understand the reason for authz getting into inconclusive condition. Can someone provide me clarity on this?
Thanks!

I have a cisco ironport c170, i want set up URL redirect? But i don't khow how to ? Can you help me?

I have a cisco ironport c170, i want set up URL redirect? But i don't khow how to ? Can you help me?

The C170 does not support URL redirection prior to OS release 8.5. What exactly do you need to accomplish?

ISE 1.2 CWA Redirect URL

Hi,
Just wondered was there anyway to manipulate what webauth URL is sent to a client in the redirect string. Currently my ISE sends clients the internal machine name, I was wondering if there was anyway I can change this.
I know on local webauth on the WLC you can set external URL's, does this feature exist in the ISE?
TIA
-G
Sent from Cisco Technical Support iPad App

Users Are Not Appropriately Redirected to URL
Symptoms or Issue
Administrator   receives one or more "Bad URL" error messages from Cisco ISE.
Conditions
This   scenario applies to 802.1X authentication as well as guest access sessions.
Click   the magnifying glass icon in Authentications to launch the Authentication   Details. The authentication report should have the redirect URL in the RADIUS   response section as well as the session event section (which displays the   switch syslog messages).
Possible   Causes
Redirection   URL is entered incorrectly with invalid syntax or a missing path component.
Resolution
Verify   that the redirection URL specified in Cisco ISE via Cisco-av pair "URL   Redirect" is correct per the following options:
•CWA   Redirection URL:   https://ip:8443/guestportal/gateway?sessionId=SessionIdValue&action=cwa
•802.1X   Redirection URL:   url-redirect=https://ip:8443/guestportal/gateway?sessionId=SessionIdValue&action=cpp

Web Auth Type: Customized(downloaded) Redirect URL after login not working.

         5508WLC as anchor controller with WLC1 and WLC2 with WCS. I have 2 public ssids set up to go directly to the internet.
Everything is working as it should. I downloaded the web auth bundle from Cisco and will just use a disclaimer page and then if the user clicks on the accept button they will be redirected to our company web page, and then they can get out to the internet.
I have edited the aup.html and login.html to say what I want it to. I have 2 different login.html pages and bundle to a .tar file like the documentation says. I download it via tftp to the controller and it is successful. The disclaimer page opens up when I connect and it looks as it should. The problem is I cannot seem to get the accept button to work. It redirects to a web page but it is undefined.
   I must be missing some setting somewhere, but I just can not seem to find it. Is there any line I need to edit in the login.html files that will redirect the page.    The config on the Web Login Page Redirect URL after login is http://www.mccg.org which is our home page.
Any help will be appreciated. I cannot seem to fine very good documentation, or I am just overlooking something.
Thanks
John

Your HTML code is wrong. Attach your code if your okay with it and I can check.
Sent from Cisco Technical Support iPhone App

How to set different urls for logoff button for different user groups

HI All,
We have two different set of users in our company .when one user group clicks on the logoff button in masthead we want to redirect them to for example www.google.com and for the other group we want to redirect to www.gmail.com.
How can we acheive this particular requirement
Thanks
Bala Duvvuri

hi bala,
For the two user groups maintain two different desktops, two/same themes and frame work.change the headeriview jsp in masthead par file to Google and save it as masthead1 and another one with gmail as masthead2 then create iviews with that par file and assign them to different groups and make invisible the default masthead iview.then the users get the logoff based on group you can get some wikis on changing log off or redirecting log off, check these threads
Portal logoff : Redirection or Close the Entire Window
Portal Logoff redirection URL
Regards
Mahesh

Form Based Authentication Redirect URL

I'm using form based authentication in standalone OC4J 10.1.3.1. I have set the system property oc4j.formauth.redirect to true to force OC4J to redirect using 302 any successful authentication to j_security_check.
The problem is that the redirect URL loses any query parameters. Here's the raw HTTP being posted:
POST http://localhost:8988/manage/j_security_check HTTP/1.1
Host: mvakoc-pc.peoplesoft.com:8099
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1
Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: http://mvakoc-pc.peoplesoft.com:8099/manage/target?instanceName=denlcmlx1_entserver_1&targetType=entserver
Cookie: JSESSIONID=0a8b7ff6231c049914997fdb4ebb93b4854b0956862b; SignOnDefault=18438; e1AppState=
Content-Type: application/x-www-form-urlencoded
Content-Length: 62
X-Forwarded-For: 10.139.127.246
j_username=username&j_password=password&url=%2Fmanage%2Fhome
However the response back drops off the query parameters:
HTTP/1.1 302 Moved Temporarily
Date: Fri, 05 Jan 2007 21:59:22 GMT
Server: Oracle Containers for J2EE
Content-Length: 231
Connection: Keep-Alive
Keep-Alive: timeout=15, max=100
Location: http://mvakoc-pc.peoplesoft.com:8099/manage/target
<HTML><HEAD><TITLE>Redirect to http://mvakoc-pc.peoplesoft.com:8099/manage/target</TITLE></HEAD><BODY>http://mvakoc-pc.peoplesoft.com:8099/manage/target</BODY></HTML>
Any workaround?

It does not appear to be quite the same issue. That bug indicates that everything works fine in a standalone OC4J environment. This would be true with the use case specified as the original URL (/em/console/ias) does not include any query parameters. In my case the original URL contains query parameters so the ultimate redirected URL should also contain those.

Portal Logoff redirection URL

Hi,
I want to redirect the URL to another page from the default log on page when the user logs off. I know we can change it in ume.logoff.redirect.url and give the desired URL. But the problem is we have two different sites and each sites should return to different screens once the logoff is clicked. So the URL cannot be maintained in this property. We have two mastheads for both this sites.
I tried to figure it out in the code. The URL to be mentioned is present in logOutComponent which is part of the jar file which comes with masthead. I cant change the desired URL in that component. Where can i change the URL to get the desired result?
Regards,
p188071

Hi <name>,
I decompiled the "logOutComponent" .class and it containts the following code:
// Decompiled by DJ v3.6.6.79 Copyright 2004 Atanas Neshkov Date: 19-1-2008 18:04:06
// Home Page : http://members.fortunecity.com/neshkov/dj.html - Check often for new version!
// Decompiler options: packimports(3)
// Source File Name:   LogOutComponent.java
package com.sapportals.portal.navigation;
import com.sap.security.api.UMFactory;
import com.sap.security.api.util.IUMParameters;
import com.sapportals.portal.prt.component.*;
import com.sapportals.portal.prt.pom.IEvent;
import com.sapportals.portal.prt.runtime.IPortalRuntimeResources;
import com.sapportals.portal.prt.runtime.PortalRuntime;
// Referenced classes of package com.sapportals.portal.navigation:
//            INavigationGenerator
public class LogOutComponent extends AbstractPortalComponent
    public LogOutComponent()
    public void doOnNodeReady(IPortalComponentRequest request, IEvent event)
        String externalUrl = UMFactory.getProperties().get("ume.logoff.redirect.url");
        boolean silent = UMFactory.getProperties().getBoolean("ume.logoff.redirect.silent", false);
        if(externalUrl != null && !externalUrl.equals("") && !silent)
            request.redirect(externalUrl);
        } else
            INavigationGenerator navigationService = (INavigationGenerator)PortalRuntime.getRuntimeResources().getService("com.sap.portal.navigation.service.navigation");
            String URL = navigationService.getPortalURL(request, null);
            request.redirect(URL);
    public void doContent(IPortalComponentRequest iportalcomponentrequest, IPortalComponentResponse iportalcomponentresponse)
As you can see this module just gets the property "ume.logoff.redirect.url", does an adittional check and then gives back this url..
Not that fancy..
My suggestion to you would be to edit the portalapp.xml, look for the component "default" and extend it with an additional component property called "MyCustomLogOffURL" for example. To do this just copy the allready excisting "Help URL" property and rename.
Example:
<property name="MyCustomLogOffURL" value="http://yourloggofurlforthismasthead.com">
<property name="plainDescription" value="My Custom Logoff URL" />
<property name="category" value="Navigation" />
</property>
Adding this property here makes you set it seperately for both the masterheads you use, because you can just set it in the Property editor of the PCD
In addition you now need to modify the "HeaderiView.jsp" a bit to use your custom parameter instead of the "logOutComponent".
To do that add the following initialisation at the beging of the jsp file:
final String MY_CUSTOM_LOG_OFF_URL = "MyCustomLogOffURL";
....and change the function GetLogoffURL so that it will look like this:
private String GetLogoffURL(IPortalComponentRequest request)
     String value = (String)request.getNode().getValue(MY_CUSTOM_LOG_OFF_URL);
     return value;
<h3>PLEASE TAKE NOTICE OF THE FOLLOWING</h3>
<h5>Never change the SAP component always create a copy and rename it to your own namespace!!!</h5>
Good Luck,
Benjamin Houttuin

WebAuth Redirect URL Duplication

Hello
I have WLC2106 with sw 4.2.205.0 and have enabled webauth, such that any users first attempt to connect to the internet will be intercepted as expected.
This works fine if going direct to a link with NO proxy, and it works fine if adding ":8080" to the end of the url as well.
I have the following problem though if I specify a proxy server in my IE settings (IE7).
I go to open a web page
http://192.168.1.1
get redirectected to
https://10.1.1.1 of the WLC, correctly so, however, the actual URL appears like this:
https://10.1.1.1/login.html?redirect=192.168.1.1http://192.168.1.1
so, once authenticated, which works fine, the redirect will try to pass the user to the website
http://192.168.1.1http//192.168.1.1 (note the obvious duplicate in the address, but also the missing : in the second url)
This does not happen when the proxy server setting is turned off and I have put the WLC virtual address in the proxy bypass list.
I have also tried both with and without an address in the "Redirect URL after Login" text box.
Has anyone experienced this, or, does anyone have any idea what it might be?
Thanks in advance
Anthony

So the portal woks, but the user goes to their page on their iPhone. Have you tried to add the redirect in the HTML code instead? I have not had problems the way you have it setup on the wlc. On the iPhone are you using the browser to log in or are you joining the SSID and letting the iPhone pop up the login.
Thanks,
Scott Fella
Sent from my iPhone

Ume.logoff.redirect.url

Hi All,
I'm trying to use the ume.logoff.redirect.url parameter to redirect the Portal to a predifined destination. However, it doesnt work, the Portal just redirects to the opening page. I've also set the ume.logoff.redirect.silent parameter to false.
I was hoping that someone would be able to post an example of the correct way to input a value for this parameter, as i've tried many different forms, and none of them seem to work.
I'm developing in EP6.40, sp12.
Thanks in advance
Rav

Hi Robert,
Sorry, you misunderstood my post, my fault.
I've tried the url before, at an earlier date, and it didnt work.
I was asking you if the url that I posted was in the correct form, because, if it is, then I have to try something else, as it doesnt work.
I always restart the server everytime I've made changes.
Cheers
Rav
Message was edited by: Ravinder Sokhi

5.3-SP12 CUP-SMTP Server-Redirection URL

Hi experts,
I've configured the SMTP server by setting the Applicattion URL : Configuration>Workflow>SMTP Server, but there is another field: Redirection URL that I have not full-filled.
Which is the functionality of setting the redirection URL at the SMTP Server?
Many thanks!

It's two different URLs:
- you will need the SMTP server (which is not a URL but a host name, i.e. "mail.yourcompany.com")
- you do not need the redirect URL if you don't do SSO
Frank.

How to redirect URL?

Our lab uses Xserve to host our web pages. We want to redirect URLs (without showing real web folder details) when users surf on our web site. For example:
Our web site host name: www.labname.edu
We want that users only see "www.labname.edu" on the browsers, instead of showing "www.labname.edu/folder1/subfolder1/.../filename1.html" or "www.labname.edu/folder2/subfolder2/.../filename2.html"...etc.
I am a new bee for Xserve and do not know how to resolve this task. I will appreciate any suggestion. Xserve admin provides URL aliases and redirects. Is it possible to use that to resolve my problem. Does anyone can teach me how to set up "type", "pattern" and "path"?
Thanks in advance!

What you're asking for is not trivial to do; you're basically usurping how the file-based presentation works, which means you're going to be writing some code. Simple redirects are easy, but they don't provide your required transparency with the target files, and the scheme doesn't scale all that well. The hack approach is to use file (or directory) links; the ln command and related. This gets ugly to maintain. The "big hammer" approach is to load the content into a content management system (CMS; eg: Drupal, Wordpress), and let the CMS manage all this stuff for you.

How to set Target URL in Jdeveloper 10.1.3

There is an error when i build a portlet with Jdeveloper coz Target URL is wrong
So i want to set Target URL again to referenced to localhost
( I set in hosts file:
*192.168.1.2 namdinh.com*
but when I build my portlet, Target URL still is http://192.168.1.2:8988..... )
Please show me what i must do in this case :(
Thanks so much!

Hi,
Go to Tools > Embedded OC4J Server Preferences... > Global > Startup.
Look for the options in "Host Name or IP Address Used to Refer to Embedded OC4J".
William

GRC 10 - SSO via Portal - how to redirect url in notification variables

Dears,
I am in the process of designing our GRC 10 machine to be accessed via SSO in the Enterprise Portal. Yet I cannot find any info on what will happen with the URLs that are placed by ARM MSMP workflow in the variables of notifications/approvals.
I typically would (as in 5.3) expect a redirect URL to be made available as an option.
As an example: the Firefighter Log notification standard holds a variable pointing the URL to :
http://GRC10server:GRC10port/sap/bc/webdynpro/sap/grac_ui_spm_log_email?sap-client=001&sap-language=EN&WF_ID=53FB8FEAC9E260D6E10000000AF90C44&APP_TYPE=1
Yet now with SSO via the portal we also want this URL to go via the portal instead of directly to the GRC machine. How can we achieve that?
Is there a configuration way to have GRC10server:GRC10port adjusted to the portal address..
(mind that the WF_ID segment in this url is dynamically generated, so directly sqeezing in a static portal url is not an option)
Cheers,
Jim

Hi Neeraj,
Thx for your reaction. This unfortunately will not do the job as pasting the URL in the notification template will make it static. The problem is that the URL inserted by default is a dynamically created one which holds a variable pointer to a workflow object id.
Now i am researching if a custom build portal redirect application will do the job. But there must be others having the same problem if you want the GRC iview in the portal to be the 'one-stop-shop' for your GRC users...
Cheers,
Jim

Is there a way to set a url for a link button?

hey guys, so im trying to set a url link to a dynamic button im creating using actionscript...
so far i know that you can do
<linkbutton .....
     click="navigateToURL(new URLRequest('http://yahoo.com/downloadpdf.pdf', 'quote')" />
but when i create my button in actionscript i dont see an option for click anywhere...
the code i have is
                    var newButton:customLinkButton = new customLinkButton();
                    newButton.label = item.@name;
                    newButton.tabId = item.@tab;
                    newButton.changeTo = item.@changeTo;
                    newButton.x = item.@posX;
                    newButton.y = item.@posY;
                    newButton.setStyle("skin", null);
                    newButton.styleName = "dynamicButtonStyle";
                    if(newButton.changeTo == "downloadFile"){
                    newButton.addEventListener(MouseEvent.MOUSE_DOWN, customButtonPressed);
                    dynamicButtons.addElement(newButton);
i've tried doing newButton.click but that dosent work...
i also tried doing newButton.setStyle("click", "navigateToUrl.........") but with no result...
i just need to set this button so when i click on it, it will show that download pdf file from link box.....
any ideas??

http://www.adobe.com/devnet/actionscript/articles/event_handling_as3_03.html
Basically just use addEventListener(MouseEvent.CLICK, someFunction); (exactly the same as how you did for mouseDown event) and then call the navigateToURL() method from the customButtonPressed method.
Peter

Set Redirection URL in Authorization

Similar Messages

Maybe you are looking for