Set reminder and pop-up Warning

I am new to LabView.
I want to create a checkbox or something in LabView to remind the user to switch the board which is under testing the right place. If the user doesn't check the box, a warning pop up to tell the user not to forget the do this.
I think I may need to use a case structure. Others I don't know how to get it.
Can anyone help me?
Thanks

You don't need to create a checkbox. This control already exists in the System palette. It's just a Boolean control, so you can easily check its state and display a dialog if it's true. For example, you can use the Display Message to User Express VI to display the message. It has an "enable" input that you can wire to the checkbox control.
To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.

Similar Messages

How do i set an appointment into my iphone and get a warning sign for the appointment to date into my agenda ?

Since IOS5.1 , I been having a hard time getting my agenda to show my appointments and give me a warning sign like alarm or a reminder alarm for them .
Now since the new update we have had one app split into two and gotten reminder and agenda .
Now i have been using o r better said been trying to use the reminder , to get my appointments set right .
But it seems to be that i do not get a warning of any type from my phone about the coming date , i set up the reminder for in the first place .
Before ios5.1 the reminder was intergrated into the agenda and for more easy to use since the new .
Now the agenda has no more option to also add birthdays and other handy reminders which are on a yearly bases .
I have been trying to find out if i missed something or other , and come to the conclusion that i see no options aviable to either enable or disable anything of the sort to change this .
Also i have been reading the manual and i notest that in there is no reminder of how this new stationary app from apple itself works and explained .
Anyone can enlighten me about this please , thank before hand and greetings from verbodentoegang

So I have bought a couple of apps on my iphone and would like to transfer them to my itunes library, but not sure how.
iTunes > File > Transfer purchases
When I plug in my iphone and try and sync the two, I get a warning from itunes that everything on my iphone will be wiped and everything from my itunes library will be moved to it.
Have you changed the computer you are syncing with?

How do I set up a POP account that links to my business email account for both receiving and sending

How do I set up a POP account that links my icloud email to my business email account for both receiving and sending?

Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information

Pop up warning: "We are having trouble verifying you membership" and "00 Days Remaining".

I am the administrator of a team of 12 CC Licenses. I believe that we are all allowed to download CC onto one computer at our office as well as one computer or laptop at home for doing work after hours, etc. Many of us have done this and now we are all getting a pop up warning that "We are having trouble verifying you membership" and that we have "00 Days Remaining". This is very disturbing to us since according to your website we have 9 months remaining on our license. Any suggestions on this?

Thank you for your suggestions, however, I did not find an answer to my problem there. After about 8 hours of research, on-line chatting and finally a phone call all I have found out is that #1: I should remove or re-name the "hosts" document in my "/etc" folder. However, when I did that my Extensis Suitcase was disabled. Not a viable solution. #2: our firewall is blocking the Adobe products from contacting the Adobe server to verify our membership, therefor I need to install one of 17 possible URL's in our firewall to allow the connection. I cannot do this until next week when our IT guy is in for his bi-weekly visit. This does not make since to me because 3 of our team have not tried to install CC on a second computer and they are not having any trouble at all. So how could the firewall be the problem? I believe the problem is that it is impossible to find out the proper procedure to install CC on a second computer (home or laptop). Originally I was told that I needed to remove the existing user by clicking on the "X" in the CC admin-licenses panel and resend the invitation again so that CC could be installed on a second computer. All of our problems started after this was done. Now I am told that after the first license invitation was sent all that needed to be done to install on a second computer was to log in to the creative.adobe.com web-site, click on the Download Center tab and simply download everything you need on the second computer. Brilliant! Simple! Why is this not explained anywhere! So now I think I will try uninstalling CC from my second computer and try the Brilliant, Simple way and see what happens.

Set height and width of pop up page.

hi,
How can i set height and width of pop up page.
Thanks

Hi ,
Try these inbuilt javascript functions
html_PopUp(pURL,pageName,pWidth,pHeight) or
popUp2(pURL,pWidth,pHeight)Thanks,
Manish

Trouble Deleting and re: Setting Up New Pop account on iPhone

Hi,
I have a new hosting provider so I need to re-set up my POP mail account on my iPhone. I first deleted the mailbox account on iPhone, then re-created it with the settings provided by my email provider. I know these settings are correct, because the whole process worked on my iMac mail.
The problem is that I can send mail from the newly set up mailbox, but I cannot receive mail. Both my incoming and outgoing mailservers are the same.
Could my problem be that both my previous and current mail providers have the same Server/Host names?
Could it be that I did not successfully deleting my old host's settings? I still see all my old mail on the iPhone from my previous provider.
My new host says it's an iPhone problem because I have entered the correct settings and mail to and from the new server is working on my iMac.
Thanks for any suggestions!

Hi hilmil,
If you are able to send but not receive mail after re-setting up your account on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden

Querying/setting "Print notes and pop-ups" application preference

Hi
I'd like to be able to alert the user if a particular setting is disabled within a plugin application I've written for Acrobat 9 Pro. The particular preference in question is the "Print notes and pop-ups" setting in the Comments preferences page.
I've tried querying the value using AVAppGetPreference(avpPrintAnnots), but it seems that the particular constant I pass doesn't refer to what I assumed it does. Is there another I should be using instead? I'd have tried using the AVAppGetPrefBool or similar function, except it requires a key parameter containing a value that doesn't appear to be documented anywhere.
Failing to access the preference store via the API, I eventually found that the value for the setting I'm after is stored in the windows registry at HKLM\Software\Adobe\Adobe Acrobat\9.0\Annots\cPrefs\bprintCommentPopups, however setting this value in a AVAppDidInitialize callback function is already too late the application to read the new value I've set, and I couldn't find a more suitable callback; not that I was able to find a complete list of these in any of the documentation.
Regards, Andrew

Please forgive me for pushing the matter, but given the absence of documentation on this matter, I really have no other option.
Inserting #define avpPrintCommentPopups (Str("printCommentPopups")) into my source file didn't work either, the Str macro is also undefined. Besides this point, why exactly should the define have worked? The AVAppGetPreference function/macro takes an enum value as an argument, not a string.
If you are able to supply me with the relevant section and key names for the AVAppGetPrefBool function I would be happy to use this function instead.

When I play games in Mozilla on fb..some setting changed and now the pop up window that appears to send gifts to my friends only lists 3 ppl at a time some games i have a scroll down button others i dont..can u help m fix this please?

When I play games in Mozilla on fb..some setting changed and now the pop up window that appears to send gifts to my friends only lists 3 ppl at a time some games i have a scroll down button others i dont..can u help m fix this please?

Hi Winnie
Unfortunately I have been sick and did not read the message before. I apologize.
I have not received help beyond what is on the page. But when I get I tell you.
I hope you can get answers. If you receive, I ask that you share with me.
thank you very much
best regards
AC
Date: Mon, 27 Feb 2012 09:33:10 -0700
From: [email protected]
To: [email protected]
Subject: Pop up Window before saving remembering the need (forcing) to fill required fields in a form
    Re: Pop up Window before saving remembering the need (forcing) to fill required fields in a form
    created by Win_Form in Forms - View the full discussion
Hi ACI wonder if you can share any responses on to your question above?I too have never used a script but, I have the same problems as you in regards to building a form. And wants to have the same 'protection' and message reminders for the end users. Any information, including a script and/or a contact email of experts you can share with me will help tremendously. Thank you so much in advance. Winnie
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4232307#4232307
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4232307#4232307. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Forms by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Pop up warning message while creating PO

Hi,
How to give a Genral or a POP up Warning Message while creating and checking a PO in ME21n and ME22n.
Even i tried in changing the local setting in the menu bar, but it doesnt work.
Help and suggestions will be much appreciated.
Thanks & Regards.
Kumar.

Hi Jay,
I tired with the BADI ME_PROCESS_PO_CUST in the method IF_EX_ME_PROCESS_PO_CUST~CHECK, but still i am able to display only error message not Warning message.
Any suggestion regarding this.....
Thanks & Regards.
Kumar.

Keychain problem and "Set date and time automatically"

Something very strange appened to me today. I spent a few hours to get it through.
All starts when I decided to open System Preferences and *set date and time manually* (I lost date and time because I left my PowerBook without its battery for an hour). At the next login, Leopard was no more able to access keychain's stored passwords, even if all items on Keychain Access were right there. Everytime I tried to read one item's password, a pop-up window reminded me that I had not the right to do it. As soon as I set back "date and time" on automatic (time.euro.apple.com - for me) all became normal (all iCal reminders appeared at on time) and all services started to get their passwords from the stored list.
Sorry for my English (I'm from Italy).
Someone got the same issue?

That looks like the correct IP address for the Apple NTP. Not sure why your AEBS is not getting the time stamp.
Would you mind double-checking the following setting, using the AirPort Admin Utility?
AirPort Tab - Base Station Options: Logging/NTP
- Set Date & Time Automatically: time.apple.com (checked)
Is it possible that you have UDP blocked on port 123? Is your AEBS connected to another Internet router?

"Set Reminder" inoperative after DVR recording

Hello All, I set the DVR via the website to record a movie. It worked fine, after stopping movie, and saving it for later, I exited the DVR menus. When I try to use the "Set Reminder" function in the TV Listings, a dialog box pops up asking me if I want to "record show, upcoming shows, exit". I rebooted the STB w/no results. This is happening on the DVR STB box itself, not on one of the either two HD STB's I have. I searched the Forums and Help extensively, and found null. I have yet to try any of the other STBs, and have not rebooted the router either. Ideas? Thanks In Advance, RJMac

DVRs do not have reminders - only the option to record. There are several threads here about his issue and it's possible Verizon will add this feature in some future update, but it has not been promised as a feature.
Message Edited by Keyboards on 08-02-2009 08:43 PM
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to you set up a POP email account on iPhone 5S?

How do you set up a POP emial account on iPhone 5S. It only gives me an option for IMAP and I need POP
THANKS

Turn it on airplane mode. Then set up you new account with all of your credentials. Save, once it allows it. Turn Airplane mode off, and then go back and select POP.

LC_NUMERIC and LC_TIME bash warning when logging into TTY

I recently re-installed Arch after bouncing around a few distributions, and ever since I completed the install, I've had the following error when logging in to the TTY (only there, never noticed it anywhere else). Specifically, the error reads:
-bash: warning: setlocale: LC_NUMERIC: cannot change locale ()
-bash: warning: setlocale: LC_NUMERIC: cannot change locale ()
-bash: warning: setlocale: LC_TIME: cannot change locale ()
-bash: warning: setlocale: LC_TIME: cannot change locale ()
Output of locale:
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
locale -a
C
en_US.utf8
POSIX
en_US.UTF-8 is also uncommented in locale.gen, and it's been generated. I haven't gotten any locale errors in any application I use, and it only appears before the prompt after logging in to a TTY screen. I've also not set those variables to anything else in /etc/profile, /etc/bash.bashrc, .profile/.bashrc. Logging into the root user instead of my user account does not result in the errors. Also, it seems from the error that the locales are being set to "", and I can't for the life of me figure out where it's coming from. I've searched the forums for similar problems, and most of these errors included warnings about files and folders not existing, which doesn't happen here, and were resolved by re-generating the locale (I've tried it, no change). The only one that came close was an old forum thread about guarddog generating a different set of locale's using incorrect locale definitions, which resulted in the same errors. If anyone has a suggestion as to how to fix this (or a handy trick for finding all files where locales are set), I'm open to them.
.bashrc:
# .bashrc (2013, Dec 11)
[ -z "$PS1" ] && return
# set a fancy prompt (non-color, unless we know we "want" color)
case "$TERM" in
xterm-color) color_prompt=yes;;
esac
if [ -n "$force_color_prompt" ]; then
if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
# We have color support; assume it's compliant with Ecma-48
# (ISO/IEC-6429). (Lack of such support is extremely rare, and such
# a case would tend to support setf rather than setaf.)
color_prompt=yes
else
color_prompt=
fi
fi
if [ "$color_prompt" = yes ]; then
PS1="\[\e[0;37m\]⮀\[\e[0;32m\]\u\[\e[0;36m\]@\[\e[0;32m\]\h\[\e[0;37m\]:\[\e[0;33m\] \W\[\e[0;37m\]\[\e[0;37m\]\$\[\e[0m\] "
else
PS1="\[\e[43m\]\[\e[31m\]\u\[\e[0;33m\]\[\e[46m\]⮀\[\e[34m\]\h\[\e[0;36m\]\[\e[47m\]⮀\[\e[33m\]\W\[\e[0;37m\]⮀\[\e[0m\] "
fi
unset color_prompt force_color_prompt
# Alias definitions.
# You may want to put all your additions into a separate file like
# ~/.bash_aliases, instead of adding them here directly.
# See /usr/share/doc/bash-doc/examples in the bash-doc package.
#if [ -f ~/.bash_aliases ]; then
# . ~/.bash_aliases
#fi
# enable color support of ls and also add handy aliases
if [ "$TERM" != "dumb" ] && [ -x /usr/bin/dircolors ]; then
eval "`dircolors -b`"
alias ls='ls --color=auto'
#alias dir='ls --color=auto --format=vertical'
#alias vdir='ls --color=auto --format=long'
#alias grep='grep --color=auto'
#alias fgrep='fgrep --color=auto'
#alias egrep='egrep --color=auto'
fi
##custom aliases
alias ls="ls -la --color=always --classify"
alias lh='\ls -a --classify | grep "\."'
alias halt="sudo shutdown -P now"
PATH=$PATH:$HOME/.rvm/bin:$HOME/.gem/ruby/2.0.0/bin # Add RVM to PATH for scripting
.profile:
# ~/.profile: executed by the command interpreter for login shells.
# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
# exists.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.
# the default umask is set in /etc/profile
#umask 022
# if running bash
if [ -n "$BASH_VERSION" ]; then
# include .bashrc if it exists
if [ -f "$HOME/.bashrc" ]; then
. "$HOME/.bashrc"
fi
fi
# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
PATH="$HOME/bin:$PATH"
fi
PATH="$PATH:/usr/local/sbin"
PATH="$PATH:/usr/local/bin"

An update:
I've tried explicitly exporting both variables with en_US.UTF-8 in my bashrc, which has resulted in no change whatsoever. Checking the value of these variables from my running system yields an empty return (i.e. the variables aren't set). Can someone let me know if these variables are set on their system? If they are, I'll see if I can set them manually and if that resolves the issue.

Please Help, After Kernel panic restart failed- apple swirl(6 hrs), SafeMode-failed, SUMode-sucess. Could not unmount disk to erase. Repair permissions-multiple fail errors:unable to set permissions on... unable to set owner and group...

Please Help, I deleted an account that was the same name as the administrator but was not the administrator. Also a samsung galaxy s phone was charging through the usb port.
I closed out a program and got a message that the temp file could not be stored/saved.
Then a Kernel panic message occurred and restart was necessary.
The restart resulted in the screen with the apple logo and a continous swirl for 6+hrs,
Attempted Safe Mode start up, unsuccessful,
Single User Mode-sucess.
Ran $ fsck_hfs -rfd /dev/disk0s2 Ran several times repairs made with one which remained. something about a node.
No change in start up attempts
Started with install CD matching current OS 10.6
Ran Disk Utility Repair Permissions resulting in multiple errors:
One line/error
Warning: SUID file /////Ardagent has been modified and will not be repaired
144 lines/errors of this type of series of lines
Group permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
unable to set owner and group...error 22: Invalid Argument
unable to set permissions on...error 22: Invalid Argument
Ran Repair Disk, result:
Error: Could not unmount disk (in red)
Ran Verify Disk, result:
The volume HD appears to be ok (in green)
Next I attempted to erase the dist to start from scratch since I have data backed up on time machine.
Error message box
Volume Erase failed
Volume Erase failed with error:
Could not unmount disk
I am looking to solve without buying DiskWarrior unless only resort.

So it looks like solved it for now I will update later. What I did was after starting from the install cd for the 10.6 system I ran from terminal ran:
diskutil disablejournaling /dev/disk0s2
diskutil disableownership /dev/disk0s2
diskutil repairPermissions /dev/disk0s2
then i closed terminal and then when to disk utility and chose to repair disk with results all was fine. Then ran repair permissions and got similar results from terminal function next I erased disk and then chose to restore from time machine and it is now restoring! yea!

Set reminder and pop-up Warning

Similar Messages

Maybe you are looking for