Set required status for all subtypes first error

Hello,
While implementing OSS note 1744002 for Application Control Workflow i had the following error.
In fact, i added a new attribute for BOR bus2201.
When i wanted to change the status to implemented, i got the following error 'Set required status for all subtypes first'.
Thanks,
Meriem.

Hi Meriem,
Any new attribute should be added to the newly created custom SubType of the Object type BUS2201, but not Object BUS2201 itself.
Revert the BOR BUS2201 to its original state and add the new attribute to your z<subtype>. You will no more get the error.
Regards,
Kiran

Similar Messages

Set User-status for PP order

Hi All,
How can I set the user-status for a PP order, also let me know which user exit suits this requirement, as I know I have to make use of a FM or a BAPI which sets the user-status in the user-exit somewhere.
Thanks
Mark

Hi,
Try the following enhancements/exits for setting the status for PP order.
STATTEXT
CCOWB001
COIB0001
Regards,
Anji

Setting Default Preferences for All Users in Crystal Reports Server 2008 v1

We are currently looking to set the default preferences in the CMC for all of our users.
I did locate this page Link: [How to set default preferences for all users in Infoview 3.1/CRS 2008]
The first part of the thread did seem promising but I am unable to find the sample .jsp code that people recommended.
I would assume that this scenario is common enough that someone knows a way to set universal preference defaults.
Thank you

I thought I could just run it too but when I attempt to I get a Windows Script Host error:
Script: C:\User Prefs.vbs
Line: 1
Char: 1
Error: Expected statement
Code: 800A0400
Source: Microsoft VBScript compilation error.
I noticed the first most line seems to be markup for a web interface though I am not familiar with vbs so I may be wrong. I used the publishing wizard to put the script on the CMC to attempt to run it through the CMC but it still does not work.

How do I set the wallpaper for the the first page only

how do I set the wallpaper for the the first page only.I have my ICE #'s as wallpaper but I only want it on the first page

When you set a wallaper you are asked where you want to set it. Either Lock Screen or Home Screen or Both.
If you choose Lock screen it will only appear when you wake up your phone.
If you set it to Home screen, then it wil be set behind the app icons on all your home screens.
If you choose both, then it will be on both.
Not sure what you mean by the " have a photo of my ICE in contacts that I am trying to use????"
The Photo should be in the Photos App. how is it in contacts? is it assigned to a contact?

Help fix my function to show status for all folders

I have created a function (tow of them for the same purpose) but they are not working. They compile but when i call them I get null result.
What I want to do is get folder status for all folders in the database. There is a table called folder with status code, and another table called validstatus with the statuscode description
So when you look at the older you just see the status code which is a number but then using the function you will get the desription of what that code means.
Here IS THE function. Maybe I am not doing it right when I call them.
CREATE OR REPLACE FUNCTION f_folderstatus (v_folderrsn IN NUMBER)
RETURN VARCHAR2
IS
v_return VARCHAR2 (128);
BEGIN
SELECT distinct vs.statusdesc
into v_return
FROM folder f, validstatus vs
WHERE f.statuscode = vs.statuscode
AND f.folderrsn = v_folderrsn;
RETURN v_return;
END;
When I call them using this statement I get null
select f.folderrsn, f_folderstatus3(vs.statusdesc)
from FOLDER F, validstatus vs
where f.statuscode = vs.statuscode
Edited by: user9508421 on Sep 11, 2008 8:11 AM

Now how do I create a function to give folder status for all foldertypes? I will then use this function in a package.
The Folder table has the following columns:
NAME Null? Type
FOLDERRSN NOT NULL NUMBER(10,0)
FOLDERTYPE NOT NULL VARCHAR2(4)
STATUSCODE NUMBER(10,0)
SUBCODE NUMBER(10,0)
FOLDERDESCRIPTION VARCHAR2(4000)
FOLDERCONDITION VARCHAR2(4000)
FOLDERNAME VARCHAR2(80)
The validstatus table has these columns:
NAME Null? Type
STATUSCODE NUMBER(10,0)
STATUSDESC VARCHAR2(80)

[svn:fx-trunk] 11999: Fixed: ASC-3889 - Using setting in a for loop causes Verify error

Revision: 11999
Revision: 11999
Author:   [email protected]
Date:     2009-11-19 11:37:09 -0800 (Thu, 19 Nov 2009)
Log Message:
Fixed: ASC-3889 - Using setting in a for loop causes Verify error
Notes: emit pop after callstatic to a void function to balance the stack.
Reviewer: jodyer+
Testing: asc,tamarin,flex checkin tests
Ticket Links:
    http://bugs.adobe.com/jira/browse/ASC-3889
Modified Paths:
    flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/CodeGenerator.java

Blacklisting the ahci module does indeed get rid of the error. Would be nice to figure out why it was conflicting with the ahci module though.
I have not yet tried the 173xx drivers, but the latest drivers for the Quadro FX 580 are the 256.53 drivers according to nvidia.
Posted at the nV forums (http://www.nvnews.net/vbulletin/showthread.php?t=155282), so we'll see what they suggest.

Is there any way to set a property for all existing Form Fields of a particular type (Che

In versions of Acrobat prior to version 9, selecting a particular form tool (Textbox, Checkbox), etc. would only display Fields of that particular type in the Acrobat Designer (not LiveCycle).
If one wanted to change a particular property of all check boxes for example, one would select the Checkbox Tool, Click Edit>Select All>Right Click one of the Checkboxes and Set the Property for all of the Form's Checkboxes.
Selecting a particular form tool in the Acrobat (not Lifecycle) Designer in version 9 appears to no longer filter the display to that particular form field type. Is there any way to display only 1 particular form field type in or set a particular property for all existing Form Fields of a particular type (Check Box, Text Box, etc.) in Acrobat 9?

Thanks for the tip..Am aware of this option and have used JavaScript to batch change properties in the past...
Am looking for a way to replicate the interactive procedure available in previous versions. Also, want a way to only display certain Form Field types (use this when analyzing forms which I didn't create).

Set page title for all pages

Hi
Can I set page title for all pages in project, by using filter or something else? Or the only way is to specify the name in each page?
Michal

Might be possible with filters, but that would be a rather expensive task. Just create an include file which you include in all pages. This way you also have a single point of maintenance.

I want all system status for all process orders in COR3

Hi All,
I have small requirement below:
In COR3 tcode after we enter Process order as input, in that screen we can see in 3rd row, System Status and User Status,
Where all these system status and User Status are stored,
How we will get these msgs?
Please help me on this....
Sri

Now i have verified in productin box, i am getting more than one STATUS in JEST for OBJNR , with this value i am getting more than one values, but here i am facing again one more issue:
in T02JT table i am getting some set of status(in table i am getting 10 values) but when i have verifed in COR3 tcode for that particuler order i am able to see only 8 system status...what about remain 2 ?
in T02JT table i tried all options as i put X for status with out X, i tried all options..
Please help me on this...
One more this is i need User Status's also...? how we can will get these values also..
Sri

T&E Task TS20000130 (Set trip status to approved) - pernr locked errors

We are using a delivered task (TS20000130 - Set trip status to approved) in our T&E approval workflow. Since moving this to production, weu2019ve experienced intermittent cases where the workflow step completes with an error because the pernr is locked. Does anyone know what causes the pernr to be locked? Based on when this is happening, it appears that it may be being caused by payroll being locked. Also, Iu2019ve noticed that it executes the step multiple times prior to returning the error. Does anyone know if itu2019s possible to increase the number of times the step is executed before returning an error? Is there a way to change the time period between executions of the step?

Hello All,
It might be due to auto locking settings which will lock the user if he/she does not log into SAP for some considerable period of time. At least this is the case at my client. Re-check the Profile Mapping settings and see the difference after unlocking.
Let me know if anyone has more on this or disagrees with my comment.
Rgds
CONMJI

How to set permissions like "For all users" with Sandbox

Hello!
Hello!
I am using Sandbox for Mac OS X Leopard and I've got a question to you:
How can I set up a folder to behave like the For all users folder in the users directory?
Greetings

Well, sandbox sets ACL's not posix permissions. The sticky bit is a posix permission. Sand box will allow you to do something similar to the sticky bit using ACL's, but the exact duplication of the sticky bit is not possible, but something just as useful or more useful can be easily implemented.
To set the sticky bit you will need an app called FileXaminer or the Terminal.app command line.
to set the sticky bit simply put "1" in front of the the permissions number when you run chmod on the command line, here is an example:
chmod 1775 /users/data/shared #assigns permissions 775 and the sticky bit#
chmod 775 /users/data/shared #assigns permissions 775 without the sticky bit#
note: note actual use of the chmod and chown commands will, in most cases require the sudo (super user do) command to be used with them. example:
sudo chmod 1775 /users/data/shared #assigns temporary super user priviledge#
The way I set my shared user's directories with ACL's is this:
first I created folder /users/data -permissions=777 (everyone).
I had three users so I created folders for each in /users/data:
/users/data/user1 #this is just example-substitute real user name#
/users/data/user2
/users/data/user3 #etc,etc,#
set the posix permission on each user folder 700 (owner:read,write,execute)
set the owner and group on each one accordingly:
chown user1:staff /users/data/user1 #substitute real user name#
chown user2:staff /users/data/user2
chown user3:staff /users/data/user3 #(etc,etc)#
Now each user has their own data folder they can read and write to at will (when they are logged in to their user account).
They can safely create and maintain their data and no one can delete it.
Since these are shared data accounts. other users will need to read the data, this is where the ACL's come in.
You will need to use Sandbox to place ACL's for each allowed user, on each of the user directories:
0: user:joe inherited allow list,addfile,search,add_subdirectory,readattr,writeattr,readextattr,writeextattr,readsec urity,file_inherit,directoryinherit
1: user:mary inherited allow list,addfile,search,add_subdirectory,readattr,writeattr,readextattr,writeextattr,readsec urity,file_inherit,directoryinherit
2: user:sue inherited allow list,addfile,search,add_subdirectory,readattr,writeattr,readextattr,writeextattr,readsec urity,file_inherit,directoryinherit
Basically with the above ACL's the only thing the allowed user can't do is delete files. They can copy files, they can add files, etc. This behavior is somewhat similar to what can be accomplished with the sticky bit, but much more controlled and structured. That is the beauty of using ACL's.
Using SandBox you can taylor the permissions as you see fit for each every user. You can set permissions for an administrator to delete files as well. You can take away or add permissions for each user as you see fit. let your imagination be your guide.
ACL's weren't meant to replace posix permissions, but rather to allow administrators to fine tune user permissions.
Kj

How can I set a customized view in finder set as standard for ALL folders?

As I have a large number of folders, I need a specific view in finder: symbol view, sort by program and name. I tried to use this settings as standard for ALL folders, but using the 'set as standard' button does only work for the folder I am in, but not for ALL folders. I even tried to use this settings on the hard disk level in finder, but what ever I tried, it never applies to all folders. The problem occurs on each of my devices and on Yosemite OS 10.10.1. as well as Mavericks 10.9.5. Any ideas on how I can make the 'standard' work on all folders?

As Vinod says, unique key validator would be fine.
However, In Gabriel's blog:
Performing a unique key validation for an attribute that is declared to be unique in the database requires a round trip to the database. This is quite expensive and there is a fast and easy way to work around it.Is false on several fronts:
1). it's not expensive - it's actually cheaper than the alternative
2). Unique key validator can require many trips to the DB to validate - it must check all other rows in the EO to ensure there is no duplicate, and all of those rows must be fetched into the middle tier to do the validation: this is expensive.
The "cheapest" way to do this: unique constraint in the DB
John

How to set the status for a customer plan to RELEASED.

Hello all,
I created a program for mass creation of customer plans. But after the creation of a plan, the status should be set to released, so that the user can go about creating the trade promotions for the customer plan. Can anybody tell me how to set the status of a customer plan to RELEASED.
Thanks,
Disha.

Hi Clemens,
I am not talking about doing it in the CRM_UI transaction..I created a program..which would create the customer plans based on the planning account data provided. I was succesfull in creating the plans, but I am not knowing how to release it, if only anybody can tell me about a Function module or method, which can help me do this, that would be great
Thanks,
Disha.

Setting password expiry for all users in oracle apps R12

hi,
i have OS RHEL 5,Oracle apps: 12.1.1
now i want to set the password expiry for all the users in oracle apps to 60 days..
can some on please guide on how this could be done.
It is urgent,your help is appreciated.
regards,
Milan Rathod

Hi Milan;
Check below thread
How force users to change passwords every 60 days
How force users to change passwords every 60 days
PS:Registered: Sep 24, 2010
Total Posts: 38
Total Questions: 30 (28 unresolved)
Please change your thread status to anwered which you already get answer for your issue
Regard
Helios

Can I Set View Prefs for ALL Windows?

Is there a way in Tiger to set preferences so that ALL Finder windows ALWAYS open to a chosen view? If I want to see all windows in List View, for example, whenever a window is opened or created so that I don't have to reset windows individually, can this be done?
G5 Dual 2.7 Mac OS X (10.4.9)
G5 Dual 2.7 Mac OS X (10.4.9)

That actually doesn't completely work. I have the same settings for my 10.4 Finder. I also have the highest level directory (ie: the boot drive) set to icon view with Brushed Metal and Sidebar turned off. However, all new folders created on the desktop always begin in Brushed Metal w/ Sidebar view. Also, folders that have been set with Brushed Metal/Sidebar turned off, open with it turned on when first navigated to via the Dock.
In other words, open place your boot drive in the Dock. Set it to icon view with Brushed Metal and set Finder to open folders in new windows. Create a folder at the highest level of the drive. Open it to confirm it has taken the parent folder settings (in this case icon view, with Brushed Metal/Sidebar off). Close the window. Now open it via pop up menu from the drive icon in the Dock. Not only does it open in Brushed Metal Siderbar on view, but also at a different size, and sometime different Desktop location. Only when you manually turn off Brushed Metal at that point will the two versions of the open folder match when navigated to both ways.
This behavior drives me nuts, as I tend to stay in non-Brushed Metal view, in either list or icon. I have several drives, and bop between Dock pop-up navigation, and regular old double click drilling. I'm constantly having to manually set windows to non-Brushed metal view, even after they were created with it turned off. I wish this inconsistency, and the fact that all new folders created at the Desktop begin with Brushed Metal on, were controllable system wide. However, it's been this way in OSX since as early as I can remember. So I doubt it'll ever be addressed.
--Robb

Set required status for all subtypes first error

Similar Messages

Maybe you are looking for