Set RMAN catalog default setting for all databases

Hi,
I am running a 11gR1 RMAN catalog.
I am wondering if is it possible to change a default configuration setting in the RMAN catalog  so that all the new databases will inherit it.
For example, I would like all the new databases registered to the catalog to have:
BACKUP OPTIMIZATION ON
RETENTION POLICY TO REDUNDANCY 7
Thanks,
massi

No, the catalog cannot "dictate" configurations for databases.  Each database retains configuration in the controlfile and this can be updated only by an rman connection (i.e. rman connecting to the database as a target). The CONFIGURE command in rman is used to set a "permanent" configuration parameter for a database but must be issued for each database individually.
Hemant K Chitale

Similar Messages

  • HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

    In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
    I've tried everything to get a custom umask set for all apps. It just seems impossible...
    Is there a replacement for launchd-user.conf?

    Please file a bug report: https://bugreport.apple.com
    I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

  • Set default password for all users including csv file

    I would like to set the default password for all users
    including the ones imported in the csv file?
    Also now the default passwrd in set to the email address. How
    do i change that setting to the "login" setting in the csv file so
    those users can loin with that password?
    Kinda the same question but do yuo get the idea?
    Thank you,
    Chip

    You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
    http://www.rubicode.com/Software/RCDefaultApp/

  • It should be possible to set default behavior for all file types

    It should be possible to set a default action for all file types. I'm so tired of having to manually sit and say "save this file" because Firefail always defaults to "open with" and has disabled the "Do this automatically for files like this from now on."
    And spare me the zealotry religious excuses for why its the fault of websites and not Firefail
    ''edited to remove swearing''

    I do want users to have full control to be able to set any folder view they want by using Apply to Folders; I just want to set the initial/default view to Detail because that matches what the majority of my users want.
    That is, what registry setting changes when I go to a picture folder, change the view to Detail, and click Apply to Folders? Having done that, I still retain the ability to change it to some other view and apply that to folders. But what registry setting
    represents the change I just made when applying Detail view to all Picture folders.?
    This settings is simple via GUI, but it is related a lot of registry keys, I made a test in my machine, capture the "Apply to Folders" process using Regshot tool (this is a small tool which can compare the regsitry changes after you change some
    settings), and this is the result:
    this is part of the registry changes, a plenty of registry keys and values need to be changed. hard to list them here. if you have interests, I recommend the tool Regshot, it can help you capture the regsitry changes.
    NOTE: Please Note: The third-party product discussed here is manufactured by a company that is
    independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's
    performance or reliability.
    Yolanda Zhu
    TechNet Community Support

  • Set default application for *all* users

    Hello people, my 1st post here, so forgive me for possible imprecisions, ambiguity, inappropriateness....
    When I search how to set/change the default app for opening some type of file I always find the answer "through the getinfo". But doing that, I only change the default application for the current user.
    I want to do that for all users of my mac, without repeating the getinfo process for each of them.
    Is there any adminstrative tools for doing that?
    Thank you.

    You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
    http://www.rubicode.com/Software/RCDefaultApp/

  • Set a default layout for all users via DIAPI

    Hello everyone,
    I am attempting to set a default report for all users/business partners using the DI-API. 
    I can accomplish this in the B1 application via Tools> Layout Designer...>Set as Default
    If there are entries in the RDFL table for this layout, I am prompted to delete these entries and set this layout as the default for all users/BP's
    Based on the SDK Documentation, the following code should accomplish the same thing via the DI-API
    (stripped down for clarity)
    Dim oDefaultReportParams As DefaultReportParams
    oDefaultReportParams = oLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
    oDefaultReportParams.LayoutCode = sMyLayoutCode
    oDefaultReportParams.ReportCode = sMyReportCode
    Me.oLayoutService.SetDefaultReport(oDefaultReportParams)
    Code executes fine, but it doesn't have the expected impact on settings.  The above code adds an entry to the RDFL table rather than changing the DfltReport field in the RTYP table like I expected, so instead of setting the default report globally for all bps/users, its adding an entry to the RDFL table to set the value for a specific user/bp
    I experimented by including and setting the following properties to every combination I could think of with the same results
            oDefaultReportParams.UserID = 'tried 1, 0, -1
            oDefaultReportParams.CardCode = 'tried "", "0", "-1"
    Am I misunderstanding the API, or using the wrong objects/calls...? If all else fails I could accomplish this via the UI-API instead, but the application was intended to be a stand alone app that didn't rely on SAP B1 application running, so any help or suggestions would be much appreciated.
    Thanks!

    Hi,
    Please repost at SDK forum to get quick response. Close this thread here with helpful answer.
    Thanks.

  • How do you set default programs for all users when deploying Windows 8.1?

    I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
    to be the default for opening pictures, videos, etc. Can that be done?

    Great question, this has been bugging me too!
    So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
    After filtering out the junk, I could see some *interesting* writes to the registry:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
    "Hash"="57y87/ogggU="
    "ProgId"="PhotoViewer.FileAssoc.Jpeg"
    But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers.  This is both good news and bad.
    Background:
    One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
    just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
       Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
    Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
    Solution:
    This blog appears to have the answer:
    http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
    New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
    was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
    From:
    <Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
    To:
    <Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
    I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
    perhaps seperate GPO's for Desktops/Laptops vs Tablets?
    -k
    Keith Garner - keithga.wordpress.com

  • Setting Default Preferences for All Users in Crystal Reports Server 2008 v1

    We are currently looking to set the default preferences in the CMC for all of our users.
    I did locate this page Link: [How to set default preferences for all users in Infoview 3.1/CRS 2008]
    The first part of the thread did seem promising but I am unable to find the sample .jsp code that people recommended.
    I would assume that this scenario is common enough that someone knows a way to set universal preference defaults.
    Thank you

    I thought I could just run it too but when I attempt to I get a Windows Script Host error:
    Script: C:\User Prefs.vbs
    Line: 1
    Char: 1
    Error: Expected statement
    Code: 800A0400
    Source: Microsoft VBScript compilation error.
    I noticed the first most line seems to be markup for a web interface though I am not familiar with vbs so I may be wrong.  I used the publishing wizard to put the script on the CMC to attempt to run it through the CMC but it still does not work.

  • CMDLET commands regarding setting a default font for all users using OWA on an exchange 2010 platform

    HI,
    We are running Exchange 2010 and are migrating users from 2003 to 2010 with no problems.  The client has asked me to set OWA font to LuidaSans which I can do for individuals with no problems.  However, when I try and run the following command
    Get-Mailbox -Resultsize Unlimited | Set-MailboxMessageConfiguration -LucidaSans but then got a message to state
    "property composefontname can't be set on this object becuase it requires the object to have version 0.1 <8.0.535.0> or later.  The object's currant version is 0.0 <6.5.6500.0>"
    What object is this reffered to?  Can anyone help please?
    Thanks
    Paul

    Hi,
    To set a default font for all users, you can use this command: -
    Get-Mailbox | Set-MailboxMessageConfiguration -DefaultFontName "Trebuchet"
    You can use any font style in place of “Trebuchet”.
    I hope this information will be helpful for you.
    Thanks and regards
    Ashish@S 
    Ashish@V

  • Set default startpage for all Browsers in LDAP

    Hello,
    is there a way to set a default startpage for all Browsers in a OSXServe Workgroup?
    greetings
    Heiko

    For all (different) browsers? No. Each tends to have its own specific scheme.
    For specific browsers, such as [Safari, yes|http://discussions.apple.com/thread.jspa?threadID=2164380].

  • Setting the Default Homepage for all current and new users but leave it user modifiable.

    I am in the process of creating our new Windows Deployment Image based on Windows 7. Previously I was able to use the browserconfig.properties file in the Firefox main program files directory to change the default homepage for all new profiles while still allowing the user of any given profile to change their homepage. I have not yet found any equivilent in FireFox 4. Any help would be appreciated. Thanks.

    > The locations of the files are different and none of them show up under
    > the new user, but do show up for existing users.
    Enable logging for GPP files to see what's happening:
    http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • How to set the same General settings for all users

    Hi Experts,
    How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
    Regards,
    Arti.

    Hi Arti!
    You can default user settings in a PFCG role, in the "personalization" tab.
    If you have a PFCG role that is common to all your users, you can set the default values here.
    However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
    Matthias

  • How do I set Firefox to be usable for all users on one computer?

    How do I set Firefox to be usable for all users on one computer?

    I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
    [https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

  • How can i set a global error page for all error cod

    how can i set a global error page for all error code?
    i don't want to leave a long list in the web.xml file.could any one help me?
    thanks

    If u have a common Error JSP named as ErrorPage.jsp
    You need to have the following piece of code in the JSP as :
    <%@ page isErrorPage ="true"%>
    This makes it as the Common Error Page for the Application. Now all you need to do is from other JSP's throw the Exception to teh container. The container will redirect to this Page and process accordingly.
    Thanks and regards,
    Pazhanikanthan. P

  • Release date set to 1/5/11 for all podcasts and iTunes U files

    I have an ongoing problem with iTunes on my MacBook Pro where the release date is set to 1/5/11 for all podcasts and iTunes U files. Although I can seemingly correctly sort by release date, the date is the same across all files. Can someone advise as to how I might go about correcting this such that the actual, proper, release date is shown? Thanks in advance for the help! - mvrb

    @King_Penguin thanks for your help
    See below some additional info:
    I have 3 Macs:
    1 X MBPr 2012 (OS X 10.9.1
    1 X MBPr 2012 (OS X 10.8.5)
    1 X iMac 2009 (OS X 10.8.5)
    1) All 3 Macs have access to same accounts and have same apps in iTunes.
    2) Problem is only found on both MBPr's 2012 with one NL and 1 US account. With one NL account (inactive) I have no issue on all three.
    FYI I have multiple iTunes accounts: 2 for the Netherlands and 1 for US. 
    I also tried this after deleting the only 2 apps I got from the US iTunes Store but that did not solve my issue.
    I think the matter is related to my iTunes account(s) and NOT to a computer (prefs file)

Maybe you are looking for