Set "Sales Office" as an authorization for all sales document

Dear SD Expert,
        Base on ECC 6.0, I have to set authorization which check u201CSales Officeu201D in create/ change / display all sales document.
         I found that authorization object u201CV_VBKA_VKOu201D contain authorization filed ; that are, sales org, distribution, division, sales office and sales group. Also u201CV_VBKA_VKOu201D have assign to (Transaction code: VA03, VF03) as standard SAP (see in T-Code : SU24) . However, when I assign; for example, T-Code u201CVA03u201D, u201CVF03u201D in PFCG. After generated profile, only u201CSale org, distribution chan., and divisionu201D is pop-up. I wonder that
1)     Why u201CSales officeu201D dose not show in u201Corganization levelu201D ?
2)     How can I set u201CSales Officeu201D as an organization level? for checking an authorization
Please give me step-by-step.
Regards,
Prach

Refer SAP Help url it may help you , I did not work on this,[Maintain authorizations|http://help.sap.com/saphelp_45b/helpdata/en/91/6cec6eb435d1118b3f0060b03ca329/content.htm]

Similar Messages

Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents.

Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents and I've run Repair on Microsoft Office.
I don't know what else to try.
Any help would be appreciated. Thanks.

A hotfix request has already been submitted for this issue and we have also documented it here
http://support.microsoft.com/kb/983097
Thanks.
Tony Chen
TechNet Community Support

Authorization for Intercompany Sales

Hi,
I have an intercompany situation, company A and company B. UserA can perform sales transaction for company A only. Now with intercompany sales, i want UserA to view sales order for company B but cannot see the pricing condition for company B.
May I know how to perform authorization for this?
UserA have authorization for sales org A. How to restrict pricing condition to sales org A only, but still can view sales order for sales org B?
regards,
zl

Hi,
VA03.
UserA can VA03 for all Sales Order for Sales Org A. For Sales OrgB, UserA can view using VA03 but the pricing condition tab should not be accessible.
How to do this?
Thank you.
regards,
zl

Sales document report for all open documents

hi i need the code for sales document report for all open documents is sd
... can anyone help me out.
thanks in advance

Try transaction VA05. In that choose "Open Orders" along with other selection criteria.
If you want the Open sales order qty in output and its not displayed, do the following.
Sales -> System modification -> create new fields ( without condition technique) -> New fields for lists.
You can change V05TZZMO and structure VBMTVZ from there or use SE38 / SE11.
For both you'll need an object registration in OSS.
Hope this helps.
Thanks,
Balaji

I purchased a text tone from Itunes. It shows up in my library, but not as a text tone. Is there a way for me to set it as a text tone for all texts? Or I am stuck with factory settings?

I purchased a text tone from Itunes. It shows up in my library, but not as a text tone. Is there a way for me to set it as a text tone for all texts? Or I am stuck with factory settings?

So it is conseidered a customized text tones even if it was purchased through iTunes? Confusing. Since I bought it through itunes as a text tone I assumed it would work. OOOPS
Thanks so much

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

How to set user preferred timezone in OBIEE for all objects.

How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

DP - No authorization for all characteristics value

Dear All,
I am trying to implement the role SAP_APO_FCS_SU (APO: Demand Planning Standard User) in SCM 5.0.
When I logon as a user who has been assigned to this role and try to load a predefined selection profile or create one, I get the error You do not have authorization for all the characteristic values selected.
Can you please let me know what I am doing wrong?
Thanks in advance for your help.
Emilie

Hi Raj,
I created a BI authorization object for my additional characteristics (ie, other than 9AMATNR and 9ALOCNO) and then added to the role.
Below is the link for how to create BI authorization object.
[http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm]
Regards,
Emilie

Demand Planning - No authorization for all characteristic values selected

Hello All,
I am trying to load the data and it is giving error "You do not have authorization for all the characteristic
values selected". I can access the data in sandbox but not in Development. SU53 of both are same.
Also the roles are same in both the system. /sapapo/mc77 - maintain selection assignments is also same in both the systems.
Thank you for the help.
Regards
Pratap

Hi,
This is a case of inadequate authorization for display or execution of demand planning.
I don't understand what you exactly mean by
"su53 of both are same".
SU53 gives you a list of the authorization check that the system last executed on the ID.
Here r some suggestions. do an su53 immediately after the authorization error message is flashed.
It shall give you the authorization object which is required for that activity that you were attempting.
Also it suggested the name of role/s which have the required authorization object already present.
It is possible that you might have ALL authorizations in dev system, but the quality and production systems are usually the area where selective authorizations are to be used.
Hence the basis team might not have given you all the authorizations in the higher system where you are facing the above issue.
Hope this helps
Regards

How to set a customized search results template for all users

Hi.
I know the customized search results views are stored in a file called pne_portal.hda that resides on every user's subfolder in data/users/profiles/...
Is there a way to set a customized search results template for all users? If it's impossible, is there a way to modify the Headline view? I'm not able to find the resource or template where this view is.
Thanks in advance.

I wasn't able to understand what was meant by this post. Therefore, I modified the standard template HeadLine View.
Columns for this template are defined in the include slim_search_result_table_header_setup (in std_page.htm).
Here is the modification of the code:
<$if customTemplateId and not (baseTemplateId like customTemplateId)$>
 <$columnsString = utGetValue("customlisttemplates/" & strLower(customTemplateId), "columns")$>
 
 <$else$>

 <$columnsString="dDocName,dDocTitle,dInDate,dDocAuthor"$>

 <$columnsString=columnsString&",xComment"$>
 
 <$endif$>

Diaplay authorization for all modules

Hi All,
Can any one tell me how to assign display authorization for all modules like sd, ps, mm, fico ,hr ..
is there any profile available for that ???
any idea would be great.
Thank for ur help in advance.
Regards,
Venki

> And best would be if you can share the created copy of SAP_ALL with SDN users - hope moderators wouldn't mind this sharing.
Davinder,
I'm afraid you're chasing ghosts here, as have many before you and I'm afraid it will not stop here.
The reason a search didn't bring up an easy solution (see your other thread, SAP BASIS Display only Role) is because there's no easy way to get to a display only role.
Some thoughts:
1- The amount of authorization objects varies from system to system, due to patch levels and installed add-ons so sharing a role built on a 'strange' system will have it's flaws and due to the amount of objects in SAP_ALL or a copy will make it very difficult to spot those.
2- There are somewhere between 150-200 different activity related fields in an ECC systems' authorization objects and for quite a few 03 is not display. Some do not have a display activity. See below as well.
3- There are a lot of objects that do not have any activity related field so putting them in a role and claiming it is read-only is downright dangerous.
To create proper display roles you will need to get requirements from the business, not only to build the roles but also to be able to test them. I've seen long lasting discussions whether printing is a display activity or not......
Jurjen

How can I deploy the setting of clear cache on exit for all users?

How can I deploy the setting of clear cache on exit for all users?

Note that Firefox disables the disk cache if you use "Clear history when Firefox closes" to clear the cache (see about:cache), so you can either disable the disk cache via its related pref or set the prefs related to clearing this data,but then other items that have a check-mark by default are cleared as well.
*browser.cache.disk.enable
*privacy.clearOnShutdown.cache
*privacy.sanitize.sanitizeOnShutdown
You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
See also:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/
*http://mike.kaply.com/2014/01/08/can-firefox-do-this/

Select aentries from table Z-Table for all sales order line items

Hi friends,
can anyone please explain me about the "Select entries from table Z-Table for all sales order line items".
Thanks.

Moderator message - Welcome to SCN.
But
Moderator message - Please search before asking. Press F1 on SELECT and look at the FOR ALL ENTRIES addition. - post locked
Rob

Common Features for all SAles Documents

Hi gurus,
I like to share a piece of information regarding the common features for all Sales Documents;
They are
!) The incompletion Log
2) Fast Change Option..
Any new views can be discussed for the above.
Regards,
Sarosh

Hi refer the link it may help u out
http://72.14.235.104/search?q=cache:p6G8tXimQ2UJ:homepages.wmich.edu/~s4senapt/bus%2520project%25204.htmSAPSDcommonfeaturesforallSalesDocuments&hl=en&ct=clnk&cd=16
Message was edited by:
SHESAGIRI GEDILA

BASIS--to restrict authorization for a PO document type & 122 movement type

Dear All,
Plz guide me how to restrict authorization for a PO document type & for a movement type 122 i.e. for eg. if a user has authorization for PO document type IC then he should not be able to rum movement type 122 for any T-code he runs.
Thanks in advance
Arpit
Basis

Hi,
Your request was not too clear to me.. As per my unde
Here is some details of Authorization object related to Purchase Order:
Document Type in Purchase Order( M_BEST_BSA )
Purchasing Group in Purchase Order (M_BEST_EKG )
Purchasing Organization in Purchase Order (M_BEST_EKO)
Plant in Purchase Order (M_BEST_WRK )
Document Type in Outline Agreement (M_RAHM_BSA )
Purchasing Group in Outline Agreement (M_RAHM_EKG )
Purchasing Organization in Outline Agreement ( M_RAHM_EKO )
Plant in Outline Agreement ( M_RAHM_WRK )
This can be helpfull to you to restrict authorization to PO..
In Organization Level, it can be restricted by Purchasing group, Purchasing organization and plant..
Regards,
Sandip

Set "Sales Office" as an authorization for all sales document

Similar Messages

Maybe you are looking for