Set system status of equipment according to movement type
Hi guys,
I hope someone can help me.
I created two new movement types 943 and 944 as copy of standard 343 and 344.
I'd like to set the equipment status to ELOK if equipment is moved via 344 and delete the status after moving with 343.
I created two new business procedures ZSUH (for 944) and ZSUS (for 943) and did the necessary settings in BS12/BS22/BS32 I think.
If I now do the movement, the status of the equipment isn't changed.
If I manipulate the standard business procedure PMSU to set status ELOK, it's working.
What did I wrong that my newly created one don't work?
Thank you for any help!
Regards,
Florian
has anyone a suggestion?
Similar Messages
-
Hi Gurus !!
I want to set system status APNG when created (or converted) process order , even if master data is correct...
After that, I want to use function read master data to obtain APG status , and then I will be able to release the process order...
Hope you can help me,
Regards
PhilippeHi Philippe
I would recommend to create a customer own status for example Z1 and define this status is set as initial status.
You need to define this status is allowing reread master data and function reread master data will unset this status.
Transaction BS02 to create a customer own status profil, assign it to order in customizing.
BR Sabine -
System status in equipment master
Hello all,
In the equipment master the system status is showing ESTO HUAS SLOR. Is this correct? The material with this serial number is in stock - so ESTO i s valid. But it is not assigned to any sales order (Cross checked table EQBS)...What makes this combination work (System status).
Also, in the action log it says previously it was assigned to sales order but now its in inventory. How to correct this. Please help.
Thanks
RJSHi,
Please clarify that after assigning to sales order have you performed return delivery? Because of this might the link between ESTO and sales order is not there. To assign the ESTO to sales order as EDEL go to the trx BS22, search the status EDEL. Then , you double-click on short text, Search operation PMS8 and set flag "enable" o "warning". Whit this setting, You can post a delivery whit status ESTO EDEL. Hope it works. Thanking you. -
Set system status in sales order
Hi gurus:
I need when i creates a sales order (crmd_order, cic0) the system status set by default = "Lock Distribution"
thanks in advanced
IváHi Ivan,
Glad to know that.
Please confirm and close this message by giving
the point / score to my last reply.
So others will know if they have similar problem nad use
this information in the future.
Cheers,
Gun. -
Setting System Status for CRM Contract
Hi
I need urgent help for changing the system status in CRMD_ORDER, once the Contract is saved.
I tried to use the Function Module CRM_ORDER_MAINTAIN for setting the status. But this FM provides status change on user level.
Please guide me how to set the system status for this scenario.
Thanks in advanceHi.
Try using CRM_ORDER_CHANGE_STATUS to change the system status.
Regards,
Timo. -
Setting System status on assigning User status
We can change the user status by changing the system status ...
is there some work around to change a system status e.g REL on Setting a User Status .. ?
Please advise. ThanksHi,
I think this is possible using "Maintain Substitutions", but no sure. Try out once.
SRP0 - Project Systems -> Structures ->Operative structures -> Work Breakdown Structures (WBS) -> Maintain Substitutions.
Regards,
Punith. -
Hi ,
This is requirment
Based on the guid & status the FM CRM_STATUS_MAINTAIN_OW would update the order user status as approved/not approved & the system status as u201CDistribution locku201D.
As per the above requirement how to set the system status? please guide me
Thanks,
Sen
Edited by: sentchan on Apr 14, 2010 8:54 PMHi Wiktor,
Look at Changing system status depending on user status maybe it helps.
Regards.
Manuel -
PCUI: Setting system status in sales documents
Hi experts!
For sales documents (e.g. Quotations, Complaints) in PCUI, we lack the possibility to enter the system status. In PCUI, only the user status can be changed. In SAP GUI, both system and user status can be set.
For replication issues, we need to set the system status for quotations to "Released". Any idea how this can be achieved? Is there a way to do so via action profile or so? Any other ideas?
Thanks,
SebastianHi,
thanks for your answer. What you describe is correct for the status complete. If I set the user status complete, the system status is also changed to complete. But if I set the user status released, the system status is "in progress" (and not released).
Do you know where I can set the relationship between user status and system status? Or what do you mean by "the user status that corresponds to the 'Released' system status"? How can I check the correspondance?
thanks,
Sebastian -
How to set up an inspection lot for new movement type
Hi All,
I would like to know, how to trigger / set up an inspection lot for a new movement type (ex,Z11) ?
Regards,
PSSNavigation path:
SPRO --> Quality Management --> Quality Inspection --> Inspection Lot Creation --> Inspection for Goods Movements
For more information refer following link:
[How to create new movement type which move matieral into QI stock?]
Hope this helps.
Thanks!!! -
System status blank for equipment - no changes allowed
Hi,
We want to dismantle an equipment as it is no longer at the customer's location.
When I go in IE02, I get following message.
"Change technical object" is not allowed (EQU 10051040 )
Message no. BS002
Diagnosis
The transaction 'Change technical object' is not allowed for EQU
10051040, because no status is set to permit it.
System Response
You cannot carry out the transaction 'Change technical object'.
Procedure
You can carry out this transaction if you set a user status, which
permits 'Change technical object'.
I put the User Status on "Released", but still not possible to change the equipment.
When checking the System Status, I noticed that it is blank.
As no changes are allowed, I cannot manually change the System Status.
Also in IQ02 I get the same message and no System Status is filled.
Anyone an idea how to workaround so we can dismantle the equipment?
Thanks in advance for your inputs!
Best regards,
GeertPete,
Yes I have run that program, but it hasnt changed anything. There is a user status AVLB in the equipment. When i checked in the status profile, this user status is not forbidden for any transactions. The program RISTEQ03 seems to work if there no user status also. But for my case, a user status is there, but there is no system status. Since there is no system status, the equipment could not be accessed through change mode (ie02). I need the system status AVLB in the equipment. The equipment does not even have any other details like functional location, maint. plant, sales area data, etc. in it.
Nazeer -
System status ECUS in equipment
Hi experts,
I have a doubt:from standard when the system status in equipment is ECUS (BS22 I0188), for example after movement 601, do the stock informations in label 'Ser.data' must be update automatically by the system or not?i have not found reference in OSS or library
Thanks in advance
regards
massimilianoYes. The stock information in serial data tab will be updated automatically.
For example..
1) AVLB: serial data (equipment) exist but not stock yet
It must be no stock information.
2) ESTO: stock in warehouse of plant
It must be stock information like plant, storage location, sales order, etc
3) ECUS: stock at customer site (no stock in plant)
It must be no stock information because sold already.
Do you have any problem?
Regards
Luke -
How to call set pf-status in 4.6C system ALV report
Hi All,
Am calling set pf-status as
form MAIN using rt_extab type slis_t_extab
set pf-status 'MAIN' excluding rt_extab.
ENDFORM.
and giving that PF-STATUS name in FM
"REUSE_ALV_GRID_DISPLAY"
but in out put my pf-status is not calling.
Its working fine in ECC 6.0 systems.
Can any one help me regarding the same
Thanks in Advance
Regards
SAIPost relevant portion of your code to analyse. No point in shooting arrows in the dark.
-
SET PM WOrk Order System Status to TECO
Good Afternoon SAP PLM Forum users,
Will you please tell me the best method to Technically complete (set system status to TECO) 85,000 PM orders that have system status REL and CNF or PCNF.
Thanking you in advance
LeslieHi,
You could use IW38 to select and generate a list of orders. Then from the output screen highlite a group of orders and choose the complete function.
Also BAPI_ALM_ORDER_MAINTAIN method TECHNICALCOMPLETE could be used with later releases.
-Paul
Thread moved to EAM forum -
System status field table name
Dear all,
I required help from all of you for finding the table name for system status of equipment
Thanks
RaghavHi,
JEST - Individual Object Status
JCDS - Change Documents for System/User Statuses (Table JEST)
TJ02T - System status texts
TJ30T - Texts for User Status
To access jest/jcds use EQUI-OBJNR.
Regards,
Maria João Rocha -
hi all,
I want to chang the equipment system status to equipment at custome site, how to do this please guide me,
thanks
Amit ranjanhi,
check these transactions.
IA02 Change Equipment Task List
IB02 Change Equipment BOM
IB05 Change Equipment BOM Group
IB08 Change Equipment BOM - Plant Alloc.
IE02 Change Equipment
IE05 Change Equipment
IE06 Change Equipment
reward points if hlpful.
Maybe you are looking for
-
bought your Webcam Live Ultra and began the software installation. I read the entire EULA. During the installation, my security software set multiple alerts because your installer was attempting to modify my security settings and change my browser. T
-
Document is not tagged???
Ok so the basics are if you have alt tags, document structure, tab order etc... but when converting the document to PDF some of those things go away easy fix is to open the newly created pdf in Acrobat Pro and go to Accessibilty-->Add Tags to Documen
-
Hello, I got ipad 3 I can't hear anything withou headphone
-
May have overlooked it, but is there anyway to have a lightbox open on page load rather than just on a trigger? Thanks for any help!
-
Premiere 7 - stereo sound exports without one audio channel
Hi there. I have a strange problem with Adobe Premiere 7.0. Every time I export a wideo it looses one audio channel - the right one. I have no idea why. I have a stereo audio file in my Timeline and it plays in stereo during editing. I choose stereo