Set the default printer setting to landscape in Excel

Hi,
Is it possible to set the default printer setting to "1 page wide" and "landscape" whenever the user clicks print in Excel? I am trying to create an Excel report using XML and XSL. Though the report is created, I am not sure if I can control the printer page setting for MS Excel. Kindly let me know if its possible. If so, how can it be done? its kind of urgent.
Thanks

Your question was posted in the wrong forum.

Similar Messages

How do I set the default print margins for ALL printers in mozilla.cfg

How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.

Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
If you can figure out how to add the printer name, this can be used to lock the margins.

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

Hi,
Try saving your settings as a Preset by clicking the Preset drop down and then select Save Current Settings as a Preset.
Next try changing the settings by selecting the saved preset.
That allow saving the settings for a specific printer, I assume it may also allow selecting these settings for another printer.

Can not set the default printer

Hello,
we have HP LaserJet Pro MFP M125-M126 PCLmS network all in one printer, as the installation in every user was successful, and was working fine on installation day, after a day all user facing issue like can not set default pritner , can not print, all user are facing issue at a time,
prompt reply is appreciated,
This question was solved.
View Solution.

Hi @darshan9 ,
I see that you are experiencing issues setting the default printer for users and you are unable to print over the network.
I would be happy to help you.
Do you mean individual computers setup with the printer over the network users or one computer with multiple users?
Do you have Admin Rights on the computer to make changes?
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
I would suggest you to check if you have a different user account or from an administration account.
I would also suggest you to create a new user account and check if you are able to set the printer as default.
Create a user account. Create a user account.
If you are still having issues run the Fixit Tool. Diagnose and fix printer and printing problems automatically.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

The default print setting on my officejet 4620 is the fax.

The default print setting on my officejet 4620 is the fax. I can find no option to select the print option as the default in the control panel or any other menu. Thanks.

These may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02762273&cc=us&dlc=en&lang=en&lc=en&product=519...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lang=en&lc=en&product=519...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Laserjet Pro P1606dn running on a dell using XP Pro won't hold the default printer setting

Laserjet Pro P1606dn printer
OS is XP Pro
set it as the default printer but that setting keeps changing
How to fix this?
thanks

Yes, you need your own copy of WinXP (I used the one that came with VPC) but I'm afraid I have some good news/bad news to report. The good news is that WinXP does run a bit faster than VPC did on my dual processor G4 - the bad news is that XPs hardware detection DOES NOT - and I could find no way t force it - to recognize any USB or Firewire devices. Because I use Windows primarily to connect to USB GPS devices, this was a real letdown (and would be to users who need to, oh, I don't know, PRINT from Windows).
I'd love to hear from anyone has Windows actually functioning under OpenOSX Wintel - the website only goes as far a getting it to install and running Explorer (which I was able to do). I also had numerous keyboard problems: sometimes Windows would accept no input from the keyboard, sometimes it would reverse the caps lock key (on produced lowercase letters, off all uppercase). It also does not recognize the Apple Mighty Mouse as a two-button mouse. A number of these problems were - somehow - fixed by VPC which I never had a problem with when it came to USB devices (at least it DOES recognize a 'network card' and I can use Internet Explorer - whoopee!).
I'm going to play with this some more before throwing in the towel but I'm not so certain that I'm going to work towards the dual boot solution until I hear that Windows and Windows apps actually function - like being able to print or recognize a USB device.
Just getting Windows to install and run is of little good if it doesn't actually provide simple functionality.
I may copy and paste my original post in the Windows compatibility forum - see if any of those folks have found a working solution,

I am needing to set the DEFAULT Print to be ACTUAL SIZE not FIT. I need this to be the DEFAULT SETTING for the program.

I have a couple users using Acrobat XI Pro and when they print a PDF it is shrunk to 96.08%. I need to find a way to set the DEFAULT Setting to be Actual Size. We are a Law Firm and the Document Numbering is being cut off from the docs due to the Shrinking.
Has anyone had any experience in changing the DEFAULT settings of the Print Window? Can you please pass along any knowledge on how to accomplish this? Thanks for your time and replies.

Acrobat and Reader's Fit and Scale functions are "sticky".
From the Print Dialog > Page Size & Handling
Any option you choose will remain active for all subsequent documents.
(Some features remain active until the program is quit/restarted)
Choose Actual Size
Do not change the selection, it will retain the setting.

Adobe PDF installed and set as default printer causes incorrect pagination in Excel

I have come across an interesting bug. When Adobe PDF is installed and set as the default printer, Excel produces incorrect and inconsistent pagination--in my case one of the sheets is printed to two pages wide rather than three it should be (when Adobe PDF is not installed), resulting in 9 printed pages instead of 11. I have created a test case to reproduce it.
The sample file is located here: goo.gl/ZBiWj
The test case is here: goo.gl/6KbrO
Instructions are given on how to reproduce the error. The same error occurs when printing the sample file to Adobe PDF as a printer. Any ideas on how to resolve this?

Actually, the problem isn't really Acrobat or the Adobe PDF PostScript printer driver instance at all. The problem is that Microsoft Excel as well as other Microsoft Office applications adjust their printed output based on the characteristics of whatever is chosen as the current printer. This has been an issue since the earliest days of Windows.
Each printer driver instance contains information about the specific printer including but not limited to page size, duplex capability, paper types, page orientation, output trays, imageable area (i.e., page size less unprintable margin areas), and device resolution. Based upon what Excel finds as values for a number of these characteristics, Excel will format the page differently. Excel is particularly sensitive to not only page size, but also imageable area and device resolution. Imageable area is important because Excel is attempting to avoid printing at all on parts of the page that your printer cannot possibly image; this is typically about one quarter inch around for most laser printers, a bit less for inkjet printers unless you have a printer that claims edge-to-edge print capability.
The Adobe PDF PostScript printer driver instance has imageable areas that exactly match page size for all available page sizes. Thus, Excel formats on the basis that it can print all the way to edge of the page unless you set margins otherwise. It also defaults to 1200dpi. Change the device resolution to another setting via printer properties and you will likely see relayout. These same issues occur with Word and to some degree with PowerPoint.
There is absolutely nothing that Adobe can do about this. The same problem is exhibited if you have access to multiple different printer models with different characteristics on your computer and you change from one to another, even if you don't have any Adobe software loaded on your system. Users have complained to Microsoft for years about this issue, but they typically have not considered this an important issue to tackle (ribbon user interfaces are obviously much more important).
Sorry, but not anything we can really do to help you here other than to advise you to always compose your Microsoft documents with the current printer being the Adobe PDF PostScript printer driver instance, create a PDF file, and then print that from Reader/Acrobat to your real target printer. Alternatively, if you are very careful to setup the print characteristics of a spreadsheet to have large enough margins and headers/footers outside what would be the target devices non-printing area, you might get a bit better device independence - but don't count on it.
- Dov

How can I set the default saving setting in Acrobat 9 to Acrobat 1.4 Compatibility

How can I set the default saving in Acrobat 9 to Acrobat 1.4 Compatibility...
My imposition program requires 1.4 compatibility - it handles files from acrobat 8 perfectly - however to use from 9 i have to re-postscript and redistill.
Ive tried saving as optimised but it doesnt always work.
I cant seem to find anything in the settings to change it....
Can anyone enlighten me please??
Paul

fatdouglas wrote:
Ive tried saving as optimised but it doesnt always work.
I cant seem to find anything in the settings to change it....
Can anyone enlighten me please??
Paul
In your Optimize settings if you set it to "Make Compatible with Acrobat 5.0 or Later" it will bring it down to PDF 1.4

How do I set the default printer to pdf in Firefox 8?

Wish to set default printer to PDF, in specific folder.
Always tries to print to .ps in my home folder.
Using Linux, Fedora 16. I have had the same problem in Fedora 14.

Mark, there's a very basic .NET method on every nullable object:
GetValueOrDefault
EDIT: Now I see...please avoid duplicating
questions...
To be clear:
Put GetValueOrDefault on every nullable field used inside your 'TotalDue_Compute' sub
You don't need to define 'TotalDue' as Nullable anymore

How do I set the default print pref to fast draft on a Photosmart C410 w/o using a PC?

I have a Photosmart C410 for printing from my iPad. I want to set the print preference to print "fast draft" instead of the "normal" default. Can I do this from the printer itself rather than from a PC connected to the printer?

Hi ngrammes!
If you are using AirPrint (printing directly from the iPad) there is unfortunately no way to change the print settings at this time. AirPrint is a fairly new service of Apple's that our printer's support and they may add more features with newer versions of the iOS.
Let me know if this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Deploying printers with gpp cse to computers and setting the default printer results in this error

The computer printername preference item in the 'Printer deployment' Group Policy object did not apply because it failed with error code '0x80070709 The printer name is invalid.' This error was suppressed.
I've read that this is a timing issue does anyone have any thoughts on this

> The computer printername preference item in the 'Printer deployment'
> Group Policy object did not apply because it failed with error code
> '0x80070709 The printer name is invalid.' This error was suppressed.
As in your other thread: There is no default printer for computers, so
your XML hack "might" produce the expected result or it - as in this
case - doesn't.
> I've read that this is a timing issue does anyone have any thoughts on this
If it IS a timing issue, enable
http://gpsearch.azurewebsites.net/#1839
and configure
http://gpsearch.azurewebsites.net/#319 to 60 or 90 seconds.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

How to set the default print format for the report

Hi,
In ALV report , i want to defalut specific print format and printer for background processing .
Any clues!!!!!!!!!
Regards
Swatantra

Hi
Please check below code:
DATA: PRIPAR TYPE PRI_PARAMS,
      ARCPAR TYPE ARC_PARAMS,
      LAY    TYPE PRI_PARAMS-PAART,
      LINES TYPE PRI_PARAMS-LINCT,
      ROWS   TYPE PRI_PARAMS-LINSZ.
DATA: val(1).
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    destination            = 'LOCL'   " <--- Printer Name
    no_dialog              = 'X'
    immediately            = ' '
IMPORTING
    out_archive_parameters = arcpar
    out_parameters         = pripar
    valid                  = val
EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params   = 2
    invalid_archive_params = 3
    OTHERS                 = 4.
IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*** Specifying the page formats
    pripar-linct = 65.
    pripar-linsz = 190.
    pripar-paart = 'X_65_132'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    in_archive_parameters = arcpar
    in_parameters          = pripar
    no_dialog              = 'X'
*      list_name              = 'Testing Purpose Only' "l_list
IMPORTING
    out_archive_parameters = arcpar
    out_parameters         = pripar
    valid                  = val
EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params   = 2
    invalid_archive_params = 3
    OTHERS                 = 4.
IF sy-subrc EQ 0.
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
ELSE.
write:/ 'Unable to create spool'.
ENDIF.
So now a spool is created with the required print parameters...
The list that is created from here will be in the spool.
Once the list is completed, close it with NEW-PAGE PRINT OFF.
Hope this helps.
Regards
Eswar

Setting new default printer from tcode VF

Hi friendz,
im here again..:-) hope u dont mind..
i have a problem in setting the default printer in tcode VF02...actually the scenario is we bought a new printer..and the program in billing documents always default it to the old printer...so i tried to change the printer from old to new.
and tried to change the default printer thru the following :
1.change the new default printer from settings->printer
2.change the output in VF02 tcode from GOTO->header->output->communication method
3.change it from billing document->issued to output ->print options.
but all of these is i need to change it per document no...
now...how will i default it only once..and all documents i my print will default the printer to the new printer..
do you have any idea to change the default printer to SPRO? because i check the output type is rd07...and i have no idea where to change it...
Please help:-(
aVaDuDz

u havnt seen my reply to ur POST ?
in SPRO -
>under Output determenations --> u will get a options to maintain printers as per Output type.
i forgotten directly path to go inside.
VOPA something like this.
Regards
Prabhu

Setting up default Printer

Hello Experts!,
I am working on the Crystal Reports XI and have a couple of questions about printers.
1. How to set the Default Printer to a New Crystal Report ?
2. How to check the default printer for an existing report ?

Hi Aaron,
To set the Default Printer to a New Crystal Report
Click on File Menu -> Page Setup... -> Printer Options Click on Printer button
In the same way you can check the default printer for an existing report.
Regards,
Shweta

Set the default printer setting to landscape in Excel

Similar Messages

Maybe you are looking for