Set the PATH permanently windows vista 32-bit
I need to set the PATH variable permanently for running JDK without specify the full path to the executable every time with windows vista 32-bit but I don't know how to do it. Someone can help me?
I tried what this site said but it doesn't work (or I do it wrong)
http://java.sun.com/j2se/1.5.0/install-windows.html
hi,
via setting environment variables
steps for windows 2000, but you to try the same in vista also, may be steps only differ,
place your cursor on my computer -> right click -> properties -> advance -> environment variables -> system variable -> path->edit
add " ;drivename:\path "
ex:
;c:\jdk1.5.0\bin
Similar Messages
-
Setting up iTunes on Windows Vista 64-bit
Make this a sticky please, I dont want to type it twice
In the 64-bit versions of Windows there are two locations for programs to be stored by default.
Program Files - All the 64-bit applications that can run with out any assistance from the 32-bit emulator.
Program Files (x86) - All the 32-bit applications that need the 32-bit emulator to help then run under the 64-bit versions Windows.
Problem
When installing the latest version of iTunes (7.3.1.3) on Windows Vista 64-bit the install of the QuickTime software completes successfully, however when the iTunes software tries to install the application it produces an error message saying that it cannot find the QuickTime installation.
This is happening because QuickTime software is getting installed in the Program Files (x86) since it is not a 64-bit application. And the iTunes application specifically looks for it in the Program Files directory. I don’t know why the Apple iTunes programmers thought hard coding a path was a good idea, because they definitely could have looked up the install directory in the Windows Registry. As every programmer knows and has been slapped on the wrist by a more experienced programmer you should never hard code possible variations to your program. Especially if it is a hard drive path, because a non-standard install of QuickTime would lead to the same problem.
Solution
Basically the solution is very easy and involves a new feature in Windows Vista called a symbolic link.
1) Open up the Command Prompt as an Administrator (Go to All Programs > Accessories and Right Click on Command Prompt and then choose Run as administrator)
2) Create a QuickTime folder in both Program Files (x86)
mkdir "c:\Program Files (x86)\QuickTime"
3) Now we create a symbolic link to the Program Files directory
mklink /d "c:\Program Files\QuickTime" "c:\Program Files (x86)\QuickTime"
4) Now install iTunes as you normally would by double clicking on the install program.If that didnt work try this below:
1) Open up the Command Prompt as an Administrator (Go to All Programs > Accessories and Right Click on Command Prompt and then choose Run as administrator)
2) Type cd C:\Windows\SysWOW64
3) Type regsvr32 vbscript.dll (This registers VB Script with your computer.)
4) Now install iTunes as you normally would by double clicking on the install program and wait for iTunes to finish installing.
5) Type regsvr32 \u vbscript.dll (This unregisters VB Script with your computer.)
THIS ONE COMES WITH A WARNING
TRY BOTH OF THESE AT YOUR OWN RISK
AND some thing below to consider about this second step, not the first post
To enabled, VB Script a scripting language that has been responsible for more trojan and worms floating around the internet than any other on the face of this earth. All in order to install one of the earths most popular programs to get our daily audio fix. So we have to disable security measures built in to protect the operating system from malicious code and leave our selves wide open.This would be the equivalent to Microsoft telling Mac People to disable buffer overflow protection in order to install Microsoft Office for the Mac. -
Hello,
I'd like to run my java application on a computer with Windows 98, and not in the java bin directory. I'm familiar with setting the path variables in Windows XP. You go to control panel -> System -> Advanced -> Environment Variable -> and set them as you like. In Windows 98 there seems to be no such method. Instead I'm hacking away at the autoexec.bat file, but I still can't seem to get it to work. Currently, this is what my autoexec.bat file looks like:
REM [Header]
@ECHO OFF
REM [CD-ROM Drive]
REM c:\windows\command\mscdex /d:gem001
REM [Miscellaneous]
REM [Display]
REM [Sound, MIDI, or Video Capture Card]
REM [Mouse]
c:\windows\cwcdata\cwcdos.exe
PATH=c:\Program Files\Java\jre1.5.0_01\bin;c:\Program Files\Java\jdk1.5.0_01\bin;
CLASSPATH=c:\Program Files\Java\jre1.5.0_01\bin;c:\Program Files\Java\jdk1.5.0_01\bin;
I put the path to both the JRE and JDK in both the PATH and CLASSPATH variables just to be sure. From a DOS prompt, the "java" command seems to work from anywhere, but the "javac" command still only works in the bin directory. Can any think of where I'm going wrong?This is copied from the installation Instructions for the product you downloaded. (Note the use of quotation marks - eithr do that or uses the 8.3 format of the directory name)
Microsoft Windows 98 - To set the PATH permanently, open the AUTOEXEC.BAT file and add or change the PATH statement as follows:
Start the system editor. Choose "Start", "Run" and enter sysedit, then click OK. The system editor starts up with several windows showing. Go to the window that is displaying AUTOEXEC.BAT
Look for the PATH statement. (If you don't have one, add one.) If you're not sure where to add the path, add it to the right end of the PATH. For example, in the following PATH statement, we have added the bin directory at the right end:
PATH C:\WINDOWS;C:\WINDOWS\COMMAND;"C:\PROGRAM FILES\JAVA\JDK1.5.0_<version>\BIN"
Capitalization doesn't matter. The PATH can be a series of directories separated by semi-colons (;). Microsoft Windows searches for programs in the PATH directories in order, from left to right. You should only have one bin directory for a JDK in the path at a time (those following the first are ignored), so if one is already present, you can update it to jdk1.5.0_<version>.
To make the path take effect in the current Command Prompt window, execute the following:
C:> c:\autoexec.bat
To find out the current value of your PATH, to see if it took effect, at the command prompt, type:
C:> path -
Windows Vista 64-bit - ITunes died and won't reinstall
Last night my wife let her laptop battery run dry with itunes 10 open. We had just installed it a week or so ago, and had not updated from the online download version.
Anyhow, afterward, when I tried to open iTunes, MS would pop up with a message that the program failed to open properly. The laptop is Windows Vista 64-bit with the 64-bit software.
I uninstalled, restarted, reinstalled, restarted, and tried again. Seemed to install correctly, but still got the crash when attempting to open.
Tried QuickTime, it also will no longer open. Uninstalled both, and no when I try to install iTunes, it goes through the gathering information process of the install, but then pops up with a window saying the installer encountered errors before iTunes could be configured.
I downloaded Windows Install Utility v. 3, but it shows iTunes and QuickTime completely removed (at least no entries were in their to remove).
I also redownloaded the iTunes .exe, with the same results. Even tried the 32-bit, heh, which obviously didn't work, but worth a shot I suppose.
Any help at all would be greatly appreciated.
I did a backup of the registry and went through and hard delete most of the iTunes entries, with no success, so I just restored the registry to the original since I wasnt 100% sure that I should be doing that.Below are the two most recent problem reports for each of the three programs. No other programs had any recent problem reports. One interesting thing, from the time stamps, there are no crash reports from the last few iTunes install attempts which were giving the message from above and the latest attempt where it just flickers then doesn't do anything else.
IE:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 8.0.6001.18999
Application Timestamp: 4ccf9787
Fault Module Name: mshtml.dll
Fault Module Version: 8.0.6001.18999
Fault Module Timestamp: 4ccfaef1
Exception Code: c0000005
Exception Offset: 00000000003d4d5f
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 7fa8
Additional Information 2: ad011ba5f87a70fa4fcf99fe53ccc471
Additional Information 3: 184a
Additional Information 4: 5b6bac566010931808e4f5f3b58e54e6
Files that help describe the problem (some files may no longer be available)
Version.txt
AppCompat.txt
minidump.mdmp
Problem signature
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 8.0.6001.18999
Application Timestamp: 4ccf9787
Fault Module Name: mshtml.dll
Fault Module Version: 8.0.6001.18999
Fault Module Timestamp: 4ccfaef1
Exception Code: c0000005
Exception Offset: 00000000003d4d5f
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 7fa8
Additional Information 2: ad011ba5f87a70fa4fcf99fe53ccc471
Additional Information 3: 184a
Additional Information 4: 5b6bac566010931808e4f5f3b58e54e6
iTunes:
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.1.0.56
Application Timestamp: 4ce4a7b6
Fault Module Name: QuickTimeCapture.qtx
Fault Module Version: 7.68.75.0
Fault Module Timestamp: 4c87d2a0
Exception Code: c0000005
Exception Offset: 0003c759
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.1.0.56
Application Timestamp: 4ce4a7b6
Fault Module Name: QuickTimeCapture.qtx
Fault Module Version: 7.68.75.0
Fault Module Timestamp: 4c87d2a0
Exception Code: c0000005
Exception Offset: 0003c759
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Problem signature
Problem Event Name: BEX
Application Name: QuickTimePlayer.exe
Application Version: 7.68.75.0
Application Timestamp: 4c87ca48
Fault Module Name: QuickTimePlayer.dll
Fault Module Version: 7.68.75.0
Fault Module Timestamp: 4c87ca3f
Exception Offset: 00005b6d
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: ce18
Additional Information 2: 51a1821df37b716a5bcc7d3a608fd9cc
Additional Information 3: a5e1
Additional Information 4: c197509b4c5823cbbe47ce2e6aea41fd
Extra information about the problem
Bucket ID: 1370383568 -
Windows Vista 64 bit w/older 2 dual core 3.0ghz Mac Pro with NVIDIA 7300
I have read a variety of the posts that have appeared here on the use of Windows Vista 64 bits on a Mac Pro. I remain confused, and but want to do this. I have a Mac Pro purchased in the Spring of '07 with dual 3.0Ghz dual core Xeon cpus and 10gb of ram, using the NVIDIA GeForce 7300 GT and running 10.5.1, with multiple drives. I want to run the 64 bit version of Vista Ultimate to use my ram, and to gain the performance this box should offer. It appears that I have three options:
1. Boot Camp: I don't know if the drivers are available, seems like the new Mac Pro drivers probably would not work, even if I could find them, since I have an older Mac Pro with a pair of the dual core Xeon CPUs. Don't know if there is an alternate source than Apple for the drivers, or a way to get around the problem in boot camp.
2. Parallels: I do not believe that 64 bit apps are supported by Parallels
3. Fusion: Their web site says they support Win Vista 64 bit, but it is not clear to me on the web site where the drivers are obtained, or perhaps they are built in to Fusion. Will I get the performance and memory benefits in fusion? Or is the OSX virtual overhead so high that this is a fools errand?
I do a lot of video editing, and fully 95% of my life is in the Mac world, but I have individuals who send files for editing, and occasionally they require Windows tools, much to my chagrin. I also have a small number of programs that need Windows 64. I occasionally am required to do some development work, and would like to use this machine for that purpose if it can indeed run Win Vista 64bit. I have XP loaded on a more modest box andit is running fine when I need it, which isn't very often.
Any help, or successful experience in running Windows Ultimate 64 bit on this hardware, utilizing its resources would be greatly appreciated.Here are my results after further digging online and from my own experience.
Here is the procedure:
1. Check whether your Mac has the 32-bit EFI or 64-bit EFI
http://www.ihackintosh.com/2009/08/snow-leopard-106-and-64-bit-what-you-need-to- know/
2. Create a Boot Camp (BC) partition for Windows 7 x64. Resize the partition size using the slider in the BC app. Follow the instruction, insert the Windows 7 disk and reboot.
3. This will load the PC partition which is FAT formatted for now. Choose the Boot Camp partition on which to install Win 7, but choose in the option to format that partition. It will automatically format it in NTFS. Otherwise, it will not install on that partition.
Note : A "OEM System Builder" Windows 7 64-bit Professional UPGRADE install without any issues what so ever. The upgrade disk is a full install. Read this for further information:
http://www.pcworld.com/article/174288/windows7_upgrade_madecheaper.html
4. Run windows, then insert the Snow Leopard disk. It will tell you your hardware cannot support x64 version. Do the following procedure to manually install the driver:
http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22%3Aq boot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7%3Ahow-to&l ang=en
5. Then update Boot camp using Apple Software Update in Windows.
6. All hardware works fine except the sound. The sound only comes out of the internal speaker, even when headphone or speakers are plugged in the jack. Installing the Realtek High Definition Audio Codecs driver in order to fixe the problem. Shutdown and reboot to make it applicable. Try a second time if it still does not work:
http://218.210.127.131/downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=24&Le vel=4&Conn=3&DownTypeID=3&GetDown=false
That's it. -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?
Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.
-
i am trying to download itunes 10.7. i have windows vista 32-bit. when i click on download. the pop up window comes up and ask to save or cancel, and then the webpage says thank you for downloading. it hasn't downloaded it. what can i do to fix this?
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
please help. my pc is a hp with windows vista 32 bit. I can't install itunes 10,5. I have try to remove my old itunes and reinstall but it didn't help. I have install itunes 9.1.1 but the itunes library can't be read because it is on a new itunes. I hope someone can help. I'm lost.
Deauthorize all of your computers and authorize the computers you use.
http://support.apple.com/en-us/HT6283
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Best. -
I have tried to download FireFox 4 and earlier versions from several different website, thinking the files might have gotten corrupted, and each time I download the file the exact same thing happens, the file downloads and the file gets extracted but when the extraction completes the small window dissappears and nothing else happens.
My machine is a Windows Vista 64 bit system and I've tried downloading the file with my 32 and 64 bit Internet Explorer but nothing seems to work. Can someone help me please because I would love to be able to completely delete I.E.Hi, thanks for your Flash file info. Well you must have been doing it right, since all of your Flash files for IE and FF are correct.
The SWF plugin for FF and the SWO for IE are also correct.
You shouldn't be having any problems with Flash Player.
What you can try is to turn off the hardware acceleration feature. Go to any video, like youtube and right click on the video and click on Settings. Display Settings is where you will UN check hardware acceleration.
See if that helps. Let me know.
Thanks,
eidnolb -
How to set the path variable on Windows ME?
I want to get a friend of mine to start using java the only problem is that we both dont know how to set the path variable in Windows ME. I cant seem to find any instructions on it for ME. So if someone could please tell me how or give me a llnk to directions for Windows ME. Thanks.
Refer to the Installation Instructions for the package that you installed - I believe #5 if the instructions has the information. A link to the instructions is at the page you installed from.
-
Set the path and class path in windows xp professional
hi guys....could any one tell me step by step on how to set the path and classpath on windows xp professioanl? This is my path and classpath
set path = %path%;C:\jdk1.3.1_02\bin;c:\JOpen672.jar;c:\
set CLASSPATH = c:\j2sdkee1.3.1\lib\j2ee.jar;c:\JOpen672.Jar;c:\;c:\postgresql.jar;c:\jai_core.jar
not working please help me on this thanks alot.
noviceproBelow is a Helloworld program, copy and paste it into your editor and save it as "HelloWorld.java" Use capitalization, Java is case-sensitive. If you're using Notepad, quote the name when saving, otherwise Notepad adds ".txt" to the name. Go to DOS and check that you've got the file where you want it and that it's named correctly.
----------program HelloWorld.java--------------
public class HelloWorld {
public static void main (String[] args) {
System.out.println("Hello World!");
In the same directory as HelloWorld.java, enter "javac" - the program should print out a list of options, if not, set your PATH - see below.
In the same directory as HelloWorld.java, enter "javac HelloWorld.java" and the javac compiler will create HelloWorld.class. If it was successful it will not give any messages. Check that the file is created.
In the same directory as HelloWorld.java, enter "java -cp . HelloWorld" with the spaces and the period. The program will run.
Here is additional information:
The Path is a set of pointers that Windows uses to locate programs that you execute, like javac.exe and java.exe. This setting is explained here:
http://java.sun.com/j2se/1.4/install-windows.html
Scroll down to: 5. Update the PATH variable
(you should have already done this as part of the s/w installation)
The CLASSPATH is another set of pointers that is used by Java to find the files that you create and want compiled and/or run. This setting is explained here:
Setting the Classpath:
http://java.sun.com/j2se/1.4/docs/tooldocs/windows/classpath.html
[NOTE: always start your classpath with ".;" which means the current directory. See my classpath, below]
How Classes are Found:
http://java.sun.com/j2se/1.4/docs/tooldocs/findingclasses.html
Examples:
This is my path
PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;C:\BATCH;C:\J2SDK1.4.0_01\BIN;C:\PROGRA~1\UTILIT~1;C:\PROGRA~1\WIN98RK
This is my classpath
CLASSPATH=.;C:\mjava;C:\mnrx;C:\NetRexx\lib\NetRexxC.jar;C:\j2sdk1.4.0_1\lib\tools.jar;C:\NetRexx\NrxRedBk -
I have Windows Vista 64-bit. I can't play on-line games on Pogo. I already contacted Pogo & they told me to update flash player. Firefox disabled by plugin for flash. I can't get the most updated Adobe flash player because it doesn't support 64-bit.
See:
* http://kb2.adobe.com/cps/000/6b3af6c9.html -
I am attempting to download LIGHTROOM on my PC. I receive the message "running an operating system that LIGHTROOM no longer supports". I currently use Windows VISTA 64 bit. Need Heip. Suggestions?
Hi William. Unfortunately, Vista is not a supported OS for Lightroom 5 or Lightroom 6. You'll need Windows 7 or later. See here: System requirements
-
I'm running windows vista 32 bit and the dep shuts down my itunes
I'm running windows vista 32 bit and windows DEP shuts my itunes down as soon as it begins to load. Help?
"the registry settings used by the itunes drivers for importing and burning cds...."
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
Maybe you are looking for
-
Universal Spell Checker doesn't work.
For some reason my universal spell checker wont work. I am using TextEdit, where it worked fine until recently. Is anyone else having this problem? And yes, I checked ON the appropriate function in the menu. I am on a MacBook Pro with the latest OS (
-
Apple LCD Keeps flickering a balck screen while coneected to my Powerbook
I have attached my apple 24inch LCD screen to my Mac Powerbook and the LCD keeps flickering a balck screen in intervals. Can any one help?
-
Apps updated on PC in iTunes not getting transferred to iPhone or iPad--problem solved!
Ever since iTunes 11 came out the apps that I updated thorugh the iTunes store on my PC were not being transferred automatically to my Iphone or iPad during the syncs; my devices would still show the red number next to the App Store app, indicating t
-
I got a network printer connected to a Time Capsule which extends my wireless home network. But I can't manage to find out it's IP address nor i manage to find it on the network ! Am I doing something wrong ? Is there a way to tell Time Capsule which
-
Hello all, I have a strange issue here. When I use dynamic parameters for my Customer account number CR takes forever to load. I mean forever!! I have ran the report at 15:45 and at this time it is 15:59 and still the parameters are not loaded. If I