Set the redirect page when SSO failed

Hi,
We have LC 2.5 with the SSO enabled.
When users failed to login via SSO, it seems that the system will re-direct to /um/login.
Is it possible that we could configure the behaviour so that
1. when user click the task notification, it will try the SSO and go to the workspace of that task
2. if user failed to login via SSO, can it rediect to the /worksapce/main.html page, they can input their user name and password for authentication ?
Thanks

Hi Shashank,
We have modified the ui of the workspace, however, the source_url and logoin_url remain unchanged (i.e. /workspace/Main.html).
we have run a capture on the redirect behaviour
item 5-20 is the redirect flying around,
and item 21 we input the URL input in the browser explicitly, and it could show the page and the same user can login successfully, this make us really difficult to find out why it would happen.
Regards,
Janice

Similar Messages

How do I set the default page when I select "+" for a new tab? Right now it defaults to Yahoo search and I want to set it to my Speed Dial page. I did have the default page set to Speed Dial but I can't find anywhere how I did it in the past.

You can set the homepage for opening tabs, but I can't find the setting for designating what page opens when I hit the + button on tabs.
This is the page that loads:
http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20100937,6693,0,16,0
How did Yahoo embed this in the Tab settings?

Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend

How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend the scale is reset to 1 = 1.

Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG

How do I set the Home Page for a newly open tab using the File Tab Menu??

When I open a new tab, is there a way to set the home page the new tab will use when it is opened, or will new tabs always be opened as blank pages?

I have new windows opening when I click on a link. Or when I click on the FF-Icon. New windows are the default setting.
When a new window opens, I get a Google home page and can instantly type in a search phrase.
With the above in mind, sometimes I want to keep search classes in the same window. In a sense I'm using the Window with no tabs, to generate a tab by using the File Tab option.
When a Tab is selected where new windows will launch a new page, and not a new tab, the process of forcing a new tab onto the window will produce a tab page that is Blank, and the new tab label description displayed in the tab area shows the words "New Tab". That tab's URL address bar is blank. Zip - nothing displayed.
When a blank page tab appears, I click on the HOME button you helped me remodel, and the "New Tab" description in the tab label area changes from "New Tab" to "Google".
My question was to ask, if there was a way I could do something to make FF4 do that Home page assignment on its own. In the early FF days I found you could sometimes go into the bowels of FF, find some form of INI or SETTINGS type file, look for a Keyword reference that would tell FF to do something different, and Viola, emotional issue resolved. In this case, I'm trying to "Gild the Lilly" by asking if you, or someone else might have a rabbit they can pull out of their hat, just like you did when you helped me move my Home button, and have that rabbit show me how to do something that default FF-Options section doesn't support.
Did I do a better job of explaining the issue this time?
Thanks again for the response.
When I

Troubleshoot-Adapter engine:Error Setting the message status to DLNG failed

Dear Experts,
We use SAP RFC- PI-JDBC(MSSQL). here the Data(message) successfully transfered to mssql table but the status is been set to DLNG failed, And it finally shown as SYSTEM ERROR.
QoS required: ExactlyOnce , here The Message has got inserted in that particular table and in PI adapter the status turned to DLNG faild and the service again tries to send the same message which is not possible becoz the data is set for primary value.
2010-09-15 09:59:48 Success Message successfully received by messaging system. Profile: XI URL: http://XXXXX:50000/MessagingSystem/receive/AFW/XI Credential (User): YYYY
2010-09-15 09:59:48 Success Using connection JDBC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2010-09-15 09:59:48 Success Message successfully put into the queue.
2010-09-15 09:59:48 Success The message was successfully retrieved from the receive queue.
2010-09-15 09:59:48 Error Setting the message status to TBDL failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 09:59:48 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 09:59:48 Success MP: Entering module processor
2010-09-15 09:59:48 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 09:59:48 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 09:59:48 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 09:59:49 Success Database request processed successfully
2010-09-15 09:59:49 Success MP: Leaving module processor
2010-09-15 09:59:49 Success The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2010-09-15 09:59:49 Error Setting the message status to DLNG failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 10:37:01 Success The message was successfully retrieved from the receive queue.
2010-09-15 10:37:01 Success The message status set to DLNG.
2010-09-15 10:37:01 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 10:37:01 Success MP: Entering module processor
2010-09-15 10:37:01 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 10:37:01 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 10:37:01 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
Thanks in advance for your valuable answer.

Hi Vinaygam,
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
See above error, It cannot the Duplicate Key in your log table. Duplicate means repeated as a same data.So kindly check once your data.
IF,I assume your scenario is Synchronous, If you are using any sender JDBC adapter just check with your Quality of Service and set it to "Exactly once".
so kindly do it.
Thank you,
Sateesh
Edited by: sateesh kumar .N on Sep 17, 2010 8:17 AM

Modifying the redirect page of an input behavior

I created a user input behavior for a user registration page.
I also added a check new username behavior. It all works well. The
problem isn't really a big problem because it all still works. But,
it would be nice if I could modify the code that Dreamweaver
generates and NOT get the red exclamation error next to the
behavior in the behaviors panel. That way I could still click on
the behavior and be able to edit it with the dialog box instead of
hand coding it.
Here is the deal. In the input behavior, I specified the
redirect page. The code written by Dreamweaver is:
MM_editRedirectUrl = "login_confirmation_send.asp"
Problem is, I want to pass a form value in the query string
to that redirected page. So, I modified that code to say:
MM_editRedirectUrl = "login_confirmation_send.asp?email="
& Request.Form("email")
When I do that, I get a big red exclaimation next to the
check new user behavior which says the input behavior has been
deleted. Eventhough, it still works fine.
Is there a way to modify the code without getting the
error?

MM_editRedirectUrl = "login_confirmation_send.asp?email="
MM_editRedirectUrl = MM_editRedirectUrl &
Request.Form("email")
That might do it. Does ASP have another concatenator besides
ampersand(&) like the plus sign(+) that you could use? Also,
I've totally forgotten if you need semicolons(;) at the end of
lines of ASP code.

How do I set the home page for a new tab?

How do I set the web page for when I open a new tab? Whenever I open a new tab it goes to an error site which freezes my firefox browser for a while. How do I change that? I want to open new tabs with google being the home page. I need to set up the homepage for a new tab NOT a new window. Please help! !

If Google is set as your Homepage in Firefox you can middle-click ''(push down on the mouse wheel)'' to open Google in a new Tab.
Or, you can add the feature to Firefox where clicking the New Tab button on the Tab Bar opens your Homepage in a new Tab. <br />
https://addons.mozilla.org/en-US/firefox/addon/new-tab-homepage/
And if you have a different Homepage set, this extension allows for any page you set in the extension's options to open when you use the new Tab button. <br />
https://addons.mozilla.org/en-US/firefox/addon/newtaburl/

Start page lacks menu items - unlike "How to set the home page" view

I have just downloaded the beta of Firefox 4 and am attempting to reproduce opening home page from previous version. Directions on accomplishing this (loading the NY Times front page) depend on a menu bar with "File, Edit, View, History" etc. There are not visible. They are shown in the directions on Firefox Help but not on my computer. How to do this??

Click the Firefox button, then click Options. This will open the options dialog that the [[How to set the home page]] article refers to.
When viewing the support articles, in the right-hand column there is a section titled "Help With:", make sure it is set to Windows and Firefox 4 to get help relevant to the version you are using. In some articles you get different content when you select Firefox 4.

How to achieve SUBMIT for the current page when I click other tab?

Problem: How to achieve SUBMIT for the current page when I click other tab?
Description: I have a two-page application and each page associates with a tab. Say page1 associates tab1 and page2 associates tab2. In each page, I have a submit button, a after submit process associated to the submit button, and a tabular form. For page1, I fill out the fields and hit the button. The page1 will appear again and I can see the data I have insert. However, If I fill out the fields and click the tab2 (page 2) instead. when I come back to page1, the data I filled out are all gone. Is there any way in HTML DB to force the submit in the current page after you click other page. If use JavaScript, what is code looks like.
Appreciate your time and your answer.
Mike

Scott,
just for clarity, if I understood correctly what you said there are two possibilities:
1) keep the standard tab branch and give up the possibility of validating page items. Below you can find an example of such cases.
2) Replace the template substitution string and perform a "custom" button-like submit also adding a branch to the main page associated with the tab. Page items will be validated if the branch firing point is set after the validations.
I couldn't find an example of the latter, but I found easily an example of the former:
it's the "Report attributes", page 420 of app 4000.
If you enter 'aaa' in the "Number of rows" form field and then you press "apply changes", htmldb correctly displays an inline error message saying that the value must be numeric. On the contrary, if you click on the "Region Definition" tab, htmldb takes you to a page showing an oracle exception:
ORA-20001: Error in DML: p_rowid=4785927011172906402, p_alt_rowid=ID, p_rowid2=, p_alt_rowid2=. ORA-20001: Invalid numeric value aaa for column PLUG_QUERY_NUM_ROWS
Bye,
Flavio

HT2518 I reach the stage wher my PC is ready to transfer my mac is on the label page when pressing continue nothing appears to happen

I reach the stage wher my PC is ready to transfer, my mac is on the label page when pressing continue nothing appears to happen

I'm not sure what you mean by "my mac is on the 'label page'"? Once your iMac has been fully set up already, then you can use its builtin feature called "Migration Assistant" to transfer files from your PC over to the Mac. That's the recommended way of doing that.
Hope this helps

Firefox 4.01. I wish to have "Mozila Firefox S tart Page" as Start Page. I have used "How to set the home page" (tools, options, general, restory to default) but no result.

# Numbered list item

The part you are probably missing is
When Firefox starts: "Start my Home page" (in the dropdown)
the installed default home page is about:home in Firefox 4, but simply choose the "Restore to Default",
then click on the "OK".
see [https://support.mozilla.com/kb/How%20to%20set%20the%20home%20page How to set the home page | How to | Firefox Help]
If that is not working then try instructions , and following the instructions suggest taking a picture of your toolbars first, so that you will be able to recustomize your toolbars afterwards, see [http://kb.mozillazine.org/Corrupt_localstore.rdf Corrupt localstore.rdf - MozillaZine Knowledge Base]
After resetting, continue with [http://kb.mozillazine.org/Toolbar_customization Toolbar customization - MozillaZine Knowledge Base] and if you used small icons -- don't forget the checkmark for that in the dialog.

To display the same page when an error occurs.

Hi,
I need to display the same page when an error occurs in the page. For example, I am validating a few fields in a page. If an error occurs, then same page is to be displayed.
I am presently using MVC type programming.
Thanks in advance.
Regards,
Vara

I usually use the Message class, for handling all possible validations. In the DO_HANDLE_DATA, do the validation, and if your validation fails, put your message in the message attribute available for that method. As you have not given a pointer to a new page, it will refresh that same page.
If your validation is successful, go to next page.
In the layout of this page(where you require validation), there is an attribute called page and it has get_message method. Call that method at the appropriate place in the layout.
For more information , refer to :
http://help.sap.com/saphelp_470/helpdata/en/91/b197ce280011d5991f00508b6b8b11/frameset.htm
Web Applications and BSP --> Programming Environment -->
Handling Incorrect Entries
Let us know, if this answered your query.
Regards,
Subramanian V.

Howcan I set the home page for new tabs?

When I open a new tab, it opens up as a blank page. How do I setup Firefox so that the new tabs open in my home page?
''locked by a moderator due to age and that Firefox 13 has a new feature for a new tab''

Thanks, but the problem I'm trying to solve is to get my home page to open automatically when I am already in Firefox and click on the new tab "+" sign to the right of my most recent tab. I have not found a solution to this in the link "How to set the home page" nor in the various help pages on new tabs.

Is anyone else but me get the blank page when trying connecting to itunes store??

For almost a week of trying to solve this i'm giving up.
Aplle custumor service tried to help but failed.
I'm on windows 7 and the latest itunes 10.5.3.
My girlfriend has itunes on mac and it works fine on the same network so what is the problem???

Is anyone else but me get the blank page when trying connecting to itunes store??
Yes, many people are. To fix it, check this guide: iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.

How do I get to the start page when I'm not on it currently? there used to be a buttom for it

I recently updated to version 6.0.2 of Firefox. This version doesn't seem to have a "home page" button. How do I get to the home page when I'm currently not on it? I shouldn't have to press the "backpage" button until I get there or type it in to get there.

You can find the toolbar Home button at the far right end of the Navigation Toolbar.
You can drag the Home button from its current position at the right to the previous position at the left of the location bar if you do not like that new position.
* http://kb.mozillazine.org/Toolbar_customization

Set the redirect page when SSO failed

Similar Messages

Maybe you are looking for