Set time for process chain

Hi,
I have requirement to set maximum time to run the process chain.
For example:
Process chain is starting daily at 10 PM and taking time 1hr 30 min to complete process. Some times it is taking 2-3 hours to complete process.
So I need to set max. time 2 hours to complete process chain. If not completed with in 2 hours (before 12PM), then the process chain should be cancelled.
Please help me in this regard.
Thanks,
Hari

Hi,
you can set the varaiant and schedule the max time in the variant for process chain.For the scheduled jobs in SM37, pls chk this link;
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8009505211d189550000e829fbbd/content.htm
Hope this helps,
Regards
CSM Reddy

Similar Messages

Send Message Process prompting for "Process Chain to Check"

Hi, When I insert a "Send Message" Process into my chain I do get prompted to select the message.
1. When I do a pull down I am getting prompted for "Process Chain to Check".
If I select my current process chain I get an abend.
2. When I click create instead of select I get brought to a table maint "Controls the execution of Process Chains". It has process chain, Start Date, Start time, and an inactive checkbox.
Any guesses why it's asking for "Process Chain to Check"?
What is this maintenence table I'm being brought to just to create a message.
Sounds Like I've run into a bug?????
Can you help???

Found out this must be related to development from a previous consultant..
thanks

Re: Statistics Query for Total runtimes for Process Chain incorrect

Hi Guys,
I am building a Query for Total runtimes for Process Chain Statistics. I used the Cube 0TCT_MC21 for Query - 0TCT_MC21_Q0101.
I dragged in Keyfigure section - startdate, end date, Start time are all correct and fine but the End time (0TCTENDTIM) is coming incorrect. Is something else i should use to get the End time?
Please let me know if any suggestions?
Regards

Just check if the end times are in GMT ?? usually happens with timestamps....

How to delete old schedule time of process chain after changing

I am try to change the schedule time of process chain on production but after changed the old schedule is still working (i.e. every day on 7 am I want change it to 6 am only) ,one process scheduled two time.
I want only last changed. How to remove the older one?
Thanks

hmm wierd...one more thing check if this process chain get trigger by anyother process chain by some abap program or any.
Check the table rspcchain to know if it has any meta chain or not. IF not follow the below steps :
make your process chain trigger based upon the event. Follow the below step.
1.SM64 ---> Create event -
> come to your process chain -> maintain the start variant -> event base---> give that event name here.Now we will be require to create the job which will trigger this event for this.
2.Let us take the below PC as example;
ZL_TD_HCM_004 -- This PC is running after event u2018START_ZL_TD_HCM_004u2019
3.Go to T Code: SM36 Here we define the Background job which will be available in SM37 after saving it.
4.It will ask for ABAP Program to be entered. Give it as Z_START_BI_EVENT and Select Variant from the list. (Based on Process chain, you can select it)
5.Then select Start Conditions and give the start time of process chain. and select periodicity.
6.Save the newly created job in SM36.It will be now available in SM37.
This should solve your problem now .. have fingure crossed
Thanks,
Deepak
Edited by: Deepak Machal on Dec 14, 2011 8:20 AM

Background job is taking lot of time for processing the job.

One background job - which is processing Idocs is processing a job for more than 2000+ seconds.. and completed tho.
But this is happening for the past few days.. is there any way to trouble shoot, or find from any logs of this completed job, to find out why it was taking lot of time for processing.
Can you please tell me the steps of analyzing / trouble shooting why it was taking lot of time daily.
Regards,
Satish.

Hi Satish,
Run DB stat from db13 it will improve the performance.
Check number of idocs. You can send part by part, instead of sending huge data.
Check SM58 logs
Suman

Design Time for Processes and Forms

Hi experts,
When trying to open "Design Time for Processes and Forms" in order to create a process, I get a dump.
Could you let me know what could be wrong ? config? etc..
Hereunder is a sample of what I found in T.code ST22
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
    referenced node must exist
      READ TABLE object_hierarchy_nodes TRANSPORTING NO FIELDS
                 WITH KEY node_id = object_hierarchy_node_wa-ref_node_id
>>>      ASSERT sy-subrc = 0.
    ENDIF.
provider has to be specified (except in case of recursion)
    IF object_hierarchy_node_wa-ref_node_id IS INITIAL.
      ASSERT object_hierarchy_node_wa-provider_id IS NOT INITIAL.
    ENDIF.
Thanks in advance,
Louis

note: Note 1075650
Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
regards,
Prakesh.

I install IDES 4.7 in VMware, Why "unable to set time for file...."

system Windows2003
database Oracle 9
disk space : C(50G)D(80G)E(40G)
"Copying file C:/DOCUME1/ADMINI1/LOCALS~1/Temp/SAPinst/bootstrap_keydb.1.xml to: C:/SAPinst ORACLE SAPINST.
INFO 2014-01-26 16:22:47
Copying file C:/DOCUME1/ADMINI1/LOCALS~1/Temp/SAPinst/bootstrap_keydb.xml to: C:/SAPinst ORACLE SAPINST.
INFO 2014-01-26 16:22:47
Copying file C:/DOCUME1/ADMINI1/LOCALS~1/Temp/SAPinst/CONTROL.DTD to: C:/SAPinst ORACLE SAPINST.
ERROR 2014-01-26 16:22:47
FSL-02010 Unable to set time for file C:/SAPinst ORACLE SAPINST/CONTROL.DTD.
ERROR 2014-01-26 16:22:47
FJS-00012 Error when executing script."
who can help me ..please.....

Hello Matthew,
You should also change your temp directory to something woth no spaces, something like C:\temp.
Sapisnt sometimes has problems with the spaces in the temp path, and the Universal Installer nearly always
has a problem with this.
Regards,
David

Create Adobe Form using Design Time for Processes and Forms

Hi all,
I am trying to create a form that have 3 fields:
1. pernr
2. ename
3. effective_date
I done all the necessary setup of BADI ,class, interface and form.
I need the step to step guide where you create the adobe form using the Design Time for Processes and Forms. Anyone have any idea?
Edited by: Siong Chao on Jan 3, 2011 4:54 AM
Edited by: Siong Chao on Jan 3, 2011 5:00 AM

Hi,
I couldn't get to your query..
What do you mean by step by step procedure for a design time & process for forms.
if you are a beginner and looking for basic examples to implement adobe forms there are lot of them in SDN, please search them.
let me know if your query was a very specific one.
Cheers,
Sai

Step by Step documents for Process Chain Error Handling with Screen Shots

Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira Khan

Hi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards.

BI admin cockpit for process chains

Hi
Currently we are monitoring process chains(Daily data loads) on a daily basis ,Business users want the statstics of the process chains to be implemented in cockpits via BI admin cockpit( BI 7 version) .can some one tell how to implement BI admin cockpit for process chains.
If some one has some specific documents can you please mail then to my email: [email protected]
Thanks
Bhavana

Hi,
You need to install Business Content
Front End and OLAP Statistics (Aggregated) ( 0TCT_C01, 0TCT_VC01)
0TCT_C01
InfoCube 0TCT_C01 is a standard InfoCube that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
0TCT_VC01
InfoCube 0TCT_VC01 is a Virtual Provider that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
Front End and OLAP Statistics (Details) (0TCT_C02, 0TCT_VC02)
0TCT_C02
InfoCube 0TCT_C02 is a standard InfoCube that contains detail values for front end and query runtime statistics.
This InfoCube is used for monitors that display detail values for the query runtime object.
0TCT_VC02
InfoCube 0TCT_VC02 is a Virtual Provider that contains front end and query runtime statistics (details).
Data Manager Statistics (Details) (0TCT_C03, 0TCT_VC03)
0TCT_C03
InfoCube 0TCT_C03 is a standard InfoCube that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
0TCT_VC03
InfoCube 0TCT_VC03 is a Virtual Provider that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
DTP Statistics (0TCT_C22, 0TCT_VC22)
0TCT_C22
The InfoCube 0TCT_C22 is a Standard InfoCube that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
0TCT_VC22
The InfoCube 0TCT_VC22 is a Virtual Provider that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
InfoPackage Statistics (0TCT_C23, 0TCT_VC23)
0TCT_VC23
The InfoCube 0TCT_VC23 is a Virtual Provider that contains InfoPackage statistics or detailed information about the InfoPackage that are executed individually or in process chains.
0TCT_C23
The InfoCube 0TCT_C23 is a Standard InfoCube that contains InfoPackage statistics or detailed information about InfoPackages that are executed individually or within a process chain.
Process Statistics (0TCT_VC21, 0TCT_C21)
0TCT_VC21
The InfoCube 0TCT_VC21 is a Virtual Provider that contains process chain statistics or detailed information about process chains and process types that are successfully executed.
This InfoCube is used for all the monitors that display detailed information about process chain statistics and process statistics on the portal.
0TCT_C21
The InfoCube 0TCT_C21 is a Standard InfoCube that contains process statistics or details of processes that are executed individually or in process chains.
This InfoCube is used for monitors that display all the process runtimes on the portal.
Process Status (0TCT_VC12)
The InfoCube 0TCT_VC12 is a Virtual Provider that specifies the status of the process chain and detailed information about the process status.
BI Object Request Status (0TCT_VC11)
The InfoCube 0TCT_VC11 is a Virtual Provider that provides detailed information about requests in all the Data Targets and Master Data in characteristics.
Content Master Data
The process chain 0TCT_MD_C_FULL_P01 is used to load the content master data.
(e.g: Process Chain, Process Status, Web template, Process variant, Web item)
System Master Data
The process chain 0TCT_MD_S_FULL_P01 is used to load system master data.
e.g:BW Object type
Data Load Statistics Delta
The process chain 0TCT_C2_DELTA_P01 is used to load delta data for data load statistics.
The following processes are included in the process chain:
Process                         Target
0TCT_DS22_DELTA_DATAMART (B71)               DTP Statistics [0TCT_C22]
0TCT_DS23_DELTA_DATAMART (B71)              Info Package Statistics [0TCT_C23]
0TCT_DS21_DELTA_DATAMART (B71)              Process Statistics [0TCT_C21]
Query Runtime Statistics Delta
The process chain 0TCT_C0_DELTA_P01 is used to load delta data for query runtime statistics.
The following processes are included in the process chain:
Process                                   Target
0TCT_DS01_DELTA_DATAMART               Front end and OLAP statistics (aggregated) [ 0TCT_C01]
0TCT_DS02_DELTA_DATAMART             Front end and OLAP statistics (details) [0TCT_C02]
0TCT_DS03_DELTA_DATAMART              Data manager statistics (details) [0TCT_C03]

Cancel the scheduled jobs for process chains - urgent

Hi,
How do I cancel the scheduled jobs for process chains which are going to run tonight.
thanks,
Radha

Hello,
Go into transaction code RSPC and then select the particular process chain by going into the edit mode and in the menu...
Look for Execution --> Remove from Schedule.
Let me know if that answered your question.
Thanks
Dharma.

Need a table for process chains of when these are scheduled!!

Hi,
I had like to have list of all the process chains and their schedules of how often these are loaded and whether been triggered by event or directly scheduled. If periodically scheduled then the period----
is there any table which can have the information as i said??
Raj

Hi....
process chain tables
RSPC_BUFFER Shared Buffer for Processes (Esp. Customer
RSPC_MONITOR Monitor individual process chains
RSPCABAPASYNC Logging for ABAP Processes(Synchronously a
RSPCCATEGORY Process Type Categories
RSPCCATEGORYT Texts for Category
RSPCCHAIN Process chain
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Cha
RSPCENQUEUE Dummy Table for Runtime Locks of a Process
RSPCEXOR Excluding Or: Log Table
RSPCINFO Special Values for Communication between P
RSPCINFOT Special Values for Communication between P
RSPCINSTANCE Generic Instance Storage
RSPCINSTANCET Texts for Generic Instance-Storage
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGCROSS Cross-Table Log ID Old / Log ID New
RSPCLOGS Application Logs for the Process Chains (G
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPCTRIGGER Variants for the Trigger Processes
RSPCTRIGGERT Texts for the Trigger Variants
RSPCTYPESDEP Dependencies for Processes
RSPCTYPESPROC Attributes of BW processes (RSSM)
RSPCVARIANT Generic Variant-Storage
RSPCVARIANTATTR Attributes of a Process Variant
RSPCVARIANTT Texts for Generic Variant Storage
Among all these tables I think.......
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process
Chains
RSPCPROCESSLOG Logs for the Chain Runs .........can help you.......
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 21, 2008 1:32 PM

Display components for process chains

Hi all,
i remember a sap note or a how to guide to configure the display components for process chains as hierarchy like:
- my chains
    - daily
    - weekly
    - monthly
         - monthly admin
         - monthly xyz
but right now i find no information about that.
Do you?
thanks for your help.

Hi,
Check below threads -
Change the Directory of a Process chain.
Process chain: Moving chain from one u0093folderu0094 to the other
AleX

Test Scripts for Process Chains

Hi Gurus,
Can anybody send me the sample test scripts or the available links for process chains
to my mail Id. [email protected]
I will assign full points.
Thanks in adance.
Maruthi.

Hi Maruthi,
Please go through the belwo links and let me know if you need any specific information. Also you can find lot of threads in SDN
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0f4e952-e46e-2910-1f9e-cae187cd16d1
Assign points if its helpful.
Regards,
Jagadeesh.

Undefined status for process chains

Hello,
- when do you choose undefined status (grey) for process chains? (in what cases)
Thanks

Hi ,
when you are defining the Pc in planning view , then the color will be grey . In checking view - it will be green ( Successful ) , Yellow ( warnings) Or Red ( Failure) .
In the joboverview also , above discussed colors are stated for the Pc 's accordingly ..
Hope this helps out

Set time for process chain

Similar Messages

Maybe you are looking for